Tunable zinc benzamidinate complexes: coordination modes and catalytic activity in the ring-opening polymerization of L-lactide

Seven asymmetric zinc benzamidinate complexes featuring or lacking side-arm functionalities were synthesized. Using equimolar zinc reagent produced distinct dinuclear motifs [(C6H5-C = NC6H5)ZnEt]2 (R = tBu, 1; (CH2)2OMe, 2; (CH2)2NMe2, 3). Half the zinc reagent yielded dinuclear [(C6H5-C = NC6H5)2Zn]2 (R = tBu, 4) or mononuclear zinc bis(chelate) complexes (R = (CH2)2OMe, 5; (CH2)2NMe2, 6; CH2Py, 7). Molecular structures of 1-4 and 7 were determined via single-crystal X-ray diffraction. Altering benzamidinate substituents modifies both coordination modes and catalytic activities in ring-opening polymerization of L-lactide. Specifically, complex 7 exhibits enhanced catalytic activity at 25 °C using 100 equivalents of L-lactide with a turnover frequency of 1820 h-1.

Flexible NHC-aryloxido aluminum complex and its zwitterionic imidazolium aluminate precursor in ring-opening polymerization of ε-caprolactone

Anionic donor-functionalized NHC (N-heterocyclic carbene) complexes of Al are rare. We report one such case here, an NHC-aryloxido AlMe2 complex [Al(L)Me2] (2), following a stepwise synthesis from the proligand [HO-4,6-tBu2-C6H2-2-CH2{CH(NCHCHNAr)}]Br [LH2Br; Ar = 2,6-iPr2-C6H3 (Dipp)] and AlMe3via the zwitterionic intermediate [Al(LH)Me2Br] (1). The ligand's flexibility in 2 is evident from the conformational fluxionality revealed by VT-1H NMR spectroscopic analysis. The ∠O-Al-C (ca. 100.5°) bite angle is also wider than the ∠O-Ti-C (ca. 80.6°) as seen in our recently reported Ti complex [Ti(L)(NMe2)2Br]. DFT analysis showed that the CNHC-Al bond is significantly ionic, as is the CNHC-Ti bond. Both 1 and 2 are active in the ring-opening polymerization (ROP) of ε-caprolactone (CL). 2, similar to [Ti(L)(NMe2)2Br], exhibits bifunctional MLC-type monomer activation, but only at an elevated temperature. However, the 2/BnOH combination is catalytically active at room temperature, likely through a zwitterionic [Al(LH)Me2(OBn)]. The 1/BnOH combination follows a similar mechanism but surprisingly at a faster rate.

Well-Defined and Highly Effective Nickel Catalysts Coordinated on Tridentate SNO Schiff-Base Derivatives for Alternating Copolymerization of Epoxides and Anhydrides

A series of Ni complexes supported by SNO Schiff-base derivatives were synthesized in this study. Complex synthesis and characterization data are reported herein. Treatment of the pro-ligands [L¹-H = 2-(((2-(methylthio)ethyl)imino)methyl)phenol, L²-H = 2,4-di-tert-butyl-6-(((2-(methylthio)ethyl)imino)methyl)phenol, L³-H = 2-(((2-(methylthio)ethyl)imino)methyl)-4,6-bis(2-phenylpropan-2-yl)phenol, L⁴-H = 4-bromo-2-(((2-(methylthio)ethyl)imino)methyl)phenol, and L⁵-H = 4-chloro-2-(((2-(methylthio)ethyl)imino)methyl)phenol] with Ni(OAc)₂·4H₂O in refluxing ethanol afforded six-coordinate mono-Ni(II) complexes [L₂ⁿNi] (n = 1-5). Noteworthy, a heptanuclear nickel(II) octacarboxylate species complex 6 and dinuclear nickel complex 6a resulted from treatment of L⁶-H [4-fluoro-2-(((2-(methylthio)ethyl)imino)methyl)phenol] with different metal precursors [Ni(OAc)₂·4H₂O for 6; NiBr₂ for 6a] giving a quantitative yield. The reaction of nickel acetate tetrahydrate and L⁷-H to L⁹-H [L⁷-H = 2-methoxy-6-(((2-(methylthio)ethyl)imino)methyl)phenol, L⁸-H = 5-methoxy-2-(((2-(methylthio)ethyl)imino)methyl)phenol, and L⁹-H = 4-methoxy-2-(((2-(methylthio)ethyl)imino)methyl)phenol] produced the four-coordinate complexes [L₂ⁿNi] (n = 7-9). The highest performing catalyst was complex 3, which was highly efficient for the ring-opening copolymerization of phthalic anhydride (PA) and cyclohexene oxide (CHO) in the presence of a cocatalyst (4-dimethylaminopyridine). In addition, the same copolymerization conditions produced narrowly dispersed polyesters, with high selectivity and polymerization control. In addition to PA-CHO copolymerization, efficient diglycolic anhydride-PA and PA-propene oxide copolymerization was achieved under the same conditions. These catalysts are straightforward to produce and extend the scope of potential substrates.

Aluminium complexes containing indolyl-phenolate ligands as catalysts for ring-opening polymerization of cyclic esters

A family of aluminium complexes supported by mono-anionic indolyl-phenolate ligands are described. Reactions of indolyl-phenolate based ligand precursors, IndHPh^ROH, with 1.0 or 0.5 equivalents of AlMe₂Cl in toluene afforded aluminium indolyl-phenolate complexes 1-4 and aluminium bis-indolyl-phenolate complexes 5-8 respectively. The molecular structure is reported for 5. Based on the NMR spectroscopic and X-ray crystallographic studies, a 1,3-hydrogen shift could happen from nitrogen to carbon on the five-membered ring of the indolyl group upon reacting with aluminium reagents. These novel aluminium complexes demonstrate catalytic activities toward the ring-opening polymerization of cyclic esters in the presence of alcohol.

Titanium Complexes of Salicylbenzoxazole and Salicylbenzothiazole Ligands for the Ring-Opening Polymerization of ε-Caprolactone and Substituted ε-Caprolactones and Their Copolymerizations

Two series of titanium complexes, including salicylbenzoxazole titanium complexes (1-4) and salicylbenzothiazole titanium complexes (5-8), were successfully synthesized and characterized by NMR spectroscopy, elemental analysis, and X-ray diffraction crystallography (for 2 and 5). The ¹H NMR spectra of complexes 7 and 8 reveal fluxional behavior in solution at room temperature, and the activation parameters were determined by lineshape analysis of variable-temperature (VT) NMR spectra in toluene-d₈: for 7, ΔH^⧧ = 73.0 ± 1.8 kJ mol^-1, ΔS^⧧ = 22.1 ± 5.5 J mol^-1 K^-1; for 8, ΔH^⧧ = 73.7 ± 1.2 kJ mol^-1, ΔS^⧧ = 20.3 ± 3.8 J mol^-1 K^-1. The positive values of ΔS^⧧ suggested that the isomerization occurred via a dissociative mechanism. All complexes were active initiators for the ring-opening polymerization of ε-caprolactone (ε-CL) and three substituted ε-CLs: γ-methyl-ε-caprolactone (γMeCL), γ-ethyl-ε-caprolactone (γEtCL), and γ-phenyl-ε-caprolactone (γPhCL). Of all complexes, complex 5 was found to be the most active initiator in this study. The copolymerizations between ε-CL and three substituted ε-CLs produced completely random copolymers. The polymerization was proposed to proceed via a dissociative coordination-insertion mechanism. The catalytic activity of the salicylbenzoxazole titanium complex was lower than that of its closely related salicylbenzothiazole titanium congener. Additionally, DFT calculations unveiled that the ligand decoordination step and the less steric congestion at the titanium center in the salicylbenzothiazole titanium complexes were the key factors in enhancing the catalytic rate.

Uniform Core-Shell Microspheres of SiO2@MOF for CO2 Cycloaddition Reactions

A SiO₂@MOF core-shell microsphere for environmentally friendly applications was introduced in this study. Several types of metal-organic framework core-shell microspheres were successfully synthesized. To achieve high stability and favorable catalytic performance, modification and coating methods were necessary for optimization. The improved SiO₂@MOF core-shell microspheres were used in the cycloaddition reaction of carbon dioxide and propylene oxide. Dispersion ability was enhanced by the addition of core-shell microspheres, which also produced high catalytic activity. Accompanied with tetrabutylammonium bromide as a co-catalyst, SiO₂@ZIF-67 had a maximum conversion of 97%, and the results revealed that SiO₂@ZIF-67 could be used for 5 reaction cycles while maintaining high catalytic performance. This recycling catalyst was also reacted with a series of terminal epoxides to form corresponding cyclic carbonates with high conversion rates, indicating that SiO₂@MOF core-shell microspheres exhibit promise in the field of catalysis.

Ring-Opening Polymerization of ε-Caprolactone by Using Aluminum Complexes Bearing Aryl Thioether Phenolates: Labile Thioether Chelation

In this study, aluminum complexes bearing ferrocene-based and arylthiomethylphenolate ligands were synthesized, and their catalytic activity for ε-caprolactone (CL) polymerization was investigated. The catalytic activity of the reduced form of Al complexes was higher than that of the oxidized form. The CL polymerization rate of the reduced form fcO₂AlMe (75 min, conversion = 100%) was higher than that of the oxidized form fc^oxO₂AlMe (4320 min, conversion = 45%), and the CL polymerization rate of fc(OAlMe₂)₂ (40 min, conversion = 100%) was higher than that of fc^ox(OAlMe₂)₂ (60 min, conversion = 97%). Electron deficiency substituents on phenolate decreased the catalytic activity of Al complexes bearing arylthiomethylphenolate ligands. Density functional theory calculations revealed that thioether coordination stabilized the transition state (TS1) and that the oxidized form fc^ox(OAlMe₂)₂ exhibited weaker thioether coordination and higher activation energy in TS1 compared with those of the reduced form fcO₂AlMe. In addition, our study determined that the thioether group is a suitable chelating group for Al catalysts in CL polymerization due to its labile nature.

Formation of Mononuclear N,O-chelate Zirconium Complexes by Direct Insertion of Epoxide into Tetrakis(dimethylamido)zirconium: Highly Promising Approach for Developing ALD Precursor of ZrO2 Thin Film

A zirconium complex containing an N,O-chelate and alkylamide ligand has great potential for application in atomic layer deposition (ALD). However, the synthesis of this mononuclear Zr complex remains a major...

Titanium complexes of pyrrolylaldiminate ligands and their exploitation for the ring-opening polymerization of cyclic esters

A series of six-coordinate titanium complexes 1-6 supported by pyrrolylaldiminate ligands were prepared via the reaction of 2 equivalents of ligands and Ti(OⁱPr)₄ in toluene at 70 °C. The X-ray structure of 2 revealed that the two ligands were κ²-coordinated to the titanium center with the two pyrrole nitrogen atoms in trans positions and the two imine nitrogen atoms in cis positions. All complexes were active initiators for the ring-opening polymerization (ROP) of rac-lactide (rac-LA), ε-caprolactone (ε-CL), and three substituted ε-caprolactones (γ-methyl-ε-caprolactone (γMeCL), γ-ethyl-ε-caprolactone (γEtCL), and γ-phenyl-ε-caprolactone (γPhCL)). Polymerizations of all monomers were well controlled, affording predetermined molar masses and narrow dispersity values. Complex 5 exhibited the highest polymerization activities with rac-LA and ε-CL and its performance was comparable to other highly active six-coordinate titanium complexes reported thus far. Kinetic results revealed a first-order dependency on the monomer concentration, and the rate of polymerization was greatly influenced by the substituent on the imine nitrogen. End-group analysis of the isolated PLA and PCL suggested a coordination-insertion mechanism.

Collaboration between Trinuclear Aluminum Complexes Bearing Bipyrazoles in the Ring-Opening Polymerization of ε-Caprolactone

Trinuclear aluminum complexes bearing bipyrazoles were synthesized, and their catalytic activity for ε-caprolactone (CL) polymerization was investigated. D^Bu₂Al₃Me₅ exhibited higher catalytic activity than did the dinuclear aluminum complex L^Bu₂Al₂Me₄ (16 times as high for CL polymerization; [CL]:[D^Bu₂Al₃Me₅]:[BnOH] = 100:0.5:5, [D^Bu₂Al₃Me₅] = 10 mM, conversion 93% after 18 min at room temperature). Density functional theory calculations revealed a polymerization mechanism in which CL first approached the central Al atom and then moved to an external Al. The coordinated CL ring was opened because the repulsion of two tert-butyl groups on the ligands pushed an alkoxide initiator on an external Al to initiate CL. In these trinuclear Al catalysts, the central Al plays a role in monomer capture and then collaborates with the external Al to activate CL, accelerating polymerization.

Synthesis, structures, and catalytic efficiency in ring opening polymerization of rac-lactide with tridentate vs. bidentate cobalt(ii), zinc(ii), and cadmium(ii) complexes containing N-substituted N,N-bis((3,5-dimethyl-1H-pyrazol-1-yl)methyl)amine ligands

A series of Co(ii), Zn(ii), and Cd(ii) complexes supported by 1-(3,5-dimethyl-1H-pyrazol-1-yl)-N-((3,5-dimethyl-1H-pyrazol-1-yl)methyl)-N-(furan-2-ylmethyl)methanamine (L_A) and N,N-bis((3,5-dimethyl-1H-pyrazol-1-yl)methyl)-4-isopropylaniline (L_B) were synthesized. The direct chelation of CoCl₂·6H₂O, ZnCl₂, and CdBr₂·4H₂O by the ligands produced [L_nMX₂] (L_n = L_A or L_B; M = Zn or Co, with X = Cl; M = Cd, with X = Br) complexes in high yields. Structural studies revealed that [L_BCoCl₂] and [L_BZnCl₂] adopted distorted tetrahedral geometries, as L_B coordinated the metal centers in a bidentate fashion, while L_A coordinated the metal centers in a tridentate fashion through the nitrogen atoms of the pyrazole and amine moieties, so that [L_ACoCl₂] and [L_AZnCl₂] exhibited trigonal bipyramidal geometries and [L_ACdBr₂] a square pyramidal geometry. [L_BCdBr₂] has two Cd-containing structures per unit cell, whereby one Cd center adopted a distorted tetrahedral geometry and the other exhibited square bipyramidal geometry. The in situ-generated alkyl derivatives of the synthesized complexes were assessed in the ring-opening polymerization of rac-lactide. Heterotactic polylactides (PLAs) were furnished with all complexes. The [L_BZnCl₂]/MeLi system produced PLA with a superior heterotactic bias (P_r up to 0.94) at −25 °C. PLAs with wide-ranging polydispersity indices (1.16–2.23) and low molecular weights were produced in all cases, irrespective of the specific M(II) center and ancillary ligand utilized.

Co(ii), Zn(ii), and Cd(ii) complexes supported by bis-pyrazolyl ligands were applied to the ring-opening polymerization of rac-lactide to produce heterotactic polylactides (PLAs) with superior heterotactic bias i.e. P_r up to 0.94 at −25 °C.

Use of pyrazoles as ligands greatly enhances the catalytic activity of titanium iso-propoxide for the ring-opening polymerization of l-lactide: a cooperation effect

Using TiOⁱPr₄ with a pyrazole ligand for one-pot LA polymerization improved catalytic activity compared with using TiOⁱPr₄ only. At 60 °C, TiOⁱPr₄ with ^furPz exhibited a higher catalytic activity (approximately 3-fold) than TiOⁱPr₄. At room temperature, TiOⁱPr₄ with ^BuPz exhibited a higher catalytic activity (approximately 17-fold) than TiOⁱPr₄. High molecular mass PLA (M _nGPC = 51 100, and Đ = 1.10) could be produced by using TiOⁱPr₄ with ^furPz in melt polymerization ([TiOⁱPr₄] : [^furPz] = 1000 : 1 : 1 at 100 °C, 240 min). The crystal structure of ^MePz₂Ti₂OⁱPr₇ revealed the cooperative activation between two Ti atoms during LA polymerization.

Synthesis and Characterization of N,N,O-Tridentate Aminophenolate Zinc Complexes and Their Catalysis in the Ring-Opening Polymerization of Lactides

A series of aminophenolate ligands with various pendant groups and associated ethyl Zn complexes were synthesized and studied as catalysts for the ring-opening polymerization (ROP) of lactides (LAs). The thiophenylmethyl group (L⁴ZnEt) increased the catalytic activity more than the benzyl group (L¹ZnEt) did, and 2-fluorobenzyl (L³ZnEt) and 2-methoxybenzyl (L²ZnEt) groups had the opposite effect. In addition, the LA polymerization mechanism proved by Nuclear Magnetic Resonance and Density Function Theory was that LA was attracted by H···O bond of an α-hydrogen of the LA molecule and the phenoxyl oxygen of the catalyst. After the dissociation of amino group from the Zn atom, the benzyl alcohol initiated LA without replacing the ethyl group of Zn complex. It is the first case where the ethyl group is regarded as a ligand and cannot be replaced by benzyl alcohol, and this information is very important for the mechanism study of ROP.

Mono- and dinuclear copper complexes coordinated on NNO-tridentate Schiff-base derivatives for copolymerization of cyclohexene oxide and cyclic anhydrides

A series of bimetallic penta-coordinated copper complexes [Lⁿ₂Cu₂(OAc)₂] (1, 3-7), a mononuclear tetra-coordinated copper complex [LⁿCu(OAc)] (8 and 9), and a penta-coordinated copper complex [L²Cu(OAc)(H₂O)] (10) were prepared by the reaction of Cu(OAc)₂·H₂O with a variety of NNO-tridentate Schiff-base ligands (L¹-H-L⁹-H) in refluxing 95% ethanol, respectively. However, a dinuclear copper complex [(L²)₂Cu₂(OAc)₂] (2) can be obtained from the treatment of L²-H with a stoichiometric amount of anhydrous Cu(OAc)₂ in refluxing absolute EtOH under a dry nitrogen atmosphere. All of these copper complexes are active for the alternating copolymerization of cyclohexene oxide and cyclic anhydride, affording polyesters with moderate polydispersity. In particular, dinuclear copper complexes 1 and 2 performed satisfactorily to produce polyesters with controllable molecular weights and high ester linkages. This is the first example of well-defined copper acetate catalysts active for the copolymerization of cyclohexene oxide-phthalic anhydride or cyclohexene oxide-succinic anhydride which may be advantageous in terms of obviating the use of co-catalysts and low cost as well as an effective copolymerization for the formation of biodegradable polyesters in a controlled fashion.

Synthesis and characterization of trimetallic cobalt, zinc and nickel complexes containing amine-bis(benzotriazole phenolate) ligands: efficient catalysts for coupling of carbon dioxide with epoxides

New trimetallic cobalt, nickel and zinc complexes 1-3 coordinated by amine-bis(benzotriazole phenolate) ligands and ancillary acetate groups have been developed for the use of CO₂/epoxide coupling. All complexes were structurally characterized by single crystal X-ray crystallography; tri-Co complex 1 is the first solid-state example in which three different geometrical configurations exist in the same benzotriazole phenoxide metal complex. Tri-nuclear complexes 1 and 2 with cobalt and zinc metal centers were demonstrated to be very active catalysts for cycloaddition of cyclohexene oxide with CO₂ in the presence of ammonium salt co-catalysts to give cis-cyclohexene carbonate under the conditions of 80 °C and 300 psi initial CO₂ pressure. Particularly, tri-cobalt complex 1 was found to efficiently couple CO₂ with epoxides showing broad substrate scope, producing the corresponding cyclic organic carbonates with good activities and high selectivities. This is a successful example of catalysis for cyclic carbonate synthesis using one cobalt(ii) complex as a homogeneous catalyst.

Nb and Ta benzotriazole or benzoxazole phenoxide complexes as catalysts for the ring-opening polymerization of glycidol to synthesize hyperbranched polyglycerols

A series of novel mononuclear (1a-7a and 1b-6b) as well as tetranuclear (8a and 9a) niobium (Nb) and tantalum (Ta) complexes of benzotriazole or benzoxazole phenoxide pro-ligands bearing different substituents at the ortho and para positions of the phenol rings were synthesized and characterized. The reaction of NbCl₅ or TaCl₅ with one equivalent of benzotriazole or benzoxazole phenoxide pro-ligands (L1H-L6H) in dry toluene or chloroform produced the corresponding chloride (1a-6a and 1b-6b) and ethoxy (7a) mononuclear Nb and Ta complexes in high yields. Furthermore, from the mononuclear Nb complexes (1a or 4a), a new structural form of tetrameric niobium complexes (8a and 9a) was synthesized through a controlled hydrolysis reaction. The molecular structures of complexes 1b, 4b, 7a, 8a and 9a were unambiguously confirmed by single crystal X-ray diffraction analyses. Furthermore, all these complexes (1a-9a and 1b-6b) were tested as catalysts for the ring-opening polymerisation (ROP) of glycidol to synthesize hyperbranched polyglycerols (HPG) by using 1,1,1-tris(hydroxymethyl)propane (TMP) as an initiator. The degree of branching (DB) observed was 0.30-0.54, which is an indication of hyperbranched structures. In particular, for the niobium complex with electron-withdrawing substituents on the benzoxazole phenoxide pro-ligand (5a), we achieved superior behavior for the ROP of glycidol in terms of activity, control of molecular weight (M_n) and molecular weight distributions (MWDs) (92% of glycidol to HPG, M_n = 10.52 kg mol^-1, MWDs <1.33, DB = 0.53 and T_g = -57 °C). A highly hydrophilic nature was observed for the synthesized HPG polymer by water contact angle measurement (20° to 35°).

New homoleptic bis(pyrrolylpyridiylimino) Mg(ii) and Zn(ii) complexes as catalysts for the ring opening polymerization of cyclic esters via an "activated monomer" mechanism

The reaction of MgBu₂ and ZnEt₂ or Zn{N[Si(CH₃)₃]₂}₂ with a tridentate monoanionic pyrrolylpyridiylimino [N^-,N,N] proligand gave homoleptic species, as exclusive products, in high yields. The complexes were characterized in solution by 1D and 2D NMR analysis and by single crystal X-ray crystallography. The new homoleptic complexes were tested as initiators in the polymerization of ε-caprolactone and lactide in the presence of an exogenous alcohol. For both complexes, the polymerizations proceed via an "activated monomer" mechanism that, in the case of the magnesium complex, was correlated with the coordinative flexibility of the ligands, resulting in extremely high productivities under mild conditions.