Impact of N-donor auxiliary ligands on two new Co(II)-based MOFs with N-heterocyclic ligands and magnetism study

Two new cobalt(II) MOFs, namely [Co2(L)2(4,4′-bipy)]n (1) and {[Co(L)(dib)0.5(H2O)2]·H2O}n (2) were obtained by the self-assembly of Co(NO3)2·6H2O with V-shaped 2,4-[6-(4-carboxyphenyl)pyrazin-2-yl]benzoic acid (H2L) in the presence of two bridging auxiliary N-donor...

Cobalt-based metal–organic frameworks as functional materials for battery applications

Research progress on cobalt-based metal–organic frameworks as functional materials for battery applications has been presented.

Magnetic Properties of End-to-End Azide-Bridged Tetranuclear Mixed-Valence Cobalt(III)/Cobalt(II) Complexes with Reduced Schiff Base Blocking Ligands and DFT Study

Two tetranuclear mixed-valence cobalt(III/II) complexes having the general formula [(μ1,3-N3){CoII(L n )(μ-O2CC6H4NO2)CoIII(N3)}2]PF6 (where H2L1 and H2L2 are two reduced Schiff base ligands) have been synthesized and characterized. The structures of both complexes show cobalt(II) and cobalt(III) centers with a distorted octahedral geometry with cobalt(III) and cobalt(II) centers located at the inner N2O2 and outer O4 cavities of the reduced Schiff base ligands, respectively. The oxidation states of both cobalt centers have been confirmed by bond valence sum (BVS) calculations. The magnetic properties show that both compounds behave as cobalt(II) dimers connected through an end-to-end azido bridging ligand and show moderate antiferromagnetic Co(II)-Co(II) couplings of -11.0 and -14.4 cm-1 for 1 and 2, respectively, as also corroborated by DFT calculations, J theo = -13.07 cm-1 for 1 and -12.49 cm-1 for 2. The calculated spin densities of both complexes at the cobalt(II) centers are -2.75 and +2.75, respectively, clearly supporting that they are the magnetic centers.

Crystal structure of poly[di-μ2-aqua)-diaqua-bis(μ6-4,4′,4′′-(benzene-1,3,5-triyltris(oxy))tribenzoato-κ6O1:O2:O3:O3:O5:O6)tricadmium(II)] dihydrate, C54H42Cd3O24

C54H42Cd3O24, triclinic, P1̄ (no. 2), a = 7.9122(5) Å, b = 9.0693(6) Å, c = 18.6637(11) Å, β = 100.765(6)°, V = 1241.99(15) Å3, Z = 1, R gt(F) = 0.0266, wR ref(F 2) = 0.0646, T = 293(2) K.

Selective and Recyclable Sensing of Aqueous Phase 2,4,6-Trinitrophenol (TNP) Based on Cd(II) Coordination Polymer with Zwitterionic Ligand

A novel coordination polymer, {[Cd4(Dccbp)4]·H2O} (1) (Dccbp = 3,5-dicarboxy-1-(3-carboxybenzyl)pyridin-1-ium) was synthesized under hydrothermal conditions by a zwitterionic organic ligand and characterized by single crystal X-ray diffraction, infrared spectrum (IR), thermogravimetric analysis (TG), powder X-ray diffraction (PXRD) and luminescence. Complex 1 with a pyridine cation basic skeleton has the potential to serve as the first case of a luminescent material based on the zwitterionic type of organic ligand for selective, sensitive, and recyclable sensing of 2,4,6-trinitrophenol in the aqueous phase.

Pristine Metal-Organic Frameworks and their Composites for Energy Storage and Conversion

Metal-organic frameworks (MOFs), a new class of crystalline porous organic-inorganic hybrid materials, have recently attracted increasing interest in the field of energy storage and conversion. Herein, recent progress of MOFs and MOF composites for energy storage and conversion applications, including photochemical and electrochemical fuel production (hydrogen production and CO₂ reduction), water oxidation, supercapacitors, and Li-based batteries (Li-ion, Li-S, and Li-O₂ batteries), is summarized. Typical development strategies (e.g., incorporation of active components, design of smart morphologies, and judicious selection of organic linkers and metal nodes) of MOFs and MOF composites for particular energy storage and conversion applications are highlighted. A broad overview of recent progress is provided, which will hopefully promote the future development of MOFs and MOF composites for advanced energy storage and conversion applications.

A photochromic zinc-based coordination polymer for a Li-ion battery anode with high capacity and stable cycling stability

A zinc-based coordination polymer with photochromic 4,4′-bipyridinium derivatives as redox active building units is demonstrated as an anode material for Li-ion batteries.

Organic-inorganic hybrid materials from divalent metal cations and expanded N,N′-donor linkers

The rod-shaped linker (E,E)-N,N′-(3,3′-dimethyl-4,4′-biphenyldiyl)bis[1-(3-pyridinyl)methanimine] (L) is exploited for the first time in the synthesis of extended structures. Four new coordination polymers of composition {[ZnL(OAc)2]·EtOH}n (1), {[CdL(OAc)2]·MeOH}n (2), {[Cu2L(OAc)4]·CH2Cl2}n (3) and [MnL(N3)2]n (4) have been structurally characterized. The metal cations and the anionic ancillary ligands play pivotal roles for the topology of these compounds. In the crystalline reaction products of Zn(II), Cd(II) and Cu(II) acetate with the organic linker, the acetate anions connects two neighboring cations to dinuclear [M2(OAc)4] subunits. These secondary building units are further crosslinked by the N,N′-donor ligand, either perpendicular to the acetato bridges, leading to a ladder-like ribbon for 1 and 2, or in the direction of the metal···metal separation, resulting in a simple chain in the case of 3. Instead of dinuclear secondary building units, a different topology results from reaction of the N,N′ linker with Mn(ClO4)2 in the presence of azide anions: 1,3 bridging by the N3 − groups leads to infinite chains. These are crosslinked by L in perpendicular direction, and the layer structure 4 is obtained. Natural bond orbital (NBO) analyses revealed information on the basis of orbital interactions about the coordination environments of the metal ions. Thermogravimetric measurements indicate the highest thermal stability for 2. Strong antiferromagnetic coupling within the dinuclear subunits of 3 is observed as a consequence of superexchange via the acetato bridges.

Pillared-Layer Metal-Organic Frameworks for Improved Lithium-Ion Storage Performance

Recently, more and more metal-organic frameworks (MOFs) have been directly used as anodic materials in lithium-ion batteries, but judicious design or choice of MOFs is still challenging for lack of structural-property knowledge. In this article we propose a pillared-layer strategy to achieve improved Li-storage performance. Four Mn(II) and Co(II) MOFs with mixed azide and carboxylate ligands were studied to illustrate the strategy. In these 3D MOFs, layers (1, 3, and 4) or chains (2) with short bridges are linked by long organic spacers. All the MOFs show very high lithiation capacity (1170-1400 mA h g^-1 at 100 mA g^-1) in the first cycle owing to the rich insertion sites arising from the azide ion and the aromatic ligands. After the formation cycles, the reversible capacities of the anodes from 1, 3, and 4 are kept at a high level (580-595 mA h g^-1) with good rate and cycling performance, while the anode from 2 undergoes a dramatic drop in capacity. All the MOFs lose the crystallinity after the first cycle. While the amorphization of the chain-based framework of 2 leads to major irreversible deposit of Li ions, the amorphous phases derived from the pillared-layer frameworks of 1, 3, and 4 still retain rich accessible space for reversible insertion and diffusion of active Li ions. Consistent with the analysis, electrochemical impedance spectra revealed that the pillared-layer MOFs led to significantly smaller charge-transfer resistances than 2. Soft X-ray absorption spectroscopy suggested that no metal conversion is involved in the lithiation process, consistent with the fact that the isomorphous Co(II) (3) and Mn(II) (4) MOFs are quite similar in anodic performance.

Distinct Chromic and Magnetic Properties of Metal-Organic Frameworks with a Redox Ligand

An electron-deficient and potentially chromic ligand has been utilized to impart redox activity, photo- and hydrochromism, and solvotomagnetism to metal-organic frameworks (MOFs). A pair of MOFs were constructed from the flexible zwitterionic viologen-tethered tetracarboxylate linker N,N'-bis(3,5-dicarboxylatobenzyl)-4,4'-bipyridinium (L^2-): [Co₃(L)(N₃)₄] (1) and [Mn₂(L)(N₃)₂(H₂O)₂]·3H₂O (2). Both compounds show three-dimensional frameworks in which mixed azido- and carboxylato-bridged chains are connected through the electron-deficient viologen moieties. The chain in 1 is built from alternating bis(azide) and (azide)bis(carboxylate) bridges, while that in 2 contains uniform (azide) (carboxylate) bridges. The MOFs shows the characteristic redox properties of the viologen moieties. The redox activity affords the MOFs with different chromic properties, owing to subtle differences in chemical environments. 1 shows reversible photochromism, which is related to the radical formation through photoinduced electron transfer from azide-carboxylate to viologen according to UV-vis, X-ray photoelectron, and electron spin resonance spectroscopy and DFT calculations. 2 is nonphotochromic for lack of appropriate pathways for electron transfer. Unexpectedly, 2 shows a novel type of solid-state hydrochromism. Upon the removal and reabsorption of water, the compound shows remarkable color change because of reversible electron transfer accompanying a reversible structural transformation. The radical mechanism is distinct from those for traditional hydrochromic inorganic and organic materials. Magnetic studies indicate ferro- and antiferromagnetic coupling in 1 and 2, respectively. What's more, 2 shows marked magnetic response to the removal of water molecules owing to the formation of radicals. The compound illustrates a unique material exhibiting dual responses (color and magnetism) to water.

The diversities of magnetic behaviors appearing simultaneously in three isomorphs based on 1H-tetrazolyl-acetic acid ligand

There isomorphous complexes with 1H-tetrazolyl-acetic acid (TAA) have been synthesized, showing diverse magnetic properties: typical antiferromagnetic for 1, ferromagnetic for 2 and the spin glass behaviour for 3.