An automated microreactor for semi-continuous biosensor measurements

Biosensors in Monitoring Water Quality and Safety: An Example of a Miniaturizable Whole-Cell Based Sensor for Hg2+ Optical Detection in Water

Inorganic mercury (Hg2+) pollution of water reserves, especially drinking water, is an important issue in the environmental and public health field. Mercury is reported to be one of the most dangerous elements in nature since its accumulation and ingestion can lead to a series of permanent human diseases, affecting the kidneys and central nervous system. All the conventional approaches for assaying Hg2+ have some limitations in terms of bulky instruments and the cost and time required for the analysis. Here, we describe a miniaturizable and high-throughput bioluminescence sensor for Hg2+ detection in water, which combines the specificity of a living bacterial Hg2+ reporter cell, used as sensing element, with the performance of a silicon photomultiplier, used as optical detector. The proposed system paves the basis for portable analysis and low reactants consumption. The aim of the work is to propose a sensing strategy for total inorganic mercury evaluation in water. The proposed system can lay the basis for further studies and validations in order to develop rapid and portable technology that can be used in situ providing remote monitoring.

Combinatorial Sensor Design in Caulobacter crescentus for Selective Environmental Uranium Detection

The ability to detect uranium (U) through environmental monitoring is of critical importance for informing water resource protection and nonproliferation efforts. While technologies exist for environmental U detection, wide-area environmental monitoring, i.e. sampling coverage over large areas not known to possess U contamination, remains a challenging prospect that necessitates the development of novel detection approaches. Herein, we describe the development of a whole-cell U sensor by integrating two functionally independent, native U-responsive two-component signaling systems (TCS), UzcRS and UrpRS, within an AND gate circuit in the bacterium Caulobacter crescentus. Through leverage of the distinct but imperfect selectivity profiles of both TCS, this combinatorial approach enabled greater selectivity relative to a prior biosensor developed with UzcRS alone; no cross-reactivity was observed with most common environmental metals (e.g, Fe, As, Cu, Ca, Mg, Cd, Cr, Al) or the U decay-chain product Th, and the selectivity against Zn and Pb was significantly improved. In addition, integration of the UzcRS signal amplifier protein UzcY within the AND gate circuit further enhanced overall sensitivity and selectivity for U. The functionality of the sensor in an environmental context was confirmed by detection of U concentrations as low as 1 μM in groundwater samples. The results highlight the value of a combinatorial approach for constructing whole-cell sensors for the selective detection of analytes for which there are no known evolved regulators.

A Microfluidic Biodisplay

Synthetically engineered cells are powerful and potentially useful biosensors, but it remains problematic to deploy such systems due to practical difficulties and biosafety concerns. To overcome these hurdles, we developed a microfluidic device that serves as an interface between an engineered cellular system, environment, and user. We created a biodisplay consisting of 768 individually programmable biopixels and demonstrated that it can perform multiplexed, continuous sampling. The biodisplay detected 10 μg/L sodium-arsenite in tap water using a research grade fluorescent microscope, and reported arsenic contamination down to 20 μg/L with an easy to interpret "skull and crossbones" symbol detectable with a low-cost USB microscope or by eye. The biodisplay was designed to prevent release of chemical or biological material to avoid environmental contamination. The microfluidic biodisplay thus provides a practical solution for the deployment and application of engineered cellular systems.

Mechanistic Modeling of Genetic Circuits for ArsR Arsenic Regulation

Bioreporters are living cells that generate an easily measurable signal in the presence of a chemical compound. They acquire their functionality from synthetic gene circuits, the configuration of which defines the response signal and signal-to-noise ratio. Bioreporters based on the Escherichia coli ArsR system have raised significant interest for quantifying arsenic pollution, but they need to be carefully optimized to accurately work in the required low concentration range (1-10 μg arsenite L^-1). To better understand the general functioning of ArsR-based genetic circuits, we developed a comprehensive mechanistic model that was empirically tested and validated in E. coli carrying different circuit configurations. The model accounts for the different elements in the circuits (proteins, DNA, chemical species), and their detailed affinities and interactions, and predicts the (fluorescent) output from the bioreporter cell as a function of arsenite concentration. The model was parametrized using existing ArsR biochemical data, and then complemented by parameter estimations from the accompanying experimental data using a scatter search algorithm. Model predictions and experimental data were largely coherent for feedback and uncoupled circuit configurations, different ArsR alleles, promoter strengths, and presence or absence of arsenic efflux in the bioreporters. Interestingly, the model predicted a particular useful circuit variant having steeper response at low arsenite concentrations, which was experimentally confirmed and may be useful as arsenic bioreporter in the field. From the extensive validation we expect the mechanistic model to further be a useful framework for detailed modeling of other synthetic circuits.

Miniaturized and integrated whole cell living bacterial sensors in field applicable autonomous devices

Live-cell based bioreporters are increasingly being deployed in microstructures, which facilitates their handling and permits the development of instruments that could perform autonomous environmental monitoring. Here we review recent developments of on-chip integration of live-cell bioreporters, the coupling of their reporter signal to the devices, their longer term preservation and multi-analyte capacity. We show examples of instruments that have attempted to fully integrate bioreporters as their sensing elements.

Towards improved biomonitoring tools for an intensified sustainable multi-use environment

The increasing use of our environment for multiple contrasting activities (e.g. fisheries, tourism) will have to be accompanied by improved monitoring of environmental quality, to avoid transboundary conflicts and ensure long-term sustainable intensified usage. Biomonitoring approaches are appropriate for this, since they can integrate biological effects of environmental exposure rather than measure individual compound concentrations. Recent advances in biomonitoring concepts and tools focus on single-cell assays and purified biological components that can be miniaturized and integrated in automated systems. Despite these advances, we are still very far from being able to deploy bioassays routinely in environmental monitoring, mostly because of lack of experience in interpreting responses and insufficient robustness of the biosensors for their environmental application. Further future challenges include broadening the spectrum of detectable compounds by biosensors, accelerate response times and combining sample pretreatment strategies with bioassays.