Efficient analysis of a small number of cancer cells at the single-cell level using an electroactive double-well array

Microfluidic-Based Electrical Operation and Measurement Methods in Single-Cell Analysis

Cellular heterogeneity plays a significant role in understanding biological processes, such as cell cycle and disease progression. Microfluidics has emerged as a versatile tool for manipulating single cells and analyzing their heterogeneity with the merits of precise fluid control, small sample consumption, easy integration, and high throughput. Specifically, integrating microfluidics with electrical techniques provides a rapid, label-free, and non-invasive way to investigate cellular heterogeneity at the single-cell level. Here, we review the recent development of microfluidic-based electrical strategies for single-cell manipulation and analysis, including dielectrophoresis- and electroporation-based single-cell manipulation, impedance- and AC electrokinetic-based methods, and electrochemical-based single-cell detection methods. Finally, the challenges and future perspectives of the microfluidic-based electrical techniques for single-cell analysis are proposed.

On-chip dielectrophoretic single-cell manipulation

Bioanalysis at a single-cell level has yielded unparalleled insight into the heterogeneity of complex biological samples. Combined with Lab-on-a-Chip concepts, various simultaneous and high-frequency techniques and microfluidic platforms have led to the development of high-throughput platforms for single-cell analysis. Dielectrophoresis (DEP), an electrical approach based on the dielectric property of target cells, makes it possible to efficiently manipulate individual cells without labeling. This review focusses on the engineering designs of recent advanced microfluidic designs that utilize DEP techniques for multiple single-cell analyses. On-chip DEP is primarily effectuated by the induced dipole of dielectric particles, (i.e., cells) in a non-uniform electric field. In addition to simply capturing and releasing particles, DEP can also aid in more complex manipulations, such as rotation and moving along arbitrary predefined routes for numerous applications. Correspondingly, DEP electrodes can be designed with different patterns to achieve different geometric boundaries of the electric fields. Since many single-cell analyses require isolation and compartmentalization of individual cells, specific microstructures can also be incorporated into DEP devices. This article discusses common electrical and physical designs of single-cell DEP microfluidic devices as well as different categories of electrodes and microstructures. In addition, an up-to-date summary of achievements and challenges in current designs, together with prospects for future design direction, is provided.

Validation of an on-chip p16ink4a/Ki-67 dual immunostaining cervical cytology system using microfluidic device technology

More specific screening systems for cervical cancer may become necessary as the human papillomavirus (HPV) vaccine becomes more widespread. Although p16/Ki-67 dual-staining cytology has several advantages, it requires advanced diagnostic skills. Here, we developed an automated on-chip immunostaining method using a microfluidic device. An electroactive microwell array (EMA) microfluidic device with patterned thin-film electrodes at the bottom of each microwell was used for single-cell capture by dielectrophoresis. Immunostaining and dual staining for p16/Ki-67 were performed on diagnosed liquid cytology samples using the EMA device. The numbers of p16/Ki-67 dual-stained cells captured by the EMA device were determined and compared among the cervical intraepithelial neoplasia (CIN) lesion samples. Seven normal, fifteen CIN grade 3, and seven CIN grade 2 samples were examined. The percentage of dual-positive cells was 18.6% in the CIN grade 2 samples and 23.6% in the CIN grade 3 samples. The percentages of dual-positive staining increased significantly as the severity of the cervical lesions increased. p16/Ki67 dual immunostaining using the EMA device is as sensitive as the conventional method of confirming the histopathological diagnosis of cervical samples. This system enables a quantified parallel analysis at the individual cell level.

Quantification of capture efficiency, purity, and single-cell isolation in the recovery of circulating melanoma cells from peripheral blood by dielectrophoresis

This paper describes a dielectrophoretic method for selection of circulating melanoma cells (CMCs), which lack reliable identifying surface antigens and are extremely rare in blood. This platform captures CMCs individually by dielectrophoresis (DEP) at an array of wireless bipolar electrodes (BPEs) aligned to overlying nanoliter-scale chambers, which isolate each cell for subsequent on-chip single-cell analysis. To determine the best conditions to employ for CMC isolation in this DEP-BPE platform, the static and dynamic dielectrophoretic response of established melanoma cell lines, melanoma cells from patient-derived xenografts (PDX) and peripheral blood mononuclear cells (PBMCs) were evaluated as a function of frequency using two established DEP platforms. Further, PBMCs derived from patients with advanced melanoma were compared with those from healthy controls. The results of this evaluation reveal that each DEP method requires a distinct frequency to achieve capture of melanoma cells and that the distribution of dielectric properties of PBMCs is more broadly varied in and among patients versus healthy controls. Based on this evaluation, we conclude that 50 kHz provides the highest capture efficiency on our DEP-BPE platform while maintaining a low rate of capture of unwanted PBMCs. We further quantified the efficiency of single-cell capture on the DEP-BPE platform and found that the efficiency diminished beyond around 25% chamber occupancy, thereby informing the minimum array size that is required. Importantly, the capture efficiency of the DEP-BPE platform for melanoma cells when using optimized conditions matched the performance predicted by our analysis. Finally, isolation of melanoma cells from contrived (spike-in) and clinical samples on our platform using optimized conditions was demonstrated. The capture and individual isolation of CMCs, confirmed by post-capture labeling, from patient-derived samples suggests the potential of this platform for clinical application.

Parallel Dielectrophoretic Capture, Isolation, and Electrical Lysis of Individual Breast Cancer Cells to Assess Variability in Enzymatic Activity

Tumor cell heterogeneity drives disease progression and response to therapy, and therefore, there is a need for single-cell analysis methods. In this paper, we present an integrated, scalable method to analyze enzymatic activity in many individual cancer cells at once. The reported method uses dielectrophoresis (DEP) to selectively capture tumor cells at wireless electrodes aligned to an overlying array of cell-sized micropockets. Following hydrodynamic transfer of the captured cells into microfluidic chambers, the chambers are fluidically isolated and sealed with a hydrophobic ionic liquid, which possesses sufficient conductivity to allow for subsequent electrical lysis of the cells to access their contents for enzymatic assay. The wireless electrodes have an interlocking spiral design that ensures successful electrical lysis regardless of the location of the cell within the chamber. Here, breast cancer cells are assessed for β-galactosidase through its activation of a fluorogenic substrate. A key point is that the fluorogenic assay solution was optimized to allow for dielectrophoretic cell capture, thereby obviating the need for a solution exchange step. Our approach has several distinct advantages including a high rate of single-cell capture, a capture efficiency that is independent of the dimensions of the reaction chambers, no need for mechanical closure of reaction volumes, and no observed cross-talk. In this study, first, the steps of cell capture, transfer, and lysis are established on this platform in the presence of the optimized assay solution. We then quantify the increase in fluorescence intensity obtained over the duration of the enzymatic assay of individual cells. Finally, this method is applied to the analysis of β-galactosidase activity in 258 individual MDA-MB-231 breast cancer cells, revealing heterogeneity in expression of this enzyme in this cell line. We expect that the adaptability of this method will allow for expanded studies of single-cell enzymatic expression and activity. This will in turn open avenues of research into cancer cell heterogeneity in metabolism, invasiveness, and drug response. The ability to study these features of cancer at the single-cell level raises the possibility for treatment plans tailored to target the specific combinations of cell subpopulations present in tumors. Furthermore, we expect that this method can be adapted to uses outside of cancer research, such as studies of neuron metabolism, pathogenesis in bacteria, and stem cell development.

Highly efficient cell-microbead encapsulation using dielectrophoresis-assisted dual-nanowell array

Recent advancements in micro/nanofabrication techniques have led to the development of portable devices for high-throughput single-cell analysis through the isolation of individual target cells, which are then paired with functionalized microbeads. Compared with commercially available benchtop instruments, portable microfluidic devices can be more widely and cost-effectively adopted in single-cell transcriptome and proteome analysis. The sample utilization and cell pairing rate (∼33%) of current stochastic-based cell-bead pairing approaches are fundamentally limited by Poisson statistics. Despite versatile technologies having been proposed to reduce randomness during the cell-bead pairing process in order to statistically beat the Poisson limit, improvement of the overall pairing rate of a single cell to a single bead is typically based on increased operational complexity and extra instability. In this article, we present a dielectrophoresis (DEP)-assisted dual-nanowell array (ddNA) device, which employs an innovative microstructure design and operating process that decouples the bead- and cell-loading processes. Our ddNA design contains thousands of subnanoliter microwell pairs specifically tailored to fit both beads and cells. Interdigitated electrodes (IDEs) are placed below the microwell structure to introduce a DEP force on cells, yielding high single-cell capture and pairing rates. Experimental results with human embryonic kidney cells confirmed the suitability and reproducibility of our design. We achieved a single-bead capture rate of >97% and a cell-bead pairing rate of >75%. We anticipate that our device will enhance the application of single-cell analysis in practical clinical use and academic research.

Trapping of a Single Microparticle Using AC Dielectrophoresis Forces in a Microfluidic Chip

Precise trap and manipulation of individual cells is a prerequisite for single-cell analysis, which has a wide range of applications in biology, chemistry, medicine, and materials. Herein, a microfluidic trapping system with a 3D electrode based on AC dielectrophoresis (DEP) technology is proposed, which can achieve the precise trapping and release of specific microparticles. The 3D electrode consists of four rectangular stereoscopic electrodes with an acute angle near the trapping chamber. It is made of Ag-PDMS material, and is the same height as the channel, which ensures the uniform DEP force will be received in the whole channel space, ensuring a better trapping effect can be achieved. The numerical simulation was conducted in terms of electrode height, angle, and channel width. Based on the simulation results, an optimal chip structure was obtained. Then, the polystyrene particles with different diameters were used as the samples to verify the effectiveness of the designed trapping system. The findings of this research will contribute to the application of cell trapping and manipulation, as well as single-cell analysis.

Advances in precise single-cell capture for analysis and biological applications

Cells are the basic structural and functional units of living organisms. However, conventional cell analysis only averages millions of cell populations, and some important information is lost. It is essential to quantitatively characterize the physiology and pathology of single-cell activities. Precise single-cell capture is an extremely challenging task during cell sample preparation. In this review, we summarize the category of technologies to capture single cells precisely with a focus on the latest development in the last five years. Each technology has its own set of benefits and specific challenges, which provide opportunities for researchers in different fields. Accordingly, we introduce the applications of captured single cells in cancer diagnosis, analysis of metabolism and secretion, and disease treatment. Finally, some perspectives are provided on the current development trends, future research directions, and challenges of single-cell capture.

An electroactive microwell array device to realize simultaneous trapping of single cancer cells and clusters

The importance of circulating tumor cells (CTCs) as biomarkers has been greatly increased for early diagnosis and detection of cancer metastases. Along with a single form of CTCs, CTC clusters have recently attracted much attention due to their characteristics, such as suppression of apoptosis and survival from immune responses with high metastatic potential. Thus, it is highly necessary to investigate not only single cells but clustered cells at the same time to perform precise analysis of the current cancer state and develop suitable treatment. However, no cancer marker-free microfluidic devices have been realized to trap single cells and clusters at the same time in a single device yet. In this paper, we introduced a novel microfluidic device utilizing a microwell-on-electrode (MOE) array to realize simultaneous trapping of a single cell and clustered cells at a single cell/cluster level. Cell-sized microwells fabricated on interdigitated electrodes efficiently arrayed single cells with high trapping efficiency and single-cell occupancy (more than 90%) using dielectrophoresis (DEP). This high single cell trapping performance of MOE allows arraying of single clusters by trapping one of the cells that constitute a cluster. The feasibility of the MOE device for simultaneous arraying of single cancer cells and clusters was demonstrated by trapping a mixture of single cancer cells and clusters and measuring the size distribution of trapped clusters, which was almost identical with that of introduced cell population. Our work demonstrated that the developed MOE device can be one of the promising methods for trapping single cancer cells as well as clusters on a single device for cancer diagnosis and performing further analyses at a single cell/cluster level.

Recent Advances in Microscale Electroporation

Electroporation (EP) is a commonly used strategy to increase cell permeability for intracellular cargo delivery or irreversible cell membrane disruption using electric fields. In recent years, EP performance has been improved by shrinking electrodes and device structures to the microscale. Integration with microfluidics has led to the design of devices performing static EP, where cells are fixed in a defined region, or continuous EP, where cells constantly pass through the device. Each device type performs superior to conventional, macroscale EP devices while providing additional advantages in precision manipulation (static EP) and increased throughput (continuous EP). Microscale EP is gentle on cells and has enabled more sensitive assaying of cells with novel applications. In this Review, we present the physical principles of microscale EP devices and examine design trends in recent years. In addition, we discuss the use of reversible and irreversible EP in the development of therapeutics and analysis of intracellular contents, among other noteworthy applications. This Review aims to inform and encourage scientists and engineers to expand the use of efficient and versatile microscale EP technologies.

Rapid trapping and tagging of microparticles in controlled flow by in situ digital projection lithography

Real-time and fast trapping and tagging of microfeatures, such as microparticles and cells, are of great significance for biomedical research. In this work, we propose a novel in situ digital projection lithography technology that integrates real-time, in situ generation of digital masks for particle processing and fluid control into conventional DMD-based projection lithography. With the help of image recognition technology, we rapidly resolve the information of the microparticle profile or channel location, combining the selection of existing masks of different shapes, thus enabling in situ generation of user-customized micro-trap arrays and microfilter arrays for particle trapping and tagging. The success in trapping and filtering single particles, particle arrays, and cells has indicated the promising prospects of this novel technology for broad applications in microfluidics, single-cell analysis, and early-stage disease diagnostics.

Selective retrieval of antibody-secreting hybridomas in cell arrays based on the dielectrophoresis

A cascade of the formation of cell arrays, the discrimination of cells secreting specific molecules, and the selective retrieval of cells has been developed to harvest antibody-secreting hybridomas in heterogeneous cell populations simply and rapidly. The microwell array device consisted of three-dimensional microband electrodes by assembling both upper and lower substrates perpendicularly. Arrays of hybridomas secreting specific antibodies were prepared by aligning hybridomas in each microwell based on the attractive force of positive dielectrophoresis (p-DEP). Antibody secreted by the hybridomas in the microwells was recognized by the antigen immobilized on the microwells or the membrane surfaces of hybridomas to discriminate hybridomas with the secretion ability. Thereafter, a repulsive force of negative dielectrophoresis (n-DEP) was applied to release the target hybridomas from the microwell array. To harvest the target hybridoma, AC signals could be modulated in the n-DEP frequency region and applied to a pair of microband electrodes located above and below each microwell containing target hybridoma. Thus, the cell-based array system described in this study allowed selective retrieval of single target hybridomas by merely switching from p-DEP to n-DEP after selecting the antibody-secreting hybridomas trapped in each microwell. The development of this high-affinity device could be useful to recover hybridomas producing antibodies in large populations of cells rapidly and effectively.

Selective Single-Cell Sorting Using a Multisectorial Electroactive Nanowell Platform

Current approaches in targeted patient treatments often require the rapid isolation of specific rare target cells. Stream-based dielectrophoresis (DEP) based cell sorters have the limitation that the maximum number of sortable cell types is equivalent to the number of output channels, which makes upscaling to a higher number of different cell types technically challenging. Here, we present a microfluidic platform for selective single-cell sorting that bypasses this limitation. The platform consists of 10 000 nanoliter wells which are placed on top of interdigitated electrodes (IDEs) that facilitate dielectrophoresis-driven capture of cells. By use of a multisectorial design formed by 10 individually addressable IDE structures, our platform can capture a large number of different cell types. The sectorial approach allows for fast and straightforward modification to sort complex samples as different cell types are captured in different sectors and therefore removes the need for individual output channels per cell type. Experimental results obtained with a mixed sample of benign (MCF-10A) and malignant (MDA-MB-231) breast cells showed a target to nontarget sorting accuracy of over 95%. We envision that the high accuracy of our platform, in addition to its versatility and simplicity, will aid clinical environments where reliable sorting of varying complex samples is essential.

Highly Efficient Capture and Quantification of the Airborne Fungal Pathogen Sclerotinia sclerotiorum Employing a Nanoelectrode-Activated Microwell Array

In this study, we present a microdevice for the capture and quantification of Sclerotinia sclerotiorum spores, pathogenic agents of one of the most harmful infectious diseases of crops, Sclerotinia stem rot. The early prognosis of an outbreak is critical to avoid severe economic losses and can be achieved by the detection of a small number of airborne spores. However, the current lack of simple and effective methods to quantify fungal airborne pathogens has hindered the development of an accurate early warning system. We developed a device that remedies these limitations based on a microfluidic design that contains a nanothick aluminum electrode structure integrated with a picoliter well array for dielectrophoresis-driven capture of spores and on-chip quantitative detection employing impedimetric sensing. Based on experimental results, we demonstrated a highly efficient spore trapping rate of more than 90% with an effective impedimetric sensing method that allowed the spore quantification of each column in the array and achieved a sensitivity of 2%/spore at 5 kHz and 1.6%/spore at 20 kHz, enabling single spore detection. We envision that our device will contribute to the development of a low-cost microfluidic platform that could be integrated into an infectious plant disease forecasting tool for crop protection.

Microfluidic single-cell transcriptomics: moving towards multimodal and spatiotemporal omics

Cells are the basic units of life with vast heterogeneity. Single-cell transcriptomics unveils cell-to-cell gene expression variabilities, discovers novel cell types, and uncovers the critical roles of cellular heterogeneity in biological processes. The recent advances in microfluidic technologies have greatly accelerated the development of single-cell transcriptomics with regard to throughput, sensitivity, cost, and automation. In this article, we review state-of-the-art microfluidic single-cell transcriptomics, with a focus on the methodologies. We first summarize six typical microfluidic platforms for isolation and transcriptomic analysis of single cells. Then the on-going trend of microfluidic transcriptomics towards multimodal omics, which integrates transcriptomics with other omics to provide more comprehensive pictures of gene expression networks, is discussed. We also highlight single-cell spatial transcriptomics and single-cell temporal transcriptomics that provide unprecedented spatiotemporal resolution to reveal transcriptomic dynamics in space and time, respectively. The emerging applications of microfluidic single-cell transcriptomics are also discussed. Finally, we discuss the current challenges to be tackled and provide perspectives on the future development of microfluidic single-cell transcriptomics.

Selective Trapping and Retrieval of Single Cells Using Microwell Array Devices Combined with Dielectrophoresis

We proposed selective manipulation techniques for retrieving and retaining target cells arrayed in microwells based on dielectrophoresis (DEP). The upper substrate with microband electrodes was mounted on the lower substrate with microwells based on the same design of microband electrodes by 90 degree relative to the lower substrate. A repulsive force of negative dielectrophoresis (n-DEP) was employed to retrieve the target cells from the microwell array selectively. Furthermore, the target cells were retained in the microwells after other cells were removed by n-DEP. Thus, the system described in this study could make it possible to retrieve and recover single target cells from a microwell array after determining the function of cells trapped in each microwell.

A microfluidic single-cell array for in situ laminar-flow-based comparative culturing of budding yeast cells

To facilitate in situ comparative culturing of budding yeast cells in a precisely controlled microenvironment, we developed a microfluidic single-cell array (MiSCA) with 96 traps (16 rows × 6 columns) for single-cell immobilization. Through optimization of the distances between neighboring traps and the applied flow rates by using a hydraulic equivalent circuit of the fluidic network, yeast cells were delivered to each column of the array by laminar focused flows and reliably captured at the traps by hydrodynamic forces with about 90% efficiency of cell immobilization. Immobilized cells in different columns within the same device can then be cultured in parallel while being exposed to different media and compounds delivered by laminar flows. For biological validation of the comparative cell-culturing device, we used budding yeast that can express yellow fluorescent protein upon the addition of β-estradiol in cell-culturing medium. Experimental results show successful induction of fluorescence in cells immobilized in desired columns that have been dosed with β-estradiol. The MiSCA system allows for performing sets of experiments and control experiments in parallel in the same device, or for executing comparative experiments under well-defined laminar-perfusion conditions with different media, as well as in situ monitoring of dynamic cellular responses upon different analytical compounds or reagents for single-cell analysis.

Recent Progress in Wearable Biosensors: From Healthcare Monitoring to Sports Analytics

Recent advances in lab-on-a-chip technology establish solid foundations for wearable biosensors. These newly emerging wearable biosensors are capable of non-invasive, continuous monitoring by miniaturization of electronics and integration with microfluidics. The advent of flexible electronics, biochemical sensors, soft microfluidics, and pain-free microneedles have created new generations of wearable biosensors that explore brand-new avenues to interface with the human epidermis for monitoring physiological status. However, these devices are relatively underexplored for sports monitoring and analytics, which may be largely facilitated by the recent emergence of wearable biosensors characterized by real-time, non-invasive, and non-irritating sensing capacities. Here, we present a systematic review of wearable biosensing technologies with a focus on materials and fabrication strategies, sampling modalities, sensing modalities, as well as key analytes and wearable biosensing platforms for healthcare and sports monitoring with an emphasis on sweat and interstitial fluid biosensing. This review concludes with a summary of unresolved challenges and opportunities for future researchers interested in these technologies. With an in-depth understanding of the state-of-the-art wearable biosensing technologies, wearable biosensors for sports analytics would have a significant impact on the rapidly growing field-microfluidics for biosensing.

An Integrated Dielectrophoresis-Trapping and Nanowell Transfer Approach to Enable Double-Sub-Poisson Single-Cell RNA Sequencing

Current technologies for high-throughput single-cell RNA sequencing (scRNA-seq) are based upon stochastic pairing of cells and barcoded beads in nanoliter droplets or wells. They are limited by the mathematical principle of the Poisson statistics such that the utilization of either cells or beads or both is no more than ∼33%. Despite the versatile design of microfluidics or microwells for high-yield loading of beads that beats the Poisson limit, subsequent encapsulation of single cells is still determined by stochastic pairing, representing a fundamental limitation in the field of single-cell sequencing. Here, we present dTNT-seq, an integrated dielectrophoresis (DEP)-trapping-nanowell-transfer (dTNT) approach to perform cell trapping and bead loading both in a sub-Poisson manner to facilitate scRNA-seq. A larger-sized 50 μm microwell array was prealigned precisely on top of the 20 μm DEP nanowell array such that single cells trapped by DEP can be readily transferred into the underneath larger wells by flipping the device, followed by subsequent hydrodynamic bead loading and coisolation with transferred single cells. Using a dTNT device composed of 3600 electroactive DEP-nanowell units, we demonstrated a single-cell trapping rate of 91.84%, a transfer efficiency of 82%, and a routine bead loading rate of >99%, which breaks the Poisson limit for the capture of both cells and beads, thus called double-sub-Poisson distribution, prior to encapsulating them in nanoliter wells for cellular mRNA barcoding. This approach was applied to human (HEK) and mouse (3T3) cells. Comparison with a non-DEP-based method through gene expression clustering and regulatory pathway analysis demonstrates consistent patterns and negligible alternation of cellular transcriptional states by DEP. We envision the dTNT-seq device can be modified for studying cell-cell interactions and enable other applications requiring active manipulation of single cells prior to transcriptome sequencing.

Detection of Rare Objects by Flow Cytometry: Imaging, Cell Sorting, and Deep Learning Approaches

Flow cytometry nowadays is among the main working instruments in modern biology paving the way for clinics to provide early, quick, and reliable diagnostics of many blood-related diseases. The major problem for clinical applications is the detection of rare pathogenic objects in patient blood. These objects can be circulating tumor cells, very rare during the early stages of cancer development, various microorganisms and parasites in the blood during acute blood infections. All of these rare diagnostic objects can be detected and identified very rapidly to save a patient's life. This review outlines the main techniques of visualization of rare objects in the blood flow, methods for extraction of such objects from the blood flow for further investigations and new approaches to identify the objects automatically with the modern deep learning methods.

Airplug-mediated isolation and centralization of single T cells in rectangular microwells for biosensing

Sorting cells in a single cell per microwell format is of great interest to basic biology studies, biotherapeutics, and biosensing including cell phenotyping. For instance, isolation of individual immune T cells in rectangular microwells has been shown to empower the multiplex cytokine profiling at the single cell level for therapeutics applications. The present study, however, shows that there is an existing bias in temporal cytokine sensing that originates from random "unpredicted" positions of loaded cells within the rectangular microwells. To eliminate this bias, the isolated cells need to be well-aligned with each other and relative to the sensing elements. Hence, an approach that utilizes the in situ formation and release of airplugs to localize cells towards the center of the rectangular microwells is reported. The chip includes 2250 microwells (each 500 × 50 × 20 μm3) arranged in 9 rows. Results showed 20% efficiency in trapping single T cells per microwells, where cells are localized within ±3% of the center of microwells. The developed platform could provide real-time dynamic and unbiased multiplex cytokine detection from single T cells for phenotyping and biotherapeutics studies.

Sequential Cell-Processing System by Integrating Hydrodynamic Purification and Dielectrophoretic Trapping for Analyses of Suspended Cancer Cells

Microfluidic devices employing dielectrophoresis (DEP) have been widely studied and applied in the manipulation and analysis of single cells. However, several pre-processing steps, such as the preparation of purified target samples and buffer exchanges, are necessary to utilize DEP forces for suspended cell samples. In this paper, a sequential cell-processing device, which is composed of pre-processing modules that employ deterministic lateral displacement (DLD) and a single-cell trapping device employing an electroactive microwell array (EMA), is proposed to perform the medium exchange followed by arraying single cells sequentially using DEP. Two original microfluidic devices were efficiently integrated by using the interconnecting substrate containing rubber gaskets that tightly connect the inlet and outlet of each device. Prostate cancer cells (PC3) suspended in phosphate-buffered saline buffer mixed with microbeads were separated and then resuspended into the DEP buffer in the integrated system. Thereafter, purified PC3 cells were trapped in a microwell array by using the positive DEP force. The achieved separation and trapping efficiencies exceeded 94% and 93%, respectively, when using the integrated processing system. This study demonstrates an integrated microfluidic device by processing suspended cell samples, without the requirement of complex preparation steps.

Fluorescence quantification of intracellular materials at the single-cell level by an integrated dual-well array microfluidic device

We present an integrated microfluidic device for quantifying intracellular materials at the single-cell level. This device combines a dual-well structure and a microfluidic control system. The dual-well structure includes capture wells (20 μm in diameter) for trapping a single cell and reaction wells (200 μm in diameter) for confining reagents. The control system enables a programmable procedure for single-cell analysis. This device achieves highly efficient trapping of single cells, overcoming the Poisson distribution, while affording sufficient biochemical reagents for each isolated reactor. We successfully utilized the presented device to monitor the catalytic interaction between intracellular alkaline phosphatase enzyme and a fluorogenic substrate and to quantify the intracellular glucose concentration of a single K562 cell based on an external standard method. The results demonstrate the feasibility and convenience of our dual-well array microfluidic device as a practical single-cell research tool.

On-chip immunofluorescence analysis of single cervical cells using an electroactive microwell array with barrier for cervical screening

Several specific tests for cervical screening have been developed recently, including p16/Ki67 dual immunostaining for diagnosing high-risk human papillomavirus positive squamous intraepithelial lesion in the cervix. However, manual screening of cells in an entire glass slide is currently a standard clinical procedure for quantification and interpretation of immunocytochemical features of the cells. Here, we developed a microfluidic device containing an electroactive microwell array with barriers (EMAB) for highly efficient single-cell trapping followed by on-chip immunofluorescence analysis with minimum loss of the sample. EMAB utilizes patterned electrodes at the bottom of cell-sized microwells to trap single cells using dielectrophoresis (DEP) and cell-holding structures behind the microwells to stabilize the position of trapped cells even without DEP. Using the device, we evaluated the performance of p16/Ki67 dual immunostaining of HeLa cells on the chip. The device shows 98% cell-trapping efficiency as well as 92% cell-holding efficiency against the fixed HeLa cells, and we successfully demonstrated high-efficiency on-chip immunofluorescence analysis with minimal loss of sample. p16/Ki67 dual immunostaining using EMAB may be useful for complementary tests for cervical screening in confirming the histopathological diagnosis.

Rapid Formation of Aggregates with Uniform Numbers of Cells Based on Three-dimensional Dielectrophoresis

We applied a fabrication method for the formation of island organization of cells based on a three-dimensional (3D) device for negative dielectrophoresis (n-DEP) to produce cell aggregates with uniform numbers of cells rapidly and simply. The intersections formed by rotating the interdigitated array (IDA) with two combs of band electrodes on the upper substrate by 90° relative to the IDA with two combs on the lower substrate were prepared in the device. The AC voltage was applied to a comb on the upper substrate and a comb on the lower substrate, while AC voltage with opposite phase was applied to another comb on the upper substrate and another comb on the lower substrate. Cells dispersed randomly were directed toward the intersections with relatively lower electric fields due to n-DEP, which formed by AC voltage applied bands with the identical phase, resulting in the formation of island patterns of cells. The cells accumulated at intersections were promoted to form the cell aggregates due to the close contact together. The production of cell aggregations adhered together was easily found by the dispersion behavior after switching the applied frequency to convert the cellular pattern. When cells were accumulated at the intersections by n-DEP for 45 min, almost accumulations of cells were adhered together, and hence a formations of cell aggregations. By using the present method, we can rapidly and simply fabricate cell aggregations with a uniform number of cells.

High-density micro-well array with aptamer-silver conjugates for cell sorting and imaging at single cells

Characterizing cell behavior is important to modern medical diagnoses as the changes of cell behavior are often indicators of huge diseases. In order to gain enough information about cells, developing novel methods of cell sorting and imaging is an important task. With development of micro-fabrication technologies, more advanced miniaturized devices are applied to cell research. Here, a portable and easy-to-use chip with high-density periodic micro-well array is designed and fabricated to capture target cells specifically. Combining with aptamer-silver conjugates and FAM functioned report probes, the sandwich assay was successfully applied for imaging cells. Any well of the chip is carefully designed to provide abundant information on single cells. Since there are 19,200 microwells in a single chip, more information is available. Compared to other cells, such as HEK-293, MCF-7, U₂OS and Ramos cells, the sandwich assay shows high specificity towards target cell CCRF-CEM. What's more, the applications of the chip can be further expanded to other cells imaging if suitable aptamers were selected. This high-density micro-well array of aptamer-silver conjugates is hopeful to play an important role in medical diagnosis in the future.

Integration of marker-free selection of single cells at a wireless electrode array with parallel fluidic isolation and electrical lysis

We present integration of selective single-cell capture at an array of wireless electrodes (bipolar electrodes, BPEs) with transfer into chambers, reagent exchange, fluidic isolation and rapid electrical lysis in a single platform, thus minimizing sample loss and manual intervention steps. The whole process is achieved simply by exchanging the solution in a single inlet reservoir and by adjusting the applied voltage at a pair of driving electrodes, thus making this approach particularly well-suited for a broad range of research and clinical applications. Further, the use of BPEs allows the array to be scalable to increase throughput. Specific innovations reported here include the incorporation of a leak channel to balance competing flow paths, the use of 'split BPEs' to create a distinct recapture and electrical lysis point within the reaction chamber, and the dual purposing of an ionic liquid as an immiscible phase to seal the chambers and as a conductive medium to permit electrical lysis at the split BPEs.

Microfluidic technologies in cell isolation and analysis for biomedical applications

Efficient platforms for cell isolation and analysis play an important role in applied and fundamental biomedical studies. As cells commonly have a size of around 10 microns, conventional handling approaches at a large scale are still challenged in precise control and efficient recognition of cells for further performance of isolation and analysis. Microfluidic technologies have become more prominent in highly efficient cell isolation for circulating tumor cells (CTCs) detection, single-cell analysis and stem cell separation, since microfabricated devices allow for the spatial and temporal control of complex biochemistries and geometries by matching cell morphology and hydrodynamic traps in a fluidic network, as well as enabling specific recognition with functional biomolecules in the microchannels. In addition, the fabrication of nano-interfaces in the microchannels has been increasingly emerging as a very powerful strategy for enhancing the capability of cell capture by improving cell-interface interactions. In this review, we focus on highlighting recent advances in microfluidic technologies for cell isolation and analysis. We also describe the general biomedical applications of microfluidic cell isolation and analysis, and finally make a prospective for future studies.

A Self-Digitization Dielectrophoretic (SD-DEP) Chip for High-Efficiency Single-Cell Capture, On-Demand Compartmentalization, and Downstream Nucleic Acid Analysis

The design and fabrication of a self-digitization dielectrophoretic (SD-DEP) chip with simple components for single-cell manipulation and downstream nucleic acid analysis is presented. The device employed the traditional DEP and insulator DEP to create the local electric field that is tailored to approximately the size of single cells, enabling highly efficient single-cell capture. The multistep procedures of cell manipulation, compartmentalization, lysis, and analysis were performed in the integrated microdevice, consuming minimal reagents, minimizing contamination, decreasing lysate dilution, and increasing assay sensitivity. The platform developed here could be a promising and powerful tool in single-cell research for precise medicine.

Mask-free fabrication of a versatile microwell chip for multidimensional cellular analysis and drug screening

Cells are frequently studied because they are basic structural, functional, and biological units of living organisms. Extracting features from cellular behaviors can facilitate decision making in medical diagnoses and represents an important aspect in the development of biomedical engineering. Previous studies have just focused on either the individual cell or cell clusters separately, which leads to a great lack of information. Microwell technologies could address the challenges of in vitro cellular studies, from individual cell studies to 3D functional assays, by providing more information from smaller sample volumes and enabling the incorporation of low-cost high-throughput assays in the drug discovery process. To this end, the present study describes an easy-to-use method for fabricating a versatile microwell chip that utilizes a digital micro-mirror device printing system, and the chip can be employed in multidimensional cellular analysis, ranging from the single cell to the 3D spheroid level. The microwell manufacturing process, using a digital mask in place of a conventional physical mask, is based on shadowed light and is full of flexibility. Three different dimensions (single cell (1D), cell monolayer (2D) and cell spheroid (3D)) of one cell type can be formed using a microwell array and the analyses of biological characteristics are achieved separately. Single cells and cell clusters can be controlled via customized geometries of microfabricated selectively adhesive poly(ethylene glycol) diacrylate (PEGDA) wells. The effects of shape on cellular growth and hybrid tissue layers were investigated by peeling off the microwells. Furthermore, 3D multicellular spheroids were successfully established in a controllable and high-throughput format. Preclinical drug screening was investigated and distinct differences were observed in the tolerance response to drug testing between the 2D and 3D conditions. The study results further demonstrate that the high-density microwell chip is an easy-to-use multidimensional cellular analysis and rapid drug screening technique, and it could be easily adapted for a wide range of biological research applications.

A planar dielectrophoresis-based chip for high-throughput cell pairing

This paper reports the design and fabrication of a planar chip for high-throughput cell trapping and pairing (more than 2400 single cell-cell pairs in a microwell array) in a 1 × 1.5 cm area by positive dielectrophoresis (p-DEP) within only several minutes. The p-DEP was generated by applying an alternating current signal on a novel two-pair interdigitated array (TPIDA) electrode. The TPIDA electrode not only enabled the planar chip to be incorporated with a most often used PDMS microfluidic channel, but also contributed to a high single cell-cell pairing efficiency up to 74.2% by decreasing the induced electric field during consecutive p-DEP trapping of two cell types. Furthermore, the paired cells in each microwell could be "pushed" together into a microbaffle by a liquid flow through a capillary-sized channel, resulting in single cell-cell contact. More importantly, the planar chip could be used repeatedly by a simple water cleaning process. The planar chip offers an effective way for high-throughput single cell-cell pairing, which could provide a facile platform for cell communication and a precise cell pairing step in cell fusion.

An open-pattern droplet-in-oil planar array for single cell analysis based on sequential inkjet printing technology

Cellular heterogeneity represents a fundamental principle of cell biology for which a readily available single-cell research tool is urgently required. Here, we present a novel method combining cell-sized well arrays with sequential inkjet printing. Briefly, K562 cells with phosphate buffer saline buffer were captured at high efficiency (74.5%) in a cell-sized well as a "primary droplet" and sealed using fluorinated oil. Then, piezoelectric inkjet printing technology was adapted to precisely inject the cell lysis buffer and the fluorogenic substrate, fluorescein-di-β-D-galactopyranoside, as a "secondary droplet" to penetrate the sealing oil and fuse with the "primary droplet." We thereby successfully measured the intracellular β-galactosidase activity of K562 cells at the single-cell level. Our method allows, for the first time, the ability to simultaneously accommodate the high occupancy rate of single cells and sequential addition of reagents while retaining an open structure. We believe that the feasibility and flexibility of our method will enhance its use as a universal single-cell research tool as well as accelerate the adoption of inkjet printing in the study of cellular heterogeneity.

High-Throughput Selective Capture of Single Circulating Tumor Cells by Dielectrophoresis at a Wireless Electrode Array

We demonstrate continuous high-throughput selective capture of circulating tumor cells by dielectrophoresis at arrays of wireless electrodes (bipolar electrodes, BPEs). The use of BPEs removes the requirement of ohmic contact to individual array elements, thus enabling otherwise unattainable device formats. Capacitive charging of the electrical double layer at opposing ends of each BPE allows an AC electric field to be transmitted across the entire device. Here, two such designs are described and evaluated. In the first design, BPEs interconnect parallel microchannels. Pockets extruding from either side of the microchannels volumetrically control the number of cells captured at each BPE tip and enhance trapping. High-fidelity single-cell capture was achieved when the pocket dimensions were matched to those of the cells. A second, open design allows many non-targeted cells to pass through. These devices enable high-throughput capture of rare cells and single-cell analysis.

Label-free single-cell separation and imaging of cancer cells using an integrated microfluidic system

The incidence of cancer is increasing worldwide and metastatic disease, through the spread of circulating tumor cells (CTCs), is responsible for the majority of the cancer deaths. Accurate monitoring of CTC levels in blood provides clinical information supporting therapeutic decision making, and improved methods for CTC enumeration are asked for. Microfluidics has been extensively used for this purpose but most methods require several post-separation processing steps including concentration of the sample before analysis. This induces a high risk of sample loss of the collected rare cells. Here, an integrated system is presented that efficiently eliminates this risk by integrating label-free separation with single cell arraying of the target cell population, enabling direct on-chip tumor cell identification and enumeration. Prostate cancer cells (DU145) spiked into a sample with whole blood concentration of the peripheral blood mononuclear cell (PBMC) fraction were efficiently separated and trapped at a recovery of 76.2 ± 5.9% of the cancer cells and a minute contamination of 0.12 ± 0.04% PBMCs while simultaneously enabling a 20x volumetric concentration. This constitutes a first step towards a fully integrated system for rapid label-free separation and on-chip phenotypic characterization of circulating tumor cells from peripheral venous blood in clinical practice.