Harnessing the Potential of Graphene Quantum Dots for Multifunctional Biomedical Applications

The existing and emerging demand for materials for life and health has contributed to the cultivation and development of respective markets. Nevertheless, the current generation of biomedical materials has yet to fully satisfy the clinical requirements of the market, which is still in its relative infancy. Research and development in this area must be prioritized in light of the pivotal role of new life and health materials in the biological field. Among many life and health materials, GQDs, an emerging nanomaterial, exhibit considerable promise in the biomedical field, primarily due to their exceptional properties. Furthermore, the direct preparation and functionalization of GQDs have facilitated the development of specific functional composites based on GQDs. The biological applications of GQDs are undergoing rapid growth, which makes it necessary to publish a review article presenting the latest advances in this field. This review provides an overview of the significant advances in synthesizing GQDs, the techniques employed for structural characterizations, and the properties that have been elucidated. Furthermore, it presents recent findings on applying GQDs in antimicrobial, anticancer, biosensing, drug delivery, and bioimaging applications. Finally, it explores the potential of GQDs in biomedicine and biotechnology, highlighting the current challenges that remain to be addressed.

In Vivo and In Vitro Biodistribution of Inulin-Tethered Boron-Doped Amine-Functionalized Carbon Dots

Carbon dots (CDs) are considered a potential substance for use in biomarker applications due to their exceptional light stability. However, there are several unsolved uncertainties about CD toxicity in vitro and in vivo. In this study, a redesigned derivative of the natural polysaccharide inulin is connected with boron-doped amine-functionalized carbon dots (In@BN-CDs) through carbodiimide coupling to improve the biocompatibility of the nanoformulation. The toxicity and biodistribution of ln@BN-CDs in vivo and in vitro were explored in detail. The In@BN-CDs were tested after a single inhalation dosage of 10, 7, 5, 3, and 1 mg/kg. We explored a dose- and time-dependent technique of collecting blood samples and then centrifuged the blood samples and obtained serum samples, which were then analyzed for fluorescence inspection; findings showed that the fluorescence intensity decreased with time. Similarly, In@BN-CDs were effectively used as in vitro toxicity and fluorescent probes for cellular imaging in living cells due to their biocompatibility and cell membrane accessibility. The biocompatibility and efficacy of In@BN-CDs as fluorescent imaging agents have been demonstrated. The data suggest that the usage of In@BN-CDs in vitro and in vivo should be examined.

The Transformation of 0-D Carbon Dots into 1-, 2- and 3-D Carbon Allotropes: A Minireview

Carbon dots (CDs) represent a relatively new type of carbon allotrope with a 0-D structure and with nanoparticle sizes < 10 nm. A large number of research articles have been published on the synthesis, characteristics, mechanisms and applications of this carbon allotrope. Many of these articles have also shown that CDs can be synthesized from “bottom-up” and “top-down” methods. The “top-down” methods are dominated by the breaking down of large carbon structures such as fullerene, graphene, carbon black and carbon nanotubes into the CDs. What is less known is that CDs also have the potential to be used as carbon substrates for the synthesis of larger carbon structures such as 1-D carbon nanotubes, 2-D or 3-D graphene-based nanosheets and 3-D porous carbon frameworks. Herein, we present a review of the synthesis strategies used to convert the 0-D carbons into these higher-dimensional carbons. The methods involve the use of catalysts or thermal procedures to generate the larger structures. The surface functional groups on the CDs, typically containing nitrogen and oxygen, appear to be important in the process of creating the larger carbon structures that typically are formed via the generation of covalent bonds. The CD building blocks can also ‘aggregate’ to form so called supra-CDs. The mechanism for the formation of the structures made from CDs, the physical properties of the CDs and their applications (for example in energy devices and as reagents for use in medicinal fields) will also be discussed. We hope that this review will serve to provide valuable insights into this area of CD research and a novel viewpoint on the exploration of CDs.

Graphene quantum dots: A review on the effect of synthesis parameters and theranostic applications

The rising demand for early-stage diagnosis of diseases such as cancer, diabetes, neurodegenerative can be met with the development of materials offering high sensitivity and specificity. Graphene quantum dots (GQDs) have been investigated extensively for theranostic applications owing to their superior photostability and high aqueous dispersibility. These are attractive for a range of biomedical applications as their physicochemical and optoelectronic properties can be tuned precisely. However, many aspects of these properties remain to be explored. In the present review, we have discussed the effect of synthetic parameters upon their physicochemical characteristics relevant to bioimaging. We have highlighted the effect of particle properties upon sensing of biological molecules through 'turn-on' and 'turn-off' fluorescence and generation of electrochemical signals. After describing the effect of surface chemistry and solution pH on optical properties, an inclusive view on application of GQDs in drug delivery and radiation therapy has been given. Finally, a brief overview on their application in gene therapy has also been included.

Systematic study of physicochemical and electrochemical properties of carbon nanomaterials

Carbon nanomaterials exhibit exceptional properties and broad horizon applications, where graphene is one of the most popular allotropes of this family due to its astounding performance in every stratum vis-à-vis other classical materials. The large surface area of 2630 m² g⁻¹, high electrical conductivity, and electron mobility of non-toxic graphene nanomaterials serve as the building blocks for supercapacitor studies. In this article, comparative studies are carried out between electrochemically exfoliated graphene sheets (GSs), solvothermally synthesized graphene quantum dots (GQDs) and acid refluxed carbon nanotubes (CNTs) as an energy storage electrode nanomaterial through cyclic voltammetry (CV). The electrochemical properties of the materials are well correlated with the physicochemical characteristics obtained from Raman, Fourier-transform infrared, and absorption spectroscopy. Thin GSs (0.8–1 nm) and small size (6–10 nm) GQDs fabricated by using laboratory-grade 99% purity graphite rods resulted in promising low-cost materials at mass scale as compared to conducting CNTs. The 0D graphene quantum dots proved to be an excellent energy electrode material in an alkaline electrolyte solution compared to other carbon nanomaterials. The distinct characteristic features of GQDs, like superior electrical properties, large surface area, and abundant active sites make them an ideal candidate for utilization in supercapacitors. The GQDs exhibited an enhanced specific capacitance of 113 F g⁻¹ in 6 mol L⁻¹ KOH through cyclic voltammetry.

Carbon nanomaterials exhibit exceptional properties and broad horizon applications, where graphene is one of the most popular allotropes of this family due to its astounding performance in every stratum vis-à-vis other classical materials.

Synthesis, Applications, and Prospects of Graphene Quantum Dots: A Comprehensive Review

Graphene quantum dot (GQD) is one of the youngest superstars of the carbon family. Since its emergence in 2008, GQD has attracted a great deal of attention due to its unique optoelectrical properties. Non-zero bandgap, the ability to accommodate functional groups and dopants, excellent dispersibility, highly tunable properties, and biocompatibility are among the most important characteristics of GQDs. To date, GQDs have displayed significant momentum in numerous fields such as energy devices, catalysis, sensing, photodynamic and photothermal therapy, drug delivery, and bioimaging. As this field is rapidly evolving, there is a strong need to identify the emerging challenges of GQDs in recent advances, mainly because some novel applications and numerous innovations on the ease of synthesis of GQDs are not systematically reviewed in earlier studies. This feature article provides a comparative and balanced discussion of recent advances in synthesis, properties, and applications of GQDs. Besides, current challenges and future prospects of these emerging carbon-based nanomaterials are also highlighted. The outlook provided in this review points out that the future of GQD research is boundless, particularly if upcoming studies focus on the ease of purification and eco-friendly synthesis along with improving the photoluminescence quantum yield and production yield of GQDs.

Tuning optical properties of nitrogen-doped carbon dots through fluorescence resonance energy transfer using Rhodamine B for the ratiometric sensing of mercury ions

Carbon dots (CDs) that exhibit fluorescence properties are generally derived from carbonaceous materials, and possess ultrasmall sizes with various exciting physical, chemical and photo-properties, which have been used in many different fields in recent time. Here, we have focused on the preparation of nitrogen-doped CDs (N-CDs) that emit a bright blue fluorescence upon exposure to UV excitation. Furthermore, by employing Rhodamine B (RhB) as a donor molecule, the emission color of N-CDs is altered from blue to red. Interestingly, the optical tuning based upon emission from one particular color to various other colors has been achieved by varying the doping ratio of the donor molecule, RhB. The reason is mainly attributed to the non-radiative energy transfer of the exciton energy from an excited donor to an acceptor through fluorescence resonance energy transfer (FRET). Furthermore, this emission behavior is explored for the ratiometric sensing of mercury ion (Hg2+) in aqueous medium. Among different color emissions, we chose one particular emission color, namely violet, for the detection of the Hg2+ ion. The photoluminescence properties of N-CDs are effectively and systematically quenched with the addition of different mercury ion concentrations, leading to efficient energy transformation arising from the synergetic effect of the electrostatic interaction and metal - ligand coordination between the surface functional groups of N-CDs and Hg2+ ion. On the other hand, RhB has no interaction with Hg2+ ions. These findings provide a way for developing a cheap, selective and suitable sensing matrix for the detection of toxic metal ions, such as mercury (Hg2+) at a low concentration level.

Preparation of magnetized iron oxide grafted on graphene oxide for hyperthermia application

Magnetic hyperthermia therapy (MHT) is a highly promising therapeutic modality for the treatment of different kinds of cancers and malignant tumors. The therapy is based on the concept that; iron oxide nanoparticles deposited at cancer sites can generate heat when exposed to an alternating current magnetic field or near infrared radiation and consequently destroying only the cancer cells by exploiting their vulnerability to heat. The fact that the treatment is at molecular level and that iron oxide nanoparticles provide more guided focus heating justifies its efficacy over treatment such as surgery, radiation therapy and chemotherapy. Nevertheless, the spread of MHT as the next-generation therapeutics has been shadowed by insufficient heating especially at the in vivo stage. This can be averted by modifying the iron oxide nanoparticle structure. To this end, various attempts have been made by developing a magnetic hybrid nanostructure capable of generating efficient heat. However, the synthesis method for each component (of the magnetic hybrid nanostructure) and the grafting process is now an issue. This has a direct effect on the performance of the magnetic hybrid nanostructure in MHT and other applications. The main objective of this review is to detail out the different materials, methods and characterization techniques that have been used so far in developing magnetic hybrid nanostructure. In view of this, we conducted a comprehensive review and present a road map for developing a magnetic hybrid nanostructure that is capable of generating optimum heat during MHT. We further summarize the various characterization techniques and necessary parameters to study in validating the efficiency of the magnetic hybrid nanostructure. Hopefully, this contribution will serve as a guide to researchers that are willing to evaluate the properties of their magnetic hybrid nanostructure.

Lichen-like anchoring of MoSe2 on functionalized multiwalled carbon nanotubes: an efficient electrode for asymmetric supercapacitors

In the present study, we have developed a composite electrode of MSNT using a simple and scalable two-step scheme to synthesize a composite electrode material comprising MoSe₂/multiwalled carbon nanotubes (MoSe₂/MWCNTs) for supercapacitor applications. First, a MWCNT thin film was deposited on a stainless steel substrate by using a “dip and dry” coating technique. Subsequently, MoSe₂ was deposited onto the MWCNT thin film using the successive ionic layer adsorption and reaction method. The lichen-like growth of MoSe₂ on the MWCNT network provided dual charge storage and an effective ion transfer path. The composite electrode of MSNT has been studied systematically with different electrolytes and concentrations of electrolyte. As a result, the MoSe₂/MWCNT (MSNT) electrode exhibited excellent electrochemical properties such as a specific capacity of 192 mA h g⁻¹ and a capacitance retention of 88% after 2000 cycles in 1 M LiCl electrolyte. The results demonstrated the huge potential of the MSNT composite electrode for practical application in supercapacitors. The aqueous symmetric cell fabricated using the MSNT composite as both the anode and cathode showed an energy density of 17.9 W h kg⁻¹. Additionally, the energy density improved by designing an asymmetric device of MSNT//MnO₂ and notably, it reveals two-fold improvement in the energy density compared to a symmetric MSNT cell. The MSNT//MnO₂-based asymmetric cell exhibited a maximum specific capacitance of 112 F g⁻¹ with a high energy density of 35.6 W h kg⁻¹.

Simple and scalable chemical synthesis approach to develop a MoSe₂/MWCNTs composite thin film electrode for a highly efficient asymmetric supercapacitor cell.

Avenue to Large-Scale Production of Graphene Quantum Dots from High-Purity Graphene Sheets Using Laboratory-Grade Graphite Electrodes

Graphene has unprecedented physical, chemical, and electronic properties, but need of the hour is to develop low-dimensional nanomaterials, such as graphene quantum dots (GQDs), that could be incorporated into nanoscale devices. This article depicts the production of GQDs from ultrafine, thin (0.8-1 nm), bilayer graphene sheets (GSs) possessing large micron-sized lateral dimension, low defect density (I D/I G: 0.1), and oxidation degree (C/O ratio: 27) of lowest level, in contrast to many other techniques where synthesis of GSs was done using analytical-grade expensive graphite electrodes. This low-cost manufacturing of GSs for industrial-scale applications was achieved by utilizing only 99%-purity graphite electrodes. The variants of such graphite electrodes (graphite rod, film, pencil) are etched in different pH electrolytes (H2SO4, NaCl, NaOH) via prompt electrochemical exfoliation, each giving more than 50% yield. Nowadays, semiconductor quantum dots (QDs) are utilized in smart device production industries, but their toxicity is a major issue of concern. Therefore, the dimension of this two-dimensional (2D) material is reduced to <10 nm to generate GQDs. A facile and highly reproducible approach has been reported for the large-scale generation of GQDs (size ca. 6-10 nm) with minimal surface defects. The protocol followed in this article to synthesize GQDs involves the use of ethylenediamine (en), which passivates the surface and reduces defects, thereby enhancing the optical properties. We demonstrate the correlation of the electrochemical and hydrothermal parameters with the growth mechanism and morphological, structural, chemical, and optical properties of the graphene nanomaterials. Raman spectroscopy and X-ray diffraction (XRD) reveal the structural configurations of GSs and GQDs to investigate the nature of defects. Field emission scanning electron microscopy (FESEM) confirms the morphological characteristics of the as-prepared GSs and GQDs with energy-dispersive X-ray (EDX) analysis determining the C/O ratio. The optical properties like UV-visible absorption and fluorescence assays show the quantum confinement effect phenomenon in GQDs. The obtained GSs and GQDs display enhanced solution stability in DI water and other solvents due to controllable oxidation degree as elucidated through Fourier transform infrared (FTIR) analysis.

Electrochemistry in Carbon-based Quantum Dots

Electrochemistry belongs to an important branch of chemistry that deals with the chemical changes produced by electricity and the production of electricity by chemical changes. Therefore, it can not only act a powerful tool for materials synthesis, but also offer an effective platform for sensing and catalysis. As extraordinary zero-dimensional materials, carbon-based quantum dots (CQDs) have been attracting tremendous attention due to their excellent properties such as good chemical stability, environmental friendliness, nontoxicity and abundant resources. Compared with the traditional methods for the preparation of CQDs, electrochemical (EC) methods offer advantages of simple instrumentation, mild reaction conditions, low cost and mass production. In return, CQDs could provide cost-effective, environmentally friendly, biocompatible, stable and easily-functionalizable probes, modifiers and catalysts for EC sensing. However, no specific review has been presented to systematically summarize both aspects until now. In this review, the EC preparation methods of CQDs are critically discussed focusing on CQDs. We further emphasize the applications of CQDs in EC sensors, electrocatalysis, biofuel cells and EC flexible devices. This review will further the experimental and theoretical understanding of the challenges and future prospective in this field, open new directions on exploring new advanced CQDs in EC to meet the high demands in diverse applications.

Paper Based Photoluminescent Sensing Platform with Recognition Sites for Tributyltin

In this study, a novel photoluminescence material for the detection of tributyltin (TBT) was developed by using a paper-based nanocomposite system. For this purpose, molecularly imprinted polymeric nanoparticles (MIN) were synthesized with mini-emulsion polymerization technique. Graphene quantum dots obtained by the hydrothermal pyrolysis were immobilized to the nanoparticle surface via EDC-NHS coupling. The fabrication of sensing platform for TBT can be divided into two steps that are the preparation of nanocomposite and the applying the nanocomposite onto nitrocellulose membrane. The selectivity constant and association kinetics were calculated to analyze the interaction of TBT with immobilized MINs. The results proved that the developed nanosensor is promising for the determination of TBT with high selectivity and sensitivity reaching a detection limit of 0.23 ppt in seawater. This novel photoluminescent nanosensor has the potential to pave the way for further studies and applications.

Tungsten Nitride Nanodots Embedded Phosphorous Modified Carbon Fabric as Flexible and Robust Electrode for Asymmetric Pseudocapacitor

Owing to the excellent physical properties of metal nitrides such as metallic conductivity and pseudocapacitance, they have recently attracted much attention as competitive materials for high-performance supercapacitors (SCs). However, the voltage window for metal nitride-based symmetric SCs is limited (0.6-0.8 V) in aqueous electrolyte due to the oxidation at high negative potentials. In this respect, ultra-small tungsten nitride particles onto the phosphorous modified carbon fabric (W₂ N@P-CF) are engineered as a promising hybrid electrode for pseudocapacitors. Additionally, the fact that the W₂ N@P-CF electrode can operate in the negative potential region is exploited to design asymmetric pseudocapacitors by coupling with a polypyrrole on carbon fabric (PPy@CF) as the positive electrode. Remarkably, the W₂ N@P-CF//PPy@CF asymmetric cell can be cycled in a wide voltage window of 1.6 V that is almost two times higher than that of metal nitrides symmetric SCs. The pseudocapacitive behavior with matching different potential regions of W₂ N@P-CF and PPy@CF, considerably enhance performance of asymmetric device. The device delivers high volumetric capacity (7.1 F cm^-3 ), high energy (2.54 mWh cm^-3 ), power densities, and good cycling stability (88%) over 20 000 cycles. Thus, pseudocapacitive metal nitride-based devices hold a great promise to provide high voltage and improved energy density in aqueous electrolyte.

The Research Development of Quantum Dots in Electrochemical Energy Storage

Quantum dots, which are made from semiconductor materials, possess tunable physical dimensions and outstanding optoelectronic characteristics, and they have aroused widespread interest in recent years. In addition to applications in biomolecular analysis, sensors, organic photovoltaic devices, fluorescence, solar cells, photochemical reagents, light-emitting diodes, and catalysis, quantum dots have attracted mounting attention in the field of electrochemical energy storage owing to their size confinement and anisotropic geometry. In this review, a comprehensive summary is given and the research progress of the study of quantum dots for batteries and electrochemical capacitors in recent years, including their synthesis methods, micro/nanostructural features, and electrochemical performance, is appraised.

Electrochemical Performance of Few-Layer Graphene Nano-Flake Supercapacitors Prepared by the Vacuum Kinetic Spray Method

A few-layer graphene nano-flake thin film was prepared by an affordable vacuum kinetic spray method at room temperature and modest low vacuum conditions. In this economical approach, graphite microparticles, a few layers thick, are deposited on a stainless-steel substrate to form few-layer graphene nano-flakes using a nanoparticle deposition system (NPDS). The NPDS allows for a large area deposition at a low cost and can deposit various metal oxides at room temperature and low vacuum conditions. The morphology and structure of the deposited thin films are alterable by changing the scan speed of the deposition. These changes were verified by field emission scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), and Raman spectroscopy. The electrochemical performances of the supercapacitors, fabricated using the deposited films and H3PO4–PVA gel electrolytes with different concentrations, were measured using a 2-electrode cell. The electrochemical performance was evaluated by cyclic voltammetry, galvanostatic Charge–discharge, and electrochemical impedance spectroscopy. The proposed affordable fabricated supercapacitors show a high areal capacitance and a small equivalent series resistance.

Design and Fabrication of Printed Paper-Based Hybrid Micro-Supercapacitor by using Graphene and Redox-Active Electrolyte

Inspired by future needs of flexible, simple, and low-cost energy storage devices, smart graphene-based micro-supercapacitors on conventional Xerox paper substrates were developed. The use of redox-active species (iodine redox couple) was explored to further improve the paper device's performance. The device based on printed graphene paper itself already had a remarkable maximum volumetric capacitance of 29.6 mF cm^-3 (volume of whole device) at 6.5 mA cm^-3 . The performance of the hybrid electrode with redox-active potassium iodide at the graphene surface was tested. Remarkably, the hybrid device showed improved volumetric capacitance of 130 mF cm^-3 . The maximum energy density for a graphene+KI device in H₂ SO₄ electrolyte was estimated to be 0.026 mWh cm^-3 . Thus, this work offers a new simple, and lightweight micro-supercapacitor based on low-cost printed graphene paper, which will have great applications in portable electronics.

Electrochemical Cutting in Weak Aqueous Electrolytes: The Strategy for Efficient and Controllable Preparation of Graphene Quantum Dots

The controllable and efficient electrochemical preparation of highly crystalline graphene quantum dots (GQDs) in an aqueous system is still challenging. Here, we developed a weak electrolyte-based (typically an ammonia solution) electrochemical method to enhance the oxidation and cutting process and therefore achieve a high yield of GQDs. The yield of GQDs (3-8 nm) is 28%, approximately 28 times higher than the yield of GQDs prepared by other strong electrolytes. The whole preparation process can be accomplished within 2 h because of the effective free radical oxidation process and the suppressed intercalation-induced exfoliation in weakly ionized aqueous electrolytes. The GQDs also showed excellent crystallinity which is obviously better than the crystallinity of GQDs obtained via bottom-up approaches. Moreover, amino-functionalization of GQDs can be realized by manipulating the electrolyte concentration. We further demonstrate that the proposed method can also be expanded to other weak electrolytes (such as HF and H₂S) and different anode precursor materials (such as graphene/graphite papers, carbon fibers, and carbon nanotubes).

Manganese(ii) enhanced fluorescent nitrogen-doped graphene quantum dots: a facile and efficient synthesis and their applications for bioimaging and detection of Hg2+ ions

Manganese ion (Mn²⁺) bonded nitrogen-doped graphene quantum dots (Mn(ii)-NGQDs) with water solubility have been successfully synthesized by a simple, one-pot hydrothermal carbonization, using sodium citrate, glycine and manganese chloride as raw materials.

Technical synthesis and biomedical applications of graphene quantum dots

Graphene quantum dots (GQDs) have generated enormous excitement because of their superiority in chemical inertness, biocompatibility and low toxicity. Due to quantum confinement and edge effects, GQDs have excellent properties, attracting extensive attention from scientists in the fields of chemistry, physics, materials science, biology, and other interdisciplinary sciences. In this review, we aim to present a comprehensive view on the synthesis of GQDs for biological applications. We highlight potential methods like acid oxidation, hydrothermal and solvothermal reactions, microwave-assisted methods, electrochemical oxidation, as well as pyrolysis and carbonization for the successful preparation of GQDs. Meanwhile, four representative types of biomedical application based on GQDs, bioimaging, biosensing, drug delivery, and antimicrobial materials, are introduced and discussed in detail. This work will be very useful for quickly gaining knowledge and experience for synthesizing various GQDs, and developing advanced strategies for creating novel functional GQD-based nanomaterials for further applications in biomedicine, materials science, analytical science, and optical nanodevices.