A novel electrochemical sensor based on TAPT-TFP-COF/COOH-MWCNT for simultaneous detection of dopamine and paracetamol

In this work, a covalent organic framework (COF) TAPT-TFP-COF containing a triazine ring was prepared by a typical Schiff base condensation reaction of 1,3,5-tris-(4-aminophenyl)triazine (TAPT) and 1,3,5-triformyl phloroglucinol (TFP). The TAPT-TFP-COF and carboxyl-functionalized multi-wall carbon nanotubes (COOH-MWCNTs) were drip-coated on glassy carbon electrode respectively to develop a novel and simple electrochemical sensor in order to simultaneously detect dopamine (DA) and paracetamol (PA). COOH-MWCNTs interconnected the TAPT-TFP-COF and acted as bridges between the COF particles, which had a good synergistic effect and accelerated electron transfer. Under optimal conditions, linear responses were obtained over the concentration range 1-190 μM for DA and PA with limits of detection (LOD) of 0.14 μM and 0.19 μM, respectively. Furthermore, the fabricated sensor possesses outstanding repeatability and high selectivity, and can be applied for the determination of DA and PA in dopamine injection and acetaminophen drugs with satisfactory recoveries.

Design of novel, simple, and inexpensive 3D printing-based miniaturized electrochemical platform containing embedded disposable detector for analytical applications

This paper describes the development of a novel, simple, and inexpensive electrochemical device containing an integrated and disposable three-electrode system for detection. The base of this platform consists on a PDMS structure containing microchannels which were prototyped using 3D-printed molds. Pencil graphite leads were inserted into these microchannels and utilized as working, counter and reference electrodes in a novel design. Morphological analysis and electrochemical experiments with benchmark redox probes were carried out in order to evaluate the performance and characterize the miniaturized device proposed. Even using inexpensive materials and a simple fabrication protocol, the electrochemical platform developed provided good repeatability and reproducibility over a low cost (ca. $2 per device), acceptable lifetime (ca. 250 voltammetric runs) and extremely reduced consumption of samples and reagents (order of µL). As proof of concept, the analytical feasibility of the platform was investigated through the simultaneous determination of dopamine (DOPA) and acetaminophen (AC). The two analytes showed linear dependence on the concentration range from 1 to 15 µM and the LODs achieved were 0.21 µM for DOPA and 0.29 µM for AC. Moreover, the platform was successfully applied on the determination of DOPA and AC in spiked blood serum and urine samples. The results obtained with the device described here were better than some reports in literature that use more costly electrodic materials and complex modification steps for the detection of the same analytes.

In situ construction of hollow carbon spheres with N, Co, and Fe co-doping as electrochemical sensors for simultaneous determination of dihydroxybenzene isomers

Control of the active sites/centers plays an important role in the design of novel electrode materials with unusual properties and achievement of sensors with high performance. In this study, three-dimensional (3D) freestanding multi-doped hollow carbon spheres (N-Co-Fe-HCS) with a layer thickness of 30 nm, which contained multiple active sites of the heteroatom N and transition metals (Co and Fe), were synthesized via a simple template method (with SiO2 as the template) and cost-efficient in situ self-polymerization, self-adsorption/reduction and carbonization strategies. Moreover, a series of hollow carbon sphere composites of the same family (N-HCS, N-Co-HCS and N-Fe-HCS) were prepared by this sensible process using the same method and precursors but different doping elements. These differences lead to different active sites/centers from hollow carbon spheres and improved electrocatalytic activities for dihydroxybenzene isomers. Furthermore, N-Co-Fe-HCS as an electrochemical sensor exhibited excellent simultaneous qualitative and quantitative determination performance for catechol (CC) and hydroquinone (HQ). The detection limit and the linear range were 75 nmol L-1 and 0.5-500 μmol L-1 for CC and 80 nmol L-1 and 0.5-1500 μmol L-1 for HQ, respectively. The interference from the components coexisting in river water on the detection of CC and HQ was not observed. These results indicate that high-performance electrochemical sensors can be constructed by in situ multi-element doping into electrode materials to achieve multi-active sites.

Graphitic porous carbon: efficient synthesis by a combustion method and application as a highly selective biosensor

Efficient synthesis of graphitic porous carbon by combustion method for the simultaneous determination of uric acid and dopamine.