Tailoring nanoarchitectonics to control the release profile of payloads

Development of Sustainable Inhibitors for Corrosion Control

Metal degradation due to corrosion is a major challenge in most industries, and its control and prevention has to maintain a balance between efficiency and cost-effectiveness. The rising concern over environmental damage has greatly influenced this domain, as corrosion prevention should comply with the waste regulations of different regions. In this respect, a fundamental question is which modern synthetic materials are more viable from the point of view of their effectiveness. Therefore, this paper is aims to provide an advanced and holistic review of corrosion prevention and control methods. Corrosion prevention techniques have become extensive; however, the literature indicates that polymer coatings, nano-composite coatings, and encapsulation techniques consistently provide the most efficient and feasible outcomes. Therefore, this review article examined the phenomenon of corrosion inhibition mainly from the perspective of these three techniques. Moreover, this research utilized secondary qualitative methods to obtain data and information on comparative techniques. It is found that due to the rapid development of novel materials, corrosion inhibition techniques need to be developed on scales that are more general, so that they could be applied to varying environments. The self-healing coatings are generally based on epoxy-resins incorporated with synthetic compounds such as inhibitor ions, amino-acids, or carboxylic acids. These coatings have become more widespread, especially due to bans on several traditional prevention materials such as compounds of chromium (VI). However, self-healing coatings are comparatively more costly than other techniques because of their method of synthesis and long-term durability. Therefore, although self-healing nanomaterial-based coatings are viable options for limited usage, their utilization in large and complex facilities is limited due to the costs involved. Amino acids and other biological macro-molecules provide another option to attain environmental sustainability and long durability, especially due to their origins being most of naturally occurring compounds such as lignin, cellulose, and proteins.

Design of Nanostructured Protective Coatings with a Sensing Function

Nanostructured multilayered coatings for metals are prepared to simultaneously provide a function of corrosion mitigation and of corrosion sensing for copper substrates. Silica nanocapsules, embedded in one layer of the coating, are used as a host for a corrosion inhibitor and as a sensor, which detect changes of pH value and release inhibitors via an optical signal. Furthermore, another layer in the coating exists in a nanonetwork loaded with another corrosion inhibitor, which is impregnated with a hydrophobic polymer. We demonstrate that a specific arrangement of layers leads to an optimum anticorrosion and sensing performance while the sensing signal can be prolonged for a long time. It is the first time that the fluorophore detecting corrosion is conjugated to the nanosensor and that nanofibers and nanocapsules are used simultaneously to load and release corrosion inhibitors for anticorrosion applications.

Nanocapsules with excellent biocompatibility and stability in protein solutions

Silica nanocapsules (SiO₂NCs) are usually prepared with cationic surfactants that are not cytocompatible. Dialysis can be used to remove surfactants but leads to instability of the SiO₂NCs when they are in the presence of proteins or biological media. Herein, SiO₂NCs stabilized with a reactive surfactant are synthesized to prevent leaching upon dialysis. The SiO₂NCs show superior stability and biocompatibility compared with SiO₂NCs prepared with conventional surfactants. The SiO₂NCs can be used in self-healing materials, smart agriculture and biomedical applications.

Ultrasmall Nanocapsules Obtained by Controlling Ostwald Ripening

We describe here a method to synthesize ultrasmall nanocapsules with a diameter of 6 nm, exhibiting a well-defined core-shell morphology. Remarkably, the nanocapules are synthesized in a miniemulsion process without the need of large amounts of surfactant as commonly used in the microemulsion process. Ultrasmall nanocapsules with an oil core and a silica shell are formed by the concurrent processes of a sol-gel reaction and Ostwald ripening. Using solvents with different water solubilities and alkoxysilanes with different reactivities, we demonstrate that sizes of obtained nanocapsules depend on the ripening rate and alkoxysilane conversion rate. The method can be also used for encapsulating natural oils such as peppermint oil and limonene. This work shows that the Ostwald ripening phenomenon can be employed beneficially for the preparation of very small colloids.

Preparation of the protein corona: How washing shapes the proteome and influences cellular uptake of nanocarriers

A protein coat, termed the protein corona, assembles around the nanocarriers´ surface once it gets in contact with a biological environment. We show that the media used for the washing of protein corona can be crucial. This is true for the downstream analysis as well as for the pre-coating used in in vitro or in vivo. This has been widely overlooked so far. In this paper we focus on eight different washing media and analyze how they influence the composition of the hard protein corona of several nanocarriers incubated with human blood plasma and serum. SDS-PAGE and LC-MS analysis showed major differences in protein corona profiles when using diverse washing media. While plasma and serum proteins already have different complexities, each washing media changes the composition of proteins detected by downstream methods with different key proteins bound to the nanocarriers´ surface. Furthermore, the protein structure of the most abundant blood proteins incubated in the different media was analyzed with nanoDSF. This also emphasized the importance of the washing media, which had a significant influence on the protein adsorption stability. Lastly, cell uptake experiments for HeLa and RAW 264.7 macrophages also indicated an influence of the washing media. In conclusion, picking a specific washing media is on the one hand an important factor for downstream detection of protein compositions and may on the other hand be used to deliberately tune the protein corona for pre-adsorbed proteins from complex protein compositions. This might further support a guided delivery of the nanocarrier to a desired location within a physiological environment. STATEMENT OF SIGNIFICANCE: The successfully application of nanocarriers as drug delivery vehicles is currently hampered by a limited understanding of the nanocarriers´ behavior in a complex biological environment. Once the nanocarrier comes into contact with blood plasma or serum, biomolecules rapidly adsorb onto their surface, covering the nanocarriers and forming a protein corona, which then dictates their biological identity. Analyzing the composition of this dynamic network of bound molecules, has already been shown to be influenced by various factors. However, the impact of the washing media used for the protein corona preparation has so far been neglected. In the present study, we demonstrate a quantitative influence of the washing media on the composition of the hard corona of different nanocarrier systems, which additionally affects protein stability and cellular uptake behavior.

Silica Nanocapsules with Different Sizes and Physicochemical Properties as Suitable Nanocarriers for Uptake in T-Cells

Introduction

Adoptive T-cell immunotherapy emerged as a powerful and promising cancer therapy, as the problem regarding the immuno-reaction between different donors and recipients can be avoided. However, this approach is challenging. After long cultivation and expansion under laboratory media conditions, T-cells are losing their viability and function due to immune checkpoint proteins, leading to decreased efficiency in killing cancer cells. Therefore, a new strategy to improve T-cell survival and function is needed. With the advantages of nanotechnology and the biocompatibility of silica-based material, silica nanocapsules (SiNCs) provide an ideal delivery system to transport therapeutic biomolecules to T-cells. Up to now, there is a lack of cellular uptake studies of nanocarriers towards T-cells.

Methods

We systematically studied the influence of various physicochemical properties such as sizes, core hydrophobicities, surface charges, and surface functionalities of SiNC for their impact on cellular uptake and toxicity in CD8⁺ T-cells by flow cytometry and confocal laser scanning microscopy. Cytokine secretion assay was performed using the enzyme-linked immunosorbent assay. To identify suitable uptake conditions for SiNCs into CD8⁺ T-cells, the impact of human serum in cell culture medium was also investigated.

Results

The major impact on cellular uptake and toxicity was found to be size- and dose-dependent. Smaller sizes of SiNCs than 100 nm caused significant toxicity to the cells. It was found that the formed protein corona reduced the toxicity of the SiNCs. However, it also inhibited their uptake.

Conclusion

Overall, we present a set of different criteria for a suitable design of nanocarriers and cell culture conditions, which need to be carefully considered for T-cell immunotherapy in vitro to facilitate uptake while avoiding toxicity.

Optimized synthesis of isocyanate microcapsules for self-healing application in epoxy composites

Microcapsules containing isophorone diisocyanate were fabricated in oil-in-water emulsion. The emulsification effect of different emulsifiers during the capsule synthesis was systematically investigated by optical microscope. Three kinds of shell materials were discussed to obtain the high core content, smooth-surfaced, and robust capsule by scanning electronic microscope and Fourier transform infrared spectroscopy. Self-healing performance of corresponding self-healing epoxy composites was fully evaluated by accelerated corrosion test and mechanical test. The results demonstrated that high core content and smooth-surfaced capsules with dense composite shell could be synthesized in polyvinyl alcohol emulsion, and the core content of the optimized capsules was determined as 71.3–84.6 wt% at the capsule size from 35 µm to 154 µm. In addition, the optimized capsules had good processing properties and the corresponding self-healing epoxy composites exhibited excellent core release and self-healing performance.

Regulating Payload Release from Hybrid Nanocapsules with Dual Silica/Polycaprolactone Shells

We describe a facile strategy to synthesize hybrid nanocapsules with an oil core for hindering interactions between payloads and silica shell. Polycaprolactone/silica nanocapsules are synthesized by an interfacial sol-gel process occurring simultaneously with internal phase separation of the polymer produced by a miniemulsion-solvent evaporation technique. The localization of the polycaprolactone in the nanocapsules is depending on the ratio between polymer and silica. Formation of hybrid nanocapsules is found to significantly hinder interactions of drugs such as ibuprofen and carbamazepine with the silica surface.

Self-assembly as a key player for materials nanoarchitectonics

The development of science and technology of advanced materials using nanoscale units can be conducted by a novel concept involving combination of nanotechnology methodology with various research disciplines, especially supramolecular chemistry. The novel concept is called 'nanoarchitectonics' where self-assembly processes are crucial in many cases involving a wide range of component materials. This review of self-assembly processes re-examines recent progress in materials nanoarchitectonics. It is composed of three main sections: (1) the first short section describes typical examples of self-assembly research to outline the matters discussed in this review; (2) the second section summarizes self-assemblies at interfaces from general viewpoints; and (3) the final section is focused on self-assembly processes at interfaces. The examples presented demonstrate the strikingly wide range of possibilities and future potential of self-assembly processes and their important contribution to materials nanoarchitectonics. The research examples described in this review cover variously structured objects including molecular machines, molecular receptors, molecular pliers, molecular rotors, nanoparticles, nanosheets, nanotubes, nanowires, nanoflakes, nanocubes, nanodisks, nanoring, block copolymers, hyperbranched polymers, supramolecular polymers, supramolecular gels, liquid crystals, Langmuir monolayers, Langmuir-Blodgett films, self-assembled monolayers, thin films, layer-by-layer structures, breath figure motif structures, two-dimensional molecular patterns, fullerene crystals, metal-organic frameworks, coordination polymers, coordination capsules, porous carbon spheres, mesoporous materials, polynuclear catalysts, DNA origamis, transmembrane channels, peptide conjugates, and vesicles, as well as functional materials for sensing, surface-enhanced Raman spectroscopy, photovoltaics, charge transport, excitation energy transfer, light-harvesting, photocatalysts, field effect transistors, logic gates, organic semiconductors, thin-film-based devices, drug delivery, cell culture, supramolecular differentiation, molecular recognition, molecular tuning, and hand-operating (hand-operated) nanotechnology.

Visible light active nanofibrous membrane for antibacterial wound dressing

Chronic wound infections, especially due to the emergence of multidrug resistance in bacteria, require the urgent development of alternative antibacterial therapies. Here, we developed a new class of hydrogel nanofibrous membranes that show visible light-induced disinfection. The presented photocatalytic disinfection is based on the generation of reactive singlet oxygen from a conjugated microporous polymer upon visible light irradiation. Therefore, sustained protection of the wound area can be provided in the presence of visible light. Fabrication of the photoactive wound dressing consists of first synthesizing photoactive conjugated microporous polymer nanoparticles by miniemulsion polymerization and subsequently embedding the nanoparticles in polyvinyl alcohol hydrogel nanofibers by colloid-electrospinning. The fibers were then crosslinked in glutaraldehyde/HCl vapor to be water-insoluble. This nanoparticle-in-nanofiber structure allows for a flexible combination of the properties of the nanoparticles and supporting nanofibers. The disinfecting properties of the membranes were evaluated with the inactivation of Escherichia coli K-12 and Bacillus subtilis as model systems of Gram-negative and Gram-positive bacteria, as well as the inhibition of biofilm growth under irradiation of visible light. Cytotoxicity tests on fibroblast cells revealed a high cytocompatibility of the membranes. Furthermore, the good mechanical properties of the membranes allow for their facile removal after use and prevent the leakage of the embedded nanoparticles into the wound, making the photoactive hydrogel membranes a promising candidate for active wound dressing materials.

pH-Sensitive Polymer Conjugates for Anticorrosion and Corrosion Sensing

In 2015, the global cost of corrosion in the world was estimated to be around 2.5 trillion dollars and has been continuously increasing. The active protection by corrosion inhibitors is a well-known technique for protecting metals against corrosion. However, one major disadvantage is that corrosion inhibitors can be leached in the environment, even when corrosion does not occur. We design and synthesize smart polymer/corrosion inhibitor conjugates as a new generation of materials for corrosion protection. These materials release inhibitors upon acidification, which may occur either by acidic rain or as a consequence of the metal corrosion process itself. A polymerizable derivative of 8-hydroxyquinoline (8HQ), an effective corrosion inhibitor, is prepared so that it contains acid-labile β-thiopropionate linkages. The monomer is copolymerized with ethyl acrylate, and the obtained functional polymer is processed to form nanoparticles. Under acidic conditions, >95% 8HQ is released from the nanoparticles of the polymer conjugates after 14 days. However, the release was significantly slower under neutral conditions, reaching only 15% during the same period. Additionally, nonconjugated 8HQ can be physically entrapped in the nanoparticles of the polymer conjugates by encapsulation. The nonconjugated 8HQ is then released in less than 30 min so that the coexistence of both conjugated and nonconjugated 8HQ in the nanoparticles allows a release profile, which is a hybrid of sustained and burst releases. Furthermore, the nanoparticles are advantageously used as nanosensors. The 8HQ released from the nanoparticles displays enhanced fluorescence upon chelation with aluminum ions. Therefore, the nanoparticles can be used simultaneously for corrosion sensing and protection.

Encoding materials for programming a temporal sequence of actions

Materials are usually synthesized to allow a function that is either independent of time or that can be triggered in a specific environment.

Hemiaminal ether linkages provide a selective release of payloads from polymer conjugates

Hemiaminal linkages allow for a selective and pH-responsive release of triazoles from polymer conjugates.

Nanofibrous photocatalysts from electrospun nanocapsules

We present the design of multicompartment metal oxide/silica nanofibrous photocatalysts by colloid-electrospinning and subsequent calcination. During the calcination process, silica nanomaterials are cemented to form the fibrous framework and metal oxide precursors are crystallized inside and onto the fibers. This multicompartment nanofibrous structure, constructed with nanoparticles and core-shell nanocapsules, is therefore beneficial for the separation of the materials and the light utilization due to the multiple reflections and scattering of incident light in the cavities. The photocatalytic activity of the fibers was verified by the successful degradation of a model dye rhodamine B. This synthetic methodology is a universal approach for the fabrication of nanomaterials with hierarchical hollow structures, which are emerging in energy and environmental related applications.

Structural Evolution and Formation Mechanism of the Soft Colloidal Arrays in the Core of PAAm Nanofibers by Electrospun Packing

Electrospinning provides a facile and versatile method for generating nanofibers from a large variety of starting materials, including polymers, ceramic, composites, and micro-/nanocolloids. In particular, incorporating functional nanoparticles (NPs) with polymeric materials endows the electrospun fibers/sheets with novel or better performance. This work evaluates the spinnability of polyacrylamide (PAAm) solution containing thermoresponsive poly(N-isopropylacrylamide-co-tert-butyl acrylate) microgel nanospheres (PNTs) prepared by colloid electrospinning. In the presence of a suitable weight ratio (1:4) of PAAm and PNTs, the in-fiber arrangements of PNTs-electrospun fibers will evolve into chain-like arrays and beads-on-string structures by confining of PAAm nanofibers, and then the free amide groups of PAAm can bind amide moieties on the surfaces of PNTs, resulting in the assembling of PNTs in the cores of PAAm fibers. The present work serves as a reference in the fabrication of novel thermoresponsive hybrid fibers involving functional nanospheres via electrospun packing. The prepared nanofibers with chain-like and thermoresponsive colloid arrays in the cores are expected to have potential application in various fields.

Fabrication of aqueous-based dual drug loaded silk fibroin electrospun nanofibers embedded with curcumin-loaded RSF nanospheres for drugs controlled release

This paper presents a new nanofabrication method for dual drug loaded regenerated silk fibroin (RSF) nanofibers, based on a simple, colloid-electrospinning technique.

Versatile multicompartment nanoparticles constructed with two thermo-responsive, pH-responsive and hydrolytic diblock copolymers

Multicompartment block copolymer nanoparticles constructed with two smart diblock copolymers are prepared and their versatile morphology upon stimuli is demonstrated.

Control of the release of functional payloads from redox-responsive nanocapsules

Stimuli-responsive nanocontainers allow for storage and controlled release of functional payloads in response to external stimuli.