Horizontal carbon nanotube alignment

Anisotropic Alignment of Bacterial Nanocellulose Ionogels for Unconventionally High Combination of Stiffness and Damping

Ionogels are emerging materials for advanced electrochemical devices; however, their mechanical instability to external stresses has raised concerns about their safety. This study reports aligned bacterial nanocellulose (BC) ionogel films swelled with the model ionic liquid (IL) of 1-ethyl-3-methylimidazolium tetrafluoroborate (EMImBF₄) for an unprecedented combination of high stiffness and high energy dissipation without significant loss of ionic conductivity. The aligned BC ionogel films are prepared through wet-state stretching methods, followed by drying and swelling by ILs. The aligned ionogel films exhibit significantly improved dynamic mechanical properties, overcoming the mechanical conventional limit of traditional materials by 2.0 times at 25 °C and by a maximum of 4.0 times at 0 °C. Additionally, the same samples exhibit relatively high ionic conductivities of 0.16 mS cm^-1 at 20 °C and 0.45 mS cm^-1 at 60 °C with storage moduli over 10 GPa. The synergistic effect of the mechanical reinforcements by alignment of the BC nanofibers and the plasticizing effects by ILs could be attributed to the significant enhancement of dynamic mechanical properties and the retention of ionic conductivities. These results will lead to a deeper understanding of the material design for mechanically superior ionogel systems with increasing demands for advanced electronic and electrochemical devices.

Fabrication of Dipole-Aligned Thin Films of Porphyrin J-Aggregates over Large Surfaces

We report a new approach for large-scale alignment of micron-sized J-aggregates of a derivative of porphyrin onto planar glass substrates. We applied a unidirectional nitrogen flow to an aqueous dye drop deposited onto a glass substrate to form an about 5 nm thick film of aligned J-aggregates over macroscopic surface areas up to several millimeters. The inter-aggregate distance is ∼500 nm, and it scales with the nitrogen pressure. We verified the film thickness and J-aggregate alignment using multimodal microscopy and spectroscopy techniques. Our technique is fast, simple, and cost-effective for producing large two-dimensional (2-D) arrays of aligned emitters.

Aerosol-Jet-Printed Preferentially Aligned Carbon Nanotube Twin-Lines for Printed Electronics

The alignment of carbon nanotubes (CNTs) is of great importance for the fabrication of high-speed electronic devices such as a transistor as the electron mobilities can be greatly enhanced with aligned CNT architectures. Here, we report, for the first time, a methodology to obtain preferentially aligned CNT traces on a flexible polyimide substrate utilizing the high-resolution aerosol jet printing technique and evaporation-driven self-assembly process. A self-assembled twin-line of CNT ("coffee-ring" effect) is observed in the deposit patterns, and the field-emission scanning electron microscopy (FESEM) images reveal highly self-ordered CNT in the resulting CNT twin-line. Various aerosol jet parameters have been investigated to obtain printed tracks in the range of 30-80 μm and conductive tracks (single CNT twin-line width) in the range of 600-1500 nm. The smallest CNT twin-line obtained in this experiment is found to be approximately 16 μm using a suitable sheath-to-atomizer flow ratio. Image analysis of FESEM images confirms the formation of aligned CNT traces at the ink periphery. The effect of the line width on the degree of alignment of the CNT is studied and evaluated. The electrical resistance of the CNT trace is adjustable by controlling the number of print passes and print speed.

Aerosol-Jet-Printed Preferentially Aligned Carbon Nanotube Twin-Lines for Printed Electronics

The alignment of carbon nanotubes (CNTs) is of great importance for the fabrication of high-speed electronic devices such as a transistor as the electron mobilities can be greatly enhanced with aligned CNT architectures. Here, we report, for the first time, a methodology to obtain preferentially aligned CNT traces on a flexible polyimide substrate utilizing the high-resolution aerosol jet printing technique and evaporation-driven self-assembly process. A self-assembled twin-line of CNT ("coffee-ring" effect) is observed in the deposit patterns, and the field-emission scanning electron microscopy (FESEM) images reveal highly self-ordered CNT in the resulting CNT twin-line. Various aerosol jet parameters have been investigated to obtain printed tracks in the range of 30-80 μm and conductive tracks (single CNT twin-line width) in the range of 600-1500 nm. The smallest CNT twin-line obtained in this experiment is found to be approximately 16 μm using a suitable sheath-to-atomizer flow ratio. Image analysis of FESEM images confirms the formation of aligned CNT traces at the ink periphery. The effect of the line width on the degree of alignment of the CNT is studied and evaluated. The electrical resistance of the CNT trace is adjustable by controlling the number of print passes and print speed.