High photoluminescent carbon based dots with tunable emission color from orange to green

Tracking the Cellular Degradation of Silver Nanoparticles: Development of a Generic Kinetic Model

Understanding the degradation of nanoparticles (NPs) after crossing the cell plasma membrane is crucial in drug delivery designs and cytotoxicity assessment. However, the key factors controlling the degradable kinetics remain unclear due to the absence of a quantification model. In this study, subcellular imaging of silver nanoparticles (AgNPs) was used to determine the intracellular transfer of AgNPs, and single particle ICP-MS was utilized to track the degradation process. A cellular kinetic model was subsequently developed to describe the uptake, transfer, and degradation behaviors of AgNPs. Our model demonstrated that the intracellular degradation efficiency of AgNPs was much higher than that determined by mimicking testing, and the degradation of NPs was highly influenced by cellular factors. Specifically, deficiencies in Ca or Zn primarily decreased the kinetic dissolution of NPs, while a Ca deficiency also resulted in the retardation of NP transfer. The biological significance of these kinetic parameters was strongly revealed. Our model indicated that the majority of internalized AgNPs dissolved, with the resulting ions being rapidly depurated. The release of Ag ions was largely dependent on the microvesicle-mediated route. By changing the coating and size of AgNPs, the model results suggested that size influenced the transfer of NPs into the degradation process, whereas coating affected the degradation kinetics. Overall, our developed model provides a valuable tool for understanding and predicting the impacts of the physicochemical properties of NPs and the ambient environment on nanotoxicity and therapeutic efficacy.

Synthesis of N-doped carbon dots for highly selective and sensitive detection of metronidazole in real samples and its cytotoxicity studies

The current investigation reports the synthesis of N-CDs using glucosamine, ascorbic acid, and ethylenediamine precursors by a simple hydrothermal technique. The formation of N-CDs was proved by various characterisation techniques such as X-ray Photoelectron Spectroscopy (XPS), X-ray Diffraction (XRD), Transmission Electron Microscopy (TEM), and Fourier-Transform Infrared Spectrophotometer (FT-IR). The optical properties were investigated by fluorescence and UV-vis spectrophotometer. Also, N-CDs showed high selectivity in detecting the MTZ compared to several other analytes. However, the metronidazole serves as an antibiotic against several microbial diseases but also a genotoxic, carcinogenic to the human when used in excessive dosage. The synthesised N-CDs showed high selectivity in detecting the MTZ compared to several other analytes. Besides, the cytotoxicity of the N-CDs was studied to evaluate its toxicity against the HeLa cancer cells. It showed 65.6% cell viability and 34.3% toxicity against the cancerous cells, and similarly 71% of cells viability against H9C2 cells. Thus, the current investigation explores the promising selective sensing of N-CDs against MTZ, along with that, it proved its cytotoxicity against HeLa cancerous cells and non-toxicity against H9C2 cells. The synthesised CDs can be better MTZ sensors and anti-cancer agents on further development at the industrial scale.

Green- and Red-Emitting Fluorescent Silicon Nanoparticles: Synthesis, Mechanism, and Acid Phosphatase Sensing

Until now, the green and facile synthesis of multicolor fluorescent silicon nanoparticles (SiNPs) with favorable biocompatibility for cellular imaging and biosensors is still a challenge. Herein, a facile one-step room temperature method for preparing fluorescent SiNPs displayed different emission wavelengths was reported. Green and red fluorescent SiNPs (G-SiNPs and R-SiNPs) were synthesized by adjusting the concentration of the reducing agent 2,4-diaminophenol hydrochloride when the amount of N-[3-(trimethoxysilyl)-propyl]-ethylenediamine was consistent. Characterized by Fourier transform infrared spectroscopy, transmission electron microscopy, and X-ray photoelectron spectroscopy, the results revealed that the G-SiNPs and R-SiNPs were assembled by polymerization of different building blocks, and the emission characteristics of these SiNPs were attributed to the difference in their structural composition and particle size. Interestingly, these fluorescent SiNPs exhibited excellent water solubility, salt tolerance, pH stability, photobleaching resistance, and low cytotoxicity, which facilitated multicolor cell imaging, and further led to these SiNPs were highly attractive in a variety of applications, such as multi-channel sensing and biological imaging. Furthermore, the R-SiNPs have shown the potential to detect acid phosphatase, which is a biomarker of prostate cancer.

Cuttlefish ink-based N and S co-doped carbon quantum dots as a fluorescent sensor for highly sensitive and selective para-nitrophenol detection

Para-nitrophenol (PNP) is an important raw material for organic synthesis and its extensive use has produced a series of environmental problems. Here, we develop a highly sensitive and selective fluorescent detection method for PNP with cuttlefish ink-based carbon quantum dots (CQDs). The cuttlefish ink, which is rich in eumelanin, is utilized as the only precursor to synthesize the CQDs via a one-step hydrothermal method. The resultant CQDs were co-doped with nitrogen and sulfur and exhibited excellent fluorescence properties. Two optimal emissions can be observed at the excitation/emission wavelengths of 320/385 nm and 390/465 nm, respectively. In the presence of PNP, the two emissions are remarkably quenched. PNP can be measured in the linear detection concentration range of 1.25-50 μM (Em = 385 nm and R² = 0.9884) or 1.25-27.5 μM (Em = 465 nm and R² = 0.9818) with a detection limit of 0.05 μM. Significantly, it is found that a much wider linear detection range of 0.05-125 μM with a lower detection limit of 0.039 μM (3σ/k) can be achieved when log(I_{385 nm} + I_{465 nm}) was utilized to quantify PNP. The investigations of the sensing mechanism suggested that the inner filter effect and photoinduced electron transfer of PNP and N,S-CQDs leads to fluorescence quenching. The sensing method is successfully applied for PNP detection in real water samples with satisfactory recoveries (91.18-103.14%). A new sustainable waste-prevention strategy of cuttlefish ink and a feasible alternative to PNP detection methods is provided in this article.

Photoluminescent sea urchin-shaped carbon-nanobranched polymers as nanoprobes for the selective and sensitive assay of hypochlorite

This work reports donor-acceptor type sea urchin-like carbon nanobranched polymers (SUCNPs). As a novel carbon-based nanomaterial, SUCNPs were effectively synthesized for the first time through a facile and economical solvothermal approach employing uric acid and l-cysteine as nitrogen/sulfur sources. The nitrogen-rich structure of the heterocylic aromatic polymer led to a blue fluorescence at the excitation/emission maxima of 350/436 nm with robust photostability. SUNCPs showed highly selective ability towards hypochlorite (ClO-) against other relevant interfering substances. Upon exposure to a growing concentration of ClO-, SUCNPs fluorescence presented a gradual rise with a remarkable blue shift by virtue of the inhibition of photoinduced charge transfer (PCT) process. A linear relationship was established between the fluorescence intensity ratio (I 401 nm/I 436 nm) and the ClO- concentration in the range of 0.1-200 μM. The detection limit was as low as 30 nM (3σ/k). The "turn-on" type nanoprobe was further used in real samples and paper-based analytical chips efficiently, implying its application in a sophisticated and convenient platform.

One-pot synthesis of a carbon dots@zeolitic imidazolate framework-8 composite for enhanced Cu2+ sensing

A novel composite (CDs@ZIF-8) based on carbon dots (CDs) and zeolitic imidazolate framework (ZIF-8) was successfully synthesized by encapsulating CDs into the pores of ZIF-8 through a simple one-pot solvothermal method. The as-synthesized CDs@ZIF-8 inherited simultaneously the strong adsorption capacity of ZIF-8 and the excellent optical properties of CDs. The composite exhibited excellent dispersibility and high structural and fluorescence stability in aqueous solution, which could be employed as an excellent turn-off mode fluorescent probe to detect Cu²⁺. The large specific surface area and strong adsorption properties of ZIF-8 enabled the resultant composite to effectively enrich Cu²⁺ for further improving the analytical sensitivity. The possible fluorescence quenching mechanism has also been discussed in detail and it was found that the effective fluorescence quenching of Cu²⁺ to CDs@ZIF-8 could be attributed to the strong ability of Cu²⁺ to combine with the carboxyl group or amino group on the CD surface and the strong adsorption capacity of ZIF-8; their synergistic effect resulted in effective fluorescence quenching.

Photo-Stimulated Polychromatic Room Temperature Phosphorescence of Carbon Dots

Single-component multicolor luminescence, particularly phosphorescence materials are highly attractive both in numerous applications and in-depth understanding the light-emission processes, but formidable challenges still exist for preparing such materials. Herein, a very facile approach is reported to synthesize carbon dots (CDs) (named MP-CDs) that exhibit multicolor fluorescence (FL), and more remarkably, multicolor long-lived room temperature phosphorescence (RTP) under ambient conditions. The FL and RTP colors of the CDs powder are observed to change from blue to green and cyan to yellow, respectively, with the excitation wavelength shifting from 254 to 420 nm. Further studies demonstrate that the multicolor emissions can be attributed to the existence of multiple emitting centers in the CDs and the relatively higher reaction temperature plays a critical role for achieving RTP. Given the unique optical properties, a preliminary application of MP-CDs in advanced anti-counterfeiting is presented. This study not only proposes a strategy to prepare photo-stimulated multicolor RTP materials, but also reveals great potentials of CDs in exploiting novel optical materials with unique properties.

Dual-emission carbon dots achieved by luminescence center modulation within one-pot synthesis for a fluorescent ratiometric probe of pH, Hg2+, and glutathione

Dual-emission carbon dots were synthesized by one-pot hydrothermal pyrolysis of citric acid and polyethyleneimine in the presence of rhodamine B at 160 °C for 5 h. The carbon dots have an average diameter of 2.51 nm with rhodamine moiety on their surface. Two emission bands centered at 447 and 581 nm are exhibited in their fluorescence spectra excited at 360 nm, and the former is sensitive while the latter is insensitive to Hg²⁺ and pH. Glutathione (GSH) can recover the fluorescence quenched by Hg²⁺. Therefore, the dual-emission carbon dots were developed as a fluorescent ratiometric probe employing the ratio of the two intensities at 447 and 581 nm (R_I447/I581) as the signal for the determinations of pH, Hg²⁺, and GSH. In the range of 5.0-10.0, a good linear relationship between R_I447/I581 and pH was built with a regression equation of R_I447/I581 = 11.95-0.56 pH (R² = 0.998). In the range from 0.0 to 8.0 μM, an excellent linear relationship between R_I447/I581 and the concentration of Hg²⁺ was obtained with a calibration equation of R_I447/I581 = 6.2317-0.4458c (R² = 0.995) and a limit of detection (LOD) of 0.24 μM. In the range from 1.0 to 10.0 μM, a linear equation, R_I447/I581 = 1.9133-0.4157c (R² = 0.995), was calibrated between R_I447/I581 and the concentration of glutathione with a LOD of 0.27 μM. The recoveries for the determinations of Hg²⁺ and GSH in real samples were in the ranges of 94.6 to 103.8% and 94.3 to 104.2%, respectively. Graphical abstract Dual-emission carbon dots achieved by luminescence center modulation within one-pot synthesis for a fluorescent ratiometric probe of pH, Hg²⁺, and glutathione.

Carbon-based dot nanoclusters with enhanced roles of defect states in the fluorescence and singlet oxygen generation

Carbon-based dot nanoclusters for red emission and high yield singlet oxygen generation are reported for the first time.

Ultra-high quantum yield ultraviolet fluorescence of graphitic carbon nitride nanosheets

Graphitic carbon nitride (g-CN) nanosheets (CNNs) with an ultra-high quantum yield (80.1%) ultraviolet fluorescence (FL) were prepared. The effects of the lateral size and the polymerization temperature on the optical properties of CNNs have been studied. The ultraviolet FL was proved to have originated from the isolated melem units according to the density functional theory calculation and mass spectra. The obtained CNNs are further used as a pH probe due to the dependence of the FL signal on the pH of the solution.

High quantum yield blue- and orange-emitting carbon dots: one-step microwave synthesis and applications as fluorescent films and in fingerprint and cellular imaging

A high quantum yield (QY) is the key requirement for implementing carbon dots (CDs) in nearly all applications. In this work, blue emissive N-doped CDs with a QY of 83% and orange emissive N-doped CDs with a QY of 47% were successfully prepared using resorcinol and phloroglucin as carbon resources in formamide by one-step microwave synthesis, respectively. Formamide not only plays a role as the solvent but also takes part in the formation of the high QY CDs. It is demonstrated that the as-prepared blue- and orange-emitting N-doped CDs with a high QY can be uniformly dispersed into glue and be fabricated as CD/glue fluorescent composites for fluorescent films and fingerprint imaging. Furthermore, these CDs also show excellent cellular imaging capability.

A yellow-emissive carbon nanodot-based ratiometric fluorescent nanosensor for visualization of exogenous and endogenous hydroxyl radicals in the mitochondria of live cells

A ratiometric fluorescent nanosensor with high sensitivity was developed for visualization of hydroxyl radicals in the mitochondria of live cells.

Orange, yellow and blue luminescent carbon dots controlled by surface state for multicolor cellular imaging, light emission and illumination

Three kinds of carbon dots (CDs) with different photoluminescence (PL) (blue, yellow or orange) were synthesized by microwave heating. They display wavelength-independent excitation wavelengths (in the range from 444 to 574 nm), similar average particle size (from 3.7 to 4.2 nm), and fluorescence lifetimes (from 2.7 to 3.1 ns). Color and quantum yields (from 8 to 45% in ethanol) are related to the oxidation degree and the number of N-functional groups on their surface. The CDs are shown to be viable nanoprobes for multicolor imaging of cells. Three composite phosphors were obtained by coating the various CDs on starch particle. The resulting nanomaterials emit solid-state fluorescence with a quantum yield of ≥16%. They were used to fabricate luminescent blocks and light-emitting diodes with controllable color temperature. Graphical abstract (a) The synthesis process of the three carbon dots (CDs). The application in cell imaging (b), starch/CD phosphors (c), starch/CD phosphors-based luminescent blocks (d) and light-emitting diodes (e). (λex: excitation wavelength).

A rapid microwave synthesis of green-emissive carbon dots with solid-state fluorescence and pH-sensitive properties

The emerging carbon quantum dots (CQDs) have been attracting significant attention for their prominent fluorescence, excellent stability and outstanding biocompatibility. Here, we report a facile one-step synthesis of highly fluorescent CQDs by using phthalic acid and triethylenediamine hexahydrate as precursors through a simple microwave-assisted method. The reaction time needed is only 60 s, which is less time-consuming than most previous reports. The phthalic acid with a benzene ring can improve the photoluminescence properties of CQDs as it can provide foreign sp2 conjugating units, and then finally result in long-wavelength emission. The synthesized CQDs were fully characterized by transmission electron microscopy, X-ray photoelectron spectroscopy and Fourier transform infrared spectroscopy. Besides, the impacts of different freed ratio on physical and chemical properties of CQDs were investigated in detail. The prepared CQDs exhibited strong green fluorescence with a broad maximum emission wavelength. The quantum yields of the CQDs can reach 16.1% in aqueous solution and they were successfully used in cell imaging with good biocompatibility. Moreover, in solid state, the CQDs with the feed ratio of 1 : 0.5 showed a strong green-yellow fluorescence which may have great potential to fabricate optoelectronic devices. Furthermore, the prepared CQDs also showed high pH sensitivity and can act as a fluorescence nanosensor for pH sensing.

One-Pot Synthesis of a Magnetic, Ratiometric Fluorescent Nanoprobe by Encapsulating Fe3O4 Magnetic Nanoparticles and Dual-Emissive Rhodamine B Modified Carbon Dots in Metal-Organic Framework for Enhanced HClO Sensing

In this work, a new magnetic, ratiometric fluorescent nanoprobe has been designed and fabricated by encapsulating Fe₃O₄ magnetic nanoparticles (MNPs) and dual-emissive carbon dots into the cavities of metal-organic frameworks (MOFs). This one-pot method combined hybrid characteristics of MOFs with multiple properties of the encapsulated functional materials. The MOF-based nanoprobe possessed the advantages of MOFs (strong adsorption ability, accumulating the analytes), Fe₃O₄ MNPs (magnetic separation), and ratiometric sensors (eliminating the variabilities caused by the instability of the instruments and environment). The MOF-based nanoprobe was dispersible and stable in aqueous solution, and the nanoprobe was applied to HClO sensing. This work will provide a promising strategy for design and synthesis of novel MOF-based composite materials.

Red fluorescent carbon dots with phenylboronic acid tags for quick detection of Fe(III) in PC12 cells

Carbon dots have attracted considerable attention in the field of biosensors and bioimaging because of their excellent optical performance and low toxicity. However, the cellular uptake of the reported carbon dots generally has a low efficiency, which limits their practical applications. In this study, we reported a novel red fluorescent sulfur and nitrogen co-doped carbon dots with small molecular phenylboronic acid tags (i.e. S, N-CDs-PBA). The S, N-CDs-PBA can be taken up rapidly by PC12 cells in twenty minutes and showed high sensitivity for the detection of Fe³⁺ ions. The maximum emission wavelength is at 593 nm under the excitation of 550 nm. The absolute fluorescence quantum yield is 23% in water. The fluorescence can be effectively and selectively quenched by Fe³⁺ ions and the linear response range of Fe³⁺ ions was obtained from 0.3 µM to 5.0 µM with a detection limit as low as 0.1 µM. It could be concluded that the rapid uptake of S, N-CDs-PBA into cells and high photoluminescence quantum yield of red emission are beneficial for quick detection of Fe³⁺ ions.

Solvent-Controlled Synthesis of Highly Luminescent Carbon Dots with a Wide Color Gamut and Narrowed Emission Peak Widths

Carbon dots (CDs) have tremendous potential applications in bioimaging, biomedicine, and optoelectronics. By far, it is still difficult to produce photoluminescence (PL) tunable CDs with high quantum yield (QY) across the entire visible spectrum and narrow the emission peak widths of CDs close to those of typical quantum dots. In this work, a series of CDs with tunable emission from 443 to 745 nm, quantum yield within 13-54%, and narrowed full width at half maximum (FWHM) from 108 to 55 nm, are obtained by only adjusting the reaction solvents in a one-pot solvothermal route. The distinct optical features of these CDs are based on their differences in the particle size, and the content of graphitic nitrogen and oxygen-containing functional groups, which can be modulated by controlling the dehydration and carbonization processes during solvothermal reactions. Blue, green, yellow, red, and even pure white light emitting films (Commission Internationale de L'Eclairage (CIE)= 0.33, 0.33, QY = 39%) are prepared by dispersing one or three kinds of CDs into polyvinyl alcohol with appropriate ratios. The near-infrared emissive CDs are excellent fluorescent probes for both in vitro and in vivo bioimaging because of their high QY in water, long-term stability, and low cytotoxicity.

Effects of C-Related Dangling Bonds and Functional Groups on the Fluorescent and Electrochemiluminescent Properties of Carbon-Based Dots

Single-layer carbon-based dots (SCDs) were chosen as a model to investigate the effect of the C-related dangling bonds with spin S=1/2 and functional groups on the electrochemiluminescent (ECL) and fluorescent (FL) properties of CDs. The C-related dangling bonds and functional groups of SCDs were tuned by chemical reduction with NaBH₄ . There have several main findings via investigating the ECL and FL properties of SCDs before and after the chemical reduction. First, the FL and ECL of CDs are highly dependent on their concentration, and luminescent resonance energy transfer is observed in ECL studies when the concentration of CDs is high. Second, the ECL activity of CDs is greatly enhanced as the C-related dangling bonds increase, proving that the ECL of CDs originates from the C-related dangling bonds. Third, the FL of CDs is the synthesis of the inner FL originated from the contained isolated sp² units and the defect FL from the C-related dangling bonds. The inner FL of CDs is enhanced greatly by removing the carboxyl groups, while the defect FL is increased slightly due to the increased C-related dangling bonds. We believe this study would promote our understanding in the ECL and FL mechanisms of CDs, advancing the applications of CDs based on their ECL and FL properties.

Green synthesis of red-emission carbon based dots by microbial fermentation

A green and facile fermentation method for the synthesis of red-emission carbon based dots has been developed for the first time.

Highly crystalline carbon dots from fresh tomato: UV emission and quantum confinement

In this article, fresh tomatoes are explored as a low-cost source to prepare high-performance carbon dots by using microwave-assisted pyrolysis. Given that amino groups might act as nucleophiles for cleaving covalent bridging ester or ether in the crosslinked macromolecules in the biomass bulk, ethylenediamine (EDA) and urea with amino groups were applied as nucleophiles to modulate the chemical composites of the carbon nanoparticles in order to tune their fluorescence emission and enhance their quantum yields. Very interestingly, the carbon dots synthesized in the presence of urea had a highly crystalline nature, a low-degree amorphous surface and were smaller than 5 nm. Moreover, the doped N contributed to the formation of a cyclic form of core that resulted in a strong electron-withdrawing ability within the conjugated C plane. Therefore, this type of carbon dot exhibited marked quantum confinement, with the maximum fluorescence peak located in the UV region. Carbon nanoparticles greater than 20 nm in size, prepared using pristine fresh tomato and in the presence of EDA, emitted surface state controlled fluorescence. Additionally, carbon nanoparticles synthesized using fresh tomato pulp in the presence of EDA and urea were explored for bioimaging of plant pathogenic fungi and the detection of vanillin.

Facile and large-scale synthesis of green-emitting carbon nanodots from aspartame and the applications for ferric ions sensing and cell imaging

A facile, economical and green strategy to prepare green-fluorescent nitrogen-doped carbon nanodots (N-CDs) with a quantum yield (QY) of approximately 31.91% has been built up, while aspartame was employed as the carbon-nitrogen source for the first time. The prepared N-CDs exhibited ultrahigh brightness, favorable strong photostability and negligible cytotoxicity. The outstanding optical properties are mainly derived from the their robost composition and steric distribution of the doped nitrogen atoms, which have been characterized detailedly. The obtained N-CDs showed highly selective and sensitive response toward ferric ions (Fe³⁺) through a fluorescence static quenching process in a wide linear range of 0.005-60µmol/L. The detection limit was as low as 1.43nmol/L, allowing the analysis of Fe³⁺ in a very simple method. The excitation-dependent luminescent behavior of the obtained N-CDs guaranteed the multicolor emissive property when they were used in cell imaging. And the application for intracellular Fe³⁺ sensing further verified this novel N-CDs may open more opportunities in biosensor, bioimaging and biological assay.

One-step hydrothermal synthesis of photoluminescent carbon nanodots with selective antibacterial activity against Porphyromonas gingivalis

Carbon dots (CDs) with high quantum yield (QY), low toxicity and good biocompatibility are the major quests of biomedical research. In this paper, we develop a green, simple hydrothermal approach to synthesize water-soluble, nontoxic, highly photoluminescent carbon nanodots (CNDs) from Metronidazole, which possess selective antibacterial activity against obligate anaerobes for the first time. Metronidazole was used as a sole precursor to prepare CNDs at 250 °C (CNDs-250) for 8 h. After the CNDs-250 with an average size of 2.9 nm, consisting of a highly carbon crystalline core and various surface groups were obtained, the formation and fluorescence mechanisms of CNDs were further explored by adjusting the reaction time and reaction temperatures, respectively. Biological experimental data proved that CNDs-250 can only inhibit the growth of obligate anaerobes, such as Porphyromonas gingivalis (P. gingivalis) directly, instead of further functionalization. Besides, CNDs-250 with a QY around 28.1% exhibit an obvious excitation-dependent emission, which will be conducive to multicolor bioimaging. And it may not only develop a new approach for researchers to prepare multifunctional CDs, but also provide a valuable strategy for the theranostics of some diseases as well as other fields.