Organocatalytic synthetic route to esters and their application in hydrosilylation process

A facile esterification of α,β-unsaturated aldehydes with alcohols has been developed for the synthesis of esters by using bulky N-heterocyclic (NHC) carbene as a metal-free and eco-friendly organocatalyst. This new protocol has been proved to be effective with a wide substrate scope, giving selective esters in yields greater than 84% under mild conditions. Moreover, proposed synthetic strategy enables modification of various types of silsesquioxanes (SQ) which cannot or are technically difficult to be carried out with known protocols. For the first time, a one-pot sequential esterification/hydrosilylation has been successfully carried out.

Palladium-Catalyzed Esterification of Aryl Fluorosulfates with Aryl Formates

An efficient palladium-catalyzed carbonylation of aryl fluorosulfates with aryl formates for the facile synthesis of esters was developed. The cross-coupling reactions proceeded effectively in the presence of a palladium catalyst, phosphine ligand, and triethylamine in DMF to produce the corresponding esters in moderate to good yields. Of note, functionalities or substituents, such as nitro, cyano, methoxycarbonyl, trifluoromethyl, methylsulfonyl, trifluoromethoxy, fluoro, chloro, bromo, methyl, methoxy, N,N-dimethyl, and [1,3]dioxolyl, were well-tolerated in the reactions, which could be kept for late-stage modification. The reactions employing readily available and relatively robust aryl fluorosulfates as coupling electrophiles could potentially serve as an attractive alternative to traditional cross-couplings with the use of aryl halides and pseudohalides as substrates.

Copper(I) Complexes of Amide Functionalized Bisphosphine: Proximity Enhanced Metal-Ligand Cooperativity and Its Catalytic Advantage in C(sp3)-H Bond Activation of Unactivated Cycloalkanes in Dehydrogenative Carboxylation Reactions

The reactions of amide functionalized bisphosphine, o-Ph2PC6H4C-(O)N(H)C6H4PPh2-o (1) (BalaHariPhos), with copper salts is described. Treatment of 1 with CuX in a 1:1 molar ratio yielded chelate complexes of the type [CuX{(o-Ph2PC6H4C(O)N(H)C6H4PPh2-o)}-κ2-P,P] (X = Cl, 2; Br, 3; and I, 4), which on subsequent treatment with KOtBu resulted in a dimeric complex [Cu(o-Ph2PC6H4C(O)(N)C6H4PPh2-o)]2 (5). Interestingly, complexes 2-4 showed weak N-H···Cu interactions. These weak H-bonding interactions are studied in detail both experimentally and computationally. Also, CuI complexes 2-5 were employed in the oxidative dehydrogenative carboxylation (ODC) of unactivated cycloalkanes in the presence of carboxylic acids to form the corresponding allylic esters. Among complexes 2-5, halide-free dimeric CuI complex 5 showed excellent metal-ligand cooperativity in the oxidative dehydrogenative carboxylation (ODC) in the presence of carboxylic acids to form the corresponding allylic esters through C(sp3)-H bond activation of unactivated cycloalkanes. Mechanistic details of the catalytic process were established by isolating the precatalyst [Cu{(o-Ph2PC6H4C(O)(NH)C6H4PPh2-o)-κ2-P,P}(OOCPh)] (6) and fully characterized by mass spectrometry, NMR data, and single-crystal X-ray analysis. Density functional theory-based calculations further provided a quantitative understanding of the energetics of a series of H atom transfer steps occurring in the catalytic cycle.

A novel quinoline-based NNN-pincer Cu(II) complex as a superior catalyst for oxidative esterification of allylic C(sp3)-H bonds

We report for the first time that the quinoline-based NNN-pincer Cu(II) complex acts as an air stable superior catalyst for the oxidative cross-coupling of the allyl sp³ C-H bond with an acid for the synthesis of allyl esters in a homogeneous system at ambient temperature. The synthesized catalyst, 1, has been well characterized by various analytical techniques (HRMS, single crystal X-ray diffraction, CV, EPR, UV-vis spectroscopy) and showed excellent catalytic activity for the oxidative esterification of allylic C(sp³)-H bonds at 40 °C within a very short period of time (1 h) using only 1 mol% of the catalyst. A wide variety of aromatic allylic esters were synthesized in moderate to good yields, which could be extended to aliphatic allyl esters as well.

Phenanthrenequinone (PQ) catalyzed cross-dehydrogenative coupling of alkanes with quinoxalin-2(1H)-ones and simple N-heteroarenes under visible light irradiation

A direct and convenient strategy to 3-alkylquinoxalin-2(1H)-ones and other alkyl N-heteroarenes via a photocatalyzed alkylation of quinoxalin-2(1H)-ones and other N-heterocycles with commercially available, low-cost alkanes under ambient conditions using phenanthrenequinone (PQ) as a photocatalyst was developed. This transformation has advantages of environment-friendly protocol, mild conditions, good functional-group tolerance, and high yields of products.

From methylarenes to Esters: Efficient oxidative Csp3-H activation promoted by CuO decorated magnetic reduced graphene oxide

Magnetic reduced graphene oxide supported CuO (rGO/Fe3O4-CuO) as the heterogeneous catalyst in cross dehydrogenative coupling (CDC) reactions has been demonstrated for the synthesis of esters using methyl aromatics, aldehydes/benzyl alcohols...

Intermolecular CDC amination of remote and proximal unactivated Csp3 -H bonds through intrinsic substrate reactivity - expanding towards a traceless directing group

An intermolecular radical based distal selectivity in appended alkyl chains has been developed. The selectivity is maximum when the distal carbon is γ to the appended group and decreases by moving from γ → δ → ε positions. In –COO– linked alkyl chains, the same distal γ-selectivity is observed irrespective of its origin, either from the alkyl carboxy acid or alkyl alcohol. The appended groups include esters, N–H protected amines, phthaloyl, sulfone, sulfinimide, nitrile, phosphite, phosphate and borate esters. In borate esters, boron serves as a traceless directing group, which is hitherto unprecedented for any remote C_sp³–H functionalization. The selectivity order follows the trend: 3° benzylic > 2° benzylic > 3° tertiary > α to keto > distal methylene (γ > δ > ε). Computations predicted the radical stability (thermodynamic factors) and the kinetic barriers as the factors responsible for such trends. Remarkably, this strategy eludes any designer catalysts, and the selectivity is due to the intrinsic substrate reactivity.

An intermolecular amination at the distal methylene carbon has been realized in an appended alkyl chain with electron withdrawing groups. Traceless remote C_sp³–H functionalization has been accomplished using borate esters.

Pd-Catalyzed solvent-controlled site-selective arene C-H monoacyloxylation of pyrrolo[2,3-d]pyrimidine derivatives

An efficient and highly regioselective Pd-catalyzed direct arene C(sp²)-H acyloxylation of pyrrolo[2,3-d]pyrimidine derivatives is reported. The key strategy involves the utilization of the unique reactivity of pyrrolo[2,3-d]pyrimidine and the employment of pyrrolo[2,3-d]pyrimidine as the directing group. A variety of monoacyloxylated pyrrolo[2,3-d]pyrimidine derivatives can be achieved by switching the solvents under mild conditions, and they can be further modified and exhibit various biological activities.

Visible-Light-Mediated Difunctionalization of Alkynes: Synthesis of β-Substituted Vinylsulfones Using O- and S-Centered Nucleophiles

An inimitable illustration of a green-light-induced, regioselective difunctionalization of terminal alkynes has been disclosed using sodium arylsulfinates and carboxylic acids in the presence of eosin Y as the photocatalyst. The present methodology is further demonstrated by employing NH₄SCN as an S-centered nucleophile instead of carboxylic acid. The mechanistic investigation reveals a radical-induced iodosulfonylation followed by a base-mediated nucleophilic substitution. The mechanism is supported by various studies, viz., radical-trapping experiment, fluorescence quenching, and CV studies. In this protocol, (Z)-β-substituted vinylsulfones are obtained, exclusively covering a broad range of alkynes and nucleophiles, which are often unaddressed. The present strategy can tolerate structurally discrete substrates with steric bulk and different electronic properties, which provides a straightforward and practical pathway for the synthesis of highly functionalized (Z)-β-substituted vinylsulfones. Herein, C-O and C-S bonds are assembled simultaneously with the concomitant introduction of important functional groups, viz., ester, thiocyanate, and sulfone.

The Rich Legacy and Bright Future of Transition-Metal Catalyzed Peroxide Based Radical Reactions

This personal account is mainly focused on the author's involvement in the field of transition metal-catalyzed peroxide based radical reactions. Over the past decades, radical chemistry has flourished and become crucial in contemporary synthetic organic chemistry. Owing to the presence of a single electron in one orbital, radicals are very unstable and react very fast. To carry out desired transformations and to control the side reactions the stabilizations of these radicals is essential. Fortunately, the implementation of a suitable transition metal and peroxide combination into the radical reactions have proved beneficial. Transition metals not only stabilizes the radicals but also protects them from being quenched by undesired homo-coupling or fragmentation. Transition metal-catalyzed radical-radical reactions provide an innovative way for the construction and derivatization of carbocycles and heterocycles. The objective of this review is to give an overview of the construction and derivatization of heterocycles through the lens of radical chemistry, mainly focusing on research work done by our group.

Direct functionalization of quinoxalin-2(1H)-one with alkanes: C(sp2)-H/C(sp3)-H cross coupling in transition metal-free mode

Considering the significance of pharmaceutically important heterocycles, efficient and highly versatile protocols for the functionalization of diverse heterocycles with easily accessible feedstock are crucial. Here, we have reported selective alkylation of quinoxalin-2(1H)-one with a broad class of hydrocarbons having different C(sp³)-H bonds with varying bond strengths using di-tert-butyl peroxide (DTBP) as an alkoxyl radical mediator for hydrogen atom transfer (HAT). This dehydrogenative coupling approach utilizes feedstock chemicals such as cycloalkanes, cyclic ethers and alkyl arenes as coupling partners. This protocol exhibits good functional group compatibility and selectivity regarding both heterocycles and unactivated alkanes. Moreover, this methodology allows functionalization of relatively strong C-H bonds of adamantane and exclusive selectivity towards 3° C(sp³)-H bonds is observed. We also illustrate the applicability of this C(sp²)-H/C(sp³)-H cross-coupling for practical access to bioactive pharmaceuticals.

I2-Catalyzed oxidative dehydrogenative tandem cyclization of 2-methylquinolines, arylamines and 1,4-dioxane

A novel I2-catalyst oxidative dehydrogenative tandem cyclization of 2-methylquinolines, arylamines and 1,4-dioxane for the construction of 2-([2,2′-biquinolin]-3-yloxy)ethan-1-ol derivatives has been developed under metal-free conditions.

Synthesis of seven-membered lactones by regioselective and stereoselective iodolactonization of electron-deficient olefins

A regio- and stereoselective iodolactonization of internal electron-deficient olefinic acids has been reported, which provides a straightforward access to a series of multi-functionalized seven-membered lactones containing two consecutive chiral centers. The ester substituents on the olefins played a key role in achieving high regioselectivity. This result was proved through experiments and DFT calculations.

Cross-dehydrogenative coupling reactions between arenes (C-H) and carboxylic acids (O-H): a straightforward and environmentally benign access to O-aryl esters

Transition-metal catalyzed cross-dehydrogenative-coupling reactions encompass highly versatile and atom economical methods for the construction of various carbon-carbon and carbon-heteroatom bonds by combining two C(X)-H (X = heteroatom) bonds. Along this line, direct acyloxylation of C-H bonds with carboxylic acids has emerged as a powerful and green approach for the synthesis of structurally diverse esters. In this focus-review we will describe recent progress in direct esterification of aromatic C-H bonds with special emphasis on the mechanistic features of the reactions. Literature has been surveyed until the end of February 2019.

Cobalt-catalyzed C2α-acyloxylation of 2-substituted indoles with tert-butyl peresters

An efficient cobalt-catalyzed C2α selective C(sp3)-H acyloxylation of 2-substituted indoles with tert-butyl peresters to synthesize diverse 2α-acyloxylated indole derivatives is described. This newly developed method exhibits mild conditions, low-cost catalyst, and high functional group compatibility. In addition, the effectiveness of this chemistry is illuminated by a late-stage modification of methylated indomethacin.

Metal-free oxidative acylation/cyclization of N-methacryloyl-2-phenylbenzoimidazole with aryl aldehydes: an easy access to benzimidazo[2,1-a]isoquinolin-6(5H)-ones

A metal-free radical cyclization strategy has been developed for the synthesis of fused benzimidazo[2,1-a]isoquinolin-6(5H)-one derivatives using 70% tert-butylhydroperoxide in water (TBHP).

Iodide/H₂O₂ Catalyzed Intramolecular Oxidative Amination for the Synthesis of 3,2'-Pyrrolidinyl Spirooxindoles

An ammonium iodide/hydrogen peroxide-mediated intramolecular oxidative amination of 3-aminoalkyl-2-oxindoles was achieved, affording the corresponding 3,2'-pyrrolidinyl spirooxindoles and their 6- or 7-membered analogous in moderate to high yields. This metal-free procedure features very mild reaction conditions, non-toxicity and easily handled hydrogen peroxide as a clean oxidant.

Iodine-Catalyzed Chemoselective Hydroamination Reaction Using 5-Mercaptotetrazoles Derivatives

Metal-free chemoselective hydroamination of styrene derivatives has been achieved with high chemoselectivity over sulfenylation of 1H-tetrazole-5-thiol using a catalytic amount of iodine. The scope of this methodology has been extended for the hydroamination of α-substituted styrene derivatives. This reaction involves a single-step C-N-bond formation under atom economical process. This eco-friendly method uses readily available and inexpensive iodine in a catalytic amount.

Peroxy mediated Csp2–Csp3 dehydrogenative coupling: regioselective functionalization of coumarins and coumarin-3-carboxylic acids

Regioselective functionalization of coumarins/coumarin carboxylic acids at C-3 via activation of Csp³–H bonds of ethers under metal-free conditions is developed.

Catalyst-Free Cross-Dehydrogenative Coupling Strategy Using Air as an Oxidant: Synthesis of α-Aminophosphonates

α-Aminophosphonates are synthesized by employing unfunctionalized starting materials using cross-dehydrogenative coupling strategy. This method does not require any catalyst and proceeds in the presence of open air as the only oxidant. Mechanistic studies revealed that the reaction is nucleophile dependent and specific to dialkyl phosphite and N-aryl tetrahydroisoquinoline derivatives.