Continuous Synthesis of a Macrocyclic Sulfite of Polyethylene Glycol by Cascaded Continuous Stirred Tank Reactors (CSTRs)

Many macrocyclic compounds are attractive drug-like molecules or intermediates due to their special properties. However, the bulk synthesis of such compounds are hindered by the necessity of using diluted solutions, in order to prevent intermolecular reactions that yields oligomer impurities, thereby resulting in a low production efficiency. Such challenge can be adequately addressed by using continuous reactors, allowing improved efficiency with smaller space footprints. In this work, we proposed a novel continuous process for the synthesis of a macrocyclic sulfite of tetraethylene glycol (PEG4-MCSi), which is a precursor to a very useful building block, PEG4-macrocyclic sulfate (PEG4-MCS). The basic reaction parameters, including stoichiometry and temperature, were first confirmed with small batch reactions, and the effectiveness of coiled reactors and continuous stirred tank reactors (CSTRs) were compared. Cascaded CSTRs were proven to be suitable, and the reaction parameters were subject to further optimization to give a robust continuous process. The process was then tested with 4 parallel runs for up to 64 h. Finally, the merits and demerits of batch and continuous reactions were also compared, demonstrating the suitability of latter in the bulk production of macrocyclic PEG-MCSi compounds.

Engineering aspects of lipid-based delivery systems: In vivo gene delivery, safety criteria, and translation strategies

Defects in the genome cause genetic diseases and can be treated with gene therapy. Due to the limitations encountered in gene delivery, lipid-based supramolecular colloidal materials have emerged as promising gene carrier systems. In their non-functionalized form, lipid nanoparticles often demonstrate lower transgene expression efficiency, leading to suboptimal therapeutic outcomes, specifically through reduced percentages of cells expressing the transgene. Due to chemically active substituents, the engineering of delivery systems for genetic drugs with specific chemical ligands steps forward as an innovative strategy to tackle the drawbacks and enhance their therapeutic efficacy. Despite intense investigations into functionalization strategies, the clinical outcome of such therapies still needs to be improved. Here, we highlight and comprehensively review engineering aspects for functionalizing lipid-based delivery systems and their therapeutic efficacy for developing novel genetic cargoes to provide a full snapshot of the translation from the bench to the clinics. We outline existing challenges in the delivery and internalization processes and narrate recent advances in the functionalization of lipid-based delivery systems for nucleic acids to enhance their therapeutic efficacy and safety. Moreover, we address clinical trials using these vectors to expand their clinical use and principal safety concerns.

Stepwise PEG synthesis featuring deprotection and coupling in one pot

The stepwise synthesis of monodisperse polyethylene glycols (PEGs) and their derivatives usually involves using an acid-labile protecting group such as DMTr and coupling the two PEG moieties together under basic Williamson ether formation conditions. Using this approach, each elongation of PEG is achieved in three steps - deprotection, deprotonation and coupling - in two pots. Here, we report a more convenient approach for PEG synthesis featuring the use of a base-labile protecting group such as the phenethyl group. Using this approach, each elongation of PEG can be achieved in two steps - deprotection and coupling - in only one pot. The deprotonation step, and the isolation and purification of the intermediate product after deprotection using existing approaches are no longer needed when the one-pot approach is used. Because the stepwise PEG synthesis usually requires multiple PEG elongation cycles, the new PEG synthesis method is expected to significantly lower PEG synthesis cost.

Degradable High Molecular Weight Monodisperse Dendritic Poly(ethylene glycols)

Poly(ethylene glycols) (PEGs) are extensively explored by the pharma industry as foundations for new therapeutic products. PEGs are typically used for their conjugation to active drugs, peptides, and proteins and the likeliness to increase the half-life and enhance the therapeutic outcome. Considering the necessity of batch-to-batch consistency for clinical products, monodisperse PEGs are highly attractive but are generally limited to 5 kDa as an upper molecular weight (M_w) and with an oligomer purity of 95%. By amalgamating short, monodisperse PEGs with dendritic frameworks based on 2,2-bis(methylol)propionic acid polyesters, we showcase a robust synthetic approach to monodisperse PEGs with M_w ranging from 2 to 65 kDa. The latter is, to our knowledge, the highest M_w structure of its kind ever reported. Importantly, the dendritic multifunctional connector facilitated degradability at pH 7.4 at 37 °C, which is an important feature for the delivery of therapeutic agents.

Monodisperse and Polydisperse PEGylation of Peptides and Proteins: A Comparative Study

Although PEGylation is widely used in biomedicine with great success, it suffers from many drawbacks, such as polydispersity, nonbiodegradability, and loss of precursor potency. Recently, the search for polyethylene glycol (PEG) substitutes has attracted considerable attention. Some of the substitutes partially address the drawbacks of PEGs, but sacrifice the "stealth" effect of PEGs and bring in new issues. Herein, we developed monodisperse oligoethylene glycol (M-OEG) polyamides over 5000 Da as biodegradable and monodisperse PEGylation (M-PEGylation) agents, which provided M-PEGylated peptides and proteins with high monodispersity and a biodegradable PEG moiety. Compared to regular PEGylated proteins with a complex "stealth" cloud of PEG, the hydrogen bond interactions between the M-OEG polyamides and proteins provided the M-PEGylated protein with a biodegradable "stealth" cloak. The monodisperse and biodegradable M-PEGylation strategy as well as the peculiar protein-M-OEG polyamide interactions may shed light on many long-lasting issues during the development of PEGylated biologic drugs, such as monodispersity, biodegradability, and tunable conformation.

Synthesis of Stable Cholesteryl-Polyethylene Glycol-Peptide Conjugates with Non-Disperse Polyethylene Glycol Lengths

A method for conjugating cholesterol to peptide ligands through non-disperse polyethylene glycol (ND-PEG) through a non-hydrolysable linkage is described. The iterative addition of tetraethylene glycol macrocyclic sulfate to cholesterol (Chol) renders a family of highly pure well-defined Chol-PEG compounds with different PEG lengths from 4 up to 20 ethylene oxide units, stably linked through an ether bond. The conjugation of these Chol-PEG compounds to the cyclic (RGDfK) peptide though Lys5 side chains generates different lengths of Chol-PEG-RGD conjugates that retain the oligomer purity of the precursors, as analysis by HRMS and NMR has shown. Other derivatives were synthesized with similar results, such as Chol-PEG-OCH3 and Chol-PEG conjugated to glutathione and Tf1 peptides through maleimide-thiol chemoselective ligation. This method allows the systematic synthesis of highly pure uniform stable Chol-PEGs, circumventing the use of activation groups on each elongation step and thus reducing the number of synthesis steps.

Peptidic Monodisperse PEG "Comb" as Multifunctional "Add-On" Module for Imaging-Traceable and Thermo-Responsive Theranostics

Monodisperse polyethylene glycols-modified (M-PEGylated) biomaterials exhibit high structural accuracy, biocompatibility, and fine-tunable physicochemical properties. To develop "smart" drug delivery systems in a controllable and convenient manner, a peptidic M-PEG "comb" with fluorinated L-lysine side chains and a fluorescent N-terminal is conveniently prepared as a ¹⁹ F magnetic resonance imaging (¹⁹ F MRI) and fluorescence dual-imaging traceable and thermo-responsive "add-on" module for liposomal theranostics in cancer therapy. The peptidic M-PEG "comb" has high biocompatibility, thermo-responsivity with a sharp lower critical solution temperature, an aggregation-induced emission fluorescence, and high ¹⁹ F MRI sensitivity. As a highly branched amphiphile, it self-assembles and firmly anchors on the doxorubicin-loaded liposomal nanoparticles, which M-PEGylates the liposomes and facilitates the thermo-responsive drug release and drug tracking with dual-imaging technologies. In a rodent xenograft model of human liver cancer HepG2 cells, the M-PEGylated liposomes exhibit long in vivo half time, low toxicity, high tumor accumulation, "hot spot" ¹⁹ F MRI, and therapeutic efficacy. With accurately programmable chemical structure, fine-tunable physicochemical and biological properties to meet the demands of diagnosis, drug delivery, and therapy, the M-PEG "comb" is promising as a versatile "add-on" module for rapid and convenient formulation of various "smart" theranostics.

Sequence-defined l-glutamamide oligomers with pendant supramolecular motifs via iterative synthesis and orthogonal post-functionalization

One of the great challenges in polymer chemistry is to achieve discrete and sequence-defined synthetic polymers that fold in defined conformations and form well-defined three-dimensional structured particles.

Monodisperse polyethylene glycol "brushes" with enhanced lipophilicity, and thermo and plasma stability

A convenient strategy was developed for highly branched and multifunctionalized peptidic monodisperse polyethylene glycol "brushes", which exhibit remarkable physicochemical and biological properties and potential as versatile biomaterials.

Monodisperse oligoethylene glycols modified Camptothecin, 10-Hydroxycamptothecin and SN38 prodrugs

Camptothecin, which represents a class of natural products with high anticancer activity, suffers low water solubility which hampers its clinic application. To address this issue, monodisperse polyethylene glycols were employed to modify this class of natural products, including Camptothecin, 10-Hydroxycamptothecin, and SN38. Through selective modification with a series of monodisperse polyethylene glycols, 31 Camptothecin derivatives, including 9 ethers and 22 carbonates, were prepared using a macrocyclic sulfate-based strategy with high efficacy. Monodisperse polyethylene glycols modification provided the Camptothecin derivatives with high purity and fine-tunable water solubility. Through the physicochemical and biological assays, a few novel prodrugs with good solubility, cytotoxicity, and valuable drug release profile were identified as promising anticancer drug candidates.

One-pot synthesis of monodisperse dual-functionalized polyethylene glycols through macrocyclic sulfates

Dual-functionalization of monodisperse oligoethylene glycols, especially hetero-functionalization, provides a series of highly valuable intermediates for life and materials sciences. However, the existing methods for the preparation of these compounds suffer excessive protecting and activating group manipulation as well as tedious purification. Here, a one-pot dual-substitution strategy with macrocyclic sulfates of polyethylene glycols as the key intermediates was developed for the convenient and scalable preparation of a series of homo-functionalized and hetero-functionalized oligoethylene glycols in just 1 step. A high synthetic efficacy was achieved by avoiding the protecting and activating group manipulation and the intermediate purification.

Design, Synthesis, and Biological Evaluation of Bivalent Ligands Targeting Dopamine D2 -Like Receptors and the μ-Opioid Receptor

Currently, there is mounting evidence that intermolecular receptor-receptor interactions may result in altered receptor recognition, pharmacology and signaling. Heterobivalent ligands have been proven useful as molecular probes for confirming and targeting heteromeric receptors. This report describes the design and synthesis of novel heterobivalent ligands for dopamine D₂ -like receptors (D₂ -likeR) and the μ-opioid receptor (μOR) and their evaluation using ligand binding and functional assays. Interestingly, we identified a potent bivalent ligand that contains a short 18-atom linker and combines good potency with high efficacy both in β-arrestin 2 recruitment for μOR and MAPK-P for D₄ R. Furthermore, this compound was characterized by a biphasic competition binding curve for the D₄ R-μOR heterodimer, indicative of a bivalent binding mode. As this compound possibly bridges the D₄ R-μOR heterodimer, it could be used as a pharmacological tool to further investigate the interactions of D₄ R and μOR.

Solid Phase Stepwise Synthesis of Polyethylene Glycols

Polyethylene glycol (PEG) and derivatives with eight and twelve ethylene glycol units were synthesized by stepwise addition of tetraethylene glycol monomers on a polystyrene solid support. The monomer contains a tosyl group at one end and a dimethoxytrityl group at the other. The Wang resin, which contains the 4-benzyloxy benzyl alcohol function, was used as the support. The synthetic cycle consists of deprotonation, Williamson ether formation (coupling), and detritylation. Cleavage of PEGs from solid support was achieved with trifluoroacetic acid. The synthesis including monomer synthesis was entirely chromatography-free. PEG products including those with different functionalities at the two termini were obtained in high yields. The products were analyzed with ESI and MALDI-TOF MS and were found close to monodispersity.