RAFT Dispersion PISA with Poly(methyl methacrylate) as Stabilizer Block in Alcohol/Water: Unconventional PISA Morphology Transitions

Reversible addition-fragmentation chain transfer (RAFT) dispersion polymerization-induced self-assembly (PISA) was conducted in the presence of poly(methyl methacrylate) (PMMA) stabilizer in ethanol/water mixture (80/20 by volume). Two different systems were explored by utilizing (i) 2-ethylhexyl methacrylate (EHMA) and (ii) n-butyl methacrylate (BMA). The morphology transitions of these systems were investigated by varying the polymerization conditions, i.e., the presence of the solvophilic comonomer MMA, the solids content, and the target degree of polymerization (DP). As observed in conventional PISA, the presence of solvophilic comonomer, increase in solids content and target DP promoted the formation of high-order morphology. However, unusual morphology transitions were observed whereby the morphology transformed from high-order morphologies to a mixture of spherical nanoparticles, worms, and vesicles and finally to vesicles with increasing target DP. This unusual evolution may be attributed to the limited solubility of PMMA in the ethanol/water solvent mixture, whereby PMMA is soluble at the polymerization temperature but insoluble at lower temperatures.

Recent Advances in Polymerization-Induced Self-Assembly (PISA) Syntheses in Non-Polar Media

It is well-known that polymerization-induced self-assembly (PISA) is a powerful and highly versatile technique for the rational synthesis of colloidal dispersions of diblock copolymer nanoparticles, including spheres, worms or vesicles. PISA can be conducted in water, polar solvents or non-polar media. In principle, the latter formulations offer a wide range of potential commercial applications. However, there has been just one review focused on PISA syntheses in non-polar media and this prior article was published in 2016. The purpose of the current review article is to summarize the various advances that have been reported since then. In particular, PISA syntheses conducted using reversible addition-fragmentation chain-transfer (RAFT) polymerization in various n-alkanes, poly(α-olefins), mineral oil, low-viscosity silicone oils or supercritical CO2 are discussed in detail. Selected formulations exhibit thermally induced worm-to-sphere or vesicle-to-worm morphological transitions and the rheological properties of various examples of worm gels in non-polar media are summarized. Finally, visible absorption spectroscopy and small-angle X-ray scattering (SAXS) enable in situ monitoring of nanoparticle formation, while small-angle neutron scattering (SANS) can be used to examine micelle fusion/fission and chain exchange mechanisms.

RAFT aqueous dispersion polymerization of 4-hydroxybutyl acrylate: effect of end-group ionization on the formation and colloidal stability of sterically-stabilized diblock copolymer nanoparticles

Poly(2-hydroxyethyl acrylate)-poly(4-hydroxybutyl acrylate) nano-objects are prepared by aqueous polymerization-induced self-assembly (PISA) using an ionic RAFT agent.

Polymerization-Induced Hierarchical Self-Assembly: From Monomer to Complex Colloidal Molecules and Beyond

The nanoscale hierarchical design that draws inspiration from nature's biomaterials allows the enhancement of material performance and enables multifarious applications. Self-assembly of block copolymers represents one of these artificial techniques that provide an elegant bottom-up strategy for the synthesis of soft colloidal hierarchies. Fast-growing polymerization-induced self-assembly (PISA) renders a one-step process for the polymer synthesis and in situ self-assembly at high concentrations. Nevertheless, it is exceedingly challenging for the fabrication of hierarchical colloids via aqueous PISA, simply because most monomers produce kinetically trapped spheres except for a few PISA-suitable monomers. We demonstrate here a sequential one-pot synthesis of hierarchically self-assembled polymer colloids with diverse morphologies via aqueous PISA that overcomes the limitation. Complex formation of water-immiscible monomers with cyclodextrin via "host-guest" inclusion, followed by sequential aqueous polymerization, provides a linear triblock terpolymer that can in situ self-assemble into hierarchical nanostructures. To access polymer colloids with different morphologies, three types of linear triblock terpolymers were synthesized through this methodology, which allows the preparation of AX_n-type colloidal molecules (CMs), core-shell-corona micelles, and raspberry-like nanoparticles. Furthermore, the phase separations between polymer blocks in nanostructures were revealed by transmission electron microscopy and atomic force microscopy-infrared spectroscopy. The proposed mechanism explained how the interfacial tensions and glass transition temperatures of the core-forming blocks affect the morphologies. Overall, this study provides a scalable method of the production of CMs and other hierarchical structures. It can be applied to different block copolymer formulations to enrich the complexity of morphology and enable diverse functions of nano-objects.

Elucidating preparation-structure relationships for the morphology evolution during the RAFT dispersion polymerization of N-acryloyl thiomorpholine

Depending on the conditions, nearly monodisperse spherical micelles or complex morphologies are formed during a polymerization induced self-assembly (PISA) process based on the water-soluble monomer N-acryloylthiomorpholine.

Synthesis of ABA triblock copolymer nanoparticles by polymerization induced self-assembly and their application as an efficient emulsifier

ABA triblock copolymer nanoparticles of PHPMA-b-PS-b-PHPMA were synthesized by PISA and demonstrated to be an efficient emulsifier.

Towards nanoparticles with site-specific degradability by ring-opening copolymerization induced self-assembly in organic medium

Radical ring-opening copolymerization-induced self-assembly (rROPISA) was successfully applied to the synthesis of core-, surface- or surface plus core-degradable nanoparticles in heptane, leading to site-specific degradability by rROPISA.

Forced gradient copolymerisation: a simplified approach for polymerisation-induced self-assembly

In this work, a novel and versatile gradient copolymerisation approach to simplify polymeric nanoparticle synthesis through polymerisation-induced self-assembly (PISA) is reported.

Thermoresponsive dynamic BAB block copolymer networks synthesized by aqueous PISA in one-pot

The incorporation of neutral hydrophilic monomer units in the hydrophobic B blocks of BAB copolymers produces transient networks exhibiting a thermoresponsive behavior with a maximum of viscosity in water.

TMEM16A-inhibitor loaded pH-responsive nanoparticles: A novel dual-targeting antitumor therapy for lung adenocarcinoma

To overcome the adverse effects of conventional chemotherapy for cancers, various nanoparticles based drug delivery systems have been developed. However, nanoparticles delivering drugs directly to kill tumor cells still faced with challenges, because tumors possessed adopt complex mechanism to resist damages, which compromised the therapeutic efficacy. TMEM16A/CaCCs (Calcium activates chloride channels) has been identified to be overexpressed in lung adenocarcinoma which can serve as a novel tumor specific drug target in our previous work. Here, we developed a novel dual-targeted antitumor strategy via designing a novel nano-assembled, pH-sensitive drug-delivery system loading with specific inhibitors of TMEM16A against lung adenocarcinoma. For validation, we assayed the novel dual-targeting therapy on xenograft mouse model which exhibited significant antitumor activity and not affect mouse body weight. The dual targeting therapy accomplished in this study will shed light on the development of advanced antitumor strategy.

In Situ Controlled Construction of a Hierarchical Supramolecular Chiral Liquid-Crystalline Polymer Assembly

Hierarchical supramolecular chiral liquid-crystalline (LC) polymer assemblies are challenging to construct in situ in a controlled manner. Now, polymerization-induced chiral self-assembly (PICSA) is reported. Hierarchical supramolecular chiral azobenzene-containing block copolymer (Azo-BCP) assemblies were constructed with π-π stacking interactions occurring in the layered structure of Azo smectic phases. The evolution of chirality from terminal alkyl chain to Azo mesogen building blocks and further induction of supramolecular chirality in LC BCP assemblies during PICSA is achieved. Morphologies such as spheres, worms, helical fibers, lamellae, and vesicles were observed. The morphological transition had a crucial effect on the chiral expression of Azo-BCP assemblies. The supramolecular chirality of Azo-BCP assemblies destroyed by 365 nm UV irradiation can be recovered by heating-cooling treatment; this dynamic reversible achiral-chiral switching can be repeated at least five times.

Polymerization techniques in polymerization-induced self-assembly (PISA)

The development of controlled/“living” polymerization greatly stimulated the prosperity of the fabrication and application of block copolymer nano-objects.

Synthesis of block copolymer nano-assemblies via ICAR ATRP and RAFT dispersion polymerization: how ATRP and RAFT lead to differences

Block copolymer nano-assemblies were synthesized via ICAR ATRP dispersion polymerization employing the CuBr₂/tris(2-pyridylmethyl)amine catalyst in an alcoholic solvent at a relatively low temperature of 45 °C.

Synthesis of Light-Responsive Pyrene-Based Polymer Nanoparticles via Polymerization-Induced Self-Assembly

The use of an in situ, one-pot polymerization-induced self-assembly method to synthesize light-responsive pyrene-containing nanoparticles is reported. The strategy is based on the chain extension of a hydrophilic macromolecular chain transfer agent, poly(oligo(ethylene glycol) methyl ether methacrylate), using a light-responsive monomer, 1-pyrenemethyl methacrylate (PyMA), via a reversible addition-fragmentation chain transfer dispersion polymerization; yielding nanoparticles of various morphologies (spherical micelles and worm-like micelles). In this process, addition of comonomers, such as butyl methacrylate (BuMA) or methyl methacrylate (MMA), are required to obtain high PyMA monomer conversion (>80% in 24 h). The addition of comonomers reduces the π-π stacking of the pyrene moieties, which facilitates the diffusion of monomers in the nanoparticle core. The addition of BuMA (as a comonomer) offers P(PyMA-co-BuMA) core-forming chains with high mobility that enables the reorganization of chains and then the evolution of morphology to form vesicles. In contrast, when MMA comonomer is used, kinetically trapped spheres are obtained; this is due to the low mobility of the core-forming chains inhibiting in situ morphological evolution. Finally, the UV-light-induced dissociation of these light-responsive nanoparticles due to the gradual cleavage of the pyrene moieties and the subsequent hydrophobic-to-hydrophilic transitions of the core-forming blocks is demonstrated.

New Insights into RAFT Dispersion Polymerization-Induced Self-Assembly: From Monomer Library, Morphological Control, and Stability to Driving Forces

Polymerization-induced self-assembly (PISA) has been established as an efficient, robust, and versatile approach to synthesize various block copolymer nano-objects with controlled morphologies, tunable dimensions, and diverse functions. The relatively high concentration and potential scalability makes it a promising technique for industrial production and practical applications of functional polymeric nanoparticles. This feature article outlines recent advances in PISA via reversible addition-fragmentation chain transfer dispersion polymerization. Considerable efforts to understand morphological control, broaden the monomer library, enhance morphological stability, and incorporate multiple driving forces in PISA syntheses are summarized herein. Finally, perspectives on the future of PISA research are discussed.

Responsive crosslinked polymer nanogels for imaging and therapeutics delivery

Nanogels are water-soluble crosslinked polymer networks with tremendous potential in targeted imaging and controlled drug and gene delivery.

The secondary structures of PEG-functionalized random copolymers derived from (R)- and (S)- families of alkyne polycarbodiimides

Macromolecular micelles: a hydrophobic polyamidine backbone surrounded by hydrophilic PEG chains.

Synthesis of poly(ionic liquid)-based nano-objects with morphological transitionsviaRAFT polymerization-induced self-assembly in ethanol

A full range of morphologies including spheres, worms and vesicles was observed in poly(ionic liquid)-based block copolymer nano-objectsviaethanolic dispersion polymerization.

Topological engineering of amphiphilic copolymers via RAFT dispersion copolymerization of benzyl methacrylate and 2-(perfluorooctyl)ethyl methacrylate for polymeric assemblies with tunable nanostructures

RAFT dispersion copolymerization of benzyl methacrylate and 2-(perfluorooctyl)ethyl methacrylate enables the regulation of the nanostructure of polymer assemblies.

In situ synthesis of diblock copolymer nano-assemblies via dispersion RAFT polymerization induced self-assembly and Ag/copolymer composite nanoparticles thereof

Lacunal nanospheres were obtained through the dispersion of styrene in an ethanol/water mixture mediated by PAA-CTA, while pure vesicles were obtained for PAA-b-P(AA-r-St) block assemblies under similar conditions.

In situ synthesis of PAA-b-PSt nano-assemblies via dispersion RAFT polymerization: effects of PEG in the medium

A facile and efficient approach was proposed to adjust BCP assemblies in PISA by introduction of PEG in the medium. Both PEG amount and molecular weight have significant effects on PAA-b-PSt micelles.

Cationic disulfide-functionalized worm gels

The recent development of polymerization-induced self-assembly (PISA) has facilitated the rational synthesis of a range of diblock copolymer worms, which hitherto could only be prepared via traditional post-polymerization processing in dilute solution. Herein we explore a new synthetic route to aqueous dispersions of cationic disulfide-functionalized worm gels. This is achieved via the PISA synthesis of poly[(glycerol monomethacrylate-stat-glycidyl methacrylate)]-block-poly(2-hydroxypropyl methacrylate) (P(GMA-stat-GlyMA)-PHPMA) block copolymer worms via reversible addition-fragmentation chain transfer (RAFT) aqueous dispersion polymerization of HPMA. A water-soluble reagent, cystamine, is then reacted with the pendent epoxy groups located within the P(GMA-stat-GlyMA) stabilizer chains to introduce disulfide functionality, while simultaneously conferring cationic character via formation of secondary amine groups. Moreover, systematic variation of the cystamine/epoxy molar ratio enables either chemically cross-linked worm gels or physical (linear) primary amine-functionalized disulfide-based worm gels to be obtained. These new worm gels were characterized using gel permeation chromatography, 1H NMR spectroscopy, transmission electron microscopy, dynamic light scattering, aqueous electrophoresis and rheology. In principle, such hydrogels may offer enhanced mucoadhesive properties.

In situ synthesis of the Ag/poly(4-vinylpyridine)-block-polystyrene composite nanoparticles by dispersion RAFT polymerization

A new method for the synthesis of metal/block-copolymer nanocomposites of poly(4-vinylpyridine)-b-polystyrene (P4VP-b-PS) and Ag nanoparticles by dispersion RAFT polymerization is proposed.

In situ synthesis of a self-assembled AB/B blend of poly(ethylene glycol)-b-polystyrene/polystyrene by dispersion RAFT polymerization

A diblock-copolymer/homopolymer self-assembled blend was synthesized through dispersion RAFT polymerization, and its morphology changed with a decreasing ratio of diblock-copolymer/homopolymer.

Synthesis of diblock copolymer nano-assemblies by PISA under dispersion polymerization: comparison between ATRP and RAFT

PHPMA-b-PBzMA diblock copolymer nano-assemblies were synthesized by ATRP dispersion polymerization and were compared with those obtained by RAFT dispersion polymerization.

The in situ formation of nanoparticles via RAFT polymerization-induced self-assembly in a continuous tubular reactor

Amphiphilic poly(poly(ethylene glycol)methyl ether methacrylate)-b-poly(methyl methacrylate) (PPEGMA-b-PMMA) diblock copolymer nanoparticles were successfully synthesized via polymerization-induced self-assembly (PISA) at 70 °C in a continuous tubular reactor.

In situ synthesis of thermoresponsive 4-arm star block copolymer nano-assemblies by dispersion RAFT polymerization

Thermoresponsive 4-arm star block copolymer nano-assemblies were synthesized, and their interesting thermoresponse was investigated.