Morphology and thermal transitions of self-assembled NIPAM-DMA copolymers in aqueous media depend on copolymer composition profile

HYPOTHESIS

There is a lack of understanding of the interplay between the copolymer composition profile and thermal transition observed in aqueous solutions of N-isopropyl acrylamide (NIPAM) copolymers, as well as the correlation between this transition and the formation and structure of copolymer self-assemblies.

EXPERIMENTS

For this purpose, we investigated the response of five copolymers with the same molar mass and chemical composition, but with different composition profile in aqueous solution against temperature. Using complementary analytical techniques, we probed structural properties at different length scales, from the molecular scale with Nuclear Magnetic Resonance (NMR) to the colloidal scale with Dynamic Light Scattering (DLS) and Small Angle Neutron Scattering (SANS).

FINDINGS

NMR and SANS investigations strengthen each other and allow a clear picture of the change of copolymer solubility and related copolymer self-assembly as a function of temperature. At the molecular scale, dehydrating NIPAM units drag N,N-dimethyl acrylamide (DMA) moieties with them in a gradual collapse of the copolymer chain; this induces a morphological transition of the self-assemblies from star-like nanostructures to crew-cut micelles. Interestingly, the transition spans a temperature range which depends on the monomer distribution profile in the copolymer chain, with the asymmetric triblock copolymer specimen revealing the broadest one. We show that the broad morphological transitions associated with gradient copolymers can be mimicked and even surpassed by the use of stepwise gradient (asymmetric) copolymers, which can be more easily and reproducibly synthesized than linear gradient copolymers.

Folic-Acid-Conjugated Thermoresponsive Polymeric Particles for Targeted Delivery of 5-Fluorouracil to CRC Cells

Colorectal cancer is the fourth most common cancer worldwide and the third most frequently diagnosed form of cancer associated with high mortality rates. Recently, targeted drug delivery systems have been under increasing attention owing to advantages such as high therapeutic effectiveness with a significant depletion in adverse events. In this report, we describe the biocompatible and thermoresponsive FA-conjugated PHEA-b-PNIPAAm copolymers as nanocarriers for the delivery of 5-FU. The block copolymers were obtained using RAFT (Reversible Addition-Fragmentation chain Transfer) polymerization and were characterized by methods such as SEC (Size Exclusion Chromatography), NMR (Nuclear Magnetic Resonance), UV-Vis (Ultraviolet-Visible), FT-IR (Fourier Transform Infrared) spectroscopy, and TGA (Thermogravimetric Analysis). Nanoparticles were formed from polymers with and without the drug-5-fluorouracil, which was confirmed using DLS (Dynamic Light Scattering), zeta potential measurements, and TEM (Transmission Electron Microscopy) imaging. The cloud points of the polymers were found to be close to the temperature of the human body. Eventually, polymeric carriers were tested as drug delivery systems for the safety, compatibility, and targeting of colorectal cancer cells (CRC). The biological evaluation indicated high compatibility with the representative host cells. Furthermore, it showed that proposed nanosystems might have therapeutic potential as mitigators for 5-FU-induced monocytopenia, cardiotoxicity, and other chemotherapy-associated disorders. Moreover, results show increased cytotoxicity against cancer cells compared to the drug, including a line with a drug resistance phenotype. Additionally, the ability of synthesized carriers to induce apoptosis and necrosis in treated CRC cells has been confirmed. Undoubtedly, the presented aspects of colorectal cancer therapy promise future solutions to overcome the conventional limitations of current treatment regimens for this type of cancer and to improve the quality of life of the patients.

RAFT polymerisation of N-vinylformamide and the corresponding double hydrophilic block copolymers

Polyvinylamine-based double hydrophilic block copolymers are synthesised from RAFT polymerisation of N-vinylformamide.

Controlling properties of thermogels by tuning critical solution behaviour of ternary copolymers

Thermogelling tri-block terpolymers were made from a bifunctional PEG RAFT agent. The critical solution behavior was tunable by alteration of the terpolymer composition, enabling modulation of gelation temperatures and hydrogel viscoelasticity.

Achieving Ultrahigh Molecular Weights with Diverse Architectures for Unconjugated Monomers through Oxygen-Tolerant Photoenzymatic RAFT Polymerization

Achieving well-defined polymers with ultrahigh molecular weight (UHMW) is an enduring pursuit in the field of reversible deactivation radical polymerization. Synthetic protocols have been successfully developed to achieve UHMWs with low dispersities exclusively from conjugated monomers while no polymerization of unconjugated monomers has provided the same level of control. Herein, an oxygen-tolerant photoenzymatic RAFT (reversible addition-fragmentation chain transfer) polymerization was exploited to tackle this challenge for unconjugated monomers at 10 °C, enabling facile synthesis of well-defined, linear and star polymers with near-quantitative conversions, unprecedented UHMWs and low dispersities. The exquisite level of control over composition, MW and architecture, coupled with operational ease, mild conditions and environmental friendliness, broadens the monomer scope to include unconjugated monomers, and to achieve previously inaccessible low-dispersity UHMWs.

Evaluation of Cytotoxic Effect of Cholesterol End-Capped Poly(N-Isopropylacrylamide)s on Selected Normal and Neoplastic Cells

Purpose

Efficient intracellular delivery of a therapeutic compound is an important feature of smart drug delivery systems (SDDS). Modification of a carrier structure with a cell-penetrating ligand, ie, cholesterol moiety, is a strategy to improve cellular uptake. Cholesterol end-capped poly(N-isopropylacrylamide)s offer a promising foundation for the design of efficient thermoresponsive drug delivery systems.

Methods

A series of cholesterol end-capped poly(N-isopropylacrylamide)s (PNIPAAm) with number-average molar masses ranging from 3200 to 11000 g·mol^–1 were synthesized by reversible addition-fragmentation chain transfer (RAFT) polymerization from original xanthate-functionalized cholesterol and self-assembled into micelles. The physicochemical characteristics and cytotoxicity of cholesterol end-capped poly(N-isopropylacrylamide)s have been thoroughly investigated.

Results

Phase transition temperature dependence on the molecular weight and hydrophilic/hydrophobic ratio in the polymers were observed in water. Biological test results showed that the obtained materials, both in disordered and micellar form, are non-hemolytic, highly compatible with fibroblasts, and toxic to glioblastoma cells. It was found that the polymer termini dictates the mode of action of the system.

Conclusion

The cholesteryl moiety acts as a cell-penetrating agent, which enables disruption of the plasma membrane and in effect leads to the restriction of the tumor growth. Cholesterol end-capped PNIPAAm showing in vitro anticancer efficacy can be developed not only as drug carriers but also as components of combined/synergistic therapy.

100th Anniversary of Macromolecular Science Viewpoint: Achieving Ultrahigh Molecular Weights with Reversible Deactivation Radical Polymerization

Synthetic strategies for achieving ultrahigh molecular weights via reversible deactivation radical polymerization are discussed from the mechanistic, kinetic, and experimental aspects, and their applications as high-performance materials are highlighted. Further development of this field requires continuous effort to improve livingness and polymerization efficiency under greener conditions.

Enhanced Flocculation Efficiency in a High-Ionic-Strength Environment by the Aid of Anionic ABA Triblock Copolymers

The flocculation efficiency of polyelectrolytes in a high-ionic-strength environment is often affected and reduced due to shielding of the active ionizable functional groups, as well as changes in the surface chemistry of the solid slurry. To address this problem, a series of well-defined novel ABA triblock copolymers were employed for the flocculation of high-ionic-strength kaolin slurries at three different Ca²⁺ concentrations (0.05, 0.10, and 0.50 M). The primary focus was on the advancement in the polymer architecture, where the anionic functionalities were localized at the terminal ends. Typical commercial flocculants tend to have anionic functionalities randomly distributed throughout the polymer chain and hence a higher propensity toward condensed conformation and formation of insoluble species. In comparison to a control random copolymer, the ABA triblock copolymers were able to flocculate kaolin slurries to give faster settlement rates, particularly at the high Ca²⁺ concentrations of 0.10 and 0.50 M. In addition, these polymers had significantly better clarification ability at higher Ca²⁺ concentrations compared to the control random copolymer. The ABA triblock copolymer architecture may therefore have potential as a flocculant in high-ionic-strength applications.

Polymer Networks: From Plastics and Gels to Porous Frameworks

Polymer networks, which are materials composed of many smaller components-referred to as "junctions" and "strands"-connected together via covalent or non-covalent/supramolecular interactions, are arguably the most versatile, widely studied, broadly used, and important materials known. From the first commercial polymers through the plastics revolution of the 20^th century to today, there are almost no aspects of modern life that are not impacted by polymer networks. Nevertheless, there are still many challenges that must be addressed to enable a complete understanding of these materials and facilitate their development for emerging applications ranging from sustainability and energy harvesting/storage to tissue engineering and additive manufacturing. Here, we provide a unifying overview of the fundamentals of polymer network synthesis, structure, and properties, tying together recent trends in the field that are not always associated with classical polymer networks, such as the advent of crystalline "framework" materials. We also highlight recent advances in using molecular design and control of topology to showcase how a deep understanding of structure-property relationships can lead to advanced networks with exceptional properties.

Investigations into CTA-differentiation-involving polymerization of fluorous monomers: exploitation of experimental variances in fine-tuning of molecular weights

Condition and substrate effects on CTA-differentiation-involving polymerization were explored for logical control of molecular weight.

Precise Synthesis of Ultra-High-Molecular-Weight Fluoropolymers Enabled by Chain-Transfer-Agent Differentiation under Visible-Light Irradiation

Ultra-high-molecular-weight (UHMW) polymers display outstanding properties and hold potential for wide applications. However, their precise synthesis remains challenging. Herein, we developed a novel reversible-deactivation radical polymerization based on the strong and selective fluorine-fluorine interaction, allowing chain-transfer agents to spontaneously differentiate into two groups that take charge of the chain growth and reversible deactivation of the growing chains, respectively. This method enables dramatically improved livingness of propagation, providing UHMW polymers with a surprisingly narrow molecular weight distribution (Đ≈1.1) from a variety of fluorinated (meth)acrylates and acrylamide at quantitative conversions under visible-light irradiation. In situ chain-end extensions from UHMW polymers facilitated the synthesis of well-defined block copolymers, revealing the excellent chain-end fidelity achieved by this method.

Thermoresponsive hydrogels formed by poly(2-oxazoline) triblock copolymers

Hydrogels are useful materials for drug delivery and tissue engineering. Here, we report the importance of controlling block lengths for making thermoresponsive hydrogels based on ABA triblock copolymers with thermoresponsive outer blocks.

The downside of dispersity: why the standard deviation is a better measure of dispersion in precision polymerization

Dispersity gives a deceptively rosy picture of the extent of dispersion in molecular weight distributions. For complex structures or relatively narrow molecular weight distributions, the standard deviation of the number distribution is a better choice.

Industrial development of reversible-deactivation radical polymerization: is the induction period over?

The commercial applications of polymers produced by reversible-deactivation radical polymerization are reviewed here.

Thermosensitive spontaneous gradient copolymers with block- and gradient-like features

Amphiphilic gradient copolymers with thermoresponsive properties were synthesized in one pot via RAFT copolymerization.

Synthesis of ultra-high molecular weight ABA triblock copolymers via aqueous RAFT-mediated gel polymerisation, end group modification and chain coupling

Novel ultra-high molecular weight ABA triblock copolymers were synthesised using aqueous RAFT polymerisation, end-group modification and chain coupling.