Diblock dialternating terpolymers by one-step/one-pot highly selective organocatalytic multimonomer polymerization

The synthesis of well-defined block copolymers from a mixture of monomers without additional actions ("one-pot/one-step") is an ideal and industrially valuable method. In addition, the presence of controlled alternating sequences in one or both blocks increases the structural diversity of polymeric materials, but, at the same time, the synthetic difficulty. Here we show that the "one-pot/one-step" ring-opening terpolymerization of a mixture of three monomers (N-sulfonyl aziridines; cyclic anhydrides and epoxides), with tert-butylimino-tris(dimethylamino)phosphorene (t-BuP1) as a catalyst, results in perfect diblock dialternating terpolymers having a sharp junction between the two blocks, with highly-controllable molecular weights and narrow molecular weight distributions (Ð < 1.08). The organocatalyst switches between two distinct polymerization cycles without any external stimulus, showing high monomer selectivity and kinetic control. The proposed mechanism is based on NMR, in-situ FTIR, SEC, MALDI-ToF, reactivity ratios, and kinetics studies.

Amphiphilic diblock copolymers of poly(glycidol) with biodegradable polyester/polycarbonate. organocatalytic one-pot ROP and self-assembling property

Poly(glycidol)-based block copolymers with excellent micelle formation properties were prepared via organocatalytic one-pot ROP.

Merging of cationic RAFT and radical RAFT polymerizations with ring-opening polymerizations for the synthesis of asymmetric ABCD type tetrablock copolymers in one pot

A new bifunctional and switchable RAFT agent and a mechanism switching strategy were proposed to control the cationic RAFT polymerization, radical RAFT polymerization and ring-opening polymerization of vinyl and cyclic ester monomers and to produce block copolymers.

Strategies for the synthesis of block copolymers with biodegradable polyester segments

Oxygenated block copolymers with biodegradable polyester segments can be prepared in one-pot through sequential or simultaneous addition of monomers. This review highlights the state of the art in this area.

Organocatalytic sequential ring-opening polymerization of cyclic ester/epoxide and N-sulfonyl aziridine: metal-free and easy access to block copolymers

Sequential ring-opening polymerization of ε-caprolactone (ε-CL)/propylene oxide (PO) and N-sulfonyl aziridine switched by tosyl isocyanate (TSI) allows the metal-free synthesis of polysulfonamide-based copolymers.

Poly(trimethylene carbonate-co-valerolactone) copolymers are materials with tailorable properties: from soft to thermoplastic elastomers

Aliphatic poly(ester-carbonates) are receiving extensive research attention as tailorable materials suitable for multiple applications from tissue engineering and 3D scaffold printing to drug delivery. Thus, simple reliable procedures for producing easily tailorable poly(ester-carbonates) without metal residues are continuously sought after. In this work, we report on one-pot synthesis of random copolymers of TMC and δ-VL using metal-free biocompatible 1,5,7-triazabicyclo[4.4.0]dec-5-ene as a catalyst and benzyl alcohol and poly(ethylene oxide) as initiators. Random poly(ester-carbonates) with TMC : VL unit ratios ranging from 80 : 20 to 20 : 80 were synthesized via ring-opening polymerization while displaying excellent agreement of comonomers' ratios in the feed and copolymer chains. The copolymers' supramolecular structure, thermal and mechanical properties were thoroughly analyzed by various methods. The obtained results clearly indicated that the physicochemical properties can be controlled simply by varying the ratio of comonomers and the length of segments in the copolymer chain. Several copolymers exhibited behavior of thermoplastic elastomers with the most promising one exhibiting a 2200% increase in elongation at break compared to the poly(valerolactone) homopolymer while retaining tensile strength and Young's modulus suitable for biomedical applications. Overall, our work contributed to widening the portfolio of tailorable copolymers for specialized bioapplications and possibly paving a way for the use of more sustainable polymers in the biomedical field.

Tunable hydantoin and base binary organocatalysts in ring-opening polymerizations

A (thio)hydantoin (HHyd) was deprotonated by a Brønsted base (B) to afford iminolate Hyd1 or Hyd3 that activated polymer chain-end (P), the conjugate acid (B–H+) activated monomer (M).

Organocatalyzed ring-opening copolymerization of α-bromo-γ-butyrolactone with ε-caprolactone for the synthesis of functional aliphatic polyesters - pre-polymers for graft copolymerization

Diphenyl phosphate (DPP) was exploited as an organocatalyst to synthesize copolymers by ring-opening polymerization with α-bromo-γ-butyrolactone (αBrγBL) and ε-caprolactone (εCL) as monomers and polyethylene glycol (PEG) as initiator. The conversion rates of monomers and molecular weights of copolymers synthesized under different conditions were determined by ¹H-NMR. The ¹H-NMR results showed that the copolymers of αBrγBL and εCL initiated by PEG (PEGCB) were successfully synthesized and the conversions of εCL were relatively high (＞70%), while the conversions of αBrγBL were relatively low (＜26%). The highest molar ratio of αBrγBL to εCL units in these copolymers is 0.17, when the copolymerization was carried out at 100℃ for 17h.

The bromine atoms hanged on the chain of the copolymers PEGCB provide a good opportunity to construct graft copolymers via atom transfer radical polymerization (ATRP). The subsequent grafting of 2-(dimethylamino)ethyl methacrylate (DMAEMA) was conducted by using PEGCB3 as macroinitiator, CuBr/N,N’,N’,N”,N”- pentamethyldiethylenetriamine (PMDETA) as catalysts and toluene/anisole as solvents via ATRP. According to the analysis of ¹H-NMR, the grafting efficiency, grafting ratio and grafting frequency were 22.4%, 160.7% and 1133.8, respectively.

Exploring Strategies To Bias Sequence in Natural and Synthetic Oligomers and Polymers

Millions of years of biological evolution have driven the development of highly sophisticated molecular machinery found within living systems. These systems produce polymers such as proteins and nucleic acids with incredible fidelity and function. In nature, the precise molecular sequence is the factor that determines the function of these macromolecules. Given that the ability to precisely define sequence emerges naturally, the fact that biology achieves unprecedented control over the unit sequence of the monomers through evolved enzymatic catalysis is incredible. Indeed, the ability to engineer systems that allow polymer synthesis with precise sequence control is a feat that technology is yet to replicate in artificial synthetic systems. This is the case because, without access to evolutionary control for finely tuned biological catalysts, the inability to correct errors or harness multiple competing processes means that the prospects for digital control of polymerization have been firmly bootstrapped to biological systems or limited to stepwise synthetic protocols. In this Account, we give an overview of strategies that have been used over the last 5 years in efforts to program polymer synthesis with sequence control in the laboratory. We also briefly explore how the use of robotics, algorithms, and stochastic chemical processes might lead to new understanding, mechanisms, and strategies to achieve full digital control. The aim is to see whether it is possible to go beyond bootstrapping to biological polymers or stepwise chemical synthesis. We start by describing nonenzymatic techniques used to obtain sequence-controlled natural polymers, a field that lends itself to direct application of insights gleaned from biology. We discuss major advances, such as the use of rotaxane-based molecular machines and templated approaches, including the utilization of biological polymers as templates for purely synthetic chains. We then discuss synthetic polymer chemistry, whose array of techniques allows the production of polymers with enormous structural and functional diversity, but so far with only limited control over the unit sequence itself. Synthetic polymers can be subdivided into multiple classes depending on the nature of processes used to synthesize them, such as by addition or condensation. Consequently, varied approaches for sequence control have been demonstrated in the area, including but not limited to click reactions, iterative solid-phase chemistry, and exploiting the chemical affinity of the monomers themselves. In addition to those, we highlight the importance of environmental bias in possible control of polymerization at the single-unit level, such as using catalyst switching or external stimuli. Even the most successful experimental sequence control approach needs appropriate tools to verify its scope and validity; therefore, we devote part of the present Account to possible analytical approaches to sequence readout, starting with well-established tandem mass spectrometry techniques and touching on those more applicable to specific classes of processes, such as diffusion-ordered NMR spectroscopy. Finally, we discuss progress in modeling and automation of sequence-controlled polymers. We postulate that developments in analytical chemistry, bioinformatics, and computer modeling will lead to new ways of exploring the development of new strategies for the realization of sequence control by means of sequence bias. This is the case because treating the assembly of polymers as a network of chemical reactions will enable the development of control strategies that can bias the outcome of the polymer assembly. The grand aim would be the synthesis of complex polymers in one step with a precisely defined digital sequence.

A switch from anionic to bifunctional H-bonding catalyzed ring-opening polymerizations towards polyether–polyester diblock copolymers

A switch of an anionic ROP of epoxides into a bifunctional H-bonding ROP of cyclic esters paved a new avenue to one-pot, sequential, and block copolymerizations to previously rare polyether-block-polyester copolymers.

Metallic organophosphate catalyzed bulk ring-opening polymerization

Metallic organophosphates have catalyzed the bulk ring-opening polymerization of cyclic esters and cyclic carbonates through a bifunctional mode.

Hybrid block copolymers of polyesters/polycarbonates and polypeptides synthesized via one-pot sequential ring-opening polymerization

Polyester/polycarbonate-b-polypeptide hybrid block copolymers were synthesized by a sequential ring-opening polymerization in a one-pot manner.

Synthesis of aluminum complexes supported by 2-(1,10-phenanthrolin-2-yl)phenolate ligands and their catalysis in the ring-opening polymerization of cyclic esters

Phenanthroline-phenolate based N,N,O-chelate aluminum complexes were demonstrated to catalyze the ROP of ε-caprolactone, rac-lactide, and rac-β-butyrolactone, as well as their block copolymerization.