Ultrastretchable and highly conductive hydrogels based on Fe3+- lignin nanoparticles for subzero wearable strain sensor

Conductive hydrogels have attracted considerable interest for potential applications in soft robotics, electronic skin and human monitoring. However, insufficient mechanical characteristics, low adhesion and unsatisfactory electrical conductivity severely restrict future application possibilities of hydrogels. Herein, lignin nanoparticles (LNPs)-Fe3+-ammonium persulfate (APS) catalytic system was introduced to assemble Poly(2-hydroxyethyl methacrylate)/LNPs/Ca2+ (PHEMA/LNPs/Ca) hydrogels. Due to the abundant metal coordination and hydrogen bonds, the composite hydrogel displayed ultrahigh stretchable capacity (3769 %), adhesion properties (248 kPa for skin) and self-healing performance. Importantly, hydrogel sensors possess with high durability, strain sensitivity (GF = 8.75), fast response time and freeze resistance (-20 °C) that could be employed to monitor motion signals in low-temperature regime. Therefore, the LNPs-Fe3+ catalytic system has great potential in preparing hydrogel for various applications such as human-computer interaction, artificial intelligence, personal healthcare and subzero wearable devices. At the same time, incorporation of natural macromolecules into polymer hydrogels is tremendous research significance for investigating high-value utilization of lignin.

A hierarchical system of covalent and dual non-covalent crosslinks promotes the toughness and self-healing properties of polymer hydrogels

While it is challenging to simultaneously achieve both high mechanical performance and self-healing ability within one polymer hydrogel network, we, herein, synthesized a novel class of hydrogels based on a combination of chemical and dual non-covalent crosslinks via micellar polymerization of 3-isocyanatomethyl-3,5,5-trimethylcyclohexyl isocyanate, end-capped by 2-hydroxyethyl methacrylate (IPDI-HEMA), with acrylamide (AM). The prepared hydrogels were demonstrated to possess a tensile elongation at a break of at least 1900%, a fracture energy of 138.4 kJ m^-3, and remarkable self-healing behaviors (e.g., a strong self-healing ability achieved at ambient temperature without the need for any stimulus or healing agent). The multiple crosslinks developed in this study for one polymer hydrogel network are significant steps to construct the desired functional hydrogels with excellent self-healing and mechanical properties.

Highly tough and rapid self-healing dual-physical crosslinking poly(DMAA-co-AM) hydrogel

Introducing double physical crosslinking reagents (i.e., a hydrophobic monomer micelle and the LAPONITE® XLG nano-clay) into the copolymerization reaction of hydrophilic monomers of N,N-dimethylacrylamide (DMAA) and acrylamide (AM) is reported here by a thermally induced free-radical polymerization method, resulting in a highly tough and rapid self-healing dual-physical crosslinking poly(DMAA-co-AM) hydrogel. The mechanical and self-healing properties can be finely tuned by varying the weight ratio of nanoclay to DMAA. The tensile strength and elongation at break of the resulting nanocomposite hydrogel can be modulated in the range of 7.5–60 kPa and 1630–3000%, respectively. Notably, such a tough hydrogel also exhibits fast self-healing properties, e.g., its self-healing rate reaches 48% and 80% within 2 and 24 h, respectively.

Introducing a micelle and LAPONITE® XLG nano-clay into N,N-dimethylacrylamide (DMAA)/acrylamide (AM) copolymerization reactions results in a highly tough and rapid self-healing dual-physical crosslinking poly(DMAA-co-AM) hydrogel.

A ionic liquid enhanced conductive hydrogel for strain sensing applications

Strain-sensitive and conductive hydrogels have attracted extensive research interest due to their potential applications in various fields, such as healthcare monitoring, human-machine interfaces and soft robots. However, low electrical signal transmission and poor tensile properties still limit the application of flexible sensing hydrogels in large amplitude and high frequency motion. In this study, a novel ionic liquid segmental polyelectrolyte hydrogel consisting of acrylic acid (AAc), 1-vinyl-3-butylimidazolium bromide (VBIMBr) and aluminum ion (Al³⁺) was prepared by molecular design and polymer synthesis. The cationic groups and amphiphilicity of ionic liquid chain segments effectively improve the tensile behavior of the polyelectrolyte hydrogel, with a maximum tensile strength of 0.16 MPa and a maximum breaking strain of 604%. The introduction of ionic liquid segments increased the current carrying concentration of polyelectrolyte hydrogel, and the conductivity reached the initial 4.8 times (12.5 S/m), which is a necessary condition for detecting various amplitude and high frequency limb movements. The flexible electronic sensor prepared by this polyelectrolyte hydrogel efficiently detects the movement of different parts of the human body stably and sensitively, even in extreme environment (-20 °C). These outstanding advantages demonstrate the great potential of this hydrogel in healthcare monitoring and wearable flexible strain sensors.

Poly(vinyl alcohol) Hydrogels with Integrated Toughness, Conductivity, and Freezing Tolerance Based on Ionic Liquid/Water Binary Solvent Systems

In recent years, ionic conductive hydrogels have shown great potential for application in flexible sensors, energy storage devices, and actuators. However, developing facile and effective methods for fabricating such hydrogels remains a great challenge, especially for hydrogels that retain their properties in extreme environmental conditions, such as at subzero temperatures or storage in open-air conditions. Herein, a water-miscible ionic liquid (IL), such as 1-ethyl-3-methylimidazolium acetate (EMImAc), was introduced to form an IL/water binary solvent system for poly(vinyl alcohol) (PVA) to create ionic conductive PVA hydrogels. The physically crosslinked PVA/EMImAc/H₂O hydrogels showed better mechanical properties and transparency than the traditional PVA hydrogel prepared by the freeze-thaw method due to the formation of homogeneous and small PVA microcrystals in the EMImAc/H₂O binary solvent system. More importantly, the PVA/EMImAc/H₂O hydrogel exhibited significant anti-freezing and water-retaining properties because of the presence of the IL. The hydrogels remained flexible and conductive at temperatures as low as -50 °C and retained more than 90% of their weight after storage in open-air conditions for 2 weeks. In addition, the thermal stability of the hydrogel could be increased to 95 °C through the addition of Mg(II) ions. A multimodal sensor based on the PVA/EMImAc/H₂O/Mg(II) hydrogel showed high sensitivity and a quick response to changes in pressure, strain, and temperature, with both long-term stability and a wide working temperature range. This study may open a new route for the fabrication of functional PVA-based hydrogel electrolytes and provide a practical pathway for their use in multifunctional electronic and sensory device applications.

Fabrication of self-healing nanocomposite hydrogels with the cellulose nanocrystals-based Janus hybrid nanomaterials

Janus nanomaterials possess remarkable prospects in the design of a series of smart materials with unique asymmetric properties. In this work, surface functionalized Janus cellulose nanocrystalline-type (CNCs-type) nanomaterials were manufactured by Pickering emulsion template and the construction of self-healing nanocomposite hydrogels has been realized. During emulsification, the mussel-inspired chemistry was employed to develop Janus nanocomposites. The extension of molecular chain of poly-lysine (PLL) and the polydopamine (PDA) coating were grafted on different sides of CNCs. Afterwards, the prepared nanocomposites were added to poly (acrylic acid) (PAA)-based hydrogels which formed by in-situ polymerization. The collaborative effect of metal-ligand coordination between the molecular chain of PLL, PDA coating, PAA chains and metal ions endowed the nanocomposite hydrogels with excellent mechanical properties (8.8 MPa) and self-healing efficiency (88.9%). Therefore, the synthesized Janus CNCs-PDA/PLL nanocomposites are expected to have diverse application in the development of smart materials with self-healing ability.

A novel hydrogel with self-healing property and bactericidal activity

In this study, we have designed and synthesized a novel poly (4 - vinyl benzene boronic acid - co - N - vinyl pyrrolidone - co - 1 - vinyl - 3 - butylimidazolium bromide) hydrogel (VNV hydrogel) dressing with good self-healing properties and bactericidal activity. The gelation and self-healing of this hydrogel are mainly achieved by the formation of a dynamic B-O-B bond between the polymer chains, which is fractured by external forces and subsequently reformed. This self-healing mechanism is studied in detail through the molecular design of the hydrogel. The introduction of hydrophilic chemical groups can effectively improve the porous structures, water absorption and molecular migration. These properties have a positive effect on improving self-healing properties of dynamic crosslinked hydrogels. Furthermore, this VNV hydrogel dressing displays good antibacterial activity against E. coli, S. aureus, and C. albicans. The application of VNV hydrogel dressing on rat wound surface can effectively accelerate wound healing. These results indicate that this novel VNV hydrogel dressing with good self-healing properties and bactericidal activity has potential applications in wound dressings.

Self-healing and tough GO-supported hydrogels preparedviasurface-initiated ATRP and photocatalytic modification

Hydrogels with the properties of self-healing, toughness, stiffness and strength have great potential for use in smart materials.

Fabrication of self-healing hydrogels with surface functionalized microcapsules from stellate mesoporous silica

This report describes a dual-healing method for self-healing hydrogels, in which stellate mesoporous silica (STMS) was used to prepare surface-functionalized microcapsules.

Thermo-reversible self-healing in a fluorous crosslinked copolymer

Self-healing in a fluorous copolymer material enhances its safety index and extends its working lifetime.

Tannic Acid-Based Multifunctional Hydrogels with Facile Adjustable Adhesion and Cohesion Contributed by Polyphenol Supramolecular Chemistry

Adhesiveness of hydrogels depends on the balance and synergy of their cohesion and adhesion. However, it is a challenge to fabricate catechol-based hydrogels with high adhesiveness because the required condition for cohesion and adhesion of these hydrogels is in conflict with each other: strong cohesion (gelation) requires a weak basic condition, whereas strong adhesion requires an acidic condition. Here, we demonstrated that by utilizing polyphenol supramolecular chemistry, the coexistence of strong cohesion and adhesion can be achieved in a hydrogel via the one-pot method. Poly(dimethyl diallyl ammonium chloride)/tannic acid (PDDA/TA) hydrogel has been studied as a proof of concept. Compared with catechol moieties that covalently grafted on polymer chains, TA can bring high density of pyrogallol/catechol functional groups for polymers via a noncovalent pathway, as well as high acidity in the system. As a result, the cohesion of the hydrogel is enhanced significantly, the highest storage moduli can reach up to ca. 0.15 MPa; besides, the high acidity of the hydrogel prevents pyrogallol/catechol groups from oxidation and guarantees strong adhesion; thus, the hydrogel can adhere to diverse substrates steadily, including tissues, glass, metals, and plastic. Moreover, because of the adjustable adhesiveness via changing the pH, the PDDA/TA hydrogel becomes a unique system with patternable adhesiveness. In addition, the hydrogel has rapid self-healing and high ionic conductivity (∼4.3 S m-1). This study demonstrates that utilizing polyphenol chemistry in the construction of hydrogels opens a new path toward multifunctional hydrogels with improved properties.