Computational design of non-porous pH-responsive antibody nanoparticles

Programming protein nanomaterials to respond to changes in environmental conditions is a current challenge for protein design and is important for targeted delivery of biologics. Here we describe the design of octahedral non-porous nanoparticles with a targeting antibody on the two-fold symmetry axis, a designed trimer programmed to disassemble below a tunable pH transition point on the three-fold axis, and a designed tetramer on the four-fold symmetry axis. Designed non-covalent interfaces guide cooperative nanoparticle assembly from independently purified components, and a cryo-EM density map closely matches the computational design model. The designed nanoparticles can package protein and nucleic acid payloads, are endocytosed following antibody-mediated targeting of cell surface receptors, and undergo tunable pH-dependent disassembly at pH values ranging between 5.9 and 6.7. The ability to incorporate almost any antibody into a non-porous pH-dependent nanoparticle opens up new routes to antibody-directed targeted delivery.

Thermostable T Cell Multiepitope Nanoparticle Antigens Inducing Potent Immune Responses against the Swine Fever Virus

African swine fever (ASF) is caused by the African swine fever virus (ASFV) and is a highly contagious, acute, febrile disease that has high morbidity and mortality rates in domestic and wild swine. However, a safe and effective vaccine against ASF remains unavailable as single antigens fail to provide sufficient protection. Therefore, a combination of multiple antigens with an efficient delivery system might be an alternative strategy. Herein, a de novo-designed antigen with multiple T-cell epitopes (TEPs) of ASFV was conjugated for surface display on self-assembled nanoparticles (NPs) of Aquifex aeolicus lumazine synthase (AaLS) and Quasibacillus thermotolerans encapsulin (QT) through the SpyCatcher/SpyTag system to construct nanovaccines (TEP-Spy-NPs). TEP-Spy-NPs exhibited significantly more thermal, storage, and freeze-thaw stability in comparison to TEP monomers. TEP-Spy-NPs were highly immunogenic and induced strong polyclonal antibody responses in mice and pigs. The specific antibody titers against the TEP of the TEP-Spy-AaLS and TEP-Spy-QT groups were significantly higher than those of the TEP monomer immune group after the second booster immunization. The antibody titer against TEP of the TEP-Spy-QT group was approximately twice that of the TEP-Spy-AaLS group in mice. ELISpot analysis demonstrated that more IFN-γ- and IL-2-secreting splenic lymphocytes were produced by TEP-Spy-AaLS- and TEP-Spy-QT-immunized mice than by TEP monomer-immunized mice. TEP-Spy-NPs elicited stronger cellular immunity and in vivo immunity in immunized pigs than did TEP monomers. Thus, the TEP nanovaccine successfully induced strong humoral and cellular immune responses in mice and pigs, and TEP-Spy-NPs have the potential as candidate vaccines for ASFV.

Development of recombinant secondary antibody mimics (rSAMs) for immunoassays through genetic fusion of monomeric alkaline phosphatase with antibody binders

In conventional immunoassays, a secondary antibody is used to amplify the signal generated by the binding of the primary antibody to the target analyte. Due to concerns regarding animal use and cost-inefficiency of secondary antibody productions, there is a significant demand for the development of recombinant secondary antibody mimics (rSAMs). Here, we developed rSAMs using a signal-generating enzyme, monomeric alkaline phosphatase (mALP), and antibody-binders, including monomeric streptavidin (mSA2) and mouse IgG1- or rabbit IgG-binding nanobodies (MG1Nb or RNb). The mALP-MG1Nb, mALP-RNb, and mALP-mSA2 were genetically constructed and produced in large quantities using bacterial overexpression systems, which reduced manufacturing costs and time without the use of animals. Each rSAM exhibited high and selective binding to its respective primary antibody, generating linear band signals corresponding to the amounts of target analytes in western blots. The rSAMs also successfully generated sigmoidal signal curves that increased as the sample concentration increased. Moreover, they generated stronger signals than conventional ALP-conjugated secondary antibodies and SA, particularly in the medium to high sample concentration range, in both indirect and sandwich-type indirect ELISAs at the same sample concentration. The rSAMs we developed here may provide new insights to develop novel immunoassay-based analytical and diagnostic tools.

Genetically Encoded Self-Assembling Protein Nanoparticles for the Targeted Delivery In Vitro and In Vivo

Targeted nanoparticles of different origins are considered as new-generation diagnostic and therapeutic tools. However, there are no targeted drug formulations within the composition of nanoparticles approved by the FDA for use in the clinic, which is associated with the insufficient effectiveness of the developed candidates, the difficulties of their biotechnological production, and inadequate batch-to-batch reproducibility. Targeted protein self-assembling nanoparticles circumvent this problem since proteins are encoded in DNA and the final protein product is produced in only one possible way. We believe that the combination of the endless biomedical potential of protein carriers as nanoparticles and the standardized protein purification protocols will make significant progress in "magic bullet" creation possible, bringing modern biomedicine to a new level. In this review, we are focused on the currently existing platforms for targeted self-assembling protein nanoparticles based on transferrin, lactoferrin, casein, lumazine synthase, albumin, ferritin, and encapsulin proteins, as well as on proteins from magnetosomes and virus-like particles. The applications of these self-assembling proteins for targeted delivery in vitro and in vivo are thoroughly discussed, including bioimaging applications and different therapeutic approaches, such as chemotherapy, gene delivery, and photodynamic and photothermal therapy. A critical assessment of these protein platforms' efficacy in biomedicine is provided and possible problems associated with their further development are described.

Application of periostin peptide-decorated self-assembled protein cage nanoparticles for therapeutic angiogenesis

Peptides are gaining substantial attention as therapeutics for human diseases. However, they have limitations such as low bioavailability and poor pharmacokinetics. Periostin, a matricellular protein, can stimulate the repair of ischemic tissues by promoting angiogenesis. We have previously reported that a novel angiogenic peptide (amino acids 142-151) is responsible for the pro-angiogenic activity of periostin. To improve the in vivo delivery efficiency of periostin peptide (PP), we used proteins self-assembled into a hollow cage-like structure as a drug delivery nanoplatform in the present study. The periostin peptide was genetically inserted into lumazine synthase (isolated from Aquifex aeolicus) consisting of 60 identical subunits with an icosahedral capsid architecture. The periostin peptide-bearing lumazine synthase protein cage nanoparticle with 60 periostin peptides multivalently displayed was expressed in Escherichia coli and purified to homogeneity. Next, we examined angiogenic activities of this periostin peptide-bearing lumazine synthase protein cage nanoparticle. AaLS-periostin peptide (AaLS-PP), but not AaLS, promoted migration, proliferation, and tube formation of human endothelial colony-forming cells in vitro. Intramuscular injection of PP and AaLS-PP increased blood perfusion and attenuated severe limb loss in the ischemic hindlimb. However, AaLS did not increase blood perfusion or alleviate tissue necrosis. Moreover, in vivo administration of AaLS-PP, but not AaLS, stimulated angiogenesis in the ischemic hindlimb. These results suggest that AaLS is a highly useful nanoplatform for delivering pro-angiogenic peptides such as PP.

Application of periostin peptide-decorated self-assembled protein cage nanoparticles for therapeutic angiogenesis

Peptides are gaining substantial attention as therapeutics for human diseases. However, they have limitations such as low bioavailability and poor pharmacokinetics. Periostin, a matricellular protein, can stimulate the repair of ischemic tissues by promoting angiogenesis. We have previously reported that a novel angiogenic peptide (amino acids 142-151) is responsible for the pro-angiogenic activity of periostin. To improve the in vivo delivery efficiency of periostin peptide (PP), we used proteins self-assembled into a hollow cage-like structure as a drug delivery nanoplatform in the present study. The periostin peptide was genetically inserted into lumazine synthase (isolated from Aquifex aeolicus) consisting of 60 identical subunits with an icosahedral capsid architecture. The periostin peptide-bearing lumazine synthase protein cage nanoparticle with 60 periostin peptides multivalently displayed was expressed in Escherichia coli and purified to homogeneity. Next, we examined angiogenic activities of this periostin peptide-bearing lumazine synthase protein cage nanoparticle. AaLS-periostin peptide (AaLS-PP), but not AaLS, promoted migration, proliferation, and tube formation of human endothelial colony-forming cells in vitro. Intramuscular injection of PP and AaLS-PP increased blood perfusion and attenuated severe limb loss in the ischemic hindlimb. However, AaLS did not increase blood perfusion or alleviate tissue necrosis. Moreover, in vivo administration of AaLS-PP, but not AaLS, stimulated angiogenesis in the ischemic hindlimb. These results suggest that AaLS is a highly useful nanoplatform for delivering pro-angiogenic peptides such as PP. [BMB Reports 2022; 55(4): 175-180].

Target-switchable Gd(III)-DOTA/protein cage nanoparticle conjugates with multiple targeting affibody molecules as target selective T1 contrast agents for high-field MRI

Magnetic resonance imaging (MRI) is a non-invasive in vivo imaging tool, providing high enough spatial resolution to obtain both the anatomical and the physiological information of patients. However, MRI generally suffers from relatively low sensitivity often requiring the aid of contrast agents (CA) to enhance the contrast of vessels and/or the tissues of interest from the background. The targeted delivery of diagnostic probes to the specific lesion is a powerful approach for early diagnosis and signal enhancement leading to the effective treatment of various diseases. Here, we established targeting ligand switchable nanoplatforms using lumazine synthase protein cage nanoparticles derived from Aquifex aeolicus (AaLS) by genetically introducing the SpyTag peptide (ST) to the C-terminus of the AaLS subunits to form an ST-displaying AaLS (AaLS-ST). Conversely, multiple targeting ligands were constructed by genetically fusing SpyCatcher protein (SC) to either HER2 or EGFR targeting affibody molecules (SC-HER2Afb or SC-EGFRAfb). Gd(III)-DOTA complexes were chemically attached to the AaLS-ST and the external surface of the Gd(III)-DOTA conjugated AaLS-ST (Gd(III)-DOTA-AaLS-ST) were successfully decorated with either the HER2Afb or the EGFRAfb. The resulting Gd(III)-DOTA-AaLS/HER2Afb and Gd(III)-DOTA-AaLS/EGFR2Afb exhibited high r₁ relaxivity values of 57 and 25 mM^-1 s^-1 at 1.4 and 7 T, respectively, which were 10-fold or higher than those of the clinically used Dotarem. Their target-selective contrast enhancements were confirmed with in vitro cell-based MRI scans and the in vivo MR imaging of tumor-bearing mouse models at 7 T. A target-switchable AaLS-based nanoplatform that was developed in this study might serve as a promising T₁ CA developing platform at a high magnetic field to detect various tumor sites in a target-specific manner in future clinical applications.

Cell-Specific Delivery Using an Engineered Protein Nanocage

Nanoparticle-based delivery systems have shown great promise for theranostics and bioimaging on the laboratory scale due to favorable pharmacokinetics and biodistribution. In this study, we examine the utility of a cage-forming variant of the protein lumazine synthase, which was previously designed and evolved to encapsulate biomacromolecular cargo. Linking antibody-binding domains to the exterior of the cage enabled binding of targeting immunoglobulins and cell-specific uptake of encapsulated cargo. Protein nanocages displaying antibody-binding domains appear to be less immunogenic than their unmodified counterparts, but they also recruit serum antibodies that can mask the efficacy of the targeting antibody. Our study highlights the strengths and limitations of a common targeting strategy for practical nanoparticle-based delivery applications.

Designed proteins assemble antibodies into modular nanocages

Multivalent display of receptor-engaging antibodies or ligands can enhance their activity. Instead of achieving multivalency by attachment to preexisting scaffolds, here we unite form and function by the computational design of nanocages in which one structural component is an antibody or Fc-ligand fusion and the second is a designed antibody-binding homo-oligomer that drives nanocage assembly. Structures of eight nanocages determined by electron microscopy spanning dihedral, tetrahedral, octahedral, and icosahedral architectures with 2, 6, 12, and 30 antibodies per nanocage, respectively, closely match the corresponding computational models. Antibody nanocages targeting cell surface receptors enhance signaling compared with free antibodies or Fc-fusions in death receptor 5 (DR5)-mediated apoptosis, angiopoietin-1 receptor (Tie2)-mediated angiogenesis, CD40 activation, and T cell proliferation. Nanocage assembly also increases severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) pseudovirus neutralization by α-SARS-CoV-2 monoclonal antibodies and Fc-angiotensin-converting enzyme 2 (ACE2) fusion proteins.

Designed proteins assemble antibodies into modular nanocages

Antibodies are widely used in biology and medicine, and there has been considerable interest in multivalent antibody formats to increase binding avidity and enhance signaling pathway agonism. However, there are currently no general approaches for forming precisely oriented antibody assemblies with controlled valency. We describe the computational design of two-component nanocages that overcome this limitation by uniting form and function. One structural component is any antibody or Fc fusion and the second is a designed Fc-binding homo-oligomer that drives nanocage assembly. Structures of 8 antibody nanocages determined by electron microscopy spanning dihedral, tetrahedral, octahedral, and icosahedral architectures with 2, 6, 12, and 30 antibodies per nanocage match the corresponding computational models. Antibody nanocages targeting cell-surface receptors enhance signaling compared to free antibodies or Fc-fusions in DR5-mediated apoptosis, Tie2-mediated angiogenesis, CD40 activation, and T cell proliferation; nanocage assembly also increases SARS-CoV-2 pseudovirus neutralization by α-SARS-CoV-2 monoclonal antibodies and Fc-ACE2 fusion proteins. We anticipate that the ability to assemble arbitrary antibodies without need for covalent modification into highly ordered assemblies with different geometries and valencies will have broad impact in biology and medicine.

Development of Recombinant Immunoglobulin G-Binding Luciferase-Based Signal Amplifiers in Immunoassays

In general immunoassays, secondary antibodies are covalently linked with enzymes and bind to the Fc region of target-bound primary antibodies to amplify signals of low-abundant target molecules. The antibodies themselves are obtained from large mammals and are further modified with enzymes. In this study, we developed novel recombinant immunoglobulin G (IgG)-binding luciferase-based signal amplifiers (rILSAs) by genetically fusing luciferase (Nluc) with antimouse IgG1 nanobody (MG1Nb) and antibody-binding domain (ABD), individually or together, in a mix-and-match manner. We obtained three different highly pure rILSAs in large quantities using a bacterial overexpression system and one-step purification. Mouse-specific rILSA, MG1Nb-Nluc, and rabbit-specific rILSA, Nluc-ABD, selectively bound to target-molecule-bound mouse IgG1 and rabbit IgG primary antibodies, whereas the bispecific rILSA, MG1Nb-Nluc-ABD, mutually bound to both mouse IgG1 and rabbit IgG primary antibodies. All rILSAs exhibited an outstanding signal-amplifying capability comparable to those of conventional horseradish-peroxidase-conjugated secondary antibodies, regardless of the target molecules, in various immunoassay formats, such as enzyme-linked immunosorbent assay, Western blot, and lateral flow assays. Each rILSA was selected for its own individual purpose and applied to various types of target analytes, in combination with a variety of target-specific primary antibodies, effectively minimizing the use of animals as well as reducing the costs and time associated with the production and chemical conjugation of signal-amplifying enzymes.

Understanding the riboflavin biosynthesis pathway for the development of antimicrobial agents

Life on earth depends on the biosynthesis of riboflavin, which plays a vital role in biological electron transport processes. Higher mammals obtain riboflavin from dietary sources; however, various microorganisms, including Gram-negative pathogenic bacteria and yeast, lack an efficient riboflavin-uptake system and are dependent on endogenous riboflavin biosynthesis. Consequently, the inhibition of enzymes in the riboflavin biosynthesis pathway would allow selective toxicity to a pathogen and not the host. Thus, the riboflavin biosynthesis pathway is an attractive target for designing novel antimicrobial drugs, which are urgently needed to address the issue of multidrug resistance seen in various pathogens. The enzymes involved in riboflavin biosynthesis are lumazine synthase (LS) and riboflavin synthase (RS). Understanding the details of the mechanisms of the enzyme-catalyzed reactions and the structural changes that occur in the enzyme active sites during catalysis can facilitate the design and synthesis of suitable analogs that can specifically inhibit the relevant enzymes and stop the generation of riboflavin in pathogenic bacteria. The present review is the first compilation of the work that has been carried out over the last 25 years focusing on the design of inhibitors of the biosynthesis of riboflavin based on an understanding of the mechanisms of LS and RS. This review aimed to address the fundamental advances in our understanding of riboflavin biosynthesis as applied to the rational design of a novel class of inhibitors. These advances have been aided by X-ray structures of ligand-enzyme complexes, rotational-echo, double-resonance nuclear magnetic resonance spectroscopy, high-throughput screening, virtual screenings, and various mechanistic probes.

Fabrication of Nanoreaction Clusters with Dual-Functionalized Protein Cage Nanobuilding Blocks

Fabrication of functional nanostructures is a prominent issue in nanotechnology, because they often exhibit unique properties that are different from the individual building blocks. Protein cage nanoparticles are attractive nanobuilding blocks for constructing nanostructures due to their well-defined symmetric spherical structures, polyvalent nature, and functional plasticity. Here, a lumazine synthase protein cage nanoparticle is genetically modified to be used as a template to generate functional nanobuilding blocks and covalently display enzymes (β-lactamase) and protein ligands (FKBP12/FRB) on its surface, making dual-functional nanobuilding blocks. Nanoreaction clusters are subsequently created by ligand-mediated alternate deposition of two complementary building blocks using layer-by-layer (LbL) assemblies. 3D nanoreaction clusters provide enhanced enzymatic activity compared with monolayered building block arrays. The approaches described here may provide new opportunities for fabricating functional nanostructures and nanoreaction clusters, leading to the development of new protein nanoparticle-based nanostructured biosensor devices.

Bioengineering Strategies for Protein-Based Nanoparticles

In recent years, the practical application of protein-based nanoparticles (PNPs) has expanded rapidly into areas like drug delivery, vaccine development, and biocatalysis. PNPs possess unique features that make them attractive as potential platforms for a variety of nanobiotechnological applications. They self-assemble from multiple protein subunits into hollow monodisperse structures; they are highly stable, biocompatible, and biodegradable; and their external components and encapsulation properties can be readily manipulated by chemical or genetic strategies. Moreover, their complex and perfect symmetry have motivated researchers to mimic their properties in order to create de novo protein assemblies. This review focuses on recent advances in the bioengineering and bioconjugation of PNPs and the implementation of synthetic biology concepts to exploit and enhance PNP's intrinsic properties and to impart them with novel functionalities.

Tailoring lumazine synthase assemblies for bionanotechnology

The cage-forming protein lumazine synthase is readily modified, evolved and assembled with other components.

The C-terminal peptide of Aquifex aeolicus riboflavin synthase directs encapsulation of native and foreign guests by a cage-forming lumazine synthase

Encapsulation of specific enzymes in self-assembling protein cages is a hallmark of bacterial compartments that function as counterparts to eukaryotic organelles. The cage-forming enzyme lumazine synthase (LS) from Bacillus subtilis (BsLS), for example, encapsulates riboflavin synthase (BsRS), enabling channeling of lumazine from the site of its generation to the site of its conversion to vitamin B2 Elucidating the molecular mechanisms underlying the assembly of these supramolecular complexes could help inform new approaches for metabolic engineering, nanotechnology, and drug delivery. To that end, we investigated a thermostable LS from Aquifex aeolicus (AaLS) and found that it also forms cage complexes with the cognate riboflavin synthase (AaRS) when both proteins are co-produced in the cytosol of Escherichia coli A 12-amino acid-long peptide at the C terminus of AaRS serves as a specific localization sequence responsible for targeting the guest to the protein compartment. Sequence comparisons suggested that analogous peptide segments likely direct RS complexation by LS cages in other bacterial species. Covalent fusion of this peptide tag to heterologous guest molecules led to their internalization into AaLS assemblies both in vivo and in vitro, providing a firm foundation for creating tailored biomimetic nanocompartments for medical and biotechnological applications.

Effective Delivery of Antigen-Encapsulin Nanoparticle Fusions to Dendritic Cells Leads to Antigen-Specific Cytotoxic T Cell Activation and Tumor Rejection

In cancer immunotherapy, robust and efficient activation of cytotoxic CD8(+) T cell immune responses is a promising, but challenging task. Dendritic cells (DCs) are well-known professional antigen presenting cells that initiate and regulate antigen-specific cytotoxic CD8(+) T cells that kill their target cells directly as well as secrete IFN-γ, a cytokine critical in tumor rejection. Here, we employed recently established protein cage nanoparticles, encapsulin (Encap), as antigenic peptide nanocarriers by genetically incorporating the OT-1 peptide of ovalbumin (OVA) protein to the three different positions of the Encap subunit. With them, we evaluated their efficacy in activating DC-mediated antigen-specific T cell cytotoxicity and consequent melanoma tumor rejection in vivo. DCs efficiently engulfed Encap and its variants (OT-1-Encaps), which carry antigenic peptides at different positions, and properly processed them within phagosomes. Delivered OT-1 peptides were effectively presented by DCs to naïve CD8(+) T cells successfully, resulting in the proliferation of antigen-specific cytotoxic CD8(+) T cells. OT-1-Encap vaccinations in B16-OVA melanoma tumor bearing mice effectively activated OT-1 peptide specific cytotoxic CD8(+) T cells before or even after tumor generation, resulting in significant suppression of tumor growth in prophylactic as well as therapeutic treatments. A large number of cytotoxic CD8(+) T cells that actively produce both intracellular and secretory IFN-γ were observed in tumor-infiltrating lymphocytes collected from B16-OVA tumor masses originally vaccinated with OT-1-Encap-C upon tumor challenges. The approaches we describe herein may provide opportunities to develop epitope-dependent vaccination systems that stimulate and/or modulate efficient and epitope-specific cytotoxic T cell immune responses in nonpathogenic diseases.