Microwave-Assisted Synthesis as a Promising Tool for the Preparation of Materials Containing Defective Carbon Nanostructures: Implications on Properties and Applications

In this review, we focus on a small section of the literature that deals with the materials containing pristine defective carbon nanostructures (CNs) and those incorporated into the larger systems containing carbon atoms, heteroatoms, and inorganic components.. Briefly, we discuss only those topics that focus on structural defects related to introducing perturbation into the surface topology of the ideal lattice structure. The disorder in the crystal structure may vary in character, size, and location, which significantly modifies the physical and chemical properties of CNs or their hybrid combination. We focus mainly on the method using microwave (MW) irradiation, which is a powerful tool for synthesizing and modifying carbon-based solid materials due to its simplicity, the possibility of conducting the reaction in solvents and solid phases, and the presence of components of different chemical natures. Herein, we will emphasize the advantages of synthesis using MW-assisted heating and indicate the influence of the structure of the obtained materials on their physical and chemical properties. It is the first review paper that comprehensively summarizes research in the context of using MW-assisted heating to modify the structure of CNs, paying attention to its remarkable universality and simplicity. In the final part, we emphasize the role of MW-assisted heating in creating defects in CNs and the implications in designing their properties and applications. The presented review is a valuable source summarizing the achievements of scientists in this area of research.

Vacancy designed 2D materials for electrodes in energy storage devices

Vacancies are ubiquitous in nature, usually playing an important role in determining how a material behaves, both physically and chemically. As a consequence, researchers have introduced oxygen, sulphur and other vacancies into bi-dimensional (2D) materials, with the aim of achieving high performance electrodes for electrochemical energy storage. In this article, we focused on the recent advances in vacancy engineering of 2D materials for energy storage applications (supercapacitors and secondary batteries). Vacancy defects can effectively modify the electronic characteristics of 2D materials, enhancing the charge-transfer processes/reactions. These atomic-scale defects can also serve as extra host sites for inserted protons or small cations, allowing easier ion diffusion during their operation as electrodes in supercapacitors and secondary batteries. From the viewpoint of materials science, this article summarises recent developments in the exploitation of vacancies (which are surface defects, for these materials), including various defect creation approaches and cutting-edge techniques for detection of vacancies. The crucial role of defects for improvement in the energy storage performance of 2D electrode materials in electrochemical devices has also been highlighted.

Designed Concave Octahedron Heterostructures Decode Distinct Metabolic Patterns of Epithelial Ovarian Tumors

Epithelial ovarian cancer (EOC) is a polyfactorial process associated with alterations in metabolic pathways. A high-performance screening tool for EOC is in high demand to improve prognostic outcome but is still missing. Here, a concave octahedron Mn₂ O₃ /(Co,Mn)(Co,Mn)₂ O₄ (MO/CMO) composite with a heterojunction, rough surface, hollow interior, and sharp corners is developed to record metabolic patterns of ovarian tumors by laser desorption/ionization mass spectrometry (LDI-MS). The MO/CMO composites with multiple physical effects induce enhanced light absorption, preferred charge transfer, increased photothermal conversion, and selective trapping of small molecules. The MO/CMO shows ≈2-5-fold signal enhancement compared to mono- or dual-enhancement counterparts, and ≈10-48-fold compared to the commercialized products. Subsequently, serum metabolic fingerprints of ovarian tumors are revealed by MO/CMO-assisted LDI-MS, achieving high reproducibility of direct serum detection without treatment. Furthermore, machine learning of the metabolic fingerprints distinguishes malignant ovarian tumors from benign controls with the area under the curve value of 0.987. Finally, seven metabolites associated with the progression of ovarian tumors are screened as potential biomarkers. The approach guides the future depiction of the state-of-the-art matrix for intensive MS detection and accelerates the growth of nanomaterials-based platforms toward precision diagnosis scenarios.

Microwave as a Tool for Synthesis of Carbon-Based Electrodes for Energy Storage

This Spotlight on Applications highlights the significant impact of microwave-assisted methods for synthesis and modification of carbon materials with enhanced properties for electrodes in energy storage applications (supercapacitors and batteries). For the past few years, microwave irradiation has been increasingly used for the synthesis of carbon materials with different morphologies using various precursors. Microwave processing exhibits numerous advantages, such as short processing times, high yield, expanded reaction conditions, high reproducibility, and high purity of products. On this frontier research area, we have discussed microwave-assisted synthesis, defect creation, simultaneous reduction and exfoliation, and heteroatom doping in carbon materials. By careful manipulation of microwave irradiation parameters, the method becomes a powerful and efficient tool to generate different morphologies in carbon-based materials. Other important outcomes are the flexible control over the degree of reduction and exfoliation of graphene derivatives, the generation of defects in graphene-based materials by metals, the intercalation of metal oxides into graphene derivatives, and heteroatom doping of graphene materials. The Spotlight on Applications aims to provide a condensed overview of the current progress in carbon-based electrodes synthesized by microwave, pointing out outstanding challenges and offering a few suggestions to trigger more research endeavors in this important field.

Facile In Situ Synthesis of Co(OH)2-Ni3S2 Nanowires on Ni Foam for Use in High-Energy-Density Supercapacitors

Ni3S2 nanowires were synthesized in situ using a one-pot hydrothermal reaction on Ni foam (NF) for use in supercapacitors as a positive electrode, and various contents (0.3-0.6 mmol) of Co(OH)2 shells were coated onto the surfaces of the Ni3S2 nanowire cores to improve the electrochemical properties. The Ni3S2 nanowires were uniformly formed on the smooth NF surface, and the Co(OH)2 shell was formed on the Ni3S2 nanowire surface. By direct NF participation as a reactant without adding any other Ni source, Ni3S2 was formed more closely to the NF surface, and the Co(OH)2 shell suppressed the loss of active material during charging-discharging, yielding excellent electrochemical properties. The Co(OH)2-Ni3S2/Ni electrode produced using 0.5 mmol Co(OH)2 (Co0.5-Ni3S2/Ni) exhibited a high specific capacitance of 1837 F g-1 (16.07 F cm-2) at a current density of 5 mA cm-2, and maintained a capacitance of 583 F g-1 (16.07 F cm-2) at a much higher current density of 50 mA cm-2. An asymmetric supercapacitor (ASC) with Co(OH)2-Ni3S2 and active carbon displayed a high-power density of 1036 kW kg-1 at an energy density of 43 W h kg-1 with good cycling stability, indicating its suitability for use in energy storage applications. Thus, the newly developed core-shell structure, Co(OH)2-Ni3S2, was shown to be efficient at improving the electrochemical performance.

Construction of a Cu-Based Metal-Organic Framework by Employing a Mixed-Ligand Strategy and Its Facile Conversion into Nanofibrous CuO for Electrochemical Energy Storage Applications

Recently, metal-organic frameworks (MOFs) have been widely employed as a sacrificial template for the construction of nanostructured materials for a range of applications including energy storage. Herein, we report a facile mixed-ligand strategy for the synthesis of a Cu-MOF, [Cu₃(Azopy)₃(BTTC)₃(H₂O)₃·2H₂O]_n (where BTTC = 1,2,4,5-benzenetetracarboxylic acid and Azopy = 4,4'-azopyridine), via a slow-diffusion method at room temperature. X-ray analysis authenticates the two-dimensional (2D)-layered framework of Cu-MOF. Topologically, this 2D-layered structure is assigned as a 4-connected unimodal net with sql topology. Further, nanostructured CuO is obtained via a simple precipitation method by employing Cu-MOF as a precursor. After analysis of their physicochemical properties through various techniques, both materials are used as surface modifiers of glassy carbon electrodes for a comparative electrochemical study. The results reveal a superior charge storage performance of CuO (244.2 F g^-1 at a current density of 0.8 A g^-1) with a high rate capability compared to Cu-MOF. This observation paves the pathway for the strategic design of high-performing supercapacitor electrode materials.

A review of the microwave-assisted synthesis of carbon nanomaterials, metal oxides/hydroxides and their composites for energy storage applications

Currently, nanomaterials are considered to be the backbone of modern civilization. Especially in the energy sector, nanomaterials (mainly, carbon- and metal oxide/hydroxide-based nanomaterials) have contributed significantly. Among the various green approaches for the synthesis of these nanomaterials, the microwave-assisted approach has attracted significant research interest worldwide. In this context, it is noteworthy to mention that because of their enhanced surface area, high conducting nature, and excellent electrical and electrochemical properties, carbon nanomaterials are being extensively utilized as efficient electrode materials for both supercapacitors and secondary batteries. In this review article, we briefly demonstrate the characteristics of microwave-synthesized nanomaterials for next-generation energy storage devices. Starting with the basics of microwave heating, herein, we illustrate the past and present status of microwave chemistry for energy-related applications, and finally present a brief outlook and concluding remarks. We hope that this review article will positively convey new insights for the microwave synthesis of nanomaterials for energy storage applications.

Comprehensive Review on Graphene Oxide for Use in Drug Delivery System

Motivated by the accomplishment of carbon nanotubes (CNTs), graphene and graphene oxide (GO) has been widely investigated in the previous studies as an innovative medication nanocarrier for the loading of a variety of therapeutics as well as anti-cancer medications, poor dissolvable medications, antibiotics, antibodies, peptides, DNA, RNA and genes. Graphene provides the ultra-high drug-loading efficiency due to the wide surface area. Graphene and graphene oxide have been widely investigated for biomedical applications due to their exceptional qualities: twodimensional planar structure, wide surface area, chemical and mechanical constancy, sublime conductivity and excellent biocompatibility. Due to these unique qualities, GO applications provide advanced drug transports frameworks and transports of a broad range of therapeutics. In this review, we discussed the latest advances and improvements in the uses of graphene and GO for drug transport and nanomedicine. Initially, we have described what is graphene and graphene oxide. After that, we discussed the qualities of GO as a drug carrier, utilization of GO in drug transport applications, targeted drug transport, transport of anticancer medications, chemical control medicine releasee, co-transport of different medications, comparison of GO with CNTs, nano-graphene for drug transport and at last, we have discussed the graphene toxicity. Finally, we draw a conclusion of current expansion and the potential outlook for the future.

Enhancement of the supercapacitive properties of laser deposited graphene-based electrodes through carbon nanotube loading and nitrogen doping

Several technological routes are being investigated for improving the energy storage capability and power delivery of electrochemical capacitors. In this work, ternary hybrid electrodes composed of conducting graphene/reduced graphene oxide (rGO), which store charge mainly through electric double-layer mechanisms, covered by NiO nanostructures, for adding pseudocapacitance, were fabricated through a matrix assisted pulsed laser evaporation technique. The incorporation of multiwall carbon nanotubes (MWCNTs) provokes an increase of the porosity and thus, a substantial enhancement of the electrodes' capacitance (from 4 to 20 F cm^-3 at 10 mV s^-1). Volumetric capacitances of 34 F cm^-3 were also obtained with electrodes containing just carbon nanotubes coated with NiO nanostructures. Moreover, the use of nitrogen containing precursors (ammonia, urea) for laser-induced N-doping of the nanocarbons also provokes a notable increase of the capacitance. Remarkably, N-containing groups in rGO-MWCNTs mainly add electric double layer charge storage, pointing to an increase of electrode porosity, whereas redox reactions contribute with a minor diffusion fraction. It was also observed that the loading of carbon nanotubes leads to an increase of diffusion-controlled charge storage mechanisms versus capacitive ones in rGO-based electrodes, the opposite effect being observed in graphene electrodes.

Three-dimensional macroporous graphene-wrapped zero-valent copper nanoparticles as efficient micro-electrolysis-promoted Fenton-like catalysts for metronidazole removal

Three-dimensional macroporous graphene-wrapped zero-valent copper nanoparticles (3D-GN@Cu⁰) were synthesized using a self-assembly process of liquid-phase reduction and characterized by field emission scanning electron microscopy, nitrogen adsorption/desorption isotherms, X-ray diffraction, Raman spectrum analysis, and X-ray photoelectron spectroscopy. The catalytic activity of 3D-GN@Cu⁰ was evaluated in view of the effects of various systems, the pH value, catalyst dosage, initial metronidazole concentration and temperature, and it showed a high efficiency for removing metronidazole with saturated dissolved oxygen (without adding extra H₂O₂) in a wide range of pH value from 3.2 to 9.8. Combined with the results of dissolved oxygen activation, determination of reactive oxidizing species, and X-ray photoelectron spectroscopy (XPS) analysis, the surface-bounded ·OH_ads formed by the reaction of the in situ generation H₂O₂ with 3D-GN@Cu⁰ was mainly responsible for the removal of metronidazole. The charge distribution and electrostatic potential (ESP) of 3D-GN@Cu⁰ further illustrated the distribution and transfer of electrons on the catalyst surface, which predicted a micro-electrolysis-promoted Fenton-like reaction mechanism.

Ni(OH)₂ and NiO Based Composites: Battery Type Electrode Materials for Hybrid Supercapacitor Devices

Nanocomposites of Ni(OH)₂ or NiO have successfully been used in electrodes in the last five years, but they have been falsely presented as pseudocapacitive electrodes for electrochemical capacitors and hybrid devices. Indeed, these nickel oxide or hydroxide electrodes are pure battery-type electrodes which store charges through faradaic processes as can be shown by cyclic voltammograms or constant current galvanostatic charge/discharge plots. Despite this misunderstanding, such electrodes can be of interest as positive electrodes in hybrid supercapacitors operating under KOH electrolyte, together with an activated carbon-negative electrode. This study indicates the requirements for the implementation of Ni(OH)₂-based electrodes in hybrid designs and the improvements that are necessary in order to increase the energy and power densities of such devices. Mass loading is the key parameter which must be above 10 mg·cm⁻² to correctly evaluate the performance of Ni(OH)₂ or NiO-based nanocomposite electrodes and provide gravimetric capacity values. With such loadings, rate capability, capacity, cycling ability, energy and power densities can be accurately evaluated. Among the 80 papers analyzed in this study, there are indications that such nanocomposite electrode can successfully improve the performance of standard Ni(OH)₂ (+)//6 M KOH//activated carbon (−) hybrid supercapacitor.

CTAB-Aided Synthesis of Stacked V2O5 Nanosheets: Morphology, Electrochemical Features and Asymmetric Device Performance

To accomplish superior performance in supercapacitors, a fresh class of electrode materials with advantageous structures is essential. Owing to its rich electrochemical activity, vanadium oxides are considered to be an attractive electrode material for energy storing devices. In this work, vanadium pentoxide (V2O[Formula: see text] nanostructures were prepared using surfactant (CTAB)-assisted hydrothermal route. Stacked V2O5 sheets enable additional channels for electrolyte ion intercalation. These stacked V2O5 nanosheets show highest specific capacitance of 466[Formula: see text]Fg[Formula: see text] at 0.5[Formula: see text]Ag[Formula: see text]. In addition, it exhibits good rate capacity, lower value of charge transfer resistance and good stability when used as an electrode material for supercapacitors. Further, an asymmetric supercapacitor device was assembled utilizing the stacked V2O5 sheets and activated carbon as electrodes. The electrochemical features of the device are also discussed.

Construction of Hierarchically One-Dimensional Core-Shell CNT@Microporous Carbon by Covalent Bond-Induced Surface-Confined Cross-Linking for High-Performance Supercapacitor

A covalent bond-induced surface-confined cross-linking is reported to construct one-dimensional coaxial CNT@microporous carbon composite (CNT@micro-C). Octaphenyl polyhedral oligomeric silsesquioxane (Ph-POSS) composed of eight phenyls and a -Si₈O₁₂ cage was selected as precursor for microporous carbon. The layer-by-layer cross-linking of phenyl anchored Ph-POSS on the surface of CNT; after carbonization and etching of -Si₈O₁₂ cages, CNT@micro-C including CNT core and microporous carbon shell was harvested. The thickness of microporous carbon shell can be well tailored from 6.0 to 20.0 nm, and the surface area of CNT@micro-C can reach 1306 m² g^-1. CNT@micro-C combines the structural advantages of CNT and microporous carbon, presenting large surface area, high electrical conductivity, fast ion transfer speed, and short ion transfer distance. When used as electrode material, CNT@micro-C reveals superior supercapacitive performance; for example, its capacitance can reach 243 F g^-1 at 0.5 A g^-1 and slightly decreases to 209 F g^-1 at 10 A g^-1, indicating a capacitance retention of 86%. Even at a very high scan rate of 50 A g^-1, a high capacitance of 177 F g^-1 is retained, giving a capacitance retention of 73%.

Synthesis of graphene-transition metal oxide hybrid nanoparticles and their application in various fields

Single layer graphite, known as graphene, is an important material because of its unique two-dimensional structure, high conductivity, excellent electron mobility and high surface area. To explore the more prospective properties of graphene, graphene hybrids have been synthesised, where graphene has been integrated with other important nanoparticles (NPs). These graphene-NP hybrid structures are particularly interesting because after hybridisation they not only display the individual properties of graphene and the NPs, but also they exhibit further synergistic properties. Reduced graphene oxide (rGO), a graphene-like material, can be easily prepared by reduction of graphene oxide (GO) and therefore offers the possibility to fabricate a large variety of graphene-transition metal oxide (TMO) NP hybrids. These hybrid materials are promising alternatives to reduce the drawbacks of using only TMO NPs in various applications, such as anode materials in lithium ion batteries (LIBs), sensors, photocatalysts, removal of organic pollutants, etc. Recent studies have shown that a single graphene sheet (GS) has extraordinary electronic transport properties. One possible route to connecting those properties for application in electronics would be to prepare graphene-wrapped TMO NPs. In this critical review, we discuss the development of graphene-TMO hybrids with the detailed account of their synthesis. In addition, attention is given to the wide range of applications. This review covers the details of graphene-TMO hybrid materials and ends with a summary where an outlook on future perspectives to improve the properties of the hybrid materials in view of applications are outlined.

Self-Assembled and One-Step Synthesis of Interconnected 3D Network of Fe3O4/Reduced Graphene Oxide Nanosheets Hybrid for High-Performance Supercapacitor Electrode

In the present work, we have synthesized three-dimensional (3D) reduced graphene oxide nanosheets (rGO NSs) containing iron oxide nanoparticles (Fe₃O₄ NPs) hybrids (3D Fe₃O₄/rGO) by one-pot microwave approach. Structural and morphological studies reveal that the as-synthesized Fe₃O₄/rGO hybrids were composed of faceted Fe₃O₄ NPs induced into the interconnected network of rGO NSs. The morphologies and structures of the 3D hybrids have been characterized using scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), Raman spectroscopy and X-ray photoelectron spectrometer (XPS). The electrochemical studies were analyzed by cyclic voltammetry, galvanostatic charge/discharge measurements, and electrochemical impedance spectroscopy, which demonstrate superior electrochemical performance as supercapacitors electrode application. The specific capacitances of 3D hybrid materials was 455 F g^-1 at the scan rate of 8 mV s^-1, which is superior to that of bare Fe₃O₄ NPs. Additionally, the 3D hybrid shows good cycling stability with a retention ratio of 91.4 after starting from ∼190 cycles up to 9600 cycles. These attractive results suggest that this 3D Fe₃O₄/rGO hybrid shows better performance as an electrode material for high-performance supercapacitors.

Synthesis of reduced graphene oxide nanosheet-supported agglomerated cobalt oxide nanoparticles and their enhanced electron field emission properties

The field emission properties were demonstrated of reduced graphene oxide nanosheets (rGO-NSs) containing agglomerated Co₃O₄ nanoparticles (rGO–Co₃O₄) synthesized by a one-step microwave approach.

Unique nanopetals of nickel vanadate: crystal structure elucidation and supercapacitive performance

Unique nanopetal array of nickel vanadate is explored for its crystal structure and promising pseudocapacitive performance.

Synthesis of a hierarchical cobalt sulfide/cobalt basic salt nanocomposite via a vapor-phase hydrothermal method as an electrode material for supercapacitor

A hierarchical cobalt sulfide/cobalt basic salt nanocomposite shows excellent electrochemical performances as a supercapacitor.

3D Hierarchical Co-Al Layered Double Hydroxides with Long-Term Stabilities and High Rate Performances in Supercapacitors

Three-dimensional (3D) flower-like Co-Al layered double hydroxide (Co-Al-LDH) architectures composed of atomically thin nanosheets were successfully synthesized via a hydrothermal method in a mixed solvent of water and butyl alcohol. Owing to the unique hierarchical structure and modification by butyl alcohol, the electrochemical stability and the charge/mass transport of the Co-Al-LDHs was improved. When used in supercapacitors, the obtained Co-Al-LDHs deliver a high specific capacitance of 838 F g^-1 at a current density of 1 A g^-1 and excellent rate performance (753 F g^-1 at 30 A g^-1 and 677 F g^-1 at 100 A g^-1), as well as excellent cycling stability with 95% retention of the initial capacitance even after 20,000 cycles at a current density of 5 A g^-1. This work provides a promising alternative strategy to enhance the electrochemical properties of supercapacitors.

A process to enhance the specific surface area and capacitance of hydrothermally reduced graphene oxide

The impact of post-synthesis processing in reduced graphene oxide materials for supercapacitor electrodes has been analyzed. A comparative study of vacuum, freeze and critical point drying was carried out for hydrothermally reduced graphene oxide demonstrating that the optimization of the specific surface area and preservation of the porous network are critical to maximize its supercapacitance performance. As described below, using a supercritical fluid as the drying medium, unprecedented values of the specific surface area (364 m² g^-1) and supercapacitance (441 F g^-1) for this class of materials have been achieved.

Fabrication of interdigitated micro-supercapacitor devices by direct laser writing onto ultra-thin, flexible and free-standing graphite oxide films

In this work we present graphene-based in-plane flexible interdigitated micro-supercapacitor devices fabricated through direct laser writing onto ultra-thin graphite oxide (GO) films.