Shear-Stable Polymer Brush Surfaces

Research on polymer brushes (PBs) has aroused great interest due to their wide range of applications in lubrication, antifogging, antifouling, self-cleaning, antiadhesion, antibacterial effects, and so forth. However, the weak mechanical strength, especially the low bond strength between the PBs and the substrate surface, is a long-standing challenge for its practical applications, which is directly related to the service life of the PB surface. Fortunately, the imperfection of the PB surface was gradually solved by researchers by combining the action of the chemical and physical anchoring strength, and many shear-stable PB surfaces were developed. In this Perspective, we present recent developments in the studies of shear-stable PBs. Conventional strategies that altered the structure of PB chain methods, including increasing grafted density, cross-linking of PBs, cyclic PBs, and so forth, are introduced briefly. The systematic subsurface grafting of the polymer brush (SSPB) strategy was introduced emphatically. The SSPB method grafted PB into the subsurface with considerable depth and gave a robust and reusable PB layer, which provided an approach for tackling the shear-resistance issue. Besides, the robust hydrophobic poly(dimethylsiloxane) (PDMS) brush surface that lubricated itself in air was also introduced. Finally, we provide a synopsis and discuss the outlook of the shear-stable PB surface.

Injectable hydrogel microspheres with self-renewable hydration layers alleviate osteoarthritis

Introducing hydration layers to hydrogel microspheres (HMs) by coating the surface with liposomes can effectively reduce friction. However, the lubrication can be inactivated when the surface coatings are damaged. To endow HMs with the ability to form self-renewable hydration layers and maintain cellular homeostasis, rapamycin-liposome-incorporating hyaluronic acid-based HMs (RAPA@Lipo@HMs) were created using microfluidic technology and photopolymerization processes. The RAPA@Lipo@HMs improve joint lubrication by using a smooth rolling mechanism and continuously exposing liposomes on the outer surface to form self-renewable hydration layers via frictional wear. In addition, the released autophagy activator (rapamycin)-loaded cationic liposomes can target negatively charged cartilage through electrostatic interactions and maintain cellular homeostasis by increasing autophagy. Furthermore, the in vivo data showed that the RAPA@Lipo@HMs can alleviate joint wear and delay the progression of osteoarthritis. The RAPA@Lipo@HMs can provide efficient lubrication and potentially alleviate friction-related diseases such as osteoarthritis.

A Dual-Responsive Peptide-Based Smart Biointerface with Biomimetic Adhesive Behaviors for Bacterial Isolation

As mimics of the extracellular matrix, surfaces with the capability of capturing and releasing specific cells in a smart and controllable way play an important role in bacterial isolation. In this work, we fabricated a dual-responsive smart biointerface via peptide self-assembly and reversible covalent chemistry biomimetic adhesion behavior for bacterial isolation. Compared with that of the biointerface based on a single reversible covalent bond, the bacterial enrichment efficiency obtained in this work was 2.3 times higher. Furthermore, the release of bacteria from the surface could be achieved by dual responsiveness (sugar and enzyme), which makes the biointerface more adaptable and compatible under different conditions. Finally, the reusability of the biointerface was verified via peptide self-assembly and the regenerated smart biointerface still showed good bacterial capture stability and excellent release efficiency, which was highly anticipated to be more widely applied in biomaterial science and biomedicine in the future.

Layer by layer assembled functionalized graphene oxide-based polymer brushes for superlubricity on steel-steel tribocontact

This study demonstrates a simple and multistep approach for a covalent functionalization of chemically-prepared graphene oxide (GO) using branched polyethylenimine (PEI) through nucleophilic addition reaction to prepare GO-PEI. Further layer-by-layer (LBL) assembly on functionalized GO-PEI with anionic polyelectrolyte, poly(acrylic acid sodium salt) (PAA) and poly(sodium 4-styrenesulfonate) (PSS) have been undertaken to fabricate polymer brushes (PB). The physicochemical structures of GO, GO-PEI and LBL assembled PB [GO-PEI-PAA and GO-PEI-PSS] have been explored using standard spectral and morphological analysis. The macrotribological results demonstrated that GO-PEI-PAA/GO-PEI-PSS (0.5 wt%) as paraffin oil dispersible additives significantly decreased the coefficient of friction (COF) and wear at different contact pressures of steel-steel tribopairs. The influence of contact pressure and load-bearing ability of the polymer-grafted GO as nanolubricants have been examined carefully. The COF of PB particles provided a reduction of 85% (low pressure, ∼0.9 MPa) and 66.65% (high pressure, ∼1.35 GPa) compared to lube paraffin oil and exhibited a lower specific wear rate (2.26 × 10-8 mm3 N-1 m-1) at macrotribological pin/ball-on-disc trials, revealing superior lubricity. The PB containing nanolubricants also exhibited high load-bearing ability (till ∼1000 N load, Pm ∼6.1 GPa) with considerably lower COF and wear, which were investigated using a four-ball tribotester. Among the functionalized polymeric GO particles, PSS polyelectrolyte containing GO-PEI-PSS showed better COF and wear reduction ability with extremely high load-bearing capacity due to the strong interfacial adhesion properties of PSS to generate strong protective synergetic lubricating tribofilm into the rubbing interfaces, which is comprehensively investigated by post-tribological analysis.

Recent Advances in Bioinspired Gel Surfaces with Superwettability and Special Adhesion

Engineering surface wettability is of great importance in academic research and practical applications. The exploration of hydrogel-based natural surfaces with superior properties has revealed new design principles of surface superwettability. Gels are composed of a cross-linked polymer network that traps numerous solvents through weak interactions. The natural fluidity of the trapped solvents confers the liquid-like property to gel surfaces, making them significantly different from solid surfaces. Bioinspired gel surfaces have shown promising applications in diverse fields. This work aims to summarize the fundamental understanding and emerging applications of bioinspired gel surfaces with superwettability and special adhesion. First, several typical hydrogel-based natural surfaces with superwettability and special adhesion are briefly introduced, followed by highlighting the unique properties and design principles of gel-based surfaces. Then, the superwettability and emerging applications of bioinspired gel surfaces, including liquid/liquid separation, antiadhesion of organisms and solids, and fabrication of thin polymer films, are presented in detail. Finally, an outlook on the future development of these novel gel surfaces is also provided.

Wetting Behavior and Tribological Properties of Polymer Brushes on Laser-Textured Surface

Polymer brush layers can act as effective lubricants owing to their low friction and good controllability. However, their application to the field of tribology is limited by their poor wear resistance. This study proposes a strategy combining grafting and surface texturing to extend the service life of polymer brushes. Surface microstructure and chemical composition were measured through scanning electron microscopy (SEM), atomic force microscopy (AFM), and X-ray photoelectron spectroscopy (XPS). Water contact angles were measured to evaluate the surface wettability of the grafted silicon-based surface texture. Results showed the distinct synergistic effect between polymer brushes and laser surface texturing (LST). The prepared polymer brushes on textured surface can be a powerful mechanism for friction reduction properties, which benefit from their strong hydration effect on the lubrication liquid and promote the formation of a local lubricating film. Moreover, the wear life of polymer brushes can be immensely extended, as micro-dimples on the textured surface can effectively protect the polymer brushes. This study presents a method to enhance the load-bearing capacity and wear resistance of the grafted surface of polymer brushes.

Structural Dependence of Salt-Responsive Polyzwitterionic Brushes with an Anti-Polyelectrolyte Effect

Some polyzwitterionic brushes exhibit a strong "anti-polyelectrolyte effect" and ionic specificity that make them versatile platforms to build smart surfaces for many applications. However, the structure-property relationship of zwitterionic polymer brushes still remains to be elucidated. Herein, we aim to study the structure-dependent relationship between different zwitterionic polymers and the anti-polyelectrolyte effect. To this end, a series of polyzwitterionic brushes with different cationic moieties (e.g., imidazolium, ammonium, and pyridinium) in their monomeric units and with different carbon spacer lengths (e.g., CSL = 1, 3, and 4) between the cation and anion were designed and synthesized to form polymer brushes via the surface-initiated atom transfer radical polymerization. All zwitterionic brushes were carefully characterized for their surface morphologies, compositions, wettability, and film thicknesses by atomic force microscopy, contact angle measurement, and ellipsometry, respectively. The salt-responsiveness of all zwitterionic brushes to surface hydration and friction was further examined and compared both in water and in salt solutions with different salt concentrations and counterion types. The collective data showed that zwitterionic brushes with different cationic moieties and shorter CSLs in salt solution induced higher surface friction and lower surface hydration than those in water, exhibiting strong anti-polyelectrolyte effect salt-responsive behaviors. By tuning the CSLs, cationic moieties, and salt concentrations and types, the surface wettability can be changed from a highly hydrophobic surface (∼60°) to a highly hydrophilic surface (∼9°), while interfacial friction can be changed from ultrahigh friction (μ ≈ 4.5) to superior lubrication (μ ≈ 10^-3). This work provides important structural insights into how subtle structural changes in zwitterionic polymers can yield great changes in the salt-responsive properties at the interface, which could be used for the development of smart surfaces for different applications.

Electroassisted Functionalization of Nitinol Surface, a Powerful Strategy for Polymer Coating through Controlled Radical Surface Initiation

Coating Nitinol (NiTi) surfaces with a polymer layer has become very appealing in the past few years owing to its increased attraction in the biomedical field. Although its intrinsic properties helped ensure its popularity, its extensive implementation is still hampered by its nickel inclusion, making it sensitive to pitting corrosion and therefore leading to the release of carcinogenic Ni²⁺ ions. Among all recent ways to modify NiTi surfaces, elaboration of self-assembled monolayers is of great interest as their high order confers a reinforcement of the metal surface corrosion resistance and brings new functionalities to the metal for postmodification processes. In this work, we compare the electroassisted and thermally assisted self-assembling of 11-(2-bromoisobutyrate)-undecyl-1-phosphonic acid (BUPA) to the classical immersion process on NiTi surfaces initially submitted to a hydrothermal treatment. Among all tested conditions, the electroassisted grafting of BUPA at room temperature appears to be the most promising alternative, as it allows grafting in very short times (5-10 min), thus preventing its degradation. The thus-formed layer has been proven to be sufficient to enable the surface-initiated atom transfer radical polymerization (SI-ATRP) of 2-(dimethylamino)ethyl methacrylate.

Surface-Initiated Controlled Radical Polymerization: State-of-the-Art, Opportunities, and Challenges in Surface and Interface Engineering with Polymer Brushes

The generation of polymer brushes by surface-initiated controlled radical polymerization (SI-CRP) techniques has become a powerful approach to tailor the chemical and physical properties of interfaces and has given rise to great advances in surface and interface engineering. Polymer brushes are defined as thin polymer films in which the individual polymer chains are tethered by one chain end to a solid interface. Significant advances have been made over the past years in the field of polymer brushes. This includes novel developments in SI-CRP, as well as the emergence of novel applications such as catalysis, electronics, nanomaterial synthesis and biosensing. Additionally, polymer brushes prepared via SI-CRP have been utilized to modify the surface of novel substrates such as natural fibers, polymer nanofibers, mesoporous materials, graphene, viruses and protein nanoparticles. The last years have also seen exciting advances in the chemical and physical characterization of polymer brushes, as well as an ever increasing set of computational and simulation tools that allow understanding and predictions of these surface-grafted polymer architectures. The aim of this contribution is to provide a comprehensive review that critically assesses recent advances in the field and highlights the opportunities and challenges for future work.