Restricted and epitaxial growth of MnO2-x nano-flowers in/out carbon nanofibers for long-term cycling stability supercapacitor electrodes

Carbon nanofibers (CFs) have been widely applied as electrodes for energy storage devices owing to the features of increased contact area between electrodes and electrolyte, and shortened transmission route of electrons. However, the poor electrochemical activity and severe waste of space hinder their further application as supercapacitors electrodes. In this work, MnO2-x nanoflowers restricted and epitaxial growth in/out carbon nanofibers (MnO2/MnO@CF) were prepared as excellent electrode materials for supercapacitors. With the synergistic effect of uniquely designed structure and the introduction of MnO and MnO2 nanoflowers, the prepared interconnected MnO2/MnO@CF electrodes demonstrated satisfactory electrochemical performance. Furthermore, the MnO2/MnO@CF//activated carbon (AC) asymmetric supercapacitor offered an outstanding long-term cycle stability. Besides, kinetic analysis of MnO2/MnO@CF-90 was conducted and the diffusion-dominated storage mechanism was well-revealed. This concept of "internal and external simultaneous decoration" with different valence states of manganese oxides was proven to improve the electrochemical performance of carbon nanofibers, which could be generalized to the preparation and performance improvement of other fiber-based electrodes.

Microwave-Assisted Rational Designed CNT-Mn3 O4 /CoWO4 Hybrid Nanocomposites for High Performance Battery-Supercapacitor Hybrid Device

Extensive research interest in hybrid battery-supercapacitor (BSH) devices have led to the development of cathode materials with excellent comprehensive electrochemical properties. In this work, carbon nanotube (CNT)-Mn3 O4 /CoWO4 triple-segment hybrid electrode is synthesized by using a two-step microwave-assisted hydrothermal route. Systematic physical characterization revealed that, with the assistance of microwave, granular Mn3 O4 and spheroid-like CoWO4 with preferred orientation, and oxygen vacancies are stacked or arranged on CNTs skeletons to construct a rational designed hybrid nanocomposite with abundant heterointerfaces and interfacial chemical bonds. Electrochemical evaluations show that the synergistic cooperation in CNT-Mn3 O4 /CoWO4 resulted in an ultra-high specific capacity (1907.5 C g-1 /529.8 mA h g-1 at 1 A g-1 ), a wide operating voltage window (1.15 V), the satisfactory rate capability (capacity maintained at 1016.5 C g-1 /282.3 mA h g-1 at 15 A g-1 ), and excellent cycling stability (117.2% initial capacity retention after 13000 cycles at 15 A g-1 ). In addition, the assembled CNT-Mn3 O4 /CoWO4 //N doped porous carbon (NC) BSH device delivered a stable working voltage of 2.05 V and superior energy density of 67.5 Wh kg-1 at power density of 1025 W kg-1 , as well as excellent stability (92.2% capacity retained at 5 A g-1 for 12600 cycles). This work provides a new and feasible tactic to develop high-performance transition metal oxide-based cathodes for advanced BSH devices.

Nanoengineering of NiO/MnO2/GO Ternary Composite for Use in High-Energy Storage Asymmetric Supercapacitor and Oxygen Evolution Reaction (OER)

Designing multifunctional nanomaterials for high performing electrochemical energy conversion and storage devices has been very challenging. A number of strategies have been reported to introduce multifunctionality in electrode/catalyst materials including alloying, doping, nanostructuring, compositing, etc. Here, we report the fabrication of a reduced graphene oxide (rGO)-based ternary composite NiO/MnO₂/rGO (NMGO) having a range of active sites for enhanced electrochemical activity. The resultant sandwich structure consisted of a mesoporous backbone with NiO and MnO₂ nanoparticles encapsulated between successive rGO layers, having different active sites in the form of Ni-, Mn-, and C-based species. The modified structure exhibited high conductivity owing to the presence of rGO, excellent charge storage capacity of 402 F·g^-1 at a current density of 1 A·g^-1, and stability with a capacitance retention of ~93% after 14,000 cycles. Moreover, the NMGO//MWCNT asymmetric device, assembled with NMGO and multi-wall carbon nanotubes (MWCNTs) as positive and negative electrodes, respectively, exhibited good energy density (28 Wh·kg^-1), excellent power density (750 W·kg^-1), and capacitance retention (88%) after 6000 cycles. To evaluate the multifunctionality of the modified nanostructure, the NMGO was also tested for its oxygen evolution reaction (OER) activity. The NMGO delivered a current density of 10 mA·cm^-2 at the potential of 1.59 V versus RHE. These results clearly demonstrate high activity of the modified electrode with strong future potential.

A, Choe Y. A novel β-MnO2 and carbon nanotube composite with potent electrochemical properties synthesized using a microwave-assisted method for use in supercapacitor electrodes

In this work, we report the synthesis of a novel β-MnO2/CNT nanocomposite with good electrical conductivity for high-performance supercapacitors via a microwave-assisted method.

Fast and Scalable Hydrodynamic Synthesis of MnO2/Defect-Free Graphene Nanocomposites with High Rate Capability and Long Cycle Life

The integration of metal oxides and carbon materials provides a great potential for enhancing the high energy and power densities of supercapacitors, but the rational design and scalable fabrication of such composite materials still remain a challenge. Herein, we report a fast, scalable, and one-pot hydrodynamic synthesis for preparing ion conductive and defect-free graphene from graphite and MnO₂/graphene nanocomposites. The use of this hydrodynamic method using Taylor-Couette flow allows us to efficiently fast shear-exfoliate graphite into large quantities of high-quality graphene sheets. Deposition of MnO₂ on graphene is subsequently performed in a fluidic reactor within 10 min. The prepared MnO₂/graphene nanocomposite shows outstanding electrochemical performances, such as a high specific capacitance of 679 F/g at 25 mV/s, a high rate capability of 74.7% retention at an extremely high rate of 1000 mV/s, and an excellent cycling characteristic (∼94.7% retention over 20 000 cycles). An asymmetric supercapacitor device is fabricated by assembling an anode of graphene and a cathode of MnO₂/graphene, which resulted in high energy (35.2 W h/kg) and power (7.4 kW/kg) densities (accounting for the mass of both electrodes and the electrolyte) with a high rate capability and long cycle life.

Application of octanohydroxamic acid for liquid-liquid extraction of manganese oxides and fabrication of supercapacitor electrodes

MnO₂ and Mn₃O₄ particles were prepared by wet chemical methods and efficiently dispersed and mixed with multiwalled carbon nanotubes (MWCNT) for the fabrication of composite MnO₂-MWCNT and Mn₃O₄-MWCNT electrodes for electrochemical supercapacitors (ES). The problem of particle agglomeration was addressed by particle extraction through a liquid-liquid interface (PELLI) using octanohydroxamic acid (OHA) as a new extractor. OHA exhibited remarkable adsorption on particles due to a bidentate bonding mechanism. The use of OHA broadened the application of PELLI technology, because it allowed good extraction of particles from an aqueous phase at high pH. Moreover, OHA allowed efficient extraction by strong adsorption on particles not only at the liquid-liquid interface, but also in the bulk of an aqueous phase. Building on the advantages offered by the PELLI method and OHA as an extractor we found that Mn₃O₄-MWCNT electrodes exhibited a remarkably high capacitance of 4.2F cm^-2. Another major finding was that capacitance of Mn₃O₄-MWCNT electrodes was higher than that of MnO₂-MWCNT electrodes at active mass of 33 mg cm^-2. This finding showed processing advantages of PELLI and paved the way for applications of novel colloidal and surface modification strategies for the development of advanced ES. A conceptually new approach has been proposed based on the use of hydroxamic acids as capping agents for synthesis and extractor molecules for PELLI.

Asymmetric Supercapacitor Electrodes and Devices

The world is recently witnessing an explosive development of novel electronic and optoelectronic devices that demand more-reliable power sources that combine higher energy density and longer-term durability. Supercapacitors have become one of the most promising energy-storage systems, as they present multifold advantages of high power density, fast charging-discharging, and long cyclic stability. However, the intrinsically low energy density inherent to traditional supercapacitors severely limits their widespread applications, triggering researchers to explore new types of supercapacitors with improved performance. Asymmetric supercapacitors (ASCs) assembled using two dissimilar electrode materials offer a distinct advantage of wide operational voltage window, and thereby significantly enhance the energy density. Recent progress made in the field of ASCs is critically reviewed, with the main focus on an extensive survey of the materials developed for ASC electrodes, as well as covering the progress made in the fabrication of ASC devices over the last few decades. Current challenges and a future outlook of the field of ASCs are also discussed.

MnO2 Nanowire/Biomass-Derived Carbon from Hemp Stem for High-Performance Supercapacitors

Hierarchical 3D nanostructures based on waste biomass are being offered as promising materials for energy storage due to their processabilities, multifunctionalities, environmental benignities, and low cost. Here we report a facile, inexpensive, and scalable strategy for the fabrication of hierarchical porous 3D structure as electrode materials for supercapacitors based on MnO₂ nanowires and hemp-derived activated carbon (HC). Vertical MnO₂ wires are uniformly deposited onto the surface of HC using a one-step hydrothermal method to produce hierarchical porous structures with conductive interconnected 3D networks. HC acts as a near-ideal 3D current collector and anchors electroactive materials, and this confers a specific capacitance of 340 F g^-1 at 1 A g^-1 with a high rate capability (88% retention) of the 3D MnO₂/HC composite because of its open-pore system, which facilitates ion and electron transports and synergistic contribution of two energy-storage materials. Moreover, asymmetric supercapacitors fabricated using 3D HC as the anode and 3D MnO₂/HC as the cathode are able to store 33.3 Wh kg^-1 of energy and have a power delivery of 14.8 kW kg^-1.