Exploring the fluorescence properties of tellurium-containing molecules and their advanced applications

This review article explores the fascinating realm of fluorescence using organochalcogen molecules, with a particular emphasis on tellurium (Te). The discussion encompasses the underlying mechanisms, structural motifs influencing fluorescence, and the applications of these intriguing phenomena. This review not only elucidates the current state of knowledge but also identifies avenues for future research, thereby serving as a valuable resource for researchers and enthusiasts in the field of fluorescence chemistry with a focus on Te-based molecules. By highlighting challenges and prospects, this review sparks a conversation on the transformative potential of Te-containing compounds across different fields, ranging from environmental solutions to healthcare and materials science applications. This review aims to provide a comprehensive understanding of the distinct fluorescence behaviors exhibited by Te-containing compounds, contributing valuable insights to the evolving landscape of chalcogen-based fluorescence research.

Selenium-Based Fluorescence Probes for the Detection of Bioactive Molecules

Chemistry of organoselenium reagents have now become an important tool of synthetic organic and medicinal chemistry. These reagents activate the olefinic double bonds and used to archive the number of organic transformations under mild reaction conditions. A number of organoselenium compounds have been identified as potent oxidants. Recently, various organoselenium species have been employed as chemical sensors for detecting toxic metals. Moreover, a number of selenium-based fluorescent probes have been developed for detecting harmful peroxides and ROS. In this review article, the synthesis of selenium-based fluorescent probes will be covered including their application in the detection of toxic metals and harmful peroxides including ROS.

An efficient chemodosimeter for the detection of Hg(II) via diselenide oxidation

Mercury ions are toxic and exhibit hazardous effects on the environment and biological systems, and thus demand for the selective and sensitive detection of mercury has become considerably an important issue. Here, we have developed a diselenide containing coumarin-based probe 3 for the selective detection of Hg(II) with a "turn-on" response (a 48 fold increase in fluorescence intensity) at 438 nm. The probe could quantitatively detect Hg(II) with a detection limit of 1.32 μM in PBS solution. Moreover, the probe has operable efficiency over the physiological range with an increase in the quantum yield from 1.2% to 57.3%. The reaction of the probe with Hg(II) yielded a novel monoselenide based coumarin 4via diselenide oxidation, which was confirmed by single crystal XRD. Furthermore, the biological use of the probe for the detection of Hg(II) was confirmed in the MCF-7 cell line. To the best of our knowledge, this is the first reaction-based probe for Hg(II) via diselenide oxidation.

Discussions of Fluorescence in Selenium Chemistry: Recently Reported Probes, Particles, and a Clearer Biological Knowledge

In this review from literature appearing over about the past 5 years, we focus on selected selenide reports and related chemistry; we aimed for a digestible, relevant, review intended to be usefully interconnected within the realm of fluorescence and selenium chemistry. Tellurium is mentioned where relevant. Topics include selenium in physics and surfaces, nanoscience, sensing and fluorescence, quantum dots and nanoparticles, Au and oxide nanoparticles quantum dot based, coatings and catalyst poisons, thin film, and aspects of solar energy conversion. Chemosensing is covered, whether small molecule or nanoparticle based, relating to metal ion analytes, H2S, as well as analyte sulfane (biothiols-including glutathione). We cover recent reports of probing and fluorescence when they deal with redox biology aspects. Selenium in therapeutics, medicinal chemistry and skeleton cores is covered. Selenium serves as a constituent for some small molecule sensors and probes. Typically, the selenium is part of the reactive, or active site of the probe; in other cases, it is featured as the analyte, either as a reduced or oxidized form of selenium. Free radicals and ROS are also mentioned; aggregation strategies are treated in some places. Also, the relationship between reduced selenium and oxidized selenium is developed.

Photoexcited molecular probes for selective and revertible imaging of cellular reactive oxygen species

Redox homeostasis is key to maintaining the normal physiological status of living cells.

Novel Platinum(II) Complex-based Luminescent Probe for Detection of Hypochlorite in Cancer Cells

Hypochlorite (ClO⁻) is of great importance either for the metabolism of living organisms or as disinfectant in daily life. However, improper concentration levels of ClO⁻ lead to serious health problems including erythrocyte damage, cardiovascular problems, neuron degeneration, lung/kidney injury and cancer. Therefore, a sensitive and selective detection method is required for the visualization and measurement of ClO⁻. In this work, a novel platinum(II) complex-based luminescent probe Pt-CHO was synthesized and utilized to detect ClO⁻. This "turn-off" probe exhibits high sensitivity, excellent selectivity, good pH stability, low limit of detection and instantaneous response ability. Moreover, the luminescent response is caused by the oxidation of aldehyde into carboxyl groups combined with the coordination of hydroxyl groups at the Pt center, which is rarely reported. The cell imaging of HeLa cells proved the considerable potential of the probe for ClO⁻ imaging in living cells.

BODIPY-based selenides as fluorescent probes for rapid, sensitive and mitochondria-specific detection of hypochlorous acid

Hypochlorous acid (HClO) is a powerful microbicidal agent in the innate immue system; however, abnormal HClO levels can cause tissue damage and many diseases. Thus, it is vitally important to develop facile, rapid and accurate analytical methods for the detection of HClO/ClO^-in vitro and in vivo. In this work, we have constructed three meso-substituted BODIPY selenides with different hydrocarbyl groups (ethyl for BSe-Et, benzyl for BSe-Bz and phenyl for BSe-Ph) as fluorescent probes for the detection of HClO/ClO^-. All three non-fluorescent probes can sense HClO/ClO^- to form fluorescent selenoxides by blocking the photo-induced electron transfer process. Their sensing properties display a clear relationship with the structure of the hydrocarbyl. The sensing reactivity is heavily dependent on the electron-donating ability of hydrocarbyls, with the order of the response time as BSe-Et (2 s) < BSe-Bz (5 s) ≪ BSe-Ph (>100 s). Both BSe-Et and BSe-Bz afford a large fluorescence response and very low detection limits (0.3 nM and 0.8 nM), and BSe-Bz displays a higher selectivity over BSe-Et. Finally, as a representative, BSe-Bz was successfully applied to the detection of exo- and endogenous HClO in living cells, and demonstrated to be a mitochondria-localized fluorescent probe.

Imaging of Hypochlorous Acid by Fluorescence and Applications in Biological Systems

In recent decades, HOCl research has attracted a lot of scientists from around the world. This chemical species is well known as an important player in the biological systems of eukaryotic organisms including humans. In the human body, HOCl is produced by the myeloperoxidase enzyme from superoxide in very low concentrations (20 to 400 μm); this species is secreted by neutrophils and monocytes to help fight pathogens. However, in the condition called "oxidative stress", HOCl has the capability to attack many important biomolecules such as amino acids, proteins, nucleotides, nucleic acids, carbohydrates, and lipids; these reactions could ultimately contribute to a number of diseases such as neurodegenerative diseases (AD, PD, and ALS), cardiovascular diseases, and diabetes. In this review, we discuss recent efforts by scientists to synthesize various fluorophores which are attached to receptors to detect HOCl such as: chalcogen-based oxidation, oxidation of 4-methoxyphenol, oxime/imine, lactone ring opening, and hydrazine. These synthetic molecules, involving rational synthetic pathways, allow us to chemoselectively target HOCl and to study the level of HOCl selectivity through emission responses. Virtually all the reports here deal with well-defined and small synthetic molecular systems. A large number of published compounds have been reported over the past years; this growing field has given scientists new insights regarding the design of the chemosensors. Reversibility, for example is considered important from the stand point of chemosensor reuse within the biological system; facile regenerability using secondary analytes to obtain the initial probe is a very promising avenue. Another aspect which is also important is the energy of the emission wavelength of the sensor; near-infrared (NIR) emission is favorable to prevent autofluorescence and harmful irradiation of tissue; thus, extended applicability of such sensors can be made to the mouse model or animal model to help image internal organs. In this review, we describe several well-known types of receptors that are covalently attached to the fluorophore to detect HOCl. We also discuss the common fluorophores which are used by chemist to detect HOCl, Apart from the chemical aspects, we also discuss the capabilities of the compounds to detect HOCl in living cells as measured through confocal imaging. The growing insight from HOCl probing suggests that there is still much room for improvement regarding the available molecular designs, knowledge of interplay between analytes, biological applicability, biological targeting, and chemical switching, which can also serve to further sensor and theurapeutic agent development alike.

A Hemicyanine-Embedded Diphenylselenide-Containing Probe "HemiSe" in which SePh2 Stays Reduced for Selective Detection of Superoxide in Living Cells

A simple one-step synthesis of fluorescent probe HemiSe has been developed for the detection of superoxide (O₂ ^.- ). The probe undergoes reaction specifically with O₂ ^.- when in the presence of other competitive ROS/RNS/metal ions. The diphenylselenide was incorporated to completely quench the fluorescence of the hemicyanine unit through the action of a photoinduced electron transfer (PET) photomechanism. However, after the addition of O₂ ^.- , the latent fluorophore regains its fluorescence owing to the reaction at the C=C bond of the hemicyanine with O₂ ^.- through nucleophilic attack; the increase in blue emission is due to a reaction of the double bond within HemiSe followed by an increase in fluorescence quantum yield (Φ) up to 0.45; the limit of detection (LOD) is 11.9 nm. A time-dependent study shows that HemiSe can detect superoxide within 13 min with high sensitivity, high selectivity, over a wide pH range, and through confirmation with a xanthine/xanthine oxidase biochemical assay (λ_em =439 nm). A study in the RAW 264.7 macrophage living cells also shows that HemiSe is not toxic, cell permeable (experimental log P=2.11); confocal imaging results show that HemiSe can detect O₂ ^.- in endogenous and exogeneous systems.

Overriding Phthalate Decomposition When Exploring Mycophenolic Acid Intermediates as Selenium-Based ROS Biological Probes

Hypochlorous (OCl^-) acid is the most well-known bacterial oxidant to be produced by neutrophils. Excess amounts of OCl^- can cause various disorders in living systems. Herein, we have designed, synthesized, and characterized two novel organoselenium-based target molecules (Probe-1 and Probe-OCl) based on a synthetic intermediate of mycophenolic acid for the aqueous detection of OCl^-. Probe 1 has been recently reported (Org. Lett. 2018, 20, 3557-3561); both probes show immediate "turn-on" fluorescence (<1 s) upon the addition of OCl^-, display an increase in the fluorescence quantum yield (3.7-fold in Probe-1 and 11.6-fold in Probe-OCl), and are completely soluble in aqueous media without the help of any cosolvent. However, a decrease in the "turn-on" intensity with the oxidized version of Probe-1 in cell assays due to the anhydride/phthalate functionality suggests that probe degradation occurs based on hydrolytic action (a probe degradation half-life of ∼1500 s at 15 μM Probe-1 and 150 μM OCl). Thus, the change of "anhydride" to "methylamide" begets Probe-OCl, which possesses more stability without sacrificing its water solubility properties and responses at short times. Further studies suggest that Probe-OCl is highly stable within physiological pH (pH = 7.4). Surprisingly, in live cell experiments involving U-2 OS cells and HeLa cells, Probe-OCl accumulated and aggregated in lipid droplets and gives a "turn-on" fluorescence response. 3-(4,5-Dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide assays confirmed that Probe-OCl is not toxic. Cuvette aggregation studies were also performed (tetrahydrofuran/H₂O) to demonstrate aggregation-induced fluorescence at longer times. Our current hypothesis is that the "turn-on" fluorescence effect is caused by the aggregation-induced emission mechanism available for Probe-OCl. In this case, in tandem, we reanalyzed the Mes-BOD-SePh derivative to compare and contrast cell localization as imaged by confocal microscopy; fluorescence emission occurs in the absence of, or prior to, Se oxidation.

Colorimetric Determination of Hypochlorite Based on the Oxidative Leaching of Gold Nanorods

Hypochlorite plays a critical role in killing microorganisms in the water. However, it can also cause cardiovascular diseases, neuron degeneration, and cancer to humans. Although traditional methods feature excellent sensitivity and reliability in detecting hypochlorite, the expensive instruments and strict determination conditions have limited their application in environmental analysis to some extent. Thus, it is necessary and urgent to propose a cheap, facile, and quick analytical assay for hypochlorite. This paper proposes a colorimetric assay for hypochlorite utilizing gold nanorods (AuNRs) as the nanoreactor and color reader. The AuNRs were acquired via a reported seed-mediated method. NaClO with strong oxidation property can cause the etching of gold from the longitudinal tips of AuNRs, which could shorten the aspect ratio of AuNRs, decrease the absorption in the UV–Vis spectrum and also induce the solution color changing from red to pale yellow. Thus, according to the solution color change and the absorbance of longitudinal surface plasmon resonance of AuNRs, we established the calibration curve of NaClO within 0.08 μM to 125 μM (∆Abs = 0.0547 + 0.004 C_NaClO, R² = 0.9631). Compared to traditional method, we obtained the conversion formula between the concentration of residual-chlorine in tap water and the concentration of hypochlorite detected by the proposed colorimetric assay, which is C_{residual-chlorine} = 0.24 C_NaClO. Finally, the real application of the colorimetric assay in tap water was successfully performed, and the accuracy of the colorimetric method can reach from −6.78% to +8.53%.

A new class of silica-supported chromo-fluorogenic chemosensors for anion recognition based on a selenourea scaffold

The first example of a chemosensor (L) containing a selenourea moiety is described here. L is able to colorimetrically sense the presence of CN^- and S^2- in H₂O : MeCN (75 : 25, v/v). Moreover, when L is loaded into functionalised mesoporous silica nanoparticles an increase in the selectivity towards S^2- occurs via a selective fluorescence response.

Novel intramolecular π-π-interaction in a BODIPY system by oxidation of a single selenium center: geometrical stamping and spectroscopic and spectrometric distinctions

A new BODIPY system displaying an intramolecular π-π-interaction was synthesized and studied. When the selenium center was oxidized, the substituted phenyl group undergoes π-π stacking with one side of the BODIPY core. The oxidized form showed, not only a down-field shift in the NMR peak, but also splitting due to geometrical changes that arise when going from C_s to C₁. The compound was characterized by X-ray diffraction; DFT methods helped elucidate the influence of the unexpected π-π stack and its connection to the photophysical properties imparted by the Se oxidation.

A novel fluorescent probe for imaging the process of HOCl oxidation and Cys/Hcy reduction in living cells

A new on-off-on fluorescent probe, CMOS, based on coumarin was developed to detect the process of hypochlorous acid (HOCl) oxidative stress and cysteine/homocysteine (Cys/Hcy) reduction. The probe exhibited a fast response, good sensitivity and selectivity. Moreover, it was applied for monitoring the redox process in living cells.

A new on–off–on fluorescent probe, CMOS, was designed and applied to detect the process of HOCl oxidation and Cys/Hcy reduction.