Scaling up of dual-chamber microbial electrochemical systems - An appraisal using systems design approach

Impetus to minimise the energy and carbon footprints of evolving wastewater resource recovery facilities has promoted the development of microbial electrochemical systems (MES) as an emerging energy-neutral and sustainable platform technology. Using separators in dual-chamber MES to isolate anodic and cathodic environments creates endless opportunities for its myriad applications. Nevertheless, the high internal resistance and the complex interdependencies among various system factors have challenged its scale-up. This critical review employed a systems approach to examine the complex interdependencies and practical issues surrounding the implementation and scalability of dual-chamber MES, where the anodic and cathodic reactions are mutually appraised to improve the overall system efficiency. The robustness and stability of anodic biofilms in large-volume MES is dependent on its inoculum source, antecedent history and enrichment strategies. The composition and anode-respiring activity of these biofilms are modulated by the anolyte composition, while their performance demands a delicate balance between the electrode size, macrostructure and the availability of substrates, buffers and nutrients when using real wastewater as anolyte. Additionally, the catholyte governed the reduction environment and associated energy consumption of MES with scalable electrocatalysts needed to enhance the sluggish reaction kinetics for energy-efficient resource recovery. A comprehensive assessment of the dual-chamber reactor configuration revealed that the tubular, spiral-wound, or plug-in modular MES configurations are suitable for pilot-scale, where it could be designed more effectively using efficient electrode macrostructure, suitable membranes and bespoke strategies for continuous operation to maximise their performance. It is anticipated that the critical and analytical understanding gained through this review will support the continuous development and scaling-up of dual-chamber MES for prospective energy-neutral treatment of wastewater and simultaneous circular management of highly relevant environmental resources.

Efficient utilization of photoelectron-hole at semiconductor-microbe interface for pyridine degradation with assistance of external electric field

In this study, enhanced pyridine bio-photodegradation with assistance of electricity was achieved. Meanwhile, photoelectron-hole played a vital role in accelerating pyridine biomineralization. The significant separation of photoelectron-hole was achieved with an external electric field, which provided sufficient electron donors and acceptors for pyridine biodegradation. The enhanced electron transport system activity also revealed the full utilization of photoelectron-hole by microbes at semiconductor-microbe interface with assistance of electricity. Microbial community analysis confirmed the enrichment of functional species related to pyridine biodegradation and electron transfer. Microbial function analysis and microbial co-occurrence networks analysis indicated that upregulated functional genes and positive interactions of different species were the important reasons for enhanced pyridine bio-photodegradation with external electric field. A possible mechanism of enhanced pyridine biodegradation was proposed, i.e., more photoelectrons and holes of semiconductors were utilized by microbes to accelerate reduction and oxidation of pyridine with the assistance of electrical stimulation. The excellent performance of the photoelectrical biodegradation system showed a potential alternative for recalcitrant organic wastewater treatment.

Current advances in microbial fuel cell technology toward removal of organic contaminants - A review

At present, water pollution and demand for clean energy are most pressing global issues. On a daily basis, huge quantity of organic wastes gets released into the water ecosystems, causing health related problems. The need-of-the-hour is to utilize proficient and cheaper techniques for complete removal of harmful organic contaminants from water. In this regard, microbial fuel cell (MFC) has emerged as a promising technique, which can produce useful electrical energy from organic wastes and decontaminate polluted water. Herein, we have systematically reviewed recently published results, observations and progress made on the applications of MFCs in degradation of organic contaminants, including organic synthetic dyes, agro pollutants, health care contaminants and other organics (such as phenols and their derivatives, polyhydrocarbons and caffeine). MFC-based hybrid technologies, including MFC-constructed wetland, MFC-photocatalysis, MFC-catalysis, MFC-Fenton process, etc., developed to obtain high removal efficiency and bioelectricity production simultaneously have been discussed. Further, this review assessed the influence of factors, such as nature of electrode catalysts, organic pollutants, electrolyte, microbes and operational conditions, on the performance of pristine and hybrid MFC reactors in terms of pollutant removal efficiency and power generation simultaneously. Moreover, the limitations and future research directions of MFCs for wastewater treatment have been discussed. Finally, a conclusive summary of the findings has been outlined.

Effects of Low Frequency-Low Voltage Alternating Electric Current on Apoptosis Progression in Bioelectrical Reactor Biofilm

Bioelectrochemical systems have undergone several modifications to promote the enzymes or pathways used to reduce the energy required for microbial metabolism. Changes in dominant bacteria, population, and growth rates occur when an electric current is applied intermittently. Applying electricity to bioelectrical reactor (BER) biofilms can either stimulate cells or lead to cell death; therefore, determining the applied voltage range that leads to viable and stimulated bacteria is crucial. We investigated the progression of apoptosis induced by a low frequency-low voltage alternating electric current (AC) in a BER biofilm and found that biofilms on carbon cloth (CC) and stainless steel (SS) 304 electrodes had pH_zpc values of 8.67. The pH_zpc of the biofilms increased by two compared to that of the inoculant bacteria mass. Furthermore, the Henderson–Hasselbalch equation reveals that the compositions of cell walls of the biofilms that formed on the CC and SS304 electrodes are very similar. In contrast, the CC and SS304 biofilms differ from the inoculant biomass without the influence of an AC field; this indicates that there are differences in the compositions of the cell walls in the present bacteria. Fourier transform infrared spectroscopy was used to compare spectra of the biofilms with that of the inoculation mass, and there were differences in shape and absorbance intensity, indicating variability in the composition, and quantity of each individual biofilm component. In addition, the dehydrogenase activity (DHA) content varied under different applied voltages; the highest DHA was obtained at 8 Vpp. A flow cytometry analysis showed a relatively low number of apoptotic cells (10.93 ± 5.19%) for the AC amplitudes studied. Thus, a low voltage-low frequency AC likely induces significant changes in bacterial metabolic activity but causes no significant change in their viability.

Enhancement of fipronil degradation with eliminating its toxicity in a microbial fuel cell and the catabolic versatility of anodic biofilm

The degradation of fipronil was investigated in microbial fuel cells (MFCs). Almost 79% of 30 mg/L fipronil was rapidly degraded within 12 h by MFC biofilm. Based on the constructed quadratic polynomial model, a maximum fipronil degradation rate of 94.22% could be theoretically achieved at pH of 7.01, 33.39 °C, and the initial fipronil concentration 74 mg/L after incubation for 72 h. The high acute toxicity of fipronil toward zebrafish was largely eliminated after degradation by the MFC. In addition, the MFC biofilm showed catabolic versatility to 4-chloronitrobenzene, sulfanilamide, fluoroglycofen, and azoxystrobin. The microbial community analysis revealed that the functional bacteria Sphaerochaeta, Pseudomonas, Azospirillum, Azoarcus, and Chryseobacterium were major predominant bacteria in the anodic biofilm. Therefore, the MFC offers a promising approach in treating the environmental contaminants due to its abilities of energy capture from waste substances and catabolic versatility to different organic compounds.

Efficient reduction of nitrobenzene by sulfate-reducer enriched biocathode in microbial electrolysis cell

This study aimed to enhance treatment of wastewater containing nitrobenzene (NB) and sulfate using biocathode enriched with sulfate-reducing bacteria in microbial electrolysis cell (MEC). Artificial wastewater with 50 mg L^-1 NB and 200 mg L^-1 sulfate was used as the catholyte. With 0.8 V applied voltage, removal efficiencies of NB and sulfate reached 98% and 34%, respectively, within 36 h. Aniline and sulfide were the main reductive products in the catholyte with concentrations increased to 0.32 and 0.51 mM, which accounted for 97% and 78% of the removed NB and sulfate, respectively. Sulfate-reducer Desulfovibrio sp. and Wolinella sp. played the dominant role in the biocathode for the reductions of sulfate and NB. Analyses of scanning electron microscope and X-ray photoelectron spectroscopy showed the formation of elemental S on the biocathode surface. The relative abundance of sulfur-oxidizing bacterium Thioclava sp. reached 24% on the biocathode. The results indicated that the oxidation process from S^2- to S⁰ occurred on the biocathode, which provided electrons to biofilm for NB reduction. The MEC with sulfate-reducer enriched biocathode can be used as an alternative to treat complex wastewater containing NB and sulfate.

A loop of catholyte effluent feeding to bioanodes for complete recovery of Sn, Fe, and Cu with simultaneous treatment of the co-present organics in microbial fuel cells

A loop of catholyte effluent feeding to the bioanodes of air-cathode microbial fuel cells (MFCs) achieved complete recovery of mixed Sn(II), Fe(II) and Cu(II), with simultaneous treatment of the co-present organics in synthetic wastewater of printed circuit boards (PrCBs). This in-situ utilization of caustic in the cathodes and the neutralization of acid in the anodes achieved superior metal recovery performance at an optimal hydraulic retention time (HRT) of 24 h. Cathode chambers primarily removed Sn of 91 ± 4% (bottom: 74 ± 3%; electrode: 17 ± 1%), Fe of 89 ± 8% (bottom: 64 ± 4%; electrode: 25 ± 2%), and Cu of 92 ± 7% (electrode: 63 ± 5%; bottom: 29 ± 1%), compared to Sn of 9 ± 3% (electrode: 7 ± 1%; bottom: 2 ± 1%), Fe of 9 ± 3% (electrode: 8 ± 3%; bottom: 1 ± 0%), and Cu of 7 ± 3% (electrode: 4 ± 1%; bottom: 3 ± 1%) in the bioanodes. Bacterial communities on the anodes were well evolutionarily developed after the feeding of catholyte effluent, with the increase in abundance of Rhodopseudomonas and Geobacter, and the shift from Thiobacillus and Acinetobacter to Pseudomonas, Comamonas, Aeromonas and Azospira. This loop of cathodic effluent feeding to the bioanodes of MFCs may represent a unique method for complete metal recovery with simultaneous extraction of renewable electrical energy from the co-present organics. This study also offers new insights into the development of compact microbial electro-metallurgical processes for simultaneous recovery of value-added products from PrCBs processing wastewaters and accomplishing the national wastewater discharge standard for both metals and organics.

Simultaneous efficient removal of oxyfluorfen with electricity generation in a microbial fuel cell and its microbial community analysis

The performance of a microbial fuel cell (MFC) to degrade oxyfluorfen was investigated. Approximately 77% of 50 mg/L oxyfluorfen was degraded within 24 h by anodic biofilm. The temperature, pH, and initial oxyfluorfen concentration had a significant effect on oxyfluorfen degrading, and a maximum degradation rate of 94.95% could theoretically be achieved at 31.96 °C, a pH of 7.65, and an initial oxyfluorfen concentration of 120.05 mg/L. Oxyfluorfen was further catabolized through various microbial metabolism pathways. Moreover, the anodic biofilm exhibited multiple catabolic capacities to 4-nitrophenol, chloramphenicol, pyraclostrobin, and sulfamethoxazole. Microbial community analysis indicated that functional bacteria Arcobacter, Acinetobacter, Azospirillum, Azonexus, and Comamonas were the predominant genera in the anodic biofilm. In terms of the efficient removal of various organic compounds and energy recovery, the MFC seemed to be a promising approach for the treatment of environmental contaminants.