Hydrophobic soot nanoparticles as a non-cytotoxic motility activator of human spermatozoa

Sperm cryopreservation is vital in combating the human infertility, but regrettably, the toxicity of cryoprotectants and the occurrence of intracellular icing, osmotic shocks or shrinkage of the cells below a given threshold volume greatly affects the success rate of this technique. Using the virtue of nanotechnologies and depositing water-repellent soot nanoparticles on the inner walls of cryovials may outline new directions in the development of cryobiology, but doubts related to the soot's venomosity question its practical implementability. The scientific content of this article eliminates the existing apprehensions by analyzing the cytotoxicity of three types of rapeseed oil soot, differing in morphology, surface chemistry and zeta potential, towards human spermatozoa. Upon intermittent evaluations of the sperm motility within 270 min of incubation in vials comprising carbon nanoparticles, we reveal that this soot category is non-cytotoxic or at worst, faintly toxic to the gametes provided by twenty individuals. Enhanced progressive sperm motility is observed at ∼50-60% of patients following the soot treatments, which is attributed to electrostatic repulsions and biochemical alterations in the seminal plasma. These fascinating results open new horizons for incorporation of the rapeseed oil soot as a tool for functional preparation and activation of human spermatozoa preceding in vitro fertilization.

Modular and Integrated Systems for Nanoparticle and Microparticle Synthesis-A Review

Nanoparticles (NPs) and microparticles (MPs) have been widely used in different areas of research such as materials science, energy, and biotechnology. On-demand synthesis of NPs and MPs with desired chemical and physical properties is essential for different applications. However, most of the conventional methods for producing NPs/MPs require bulky and expensive equipment, which occupies large space and generally need complex operation with dedicated expertise and labour. These limitations hinder inexperienced researchers to harness the advantages of NPs and MPs in their fields of research. When problems individual researchers accumulate, the overall interdisciplinary innovations for unleashing a wider range of directions are undermined. In recent years, modular and integrated systems are developed for resolving the ongoing dilemma. In this review, we focus on the development of modular and integrated systems that assist the production of NPs and MPs. We categorise these systems into two major groups: systems for the synthesis of (1) NPs and (2) MPs; systems for producing NPs are further divided into two sections based on top-down and bottom-up approaches. The mechanisms of each synthesis method are explained, and the properties of produced NPs/MPs are compared. Finally, we discuss existing challenges and outline the potentials for the development of modular and integrated systems.

A facile, fast, and low-cost method for fabrication of micro/nano-textured superhydrophobic surfaces

HYPOTHESIS

Alkyl ketene dimer (AKD) is frequently used in paper industry as an inexpensive sizing agent. The formation of a porous structure after curing the solidified AKD for an extra-long time (4-6 days) results in superhydrophobicity. In this study, a facile and low-cost method was utilized to turn the surface of AKD superhydrophobic in a very short period of time.

EXPERIMENTS

We fabricated superhydrophobic coatings by dipping glass and paper substrates in molten AKD and then treating them with ethanol after solidification. The samples were characterized by X-ray diffraction, Scanning electron microscopy, Fourier transform-infrared spectroscopy, X-ray photoelectron spectroscopy, Confocal laser scanning microscopy, and dynamic contact angle goniometry.

FINDINGS

The results show that briefly treating the coatings, obtained from isothermally heated AKD melt at 40 °C for 3 min, with ethanol leads to superhydrophobicity with advancing and receding contact angles of 158.7 ± 1.4° and 156.8 ± 0.9°, respectively. By increasing the melt temperature to 70 °C and its heating time to 6 h followed by ethanol treatment, the advancing and receding contact angles increased to 163.7 ± 1.3° and 162.6 ± 1.2°, respectively. This enhancement in superhydrophobicity is due to the formation of porous, entangled irregular micro/nano textures that create air cushions on the surface resulting in droplet state transition from Wenzel to Cassie.

Natural rubber as a renewable carbon source for mesoporous carbon/silica nanocomposites

This study is the first report on the preparation of mesoporous carbon/silica (MCS) nanocomposites with tunable mesoporosity and hydrophobicity using natural rubber (NR) as a renewable and cheap carbon source. A series of mesoporous nanocomposites based on NR and hexagonal mesoporous silica (HMS) were prepared via an in situ sol–gel process and used as precursors; then, they were converted into MCS materials by controlled carbonization. The NR/HMS precursors exhibited a high dispersion of rubber phase incorporated into the mesostructured silica framework as confirmed by small-angle X-ray scattering and high-resolution transmission electron microscopy. An increase in the carbonization temperature up to 700 °C resulted in MCS nanocomposites with a well-ordered mesostructure and uniform framework-confined wormhole-like channels. The NR/HMS nanocomposites possessed high specific surface area (500–675 m² g⁻¹) and large pore volume (1.14–1.44 cm³ g⁻¹). The carbon content of MCS (3.0–16.1 wt%) was increased with an increase in the H₂SO₄ concentration. Raman spectroscopy and X-ray photoelectron spectroscopy revealed the high dispersion of graphene oxide-like carbonaceous moieties in MCS materials; the type and amount of oxygen-containing groups in obtained MCS materials were determined by H₂SO₄ concentration. The enhanced hydrophobicity of MCS nanocomposites was related to the carbon content and the depletion of surface silanol groups, as confirmed by the water sorption measurement. The study on the controlled release of diclofenac in simulated gastrointestinal environment suggests a potential application of MCS materials as drug carriers.

Superhydrophobic Civil Engineering Materials: A Review from Recent Developments

Superhydrophobic surfaces have drawn attention from scientists and engineers because of their extreme water repellency. More interestingly, these surfaces have also demonstrated an infinite influence on civil engineering materials. In this feature article, the history of wettability theory is described firstly. The approaches to construct hierarchical micro/nanostructures such as chemical vapor deposition (CVD), electrochemical, etching, and flame synthesis methods are introduced. Then, the advantages and limitations of each method are discussed. Furthermore, the recent progress of superhydrophobicity applied on civil engineering materials and its applications are summarized. Finally, the obstacles and prospects of superhydrophobic civil engineering materials are stated and expected. This review should be of interest to scientists and civil engineers who are interested in superhydrophobic surfaces and novel civil engineering materials.

Superhydrophobic Soot Coated Quartz Crystal Microbalances: A Novel Platform for Human Spermatozoa Quality Assessment

The functionality of human spermatozoa is a key factor for the success rate of natural human reproduction, but unfortunately the infertility progressively increases due to multifarious environmental factors. Such disquieting statistics requires the employment of sophisticated computer-assisted methods for semen quality analysis, whose precision, however, is unreliable in cases of patients with low sperm concentrations. In this study, we report a novel quartz crystal microbalance (QCM) based biosensor for in-situ quality assessment of male gametes, comprising a superhydrophobic soot coating as an interface sensing material. The soot deposition on the surface of a 5 MHz QCM eliminates the noise that normally arises upon immersion of the uncoated sensor in the test liquid environment, allowing the detection of human spermatozoa down to 1000–100,000 units/mL (1–100 ppb). Furthermore, the soot coated QCM delimitates in a highly repeatable way the immotile and motile sperm cells by inducing fundamentally distinct responses in respect to sensor sensitivity and signal trends. The obtained results reveal the strong potential of the superhydrophobic QCM for future inclusion in diverse laboratory analyses closely related to the in vitro fertilization procedures, with a final aim of gaining practical approaches for diagnoses and selection of male gametes.