MnCo2O4 Spinel Nanorods for Highly Sensitive Electrochemical Detection of Nitrite

The rational design of nitrite sensors has attracted significant research interest due to their widespread use and the associated risks of methemoglobinemia and carcinogenicity. The undisclosed nitrite-sensing performance of the spinel cobaltite MnCo2O4 (MCO) prepared by an oxalate-assisted coprecipitation method is reported in this study. Spectroscopy and microscopy investigations revealed the formation of uniform MCO nanorods with a high aspect ratio. The electrocatalytic nitrite oxidation at the MCO-coated glassy carbon electrode (MCO/GCE) indicated the promising performance of the synthesized material for nitrite sensing. MCO/GCE detects nitrite in a concentration range of 5 μM to 3 mM and has a limit of detection of 0.95 μM with a higher sensitivity of 857 μA mM-1 cm-2 in a response time of 4 s. In MCO, the mixed-valence states of Co2+/Co3+ confer a high electrical conductivity, and higher valent redox couples of Mn and Co impart remarkable electrocatalytic activity toward nitrite oxidation. MCO spinel undergoes facile and ultrafast faradaic reactions to mediate nitrite oxidation. Additionally, the mesopores of MCO nanorods facilitate the rapid diffusion of electrolyte and nitrite ions. Employing the electrode in sensing nitrite in milk, lake, and tap water samples further validates its potential application in real-life testing. MCO spinel nanorods showcase promising scope for utilization in the electrochemical sensing of nitrite and inspire further exploration of transition-metal oxide-based mixed-spinel materials.

Enhancing electrochemical nitrite sensing with a novel nanocomposite of activated carbon/carbon cloth derived from microbial biofilm

A novel approach was employed to fabricate a biofilm-derived activated carbon (BioAc) electrode on a carbon cloth (Cc) substrate for electrochemical nitrite sensing in water samples. The biofilm/Cc electrode was developed using a bioelectrochemical reactor, featuring a three-electrode system with nutrient media and microbial sources. The resultant biofilm electrode was activated at 450 °C for 2 h to eliminate impurities and enhance porosity. Morphological analysis of the BioAc/Cc electrode revealed a surface characterized by a compact film composed of numerous carbon nanoparticles. X-ray diffraction (XRD) analysis exhibited broad, highly crystalline peaks, enhancing both the electrode surface area and conductivity. Amperometry tests on the modified BioAc/Cc electrodes demonstrated a detection limit of 0.015 μM, a sensitivity of 1946.54 μA mM-1 cm-2, and a linear range spanning 0.35-478.21 μM at neutral pH conditions. Moreover, the electrodes demonstrated good stability with a RSD of 2.25% after 60 days and high reproducibility with an RSD of 1.64%. Real-time results showed 99.2 and 100.1% recovery for tap water and drinking water, respectively, highlighting the potential for commercialization in the future. These findings suggest that the BioAc/Cc electrode holds substantial potential for precise nitrite detection in environmental and wastewater applications.

Electrochemical Diagnosis of Urinary Tract Infection Using Boron-Doped Diamond Electrodes

Efficient detection of sodium nitrite in human urine could be used to diagnose urinary tract infections rapidly. Here, we demonstrate a fast and novel method for the selective detection of sodium nitrite in different human urine samples using electrolysis with a bare boron-doped diamond electrode. The measurement is performed without adding any other species, such as enzymes, and uses a simple electrochemical approach with an oxidation step followed by reduction. In the present study, we pay attention to the reduction potential range for the measurement, which is substantially different from many previous literature reports that focus on the oxidation reaction. The determination of added sodium nitrite based on cyclic voltammetry or differential pulse voltammetry is employed for two pooled urine samples and three individual urine matrices. From this, the linear response ranges for sodium nitrite detection are 0.5-10 mg/L (7.2-140 μmol/L) and 10-400 mg/L (140-5800 μmol/L). The results from these urine samples convert well to the calibration curve, with a limit of detection established as 0.82 mg/L (R2 = 0.9914), which is clinically relevant.

Electrochemical, Ultrasensitive, and Selective Detection of Nitrite and H2O2: Novel Macrostructured Phthalocyanine with Composite MWCNTs on a Modified GCE

In the current study, the synthesis of tetra-4-(2-methoxyphenoxy) carboxamide cobalt(II) amide-bridged phthalocyanine (CoTMePhCAPc) is described, as well as its characterization by Fourier transform infrared (FT-IR), UV-visible, and mass spectroscopy; powder X-ray diffraction (PXRD); thermogravimetric analysis (TGA); scanning electron microscopy (SEM); and electrochemistry. Sensing of nitrite (NO₂^-) and hydrogen peroxide (H₂O₂) simultaneously was done on CoTMePhCAPc with the composite multiwalled carbon nanotube (MWCNT)-modified glassy carbon electrode (CoTMePhCAPc/MWCNT/GCE) in the range of linear absorption (NO₂^- and H₂O₂: CV 50-750, differential pulse voltammetry (DPV) 50-750, CA 50-500 nmol L^-1), lower detection limit (NO₂^- and H₂O₂: CV 10.5 and 12.5, DPV 10.5 and 11.2, CA 6.0 and 5.5 nmol L^-1), and sensitivity (NO₂^- and H₂O₂: CV 0.379 and 0.529, DPV 0.043 and 0.049, CA 0.033 and 0.040 μA nM^-1 cm^-2). The composite electrode exhibits improved electrocatalytic behavior compared to modified electrodes for nitrite and H₂O₂. The CoTMePhCAPc/MWCNT/GCE sensor displays good selectivity even in the presence of an excess of interfering metal ions and biomolecules at the applied potentials of +400 mV (nitrite) and -400 mV (H₂O₂). Moreover, the fabricated sensor was studied with various phosphate-buffered saline (PBS) (pH 5-9) electrolyte solutions. The unknown H₂O₂ concentration in blood samples and apple juice and nitrite concentration in drinking water and butter leaf lettuce were all measured using the usual addition method. Docking analysis clearly indicates that the ligand shows excellent inhibition activity toward the three subjected protein molecules.

A disposable modified screen-printed electrode using egg white/ZnO rice structured composite as practical tool electrochemical sensor for formaldehyde detection and its comparative electrochemical study with Chitosan/ZnO nanocomposite

In this study, Chitosan/ZnO nanocomposite (Ch/ZnO) and egg white/ZnO rice structured composite was synthesized by simple wet chemical technique and characterised by various techniques. A comparative electrochemical analysis were carried out and determined that egg white/ZnO rice structured composite modified screen printed electrode (SPCE) showed good electrochemical behaviour. The electrochemical activity of egg white/ZnO rice structured composite SPCE was investigated for the oxidation-reduction of formaldehyde in alkaline media using cyclic voltammetry (CV).Their unique electrocatalytic activity for the formaldehyde found to exhibit 254 mV cathodic current response towards low negative potentials. Based on these results, a novel screen printed sensor (Egg white albumin/ZnO rice structured composite) for the determination of formaldehyde was analysed using differential pulse voltammetry (DPV). The sensor response was linear from 0.001 mM to 0.005 mM with limit of detection (LOD) 6.2 nM and their sensitivity was found to be 770.68 mM/μA. The developed electrochemical formaldehyde sensor was successfully applied as working electrode in cyclic voltammetric determination of formaldehyde in urine samples. The sensor is selective, inexpensive, stable over several days and disposable as well as simple to manufacture and operate. The system described here can be easily be adapted to other substrates and used as practical tool for formaldehyde analysis.

Ultrasonic Assisted Synthesis of Size-Controlled Cu-Metal-Organic Framework Decorated Graphene Oxide Composite: Sustainable Electrocatalyst for the Trace-Level Determination of Nitrite in Environmental Water Samples

Excess levels of nitrite ion in drinking water interact with amine functionalized compounds to form carcinogenic nitrosamines, which cause stomach cancer. Thus, it is indispensable to develop a simple protocol to detect nitrite. In this paper, a Cu-metal-organic framework (Cu-MOF) with graphene oxide (GO) composite was synthesized by ultrasonication followed by solvothermal method and then fabricated on a glassy carbon (GC) electrode for the sensitive and selective determination of nitrite contamination. The SEM image of the synthesized Cu-MOF showed colloidosome-like structure with an average size of 8 μm. Interestingly, the Cu-MOF-GO composite synthesized by ultrasonic irradiation followed by solvothermal process produce controlled size of 3 μm colloidosome-like structure. This was attributed to the formation of an exfoliated sheet-like structure of GO by ultrasonication in addition to the obvious influence of GO providing the oxygen functional groups as a nucleation node for size-controlled growth. On the other hand, the composite prepared without ultrasonication exhibited 6.6 μm size agglomerated colloidosome-like structures, indicating the crucial role of ultrasonication for the formation of size-controlled composites. XPS results confirmed the presence of Cu(II) in the as-synthesized Cu-MOF-GO based on the binding energies at 935.5 eV for Cu 2p_3/2 and 955.4 eV for Cu 2p_1/2. The electrochemical impedance studies in [Fe(CN)₆]^3-/4- redox couple at the composite fabricated electrode exhibited more facile electron transfer than that with Cu-MOF and GO modified electrodes, which helped to utilize Cu-MOF-GO for trace level determination of nitrite in environmental effluent samples. The Cu-MOF-GO fabricated electrode offered a superior sensitive platform for nitrite determination than the Cu-MOF and GO modified electrodes demonstrating oxidation at less positive potential with enhanced oxidation current. The present sensor detects nitrite in the concentration range of 1 × 10^-8 to 1 × 10^-4 M with the lowest limit of detection (LOD) of 1.47 nM (S/N = 3). Finally, the present Cu-MOF-GO electrode was successfully exploited for nitrite ion determination in lake and dye contaminated water samples.

Application of Graphene-Based Materials for Detection of Nitrate and Nitrite in Water-A Review

Nitrite and nitrate are widely found in various water environments but the potential toxicity of nitrite and nitrate poses a great threat to human health. Recently, many methods have been developed to detect nitrate and nitrite in water. One of them is to use graphene-based materials. Graphene is a two-dimensional carbon nano-material with sp² hybrid orbital, which has a large surface area and excellent conductivity and electron transfer ability. It is widely used for modifying electrodes for electrochemical sensors. Graphene based electrochemical sensors have the advantages of being low cost, effective and efficient for nitrite and nitrate detection. This paper reviews the application of graphene-based nanomaterials for electrochemical detection of nitrate and nitrite in water. The properties and advantages of the electrodes were modified by graphene, graphene oxide and reduced graphene oxide nanocomposite in the development of nitrite sensors are discussed in detail. Based on the review, the paper summarizes the working conditions and performance of different sensors, including working potential, pH, detection range, detection limit, sensitivity, reproducibility, repeatability and long-term stability. Furthermore, the challenges and suggestions for future research on the application of graphene-based nanocomposite electrochemical sensors for nitrite detection are also highlighted.

Heterostructural CuO-ZnO Nanocomposites: A Highly Selective Chemical and Electrochemical NO2 Sensor

A simple one-step chemical method is employed for the successful synthesis of CuO(50%)-ZnO(50%) nanocomposites (NCs) and investigation of their gas sensing properties. The X-ray diffraction studies revealed that these CuO-ZnO NCs display a hexagonal wurtzite-type crystal structure. The average width of 50-100 nm and length of 200-600 nm of the NCs were confirmed by transmission electron microscopic images, and the 1:1 proportion of Cu and Zn composition was confirmed by energy-dispersive spectra, i.e., CuO(50%)-ZnO(50%) NC studies. The CuO(50%)-ZnO(50%) NCs exhibit superior gas sensing performance with outstanding selectivity toward NO2 gas at a working temperature of 200 °C. Moreover, these NCs were used for the indirect evaluation of NO2 via electrochemical detection of NO2 - (as NO2 converts into NO2 - once it reacts with moisture, resulting into acid rain, i.e., indirect evaluation of NO2). As compared with other known modified electrodes, CuO(50%)-ZnO(50%) NCs show an apparent oxidation of NO2 - with a larger peak current for a wider linear range of nitrite concentration from 20 to 100 mM. We thus demonstrate that the as-synthesized CuO(50%)-ZnO(50%) NCs act as a promising low-cost NO2 sensor and further confirm their potential toward tunable gas sensors (electrochemical and solid state) (Scheme 1).

Ultrasensitive and bifunctional ZnO nanoplates for an oxidative electrochemical and chemical sensor of NO2: implications towards environmental monitoring of the nitrite reaction

Herein, we focused on the one pot synthesis of ZnO nanoplates (NP edge thickness of ∼100 nm) using a chemical emulsion approach for chemical (direct) and electrochemical (indirect) determination of NO₂.

A rapid and sensitive electrochemiluminescent sensor for nitrites based on C3N4 quantum dots on C3N4 nanosheets

Nitrite, an inorganic anion, is widely applied in various fields.