Smart bio-nano interface derived from zein protein as receptors for biotinyl moiety

Proteinaceous, tunable nanostructures of zein (prolamine of corn) were developed as biotinyl-specific receptors using a molecular imprinting technique. Sacrificial templates, such as latex beads (LB3) and anodized alumina membrane (AAM), have been used to control nanostructural patterns in biotin-imprinted zein (BMZ). Briefly, a methanolic solution of the zein-biotin complex was drop cast upon a self-organized LB3 and AAM templates on Au/quartz surfaces. Subsequent dissolution of these sacrificial templates affords highly oriented, predetermined, and uniformly grown hyperporous (300 nm) and nanowires (150 nm) motifs of zein (BMZ-LB3 and BMZ-AAM), as shown by scanning electron microscopy (SEM). Selective extraction of biotin molecular template cast-off site-selective biotin imprints within these zein nanostructures complementary to biotinyl moieties. Alternatively, biotin-imprinted zein nanoparticles (BMZ-Np) and thin film (BMZ-MeOH) were prepared by coacervation and drop casting methods, respectively. Density functional theoretical (DFT) studies reveal strong hydrogen-bonded interaction of biotin with serine and glutamine residues of zein. Quartz crystal microbalance (QCM) studies show remarkable sensitivity of the hyperporous-BMZ-LB3 and nanowires of BMZ-AAM towards biotin derivative (biotin methyl ester) by five (24.75 ± 1.34 Hz/mM) and four (18.19 ± 0.75 Hz/mM) times, respectively, higher than the BMZ-MeOH. Enhanced permeability features of the zein nanostructures, when templated with LB3, enable the QCM detection of biotin- or its derivatives down to 12.9 ng mL^-1 from dairy products (Kefir). The outcome of this study shall be a key aspect in interfacing biological materials with micro-/nano-sensors and electronic devices for detecting pertinent analytes using sustainably developed biopolymer-based nanostructures.

Preparation of hemoglobin (Hb)-imprinted poly(ionic liquid)s via Hb-catalyzed eATRP on gold nanodendrites

Hemoglobin (Hb)-imprinted poly(ionic liquid)s (HIPILs) were prepared on the surface of Au electrode modified with gold nanodendrites (Au/ND/HIPILs). HIPILs were synthesized with 1-vinyl-3-propyl imidazole sulfonate ionic liquids as functional monomers via electrochemically mediated atom transfer radical polymerization (eATRP) catalyzed by Hb. The Au/ND/HIPILs electrode was examined by cyclic voltammetry (CV), scanning electron microscope (SEM), and X-ray photoelectron spectroscopy (XPS). The Au/ND/HIPILs electrode was also used as an electrochemical sensor to determine Hb by differential pulse voltammetry (DPV). Under the optimal conditions, the detection range of Hb was from 1.0 × 10^-14 to 1.0 × 10^-4 mg/mL with a limit of detection of 5.22 × 10^-15 mg/mL (S/N = 3). Compared with other methods, the sensor based on poly(ionic liquid)s had the broader linear range and lower detection limit. Graphical Abstract.

Integrating ionic liquids with molecular imprinting technology for biorecognition and biosensing: A review

As promising alternatives to natural receptors, artificial molecularly imprinted polymers (MIPs) have received great attention in biotechnology. Nevertheless, some bottlenecks limit their further development, including low adsorption capacity, poor recognition efficiency, slow response, and insipid aqueous compatibility. Ionic liquids (ILs) show the features of tailored structures and properties, high conductivity, good solubility, and excellent stability. Because of these advantages, they have found intensive use in MIPs by remedying the latter's shortcomings. In this review, we summarize the integration of ILs and MIPs for biorecognition and biosensing. The versatile roles of ILs in improving the performance of MIPs are firstly summarized, including serving as solvents, porogens, functional monomers, organic surface modifiers, dummy templates, and cross-linkers. Then, specific applications of IL-based MIPs in peptide recognition, protein sensing, and food safety analysis are discussed. Finally, future trends and challenges for the design and development of IL-based MIPs and their applications in the biorecognition and biosensing are proposed.

Creating magnetic ionic liquid-molecularly imprinted polymers for selective extraction of lysozyme

A novel magnetic (Fe3O4) surface molecularly imprinted polymer (MIP) based on ionic liquid (IL) (Fe3O4@VTEO@IL-MIPs) was prepared for the selective extraction of lysozyme (Lys). As the functional monomer of the MIPs, an imidazolium-based IL with vinyl groups was prepared. It can provide multiple interactions with template molecules. The amount of IL was optimized (200 mg). Fourier transform infrared spectrometry (FT-IR), transmission electron microscopy (TEM), dynamic light scattering (DLS), thermogravimetric analysis (TGA) and a vibrating sample magnetometer (VSM) were used to characterize the MIP. The results indicate the successful formation of an imprinting polymer layer. The concentration of Lys in the supernatant was determined by UV-vis spectrophotometry at a wavelength of 280 nm. The maximum adsorption capability of the MIP is 213.7 mg g-1 and the imprinting factor (IF) is 2.02. It took 2.5 h for the MIP to attain adsorption equilibrium. The structure of the protein was evaluated using circular dichroism (CD) spectra and UV-visible spectra. The adsorption performance was further investigated in detail by selective adsorption experiments, competitive rebinding tests, and reusability and stability experiments. Furthermore, it was utilized to separate the template protein from a mixture of proteins and real samples successfully because of the high adsorption capacity for Lys.

Green Strategies for Molecularly Imprinted Polymer Development

Molecular imprinting is a powerful technology to create artificial receptors within polymeric matrices. Although it was reported for the first time by Polyakov, eighty-four years ago, it remains, nowadays, a very challenging research area. Molecularly imprinted polymers (MIPs) have been successfully used in several applications where selective binding is a requirement, such as immunoassays, affinity separation, sensors, and catalysis. Conventional methods used on MIP production still use large amounts of organic solvents which, allied with stricter legislation on the use and release of chemicals to the environment and the presence of impurities on final materials, will boost, in our opinion, the use of new cleaner synthetic strategies, in particular, with the application of the principles of green chemistry and engineering. Supercritical carbon dioxide, microwave, ionic liquids, and ultrasound technology are some of the green strategies which have already been applied in MIP production. These strategies can improve MIP properties, such as controlled morphology, homogeneity of the binding sites, and the absence of organic solvents. This review intends to give examples reported in literature on green approaches to MIP development, from nano- to micron-scale applications.

A new composite of graphene and molecularly imprinted polymer based on ionic liquids as functional monomer and cross-linker for electrochemical sensing 6-benzylaminopurine

Molecularly imprinted polymers prepared using traditional functional monomers and cross-linkers exhibit slow binding kinetics, low electrocatalytic activity and adsorption capacity. Herein, we report a new composite of ionic liquid-based graphene and molecularly imprinted polymer (IL-GR-MIP) with high electrocatalytic activity and adsorption capacity to construct an effective electrochemical sensor for 6-benzylaminopurine (6-BAP). Our objective was to enhance the efficiency of the sensor by incorporating more IL in the MIP framework. We synthesized IL-GR-MIP using ionic liquid 1-vinyl-3-butylimidazolium tetrafluoroborate (IL₁) as functional monomer, ionic liquid 1,4-butanediyl-3,3'-bis-l-vinylimidazolium dibromide (IL₂) as cross-linker, 6-BAP as template, and GR as supporter. IL-GR-MIP was characterized by Fourier transform infrared spectroscopy, thermal gravimetric analysis, Raman spectroscopy, X-ray photoelectron spectroscopy, and scanning electron microscope. Compared with GR-MIP composites based on methacrylic acid or IL₁ as functional monomer, N, N'-methylenebisacrylamide and ethylene glycol dimethacrylate as cross-linker, the IL-GR-MIP (prepared with ionic liquids as functional monomer and cross-linker) sensor exhibited highest peak current for 6-BAP. The results indicate the ability of IL₂ as cross-linker to enhance electrocatalytic activity and adsorption capacity for 6-BAP of IL-GR-MIP. Under the optimized conditions, the peak current of IL-GR-MIP sensor was linear to 6-BAP concentration in the range of 0.5-50 μM with a detection limit of 0.2 μM (S/N = 3). The IL-GR-MIP sensor exhibited good selectivity with the anti-interference ability of 1000-fold ascorbic acid in 6-BAP determination. Furthermore, we demonstrated practical applicability of IL-GR-MIP sensor in detecting 6-BAP in real samples with satisfactory results.

Recent advances in green reagents for molecularly imprinted polymers

Molecularly imprinted polymers (MIPs) are tailor-made materials with special binding sites.

Ultrasensitive, highly selective, and real-time detection of protein using functionalized CNTs as MIP platform for FOSPR-based biosensor

A facile approach is presented for the detection of bovine serum albumin (BSA), based on fiber optic surface plasmon resonance (FOSPR) combined with molecular imprinting (MI). The probe is fabricated by exploiting the plasmonic property of silver thin film and vinyl-functionalised carbon nanotube-based MIP platform. BSA template molecules are imprinted on the MIP layer coated over multi-walled carbon nanotubes to ensure high specificity of the probe in the interfering environments. In addition, FOSPR endorses the sensor capability of real-time and remote sensing along with very high sensitivity due to the use of nanostructured MI platform. The response of the probe is considered in terms of the absorbance spectrum recorded for various concentrations of BSA. The sensor shows a wide dynamic range of 0-350 ng l^-1 with a considerably linear response up to 100 ng l^-1 in the peak absorbance wavelength with BSA concentration. A highest sensitivity of 0.862 nm per ng l^-1 is achieved for the lowest concentration of BSA and it decreases with the increase in BSA concentration. The performance of the present sensor is compared with those reported in the literature in terms of the limit of detection. It is found that the probe possesses a lowest LOD of 0.386 ng l^-1 in addition to other advantages such as real-time online monitoring, high sensitivity, high specificity, and remote sensing.

Molecularly Imprinted Membranes: Past, Present, and Future

More than 80 years ago, artificial materials with molecular recognition sites emerged. The application of molecular imprinting to membrane separation has been studied since 1962. Especially after 1990, such research has been intensively conducted by membranologists and molecular imprinters to understand the advantages of each technique with the aim of constructing an ideal membrane, which is still an active area of research. The present review aims to be a substantial, comprehensive, authoritative, critical, and general-interest review, placed at the cross section of two broad, interconnected, practical, and extremely dynamic fields, namely, the fields of membrane separation and molecularly imprinted polymers. This review describes the recent discoveries that appeared after repeated and fertile collisions between these two fields in the past three years, to which are added the worthy acknowledgments of pioneering discoveries and a look into the future of molecularly imprinted membranes. The review begins with a general introduction in membrane separation, followed by a short theoretical section regarding the basic principles of mass transport through a membrane. Following these general aspects on membrane separation, two principles of obtaining polymeric materials with molecular recognition properties are reviewed, namely, molecular imprinting and alternative molecular imprinting, followed the methods of obtaining and practical applications for the particular case of molecularly imprinted membranes. The review continues with insights into molecularly imprinted nanofiber membranes as a promising, highly optimized type of membrane that could provide a relatively high throughput without a simultaneous unwanted reduction in permselectivity. Finally, potential applications of molecularly imprinted membranes in a variety of fields are highlighted, and a look into the future of membrane separations is offered.