Modulation of implants PEEK to composite resin shear bond strength and surface roughness on pre-treatment with contemporary air abrasion techniques vs photodynamic therapy vs conventional diamond grit bur

AIM

The chief aim of the study was to determine/equate the surface roughness (SRa) and shear bond strength (BS) of pretreated PEEK discs with contemporary air abrasion techniques, photodynamic (PD) therapy by curcumin photosensitizer (PS) and conventional diamond grit straight fissure bur adhered to the composite resin discs.

MATERIAL AND METHOD

Two hundred discs of PEEK were prepared of 6 mm × 2 mm × 10 mm dimension. The discs were randomly divided into five groups (n = 40) for treatment, Group I: treatment with deionized distilled water (control group); Group II: PD therapy using curcumin PS; Group III: discs treated and abraded with air-borne particles (ABP) silica (30 μm particle size) modified alumina (Al); Group IV: ABP of alumina (110 μm particle size); and Group V: The PEEK were finished with 600-μm grit size straight diamond cutting bur installed in high speed hand-piece. The surface profilometer was used to evaluate the values of surface roughness (SRa) of pretreated PEEK discs. The discs were luted and bonded to discs of composite resin. The bonded PEEK samples were placed in Universal testing machine to evaluate shear BS. The type of BS failure for PEEK discs pre-treated with five regimes respectively was evaluated under stereo-microscope. The data was statistically analyzed using one-way ANOVA and the comparisons between mean values of shear BS were evaluated by Tukey's test (ρ≤0.05).

RESULTS

The PEEK samples pre-treated with diamond cutting straight fissure burs displayed statistically significant highest value of SRa values (3.258± 0.785 µm). Similarly, the shear BS was observed to be higher for the PEEK discs pre-treated with straight fissure bur (22.37±0.78 MPa). A comparable difference but not statistically significant difference was observed between PEEK discs pre-treated by curcumin PS and ABP-silica modified alumina (ρ ≥ 0.05).

CONCLUSION

PEEK discs pre-treated with diamond grit straight fissure bur displayed highest values of SRa and shear BS. It was trailed by ABP-Al pre-treated discs; whereas the SRa and shear BS values for the discs pre-treated with ABP-silica modified Al and curcumin PS did not show competitive difference.

On the photobehaviour of curcumin in biocompatible hosts: The role of H-abstraction in the photodegradation and photosensitization

Curcumin (CUR) is a naturally occurring pigment extensively studied due to its therapeutic activity and delivered by suitable nanocarriers to overcome poor solubility in aqueous media. The significant absorption of CUR in the visible blue region has prompted its use as a potential phototherapeutic agent in treating infectious and cancer diseases, although the mechanism underlying the phototoxic effects is still not fully understood. This contribution investigates the photobehaviour of CUR within polymeric micelles, microemulsions, and zein nanoparticles, chosen as biocompatible nanocarriers, and human serum albumin as a representative biomolecule. Spectroscopic studies indicate that in all host systems, the enolic tautomeric form of CUR is converted in a significant amount of the diketo form because of the perturbation of the intramolecular hydrogen bond. This leads to intermolecular H-abstraction from the host components by the lowest excited triplet state of CUR with the formation of the corresponding ketyl radical, detected by nanosecond laser flash photolysis. This radical is oxidized by molecular oxygen, likely generating peroxyl and hydroperoxyl radical species, unless in Zein, reasonably due to the poor availability of oxygen in the closely packed structure of this nanocarrier. In contrast, no detectable formation of singlet oxygen was revealed in all the systems. Overall these results highlight the key role of the H-abstraction process over singlet oxygen sensitization as a primary photochemical pathway strictly dictated by the specific features of the microenvironment, providing new insights into the photoreactivity of CUR in biocompatible hosts that can also be useful for a better understanding of its phototoxicity mechanism.

Magnetic-Responsive Photosensitizer Nanoplatform for Optimized Inactivation of Dental Caries-Related Biofilms: Technology Development and Proof of Principle

Conventional antibiotic therapies for biofilm-trigged oral diseases are becoming less efficient due to the emergence of antibiotic-resistant bacterial strains. Antimicrobial photodynamic therapy (aPDT) is hampered by restricted access to bacterial communities embedded within the dense extracellular matrix of mature biofilms. Herein, a versatile photosensitizer nanoplatform (named MagTBO) was designed to overcome this obstacle by integrating toluidine-blue ortho (TBO) photosensitizer and superparamagnetic iron oxide nanoparticles (SPIONs) via a microemulsion method. In this study, we reported the preparation, characterization, and application of MagTBO for aPDT. In the presence of an external magnetic field, the MagTBO microemulsion can be driven and penetrate deep sites inside the biofilms, resulting in an improved photodynamic disinfection effect compared to using TBO alone. Besides, the obtained MagTBO microemulsions revealed excellent water solubility and stability over time, enhanced the aPDT performance against S. mutans and saliva-derived multispecies biofilms, and improved the TBO's biocompatibility. Such results demonstrate a proof-of-principle for using microemulsion as a delivery vehicle and magnetic field as a navigation approach to intensify the antibacterial action of currently available photosensitizers, leading to efficient modulation of pathogenic oral biofilms.

Enhancement of photodynamic bactericidal activity of curcumin against Pseudomonas Aeruginosa using polymyxin B

BACKGROUND

Pseudomonas aeruginosa (P. aeruginosa) is an emerging opportunistic pathogen, which can cause bacterial skin diseases such as green nail syndrome, interdigital infections and folliculitis. Curcumin-mediated antimicrobial photodynamic therapy (aPDT) has been demonstrated as a promising therapeutic option for the treatment of skin infection though its inactivation of gram-negative bacteria such as P. aeruginosa.

MATERIALS AND METHODS

In the present study, we examined the adjuvant effect of polymyxin B on the antibacterial activity of curcumin-mediated aPDT against P. aeruginosa. P. aeruginosa was treated with curcumin in the presence of 0.1-0.5 mg/L polymyxin B and irradiated by blue LED light (10 J/cm²). Bacterial cultures treated with curcumin alone served as controls. Colony forming units (CFU) were counted and the viability of P. aeruginosa was calculated after aPDT treatment. The possible underlying mechanisms for the enhanced killing effects were also explored.

RESULTS

The killing effects of curcumin-mediated aPDT against P. aeruginosa was significantly enhanced by polymyxin B (over 2-log reductions). Moreover, it was also observed that addition of polymyxin B in the curcumin-mediated aPDT led to the apparent bacterial membrane damage with increased leakage of cytoplasmic contents and extensive DNA and protein degradation.

DISCUSSION

The photodynamic action of curcumin against P. aeruginosa could be significantly enhanced by the FDA-approved drug polymyxin B. Our results highlight the potential of introducing polymyxin B to enhance the effects of aPDT treatment against gram-negative skin infections, in particular, P. aeruginosa.

Nanotechnology-based lipid systems applied to resistant bacterial control: A review of their use in the past two decades

The rate of infections caused by resistant bacteria to the antimicrobials available for human use grows exponentially every year, which generates major impacts on human health and the world economy. In the last two decades, human beings can witness the expressive increase in the Science and Technology worldwide, and areas such as Health Sciences have benefited from these advances in favor of human health, such as the advent of Pharmaceutical Nanotechnology as an important approach applied for bacterial infections treatment with resistance profile to available antibiotics. This review of the scientific literature brings the applicability of nanotechnology-based lipid systems as an innovative tool in the improvement of bacterial infections treatment. Important studies involving the use of liposomes, solid lipid nanoparticles, nanostructured lipid carriers, nanoemulsions, microemulsions and lipid nanocapsules were verified in the period from 2000 to 2020, where important scientific results were found and will serve as a basis for the use of these systems to remain in constant updating. This manuscript shows the use of these drug delivery systems as potential vehicles for antibacterial compounds, which opens a new hope in the complement of the antibacterial therapeutic arsenal. Important studies developed in the last 20 years are present in this review, and thus guarantees an update on the use of these drug delivery systems for researchers from different areas of Health Sciences.

Current Trends in Drug Delivery System of Curcumin and its Therapeutic Applications

Curcumin is a poly phenolic compound extracted from turmeric. Over the past years, it has acquired significant interest among researchers due to its numerous pharmacological activities like anti- cancer, anti-alzheimer, anti-diabetic, anti-bacterial, anti-inflammatory and so on. However, the clinical use of curcumin is still obstructed due to tremendously poor bioavailability, rapid metabolism, lower gastrointestinal absorption, and low permeability through cell that makes its pharmacology thrilling. These issues have led to enormous surge of investigation to develop curcumin nano formulations which can overcome these restrictive causes. The scientists all across the universe are working on designing several drug delivery systems viz. liposomes, micelles, magnetic nano carriers, etc. for curcumin and its composites which not only improve its physiochemical properties but also enhanced its therapeutic applications. The review aims to systematically examine the treasure of information about the medicinal use of curcumin. This article delivers a general idea of the current study piloted to overwhelm the complications with the bioavailability of curcumin which have exhibited an enhanced biological activity than curcumin. This article explains the latest and detailed study of curcumin and its conjugates, its phytochemistry and biological perspectives and also proved curcumin as an efficient drug candidate for the treatment of numerous diseases. Recent advancements and futuristic viewpoints are also deliberated, which shall help researchers and foster commercial translations of improved nanosized curcumin combination for the treatment of various diseases.

An insight into curcumin-based photosensitization as a promising and green food preservation technology

Consumer awareness on the side effects of chemical preservatives has increased the demand for natural preservation technologies. An efficient and sustainable alternative to current conventional preservation techniques should guarantee food safety and retain its quality with minimal side effects. Photosensitization, utilizing light and a natural photosensitizer, has been postulated as a viable and green alternative to the current conventional preservation techniques. The potential of curcumin as a natural photosensitizer is reviewed in this paper as a practical guide to develop a safe and effective decontamination tool for industrial use. The fundamentals of the photosensitization mechanism are discussed, with the main emphasis on the natural photosensitizer, curcumin, and its application to inactivate microorganisms as well as to enhance the shelf life of foods. Photosensitization has shown promising results in inactivating a wide spectrum of microorganisms with no reported microbial resistance due to its particular lethal mode of targeting nucleic acids. Curcumin as a natural photosensitizer has recently been investigated and demonstrated efficacy in decontamination and delaying spoilage. Moreover, studies have shown the beneficial impact of an appropriate encapsulation technique to enhance the cellular uptake of photosensitizers, and therefore, the phototoxicity. Further studies relating to improved delivery of natural photosensitizers with inherent poor solubility should be conducted. Also, detailed studies on various food products are warranted to better understand the impact of encapsulation on curcumin photophysical properties, photo-driven release mechanism, and nutritional and organoleptic properties of treated foods.

Inactivation of specific spoilage organism (Pseudomonas) of sturgeon by curcumin-mediated photodynamic inactivation

The present study aimed to measure the inactivation effect and mechanism of curcumin-mediated photodynamic inactivation (PDI) on the specific spoilage organism (Pseudomonas) of the sturgeon. The conditions of PDI used were as follows: 30 μM curcumin, 15 W LED light (470 nm) power and 90 s irradiation time. Under these conditions, the high-throughput sequencing was used to study the microbiota of sturgeon. The method of aerobic plate colony count (APC) was used to determine the viability of Pseudomonas after PDI. Sodium dodecyl sulphate polyacrylamide gel electrophoresis (SDS-PAGE), the propidium iodide (PI) single staining method, and agarose gel electrophoresis were used to study the inactivation mechanism of PDI on Pseudomonas. The results showed that Pseudomonas was the specific spoilage organism of sturgeon, and PDI significantly inhibited the growth of Pseudomonas. The in-vitro inactivation rate of Pseudomonas was 99.9% with counts decreased by 3.19 ± 0.15 log₁₀ CFU/mL. The mechanism of PDI to inactivate Pseudomonas is as follows. Firstly, the high-level structure of membrane protein was destroyed, and the cell membrane permeability was increased, which caused leakage of cellular content. Then the nucleic acid inside the cell was destroyed, which eventually caused the death of bacteria. These findings demonstrate that curcumin-mediated PDI can be utilized as an effective way to inactivate the specific spoilage organism (Pseudomonas) of the sturgeon.

Enhancing curcumin's solubility and antibiofilm activity via silica surface modification

Bacterial biofilms are microbial communities in which bacterial cells in sessile state are mechanically and chemically protected against foreign agents, thus enhancing antibiotic resistance. The delivery of active compounds to the inside of biofilms is often hindered due to the existence of the biofilm extracellular polymeric substances (EPS) and to the poor solubility of drugs and antibiotics. A possible strategy to overcome the EPS barrier is the incorporation of antimicrobial agents into a nanocarrier, able to penetrate the matrix and deliver the active substance to the cells. Here, we report the synthesis of antimicrobial curcumin-conjugated silica nanoparticles (curc-NPs) as a possibility for dealing with these issues. Curcumin is a known antimicrobial agent and to overcome its low solubility in water it was grafted onto the surface of silica nanoparticles, the latter functioning as nanocarrier for curcumin into the biofilm. Curc-NPs were able to impede the formation of model P. putida biofilms up to 50% and disrupt mature biofilms up to 54% at 2.5 mg mL^-1. Cell viability of sessile cells in both cases was also considerably affected, which is not observed for curcumin delivered as a free compound at the same concentration. Furthermore, proteomics of extracted EPS matrix of biofilms grown in the presence of free curcumin and curc-NPs revealed differences in the expression of key proteins related to cell detoxification and energy production. Therefore, curc-NPs are presented here as an alternative for curcumin delivery that can be exploited not only to other bacterial strains but also to further biological applications.

Target-oriented photofunctional nanoparticles (TOPFNs) for selective photodynamic inactivation of Methicillin-resistant Staphylococcus aureus (MRSA)

To inactivate methicillin-resistant Staphylococcus aureus (MRSA) with minimum damage to host cells and tissue, target-oriented photofunctional nanoparticles (TOPFNs) were fabricated and characterized. MRSA is a predominant infective pathogen even in hospital and non-hospital environments due to its ability to develop high levels of resistance to several classes of antibiotics through various pathways. To solve this major problem, photodynamic inactivation (PDI) method applies to treat antibiotic-resistant bacteria. PDI involves the photosensitizer (PS) and light with a specific wavelength to be able to apply for a non-invasive therapeutic procedure to treat pathogenic bacteria by inducing apoptosis or necrosis of microorganisms. However, most current PDI researches have suffered from the instability of PDI agents in the biological environment due to the lack of selectivity and low solubility of PDI agents, which leads to the low PDI efficiency. In this study, the TOPFNs were fabricated by an esterification reaction to introduce hematoporphyrin (HP) and MRSA antibody to the surface of Fe₃O₄ nanoparticles. The TOPFNs were designed as dispersible PDI agent in biological condition, which was effectively used for selectively capturing and killing of MRSA. The capture efficiency TOPFNs was compared with PFNs as a negative control. The results showed that the capture efficiency of TOPFNs and PFNs was 95.55% and 6.43% in MRSA and L-929 cell mixed condition, respectively. And TOPFNs have a selective killing ability for MRSA with minimum damage to L-929 cells. Furthermore, PDI effect of TOPFNs was evaluated on the mice in vivo condition in order to check the possibility of practical medical application.