Chlorophenols in environment: Recent updates on pretreatment and analysis methods

Chlorophenols (CPs) are widely used in industries such as petrochemicals, insecticides, pharmaceuticals, synthetic dyes and wood preservatives. However, owing to the improper discharge and disposal, they have become major contaminants that are ubiquitously distributed in water, soil, and sewage sediments, posing a significant threat to ecosystems and human health. Consequently, accurate, sensitive and effective pretreatment and analysis methods for CPs are urgently required and have been actively explored in recent years. This review encompasses the pretreatment and detection methods for CPs in environmental samples from 2010 to 2024. The pretreatment methods for CPs primarily include solid-phase extraction, liquid-liquid extraction, solid-phase microextraction, liquid-phase microextraction, and QuEChERS. These methods are evolving towards more effective and environmentally friendly technologies, such as the miniaturization and automation of equipment, the development of innovative materials (including graphene, molecularly imprinted polymers, layered double hydroxides, porous organic polymers, and porous carbon), and the use of green solvents like deep eutectic solvents. Detection methods emphasize liquid chromatography-mass spectrometry, gas chromatography-mass spectrometry, sensors, and capillary electrophoresis. Advances in chromatographic columns, novel ion sources, and high-resolution mass spectrometry have significantly improved detection performance. In addition, the pros and cons of diverse techniques, critical comments and future perspectives are elaborated.

In-tube solid-phase microextraction of polycyclic aromatic hydrocarbons from refinery water samples using UiO-66/polyacrylonitrile electrospun nanofibers followed by high-performance liquid chromatography-ultraviolet detection

A simple and quick fiber-in-tube solid-phase microextraction (FIT-SPME) was introduced for the extraction and determination of nine polycyclic aromatic hydrocarbons followed by a high-performance liquid chromatography-ultraviolet detector in refinery water samples. For this purpose, a water-resistant metal-organic framework with a high surface area called UiO-66 has been applied in the form of an electrospun coating on stainless steel wires. After that, all the fibers were packed in the lumen of a stainless-steel tube to make the extraction phase. Both one variable at a time and experimental design methods have been used to optimize effective parameters on FIT-SPME. Under optimum conditions, the method demonstrated good linearity between 0.5 and 1000.0 µg/L with a coefficient of determination greater than 0.9906. Furthermore, the limits of detection values ranged from 0.2 to 1.5 µg/L. The intra-day and inter-day relative standard deviations were < 8.4% and < 9.7%, respectively. Lastly, the proposed method was applied to extract and determine analytes in four refinery water samples as well as surface water containing high total dissolved solids, and well waters where satisfactory results have been obtained.

Photochemical reactions between superoxide ions and 2,4,6-trichlorophenol in atmospheric aqueous environments

The superoxide anion radical (O₂^•-) is an important reactive oxygen species (ROS), and participates in several chemical reactions and biological processes. In this report, O₂^•- was produced by irradiating riboflavin in an O₂-saturated solution by ultraviolet light with a maximum emission at 365 nm. And the contribution of O₂^•- to 2, 4, 6-trichlorophenol (2, 4, 6-TCP) was investigated by a combination of laser flash photolysis (LFP) and UV light steady irradiation technique. The results of steady-state experiments showed that the photochemical decomposition efficiency of 2, 4, 6-TCP decreased with the increase of the initial concentration of TCP, while the increase of pH and riboflavin concentration promoted the photochemical reaction. The second-order rate constant of the reaction of the superoxide anion radical with 2, 4, 6-TCP phenoxyl radical (TCP^•) was (9.9 ± 0.9) × 10⁹ L mol^-1 s^-1 determined by laser flash photolysis techniques. The dechlorination efficiency was 61.5% after illuminating the mixed solution with UV light for 2 h. The conversion of 2, 4, 6-trichlorophenol was accompanied by the reductive dechlorination process induced by superoxide ions. The main steady products of the photochemical reaction of 2, 4, 6-TCP with O₂^•- were 2, 6-dichlorophenol (DCP), 2, 6-dichloro-1, 4-benzoquinone (DCQ) and 2, 6-dichlorohydroquinone (DCHQ). The addition process was the preferred process in the total reaction of superoxide ions with 2, 4, 6-TCP phenoxyl radical. These results indicated that the reaction of 2, 4, 6-TCP with O₂^•- was a potential conversion pathway and contribute to atmospheric aqueous phase chemistry.

In-tube solid-phase microextraction: Current trends and future perspectives

In-tube solid-phase microextraction (IT-SPME) was developed about 24 years ago as an effective sample preparation technique using an open tubular capillary column as an extraction device. IT-SPME is useful for micro-concentration, automated sample cleanup, and rapid online analysis, and can be used to determine the analytes in complex matrices simple sample processing methods such as direct sample injection or filtration. IT-SPME is usually performed in combination with high-performance liquid chromatography using an online column switching technology, in which the entire process from sample preparation to separation to data analysis is automated using the autosampler. Furthermore, IT-SPME minimizes the use of harmful organic solvents and is simple and labor-saving, making it a sustainable and environmentally friendly green analytical technique. Various operating systems and new sorbent materials have been developed to improve its extraction efficiency by, for example, enhancing its sorption capacity and selectivity. In addition, IT-SPME methods have been widely applied in environmental analysis, food analysis and bioanalysis. This review describes the present state of IT-SPME technology and summarizes its current trends and future perspectives, including method development and strategies to improve extraction efficiency.

Monitoring of priority pollutants chlorophenols in water and milk by headspace solid-phase microextraction based on electrospun polycaprolactam nanofibers decorated with cadmium oxide-carbon nanotubes

Priority pollutants chlorophenols are broadly used chemicals that are persistent in the environment and causing serious human health hazards. The current study introduces a novel adsorbent for the extraction of chlorophenols from river water, surface water, and milk by headspace solid-phase microextraction coupled with gas chromatography. The adsorbent composite was prepared by blending polycaprolactam (nylon-6) mat and newly synthesized carbon nanotubes decorated with cadmium oxide nanoparticles followed by electrospinning technique to produce based nanofiber. The proposed nanofiber was characterized by scanning electron microscopy, Fourier transform infrared spectroscopy, and X-ray diffraction techniques. The main parameters that affect extraction efficiency, including ionic strength, extraction time, desorption time, and extraction temperature, were investigated and optimized. The linear range was 0.05-5 ng/mL; the limits of detection (signal/noise=3) were 0.02-0.04 ng/mL. The relative recoveries for real samples (river water, surface water, and milk) were in the range of 84-114%.

Using cobalt/chromium layered double hydroxide nano-sheets as a novel packed in-tube solid phase microextraction sorbent for facile extraction of acidic pesticides from water samples

Cobalt/chromium-layered double hydroxide (Co/Cr (NO₃⁻)-LDH) nano-sheets were employed as a packed in-tube solid phase microextraction sorbent for efficient extraction of acidic pesticides from water samples.