3-(Sulfamic acid)-propyltriethoxysilane on biochar nanoparticles as a practical, biocompatible, recyclable and chemoselective nanocatalyst in organic reactions

Recyclable and inexpensive catalysts, waste regeneration, use of available and safe solvents are important principles of green chemistry. Therefore, in this project, biochar nanoparticles (BNPs) were synthesized by the pyrolysis method from chicken manure. Then, 3-(sulfamic acid)-propyltriethoxysilane (SAPES) was immobilized on the surface of BNPs (SAPES@BNPs). The prepared catalyst (SAPES@BNPs) was used as a commercial, practical, biocompatible and reusable catalyst in the selective oxidation of sulfides to sulfoxides. Further, the catalytic application of SAPES@BNPs was explored in the multicomponent synthesis of tetrahydrobenzo[b]pyrans under mild and green conditions. BNPs were characterized using SEM, TGA and XRD techniques. SAPES@BNPs were characterized using SEM, FT-IR spectroscopy, WDX, EDS, TGA, and XRD techniques. Particle size distribution was obtained by histogram graph. SAPES@BNPs can be recovered and reused several times. The purity of the products was studied using NMR spectroscopy.

A novel heterogeneous biocatalyst based on graphene oxide for synthesis of pyran derivatives

Graphene oxide modified with tryptophan (GO-Trp) has been introduced as a new heterogeneous acid-base biocatalyst for synthesis of some pyran derivatives. GO was prepared according to the Hummer's method and tryptophan as a low-cost green amino acid is covalently bonded to the surface of GO without any organic or toxic reagents in a green way. The new catalyst was characterized by different spectroscopic methods such as Fourier transform infrared, X-ray diffraction (XRD), etc. …. The results of XRD patterns showed an increase in the distance between the GO plates in the presence of the modifying agent which specifies the presence of amino acid between the GO layers. XPS analysis also confirmed successful modification through the presence of C-N bonds in the structure of the catalyst. In addition, improvements in thermal stability and changes in the morphology of the samples were observed using thermogravimetric analysis and Field emission scanning electron microscopy analysis respectively. Evaluation of the catalyst performance in the synthesis of some benzo[b]pyran and pyrano[3,2-c] chromene derivatives showed presentable results. Seven benzo[b]pyran (4a-4g) and five pyrano[3,2-c] chromene (4h-4l) derivatives were synthesized. GO-Trp as a safe, natural and efficient catalyst, could be reused up to 5 runs for synthesis of pyran derivatives without any significant decrease in its potency. High purity of the products and desirable yields are other points that make the present work more attractive.

Fe3O4@nano-almondshell/Si(CH2)3/2-(1-piperazinyl)ethylamine as an effective magnetite almond shell-based nanocatalyst for the synthesis of dihydropyrano[3,2-c]chromene and tetrahydrobenzo[b]pyran derivatives

The preparation and design of nano-catalysts based on magnetic biopolymers as green and biocompatible nano-catalysts have made many advances. This paper deals with the preparation of magnetite biopolymer-based Brønsted base nano-catalyst from a nano-almond (Prunus dulcis) shell. This magnetite biopolymer-based nano-catalyst was obtained through a simple process based on the core-shelling of nano-almond shell and Fe₃O₄ NPs and then the immobilization of 3-chloropropyltrimethoxysilane as linker and 2-aminoethylpiperazine as a basic section. Structural and morphological analysis of this magnetite biopolymer-based nano-catalyst were done using Fourier transform infrared spectroscopy, field emission scanning electron microscopy, X-ray diffraction, Thermogravimetric analysis, Vibrating sample magnetization, Energy-dispersive X-ray spectroscopy, Brunauer-Emmett-Teller, and Transmission electron microscopy techniques. The performance of the synthesized Fe₃O₄@nano-almondshell/Si(CH₂)₃/2-(1-piperazinyl)ethylamine as a novel magnetite biopolymer-based nano-catalyst for the synthesis of dihydropyrano[3,2-c]chromene and tetrahydrobenzo[b]pyran was investigated and showed excellent efficiency.

Synthesis, in silico studies and antibacterial assessment of α-amino phosphonates derivatives

The widespread of multi-resistant strains due to the lack of specific treatment and the propagation of infectious diseases requires all resources to remedy this scourge. This study is therefore aimed to assess the antibacterial activity of four synthetic α-Aminophosphonate 4(a-d). Methods: Firstly, α-Aminophosphonate has been synthesized and characterized, then molecular docking of these compounds 4(a-d) into the active binding site of Escherichia coli MurB enzyme (PDB Id: 1MBT) was performed to gain a comprehensive understanding of their biological activity. These compounds have been subjected to in vitro antibacterial screening against three multi-resistant strains E. coli, S. aureus, and L. monocytogenes. These compounds showed crucial antibacterial behavior against all studied strains. Thus, their docking estimation supported the in vitro results and showed that the 4c derivative has considerable binding energy towards the active site of Escherichia coli MurB. These findings provide critical information for the exploration of α-amino phosphonates as novel antibacterial agents.

Copper(II) Anchored on Amine-Functionalized MMT: A Highly Efficient Catalytic System for the One-Pot Synthesis of Bispyrano[2,3-c]pyrazole Derivatives

In this study, preparation of pyridine-2-carboimine copper complex immobilized on amine-functionalized nanoclay montmorillonite K10 was reported. The products were characterized by Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX), and thermogravimetric analysis (TGA). The catalytic activity of this new nanocatalyst, as a natural, renewable, inexpensive, and heterogeneous catalyst, was very effective for the four-component condensation reaction of hydrazine hydrate (or phenyl hydrazine), malononitrile, β-ketoester, and terephthalaldehyde (or isophthalaldehyde) toward the synthesis of multisubstituted bispyrano[2,3-c]pyrazole derivatives. From the viewpoint of green chemistry, the advantages of this approach are accessibility, simplicity, and high yields synthesis. The catalyst was recycled and reused four times without significant loss of activity.

Preparation of GO/SiO2/PEA as a new solid base catalyst for the green synthesis of some spirooxindole derivatives

Efficient and green one pot multi component synthesis of some spirooxindole derivatives in the presence of graphene oxide functionalized with 2-(1-piperazinyl) ethylamine (GO/SiO₂/PEA) as a solid base catalyst was studied. GO/SiO₂/PEA has been obtained through a two step reaction and characterized by Fourier transform infrared spectroscopy (FTIR), field emission scanning electron microscopy (FE-SEM), energy-dispersive X-ray spectroscopy (EDX), thermo gravimetric analysis (TGA), Raman spectroscopy and X-ray diffraction (XRD). Green reaction conditions, short reaction times, reusable catalyst and a high to excellent yield of products are some of the advantageous of the presented method.

Nano-SiO2/DBN: an efficacious and reusable catalyst for one-pot synthesis of tetrahydrobenzo[b]pyran derivatives

BACKGROUND

The nano-sized particles enhance the exposed surface area of the active part of the catalyst, thereby increasing the contact between precursors and catalyst considerably. In this study, nano-SiO2/1,5-diazabicyclo[4.3.0]non-5-en was synthesized, characterized and used as a heterogeneous nanocatalyst for the synthesis of tetrahydrobenzo[b]pyran derivatives. Fourier Transform Infrared Spectroscopy, Field Emission Scanning Electron Microscopy, Brunauer-Emmett-Teller plot, Energy Dispersive X-ray Spectroscopy and Thermo Gravimetric Analysis were used to discern nano-SiO2/1,5-diazabicyclo[4.3.0]non-5-en.

RESULTS

Tetrahydrobenzo[b]pyrans were synthesized by using nano-SiO2/1,5-diazabicyclo[4.3.0]non-5-en via one-pot three-component condensation of malononitrile, aldehydes and dimedone in H2O/EtOH at 60 °C. The results indicate that tetrahydrobenzo[b]pyrans were synthesized in good to high yields and short reaction times.

CONCLUSIONS

The fundamental privileges of this method are short reaction time, plain procedure, recyclability of catalyst and high yields of products.

Ecofriendly synthesis of pyrano[2,3-d]pyrimidine derivatives and related heterocycles with anti-inflammatory activities

A versatile, efficient, clean, and facile method was used for the synthesis of pyrano[2,3-d]pyrimidine derivatives by the one-pot three-component condensation reaction of thiobarbituric acid and malononitrile with p-chlorobenzaldehyde, using Fe3 O4 or ZnO or Mn3 O4 as nanostructure catalysts. The catalyst could be easily recovered using an external magnet and reused for six cycles with almost a consistent activity. A series of polyheterocyclic compounds containing five and/or six rings fused with each other was designed. The anti-inflammatory activities for some of the newly synthesized compounds were evaluated. All the synthesized compounds were characterized on the basis of their elemental analyses and spectral data.

Greener Synthesis of Nitrogen-Containing Heterocycles in Water, PEG, and Bio-Based Solvents

The solvents used in chemistry are a fundamental element of the environmental performance of processes in corporate and academic laboratories. Their influence on costs, health safety, and nature cannot be neglected. Quantitatively, solvents are the most abundant constituents of chemical transformations; therefore, acting on solvents and replacing standard solvents with safer products can have a great ecological impact. However, not all green solvents are suitable for the wide scope of organic chemistry reactions. A second point to consider is that 50% of pharmaceutical drugs are nitrogen heterocycles compounds. It therefore appeared important to provide an overview of the more ecological methodologies for synthesizing this class of compounds. In this review, all publications since 2000 that describe green reactions leading to the formation of nitrogen heterocycles using safe solvents were considered. We chose water, PEG, and bio-based solvents for their negligible toxicity. The synthesis of five-, six-, and seven-membered aromatic nitrogen heterocycles using green reactions reported in the literature to date is described.

[DMImd-DMP]: A highly efficient and reusable catalyst for the synthesis of 4H-benzo[b]pyran derivatives

A series of substituted 4H-pyrans derivatives were synthesized by a one-pot, multi-component reaction of aromatic aldehydes, malononitrile, and pyrazolone derivatives or active methylene carbonyl compounds such as dimedone, in the presence of 1,3-dimethyl imidazolium dimethyl phosphate [DMImd-DMP] as a catalyst in aqueous ethanol. Recyclability of the catalyst, high yields, simple product isolation and high atom economy are the noteworthy aspects of this protocol.

Core–shell structured magnetic silica supported propylamine/molybdate complexes: an efficient and magnetically recoverable nanocatalyst

A novel core–shell structured magnetic silica supported propylamine/molybdate complex (Fe₃O₄@SiO₂/Pr-NMo[Mo₅O₁₈]) is prepared, characterized and applied as an effective and easily recoverable nanocatalyst in the synthesis of pyrano-pyrazole derivatives.

Synthesis of new 3H-chromeno[2,3-d]pyrimidine-4,6(5H,7H)-diones via the tandem intramolecular Pinner/Dimroth rearrangement

The reaction of 2-amino-4-aryl-7,7-dimethyl-5-oxo-5,6,7,8-tetrahydro-4H-chromene-3-carbonitriles with excess aliphatic carboxylic acids in the presence of phosphoryl chloride (POCl3) afforded new 2-alkyl-5-aryl-8,8-dimethyl-8,9-dihydro-3H-chromeno[2,3-d]pyrimidine-4,6(5H,7H)-diones in high yields. The suggested mechanism involves a tandem intramolecular Pinner/Dimroth rearrangement. The synthesized compounds were characterized by infrared (IR), proton nuclear magnetic resonance (1H NMR), carbon-13 nuclear magnetic resonance (13C NMR) and elemental analysis.