Electrochemically Induced Ru/CoOOH Synergistic Catalyst as Bifunctional Electrode Materials for Alkaline Overall Water Splitting

Efficient and affordable price bifunctional electrocatalysts based on transition metal oxides for oxygen and hydrogen evolution reactions have a balanced efficiency, but it remains a significant challenge to control their activity and durability. Herein, a trace Ru (0.74 wt.%) decorated ultrathin CoOOH nanosheets (≈4 nm) supported on the surface of nickel foam (Ru/CoOOH@NF) is rationally designed via an electrochemically induced strategy to effectively drive the electrolysis of alkaline overall water splitting. The as-synthesized Ru/CoOOH@NF electrocatalysts integrate the advantages of a large number of different HER (Ru nanoclusters) and OER (CoOOH nanosheets) active sites as well as strong in-suit structure stability, thereby exhibiting exceptional catalytic activity. In particular, the ultra-low overpotential of the HER (36 mV) and the OER (264 mV) are implemented to achieve 10 mA cm-2. Experimental and theoretical calculations also reveal that Ru/CoOOH@NF possesses high intrinsic conductivity, which facilitates electron release from H2O and H-OH bond breakage and accelerates electron/mass transfer by regulating the charge distribution. This work provides a new avenue for the rational design of low-cost and high-activity bifunctional electrocatalysts for large-scale water-splitting technology and expects to help contribute to the creation of various hybrid electrocatalysts.

Comparative study of PMS oxidation with Fenton oxidation as an advanced oxidation process for Co-EDTA decomplexation

In nuclear industry, Co-EDTA complex is generated due to the decontamination activities of nuclear power plants (NPPs). This complex is extremely refractory to the convention methods and can escalate the mobility of Co radionuclide in the environment. Due to its hazardous impact on human and environment, the effective treatments of Co-EDTA complexes are highly recommended. In this study, for the first time, we applied both hydroxyl (OH) and sulfate radical (SO₄^-) based advanced oxidation processes (AOPs) namely Fenton and peroxymonosulfate (PMS) reactions for the Co-EDTA decomplexation. Both reactions exhibited higher Co-EDTA decomplexation at pH = 3, however, the PMS based reaction was found to be superior, which showed highest decomplexation efficiency (without pH adjustment) over Fenton reaction (pH = 1-13). Moreover, PMS based system was found to be more suitable than Fenton reaction, because PMS showed best Co-EDTA decomplexation efficiency without any additional catalyst dosages at the shorter reaction time. XRD data confirmed the presence of both CoO and Co(OH)₂ in the precipitates after treatment. The electron spin resonance spectroscopy (ESR) analysis identified OH and SO₄^- in Fenton and PMS system, respectively. From this study, we believe that PMS based reaction is a superior alternative of Fenton reaction for the Co-EDTA decomplexation.

Two-Dimensional Materials and Composites as Potential Water Splitting Photocatalysts: A Review

Hydrogen production via water dissociation under exposure to sunlight has emanated as an environmentally friendly, highly productive and expedient process to overcome the energy production and consumption gap, while evading the challenges of fossil fuel depletion and ecological contamination. Various classes of materials are being explored as viable photocatalysts to achieve this purpose, among which, the two-dimensional materials have emerged as prominent candidates, having the intrinsic advantages of visible light sensitivity; structural and chemical tuneability; extensively exposed surface area; and flexibility to form composites and heterostructures. In an abridged manner, the common types of 2D photocatalysts, their position as potential contenders in photocatalytic processes, their derivatives and their modifications are described herein, as it all applies to achieving the coveted chemical and physical properties by fine-tuning the synthesis techniques, precursor ingredients and nano-structural alterations.

Ionothermal Synthesis of Metal Oxide-Based Nanocatalysts and Their Application towards the Oxidative Desulfurization of Dibenzothiophene

Herein, different types of metal-containing ionic liquid (IL) complexes and various metal oxide-based nanocatalysts have been successfully prepared (from ionic liquids) and applied for the oxidative desulfurization (ODS) of dibenzothiophene (DBT). The ILs complexes are comprised of N,N′-dialkylimidazolium salts of the type [RMIM-Cl]2[MCln], where [RMIM+] = 1 alkyl-3-methylimidazolium and M = Mn(II)/Fe(II)/Ni(II)/Co(II). These complexes were prepared using an easy synthetic route by refluxing the methanolic solutions of imidazolium chloride and metal chlorides under facile conditions. The as-prepared complexes were further used as precursors during the ionothermal and chemical synthesis of various metal oxide-based nanocatalysts. The resulting ILs salts and metal oxides NPs have been characterized by FT-IR, TGA, XRD, SEM, and TEM analysis. The results indicate that thermal and chemical treatment of ILs based precursor has produced different phases of metal oxide NPs. The calcination produced α-Fe2O3, Mn3O4, and Co3O4, NPs, whereas the chemical treatment of the ILs salts have led to the production of Fe3O4, Mn2O3, and α-Co(OH)2. All the as-prepared salts and metal oxide-based nanocatalysts were used as catalysts towards ODS of dibenzothiophene. The oxidation of dibenzothiophene was performed at atmospheric conditions using hydrogen peroxide as the oxygen donor. Among various catalysts, the thermally obtained metal oxide NPs such as α-Fe2O3, Mn3O4, and Co3O4, have demonstrated relatively superior catalytic activities compared to the other materials. For example, among these nanocatalysts, α-Fe2O3 has exhibited a maximum conversion (∼99%) of dibenzothiophene (DBT) to dibenzothiophene sulfone (DBTO2).

A cobalt hydroxide nanosheet-mediated synthesis of core-shell-type Mn0.005Co2.995O4 spinel nanocubes as efficient oxygen electrocatalysts

We developed a topotatic growth method involving an exfoliated cobalt hydroxide nanosheet, which allows water-based mild reaction conditions (90 °C) for the formation of the homogeneous cubic structure of MnxCo3-xO4 spinel oxides with Mn(ii)/Co(ii) salts. The size of the nanocubes increased as the Mn content increased, e.g., 13 nm (x = 0.0), 23 nm (x = 0.005), 50 nm (x = 0.05), and 140 nm (x = 1.0). The incorporation of Mn into Co3O4 dramatically increased the ORR performance because the catalytically active Mn cations exclusively substitute the less active Co2+ in the MnxCo3-xO4 structure. We effectively reduced the Mn content in the spinel Co3O4 structure to a value of 0.005, representing the Mn0.005Co2.995O4 spinel nanocubes that unexpectedly exhibited the best ORR activity among the samples. In addition, the XPS and ICP characterizations suggest an Mn-rich shell/Co-rich core for the MnxCo3-xO4 nanocubes.

Nanosheets of nickel, cobalt and manganese triple hydroxides/oxyhydroxides as efficient electrode materials for asymmetrical supercapacitors

An in situ method to fabricate thin nanosheets of Nickel, Cobalt and Manganese composite for charge storage applications is reported.

CoO microspheres and metallic Co evolved from hexagonal α-Co(OH)2 plates in a hydrothermal process for lithium storage and magnetic applications

CoO microspheres and metallic Co could be successfully synthesized by simply reacting cobalt acetate with a mixture solvent of ethylene glycol and deionized water in a hydrothermal process for different times. As the reaction proceeded, α-Co(OH)₂, CoO and metallic Co were produced. To understand the phase evolution processes from α-Co(OH)₂ to CoO and then metallic Co, a range of time-dependent experiments were carried out, and the intermediate products obtained at different reaction times were investigated in detail. The investigation revealed that CoO microspheres were actually evolved from α-Co(OH)₂ as a precursor. Just elongating the reaction time, CoO microspheres could be further reduced to metallic Co. With a pure ethylene glycol medium for the same reaction, only α-Co(OH)₂ could be generated, indicating an important role of water. When the obtained CoO microspheres were used as anode materials for lithium-ion batteries, they delivered a specific capacity of 803 mA h g^-1 at 0.1 A g^-1 with a retention of 453 mA h g^-1 after 70 cycles. Meanwhile, the magnetic properties of the obtained CoO microspheres and metallic Co were investigated, with the CoO microspheres showing an antiferromagnetic behavior and the metallic Co exhibiting ferromagnetic characteristics. This study suggested a novel method for synthesizing CoO with a uniform microsphere morphology and bulk metallic Co easily.

Cobalt hydroxide nanoflakes and their application as supercapacitors and oxygen evolution catalysts

Finding alternative routes to access and store energy has become a major issue recently. Transition metal oxides have shown promising behaviour as catalysts and supercapacitors. Recently, liquid exfoliation of bulk metal oxides appears to be an effective route which provides access to two-dimensional (2D) nano-flakes, the size of which can be easily selected. These 2D materials exhibit excellent electrochemical charge storage and catalytic activity for the oxygen evolution reaction. In this study, various sized selected cobalt hydroxide nano-flake materials are fabricated by this time efficient and highly reproducible process. Subsquently, the electrochemical properties of the standard size Co(OH)₂ nanoflakes were investigated. The oxide modified electrodes were prepared by spraying the metal oxide flake suspension onto a porous conductive support electrode foam, either glassy carbon or nickel. The cobalt hydroxide/nickel foam system was found to have an overpotential value at 10 mA cm^-2 in 1 M NaOH as low as 280 mV and an associated redox capacitance exhibiting numerical values up to 1500 F g^-1, thereby making it a viable dual use electrode.

Electrochemical growth of Co(OH)2 nanoflakes on Ni foam for methanol electro-oxidation

Co(OH)₂ nanoflakes directly grown on Ni foam using an electrodeposition route exhibit a promising performance for electrocatalytic oxidation of methanol.