Metal-Nitrogen-Carbon Catalysts of Specifically Coordinated Configurations toward Typical Electrochemical Redox Reactions

Metal-nitrogen-carbon (M-N-C) material with specifically coordinated configurations is a promising alternative to costly Pt-based catalysts. In the past few years, great progress is made in the studies of M-N-C materials, including the structure modulation and local coordination environment identification via advanced synthetic strategies and characterization techniques, which boost the electrocatalytic performances and deepen the understanding of the underlying fundamentals. In this review, the most recent advances of M-N-C catalysts with specifically coordinated configurations of M-N_x (x = 1-6) are summarized as comprehensively as possible, with an emphasis on the synthetic strategy, characterization techniques, and applications in typical electrocatalytic reactions of the oxygen reduction reaction, oxygen evolution reaction, hydrogen evolution reaction, CO₂ reduction reaction, etc., along with mechanistic exploration by experiments and theoretical calculations. Furthermore, the challenges and potential perspectives for the future development of M-N-C catalysts are discussed.

Layered Thiazolo[5,4- d] Thiazole-Linked Conjugated Microporous Polymers with Heteroatom Adoption for Efficient Photocatalysis Application

Conjugated microporous polymers (CMPs) with high surface areas, tunable building blocks, and fully conjugated structures have found important applications in optoelectronics. Here, we report a new series of CMPs with tunable band gaps by introducing thiazolo[5,4- d] thiazole as the linkage. Because they are synthetic polymers, the geometries and structures could be rationally designed. Their intrinsic wide visible-light absorption properties and layered architectures endow them with a promising photocatalytic performance. The role of geometries, surface areas, and morphologies of the CMPs in photocatalysis abilities is examined and discussed. The results indicate that geometries have a direct impact on the surface areas and morphologies of the CMPs and thus exert great influence on photocatalysis.

Two-Dimensional Porous Polymers: From Sandwich-like Structure to Layered Skeleton

Inorganic porous materials have long dominated the field of porous materials due to their stable structure and wide applications. In the past decade, porous polymers have generated considerable interest among researchers because of their easily tunable porosity, carbon-rich backbones, and prominent physical properties. These attributes enable porous polymers to be used in various applications such as sensing, gas separation and storage, catalysis, and energy storage. However, poor dispersibility has long hindered the development of porous polymers. A majority of the reported porous polymers can only be synthesized with amorphous structure through direct precipitation from solutions during reactions. The rational design and synthesis of porous polymers with controllable morphology, such as two-dimensional (2D) morphology, remains great challenge. Two-dimensional nanomaterials have attracted considerable interest because of their unique properties, which originate from the intrinsic chemical structures and 2D dimensionality. Among 2D nanomaterials, 2D porous polymers, which possess the advanced features of polymers, porous materials, and 2D nanomaterials, have been a rising star. Conventionally, polymerization strategies for generating 2D porous polymers mainly include the cross-linking of multiarmed monomers in 2D-space-confined environments, such as crystalline solid surfaces, liquid-liquid interfaces, and liquid-air interfaces. However, these methods always involve complicate operations, e.g., under vacuum, sophisticated equipment, film transfer technology, exfoliation, and so on and, most importantly, are difficult to scale up. To overcome this synthesis obstacle, 2D nanomaterials, such as graphene, can be used as 2D templates for synthesis of sandwich-like 2D porous polymers and porous carbon nanosheets. p-Bromobenzene-, p-cyanobenzene-, polyacrylonitrile-, and amino-functionalized graphene are used as templates for direct surface polymerization through reactions such as Sonogashira-Hagihara coupling reaction, condensation reaction, ionothermal reaction, reversible addition-fragmentation chain transfer polymerization, Friedel-Crafts reaction, and oxidation reaction. Therefore, sandwich-like 2D conjugated microporous polymers, Schiff-base type porous polymers, covalent triazine frameworks, hyper-cross-linked porous polymers, and mesoporous conducting polymers can be easily prepared. Beyond graphene, other excellent 2D nanomaterials, e.g., MoS₂, can also act 2D templates to construct 2D porous polymers and corresponding hybrid materials. In addition, 2D morphology for porous polymer can be achieved without 2D templates in a few cases. For instance, olefin-linkage-linked covalent organic frameworks can be synthesized through Knoevenagel condensation reaction. As is known, porous polymers can serve as carbon-rich precursors to generate heteroatom doped porous carbons for energy storage and catalysis. Thus, one benefit of 2D porous polymers is new access toward porous carbon nanosheets through direct pyrolysis without using inorganic porous templates. In this Account, we summarize recent research on 2D porous polymers and corresponding porous carbon nanosheets.

Cobalt-Doped Porous Carbon Nanosheets Derived from 2D Hypercrosslinked Polymer with CoN₄ for High Performance Electrochemical Capacitors

Cobalt-doped graphene-coupled hypercrosslinked polymers (Co-GHCP) have been successfully prepared on a large scale, using an efficient RAFT (Reversible Addition-Fragmentation Chain Transfer Polymerization) emulsion polymerization and nucleophilic substitution reaction with Co (II) porphyrin. The Co-GHCP could be transformed into cobalt-doped porous carbon nanosheets (Co-GPC) through direct pyrolysis treatment. Such a Co-GPC possesses a typical 2D morphology with a high specific surface area of 257.8 m² g^-1. These intriguing properties of transition metal-doping, high conductivity, and porous structure endow the Co-GPC with great potential applications in energy storage and conversion. Utilized as an electrode material in a supercapacitor, the Co-GPC exhibited a high electrochemical capacitance of 455 F g^-1 at a specific current of 0.5 A g^-1. After 2000 charge/discharge cycles, at a current density of 1 A g^-1, the specific capacitance increased by almost 6.45%, indicating the excellent capacitance and durability of Co-GPC. These results demonstrated that incorporation of metal porphyrin into the framework of a hypercrosslinked polymer is a facile strategy to prepare transition metal-doped porous carbon for energy storage applications.

Simple Fabrication of Titanium Dioxide/N-Doped Carbon Hybrid Material as Non-Precious Metal Electrocatalyst for the Oxygen Reduction Reaction

We report a new approach for the fabrication of hybrid titanium dioxide/carbon materials derived from a porous titanium coordination polymer composed of a catechol-substituted porphyrin and Ti⁴⁺. Titanium dioxide nanocrystals were formed distributed in a nitrogen-doped carboniferous matrix after the thermolysis of the coordination polymer. The identity of the titanium dioxide phase, i.e., anatase or rutile, could be controlled by varying the thermolysis temperature. Electrochemical performances of the composites were explored with results demonstrating that the hybrid materials are promising cathodic materials for the oxygen reduction reaction.