Hyper-Crosslinked Porous Organic Nanomaterials: Structure-Oriented Design and Catalytic Applications

Hyper-crosslinked porous organic nanomaterials, especially the hyper-crosslinked polymers (HCPs), are a unique class of materials that combine the benefits of high surface area, porous structure, and good chemical and thermal stability all rolled into one. A wide range of synthetic methods offer an enormous variety of HCPs with different pore structures and morphologies, which has allowed HCPs to be developed for gas adsorption and separations, chemical adsorption and encapsulation, and heterogeneous catalysis. Here, we present a systematic review of recent approaches to pore size modulation and morphological tailoring of HCPs and their applications to catalysis. We mainly compare the effects of pore size modulation and morphological tailoring on catalytic applications, aiming to pave the way for researchers to develop HCPs with an optimal performance for modern applications.

Porous Structure of β-Cyclodextrin for CO2 Capture: Structural Remodeling by Thermal Activation

With a purpose of extending the application of β-cyclodextrin (β-CD) for gas adsorption, this paper aims to reveal the pore formation mechanism of a promising adsorbent for CO2 capture which was derived from the structural remodeling of β-CD by thermal activation. The pore structure and performance of the adsorbent were characterized by means of SEM, BET and CO2 adsorption. Then, the thermochemical characteristics during pore formation were systematically investigated by means of TG-DSC, in situ TG-FTIR/FTIR, in situ TG-MS/MS, EDS, XPS and DFT. The results show that the derived adsorbent exhibits an excellent porous structure for CO2 capture accompanied by an adsorption capacity of 4.2 mmol/g at 0 °C and 100 kPa. The porous structure is obtained by the structural remodeling such as dehydration polymerization with the prior locations such as hydroxyl bonded to C6 and ring-opening polymerization with the main locations (C4, C1, C5), accompanied by the release of those small molecules such as H2O, CO2 and C3H4. A large amount of new fine pores is formed at the third and fourth stage of the four-stage activation process. Particularly, more micropores are created at the fourth stage. This revealed that pore formation mechanism is beneficial to structural design of further thermal-treated graft/functionalization polymer derived from β-CD, potentially applicable for gas adsorption such as CO2 capture.

Macrocycle-Based Porous Organic Polymers for Separation, Sensing, and Catalysis

With the rapid development of materials science, porous organic polymers (POPs) have received remarkable attentions because of their unique properties such as the exceptionally high surface area and flexible molecular design. The ability to incorporate specific functions in a precise manner makes POPs promising platforms for a myriad of applications in molecular adsorption, separation, and catalysis. Therefore, many different types of POPs have been rationally designed and synthesized to expand the scope of advanced materials, endowing them with distinct structures and properties. Recently, supramolecular macrocycles with excellent host-guest complexation abilities are emerging as powerful crosslinkers for developing novel POPs with hierarchical structures and improved performance, which can be well-organized at different spatial scales. Macrocycle-based POPs could have unusual porous, adsorptive, and optical properties when compared to their nonmacrocycle-incorporated counterparts. This cooperation provides valuable insights for the molecular-level understanding of skeletal complexity and diversity. Here, the research advances of macrocycle-based POPs are aptly summarized by showing their syntheses, properties, and applications in terms of separation, sensing, and catalysis. Finally, the current challenging issues in this exciting research field are delineated and a comprehensive outlook is offered for their future directions.

Macrocycle-derived hierarchical porous organic polymers: synthesis and applications

Porous organic polymers (POPs), as a new category of advanced porous materials, have received broad research interests owing to the advantages of light-weight, robust scaffolds, high specific surface areas and good functional tailorability. According to the long-range ordering of polymer skeletons, POPs can be either crystalline or amorphous. Macrocycles with inherent cavities can serve as receptors for recognizing or capturing specific guest molecules through host-guest interactions. Incorporating macrocycles in POP skeletons affords win-win merits, e.g. hierarchical porosity and novel physicochemical properties. In this review, we focus on the recent progress associated with new architectures of macrocycle-based POPs. Herein, these macrocycles are divided into two subclasses: non-planar (crown ether, calixarene, pillararene, cyclodextrin, cyclotricatechylene, etc.) and planar (arylene-ethynylene macrocycles). We summarize the synthetic methods of each macrocyclic POP in terms of the functions of versatile building blocks. Subsequently, we discuss the performance of macrocyclic POPs in environmental remediation, gas adsorption, heterogeneous catalysis, fluorescence sensing and ionic conduction. Although considerable examples are reported, the development of macrocyclic POPs is still in its infancy. Finally, we propose the underlying challenges and opportunities of macrocycle-based POPs.

Atomistic structure generation of covalent triazine-based polymers by molecular simulation

The structures of amorphous materials are generally difficult to characterize and comprehend due to their unordered nature and indirect measurement techniques. However, molecular simulation has been considered as an alternative method that can provide molecular-level information supplementary to experimental techniques. In this work, a new approach for modelling the atomistic structures of amorphous covalent triazine-based polymers is proposed and employed on two experimentally synthesized covalent triazine-based polymers. To examine the proposed modelling approach, the properties of the established models, such as surface areas, pore volumes, structure factors and N₂ adsorption isotherms, were calculated and compared with the experimental data. Excellent consistencies were observed between the simulated models and experimental samples, consequently validating the proposed models and the modelling approach. Moreover, the proposed modelling approach can be applied to new covalent triazine-based polymers for predictive purposes and to provide design strategies for future synthesis works.

A well-established modelling approach to construct and predict the structures of amorphous covalent triazine-based polymers is proposed.

Highly Porous Hypercrosslinked Polymers Derived from Biobased Molecules

Highly porous and hyper-cross-linked polymers (HCPs) have a range of applications and are typically synthesized in an unsustainable manner. Herein, HCPs were synthesized from abundant biobased or biorelated compounds in sulfolane with iron(III) chloride as Lewis acid catalyst. As reactants, quercetin, tannic acid, phenol, 1,4-dimethoxybenzene, glucose, and a commercial bark extract were used. The HCPs had high CO₂ uptake (up to 3.94 mmol g^-1 at 0 °C and 1 bar), total pore volumes (up to 1.86 cm³  g^-1 ), and specific surface areas (up to 1440 m²  g^-1 ). ¹ H NMR, ¹³ C NMR, and IR spectroscopy, wide-angle X-ray scattering, elemental analysis, and SEM revealed, for example, that the HCPs consisted of amorphous and cross-linked aromatic and phenolic structures with significant contents of aliphatics, oxygen, and sulfur.

Hyper-Cross-Linked Polymer with Enhanced Porosity by In Situ Removal of Trimethylsilyl Group via Electrophilic Aromatic Substitution

We report the synthesis of microporous hyper-cross-linked polymers (HCPs) with increased specific surface area and porosity by the in situ removal of trimethylsilyl (TMS) groups during hyper-cross-linking. We synthesized poly(4-trimethylsilylstyrene-co-vinylbenzyl chloride-co-divinylbenzene)s (P(TMSS-co-VBzCl-co-DVB)s) with different compositions by reversible addition-fragmentation chain transfer copolymerization and converted them into HCPs by reacting with FeCl₃ in 1,2-dichloroethane. The nearly quantitative removal of the TMS groups was observed during the reaction following the electrophilic aromatic substitution mechanism, where the TMS group shows higher reactivity than an aromatic hydrogen. Substantial enhancement in pore characteristics including surface area, microporosity, and mesoporosity was noticed up to a certain level of TMSS incorporation, compared with HCP derived from P(VBzCl-co-DVB). We suggest the porogenic TMS group increases porosity mainly by in situ removal via facilitated substitution reaction, which creates permanent voids in the hyper-cross-linked network. The use of TMSS provides a feasible and complementary route to tuning the pore characteristics of HCPs by varying DVB content, and is applicable to the synthesis of hierarchically porous polymers containing micropores within a mesoporous framework from block polymer precursors.

A green sorbent for CO2 capture: α-cyclodextrin-based carbonate in DMSO solution

α-Cyclodextrin dissolved in DMSO is a potential sorbent for CO₂ capture through the exclusive formation of ionic organic carbonate.

Theoretical and experimental studies on the separation of cinnamyl acetate and cinnamaldehyde by adsorption onto a β-cyclodextrin polyurethane polymer

CAc and CA were separated using CDPU as adsorbent, and the mechanism was proposed through DFT calculations and experimental analyses.