The Effect of WS2 Nanosheets on the Non-Isothermal Cold- and Melt-Crystallization Kinetics of Poly(l-lactic acid) Nanocomposites

In the present work, hybrid nanocomposite materials were obtained by a solution blending of poly(l-lactic acid) (PLLA) and layered transition-metal dichalcogenides (TMDCs) based on tungsten disulfide nanosheets (2D-WS2) as a filler, varying its content between 0 and 1 wt%. The non-isothermal cold- and melt-crystallization and melting behavior of PLLA/2D-WS2 were investigated. The overall crystallization rate, final crystallinity, and subsequent melting behavior of PLLA were controlled by both the incorporation of 2D-WS2 and variation of the cooling/heating rates. In particular, the analysis of the cold-crystallization behavior of the PLLA matrix showed that the crystallization rate of PLLA was reduced after nanosheet incorporation. Unexpectedly for polymer nanocomposites, a drastic change from retardation to promotion of crystallization was observed with increasing the nanosheet content, while the melt-crystallization mechanism of PLLA remained unchanged. On the other hand, the double-melting peaks, mainly derived from melting-recrystallization-melting processes upon heating, and their dynamic behavior were coherent with the effect of 2D-WS2 involved in the crystallization of PLLA. Therefore, the results of the present study offer a new perspective for the potential of PLLA/hybrid nanocomposites in targeted applications.

Nanocomposite Materials with Poly(l-lactic Acid) and Transition-Metal Dichalcogenide Nanosheets 2D-TMDCs WS2

Layered transition-metal dichalcogenides (TMDCs) based on tungsten disulfide nanosheets (2D-WS2) were introduced via melt processing into poly(l-lactic acid) (PLLA) to generate PLLA/2D-WS2 nanocomposite materials. The effects of the 2D-WS2 on the morphology, crystallization, and biodegradation behavior of PLLA were investigated. In particular, the non-isothermal melt-crystallization of neat PLLA and PLLA/2D-WS2 nanocomposites were analyzed in detail by varying both the cooling rate and 2D-WS2 loading. The kinetic parameters of PLLA chain crystallization are successfully described using the Liu model. It was found that the PLLA crystallization rate was reduced with 2D-WS2 incorporation, while the crystallization mechanism and crystal structure of PLLA remained unchanged in spite of nanoparticle loading. This was due to the PLLA chains not being able to easily adsorb on the WS2 nanosheets, hindering crystal growth. In addition, from surface morphology analysis, it was observed that the addition of 2D-WS2 facilitated the enzymatic degradation of poorly biodegradable PLLA using a promising strain of actinobacteria, Lentzea waywayandensis. The identification of more suitable enzymes to break down PLLA nanocomposites will open up new avenues of investigation and development, and it will also lead to more environmentally friendly, safer, and economic routes for bioplastic waste management.

Preparation of high-performance polyethylene tubes under the coexistence of silicone cross-linked polyethylene and rotation extrusion

In this study, the silicone cross-linked polyethylene (Si-XLPE) powder with better thermoplastic performance and abundant cross-linked network points was attained by using solid-state shear mechanochemical (S³M) technology and it was added into high-density polyethylene (HDPE) matrix to prepare Si-XLPE/HDPE tubes by a rotation extrusion rheometer. SEM and 2D-SAXS experiments showed that the presence of Si-XLPE and rotation extrusion facilitated the formation of stable shish-kebabs which deviated from the axial direction in polyethylene (PE) tubes. This result was interpreted that introduction of Si-XLPE in PE tubes provided abundant molecular cross-linked network structures, which suppressed the thermal movement and relaxation of oriented molecular chains owing to intermolecular interaction. Moreover, the axial and hoop flow field further promoted orientation of the permanent cross-linked network entanglement points and formation of more stable cluster-like shish structures in the off-axial direction during the rotation extrusion process. Besides, our experimental results had also ascertained that molecular orientation and shish-kebabs in off-axial direction should be the primary responsibility for the remarkable enhancement of hoop torsional strength in PE tubes. Hoop torsional strength of PE tubes adding Si-XLPE reached 19.58 MPa when the mandrel rotation rate was 30 r.p.m., while that of conventional extruded PE tubes was only 9.83 MPa. As a consequence, PE tubes with excellent performance were prepared under the combined effect of Si-XLPE and rotation extrusion.