Synthesis and Characterization of MOF-Derived Structures: Recent Advances and Future Perspectives

Due to their facile tunability, metal-organic frameworks (MOFs) are employed as precursors and templates to construct advanced functional materials with unique and desired chemical, physical, mechanical, and morphological properties. By tuning MOF precursor composition and manipulating conversion processes, various MOF-derived materials commonly known as MOF derivatives can be constructed. The possibility of controlled and predictable properties makes MOF derivatives a preferred choice for numerous advanced technological applications. The innovative synthetic designs besides the plethora of interdisciplinary characterization approaches applicable to MOF derivatives provide the opportunity to perform a myriad of experiments to explore the performance and offer key insight to develop the next generation of advanced materials. Though there are many published works of literature describing various synthesis and characterization techniques of MOF derivatives, it is still not clear how the synthesis mechanism works and what are the best techniques to characterize these materials to probe their properties accurately. In this review, the recent development in synthesis techniques and mechanisms for a variety of MOF derivates such as MOF-derived metal oxides, porous carbon, composites/hybrids, and sulfides is summarized. Furthermore, the details of characterization techniques and fundamental working principles are summarized to probe the structural, mechanical, physiochemical, electrochemical, and electronic properties of MOF and MOF derivatives. The future trends and some remaining challenges in the synthesis and characterization of MOF derivatives are also discussed.

Thermally activated structural phase transitions and processes in metal-organic frameworks

The structural knowledge of metal-organic frameworks is crucial to the understanding and development of new efficient materials for industrial implementation. This review classifies and discusses recent advanced literature reports on phase transitions that occur during thermal treatments on metal-organic frameworks and their characterisation. Thermally activated phase transitions and procceses are classified according to the temperaturatures at which they occur: high temperature (reversible and non-reversible) and low temperature. In addition, theoretical calculations and modelling approaches employed to better understand these structural phase transitions are also reviewed.

CuO/Cu-MOF nanocomposite for highly sensitive detection of nitric oxide released from living cells using an electrochemical microfluidic device

The integration of large surface area and high catalytic profiles of Cu-MOF and CuO nanoparticles is described toward electrochemical sensing of nitric oxide (NO) in a microfluidic platform. The CuO/Cu-MOF nanocomposite was prepared through hydrothermal method, and its formation was confirmed by scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray powder diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and energy-dispersive X-ray spectroscopy (EDS). The CuO/Cu-MOF nanostructured modified Au electrodes enabled electrocatalytic NO oxidation at 0.6 V vs. reference electrode, demonstrating linear response over a broad concentration range of 0.03-1 μM and 1-500 μM with a detection limit of 7.8 nM. The interference effect of organic molecules and common ions was negligible, and the sensing system demonstrated excellent stability. Finally, an electrochemical microfluidic NO sensor was developed to detect of NO released from cancer cells, which were stimulated by L-arginine. Furthermore, in the presence of Fe³⁺, the stressed cells produced more NO. This work offers considerable potential for its practical applications in clinical diagnostics through determination of chemical symptoms in microliter-volume biological samples. Electrochemical microfluidic NO sensor was developed for detection of NO released from cancer cells. This miniaturized device consumes less materials and provides the basis for greener analytical chemistry.

Electrospun pectin/modified copper-based metal-organic framework (MOF) nanofibers as a drug delivery system

Pectin has been regarded as a drug carrier accelerating the healing process due to its bioactivities, abundance and lower cost of resources. However, a big challenge related to its practical application is its poor mechanical strength. In this study the modified Cu-based MOF containing Folic acid was synthesized and incorporated in the suitable pectin electrospun nanofibers which not only improved the copper ions release behavior but also made the fiber mat stronger, antibacterial and induce angiogenesis, fibroblast migration, and proliferation due to loaded copper ions and folic acid. The nanofibers composing of 75% pectin and 4000 kDa -PEO were chosen after morphological and mechanical characterization. Finally, the effect of MOF incorporation on the nanocomposite samples was characterized in terms of morphological, physiochemical and biological properties. The nanofibrous mats were evaluated by tensile testing, antibacterial and cytotoxicity. The release behavior of copper ions and folic acid was controlled and their burst release alleviated reducing cytotoxicity in vitro. It was found that the Young's moduli of the pectin nanofibers were improved to 19.13 MPa by the addition of Cu-based MOFs. Moreover, nanocomposite pectin nanofibers were found to be antibacterial and biocompatible. These results demonstrate that MOF-contained pectin nanofibers are promising for biomedical applications.

Electrode Materials for Supercapacitors: A Review of Recent Advances

The advanced electrochemical properties, such as high energy density, fast charge–discharge rates, excellent cyclic stability, and specific capacitance, make supercapacitor a fascinating electronic device. During recent decades, a significant amount of research has been dedicated to enhancing the electrochemical performance of the supercapacitors through the development of novel electrode materials. In addition to highlighting the charge storage mechanism of the three main categories of supercapacitors, including the electric double-layer capacitors (EDLCs), pseudocapacitors, and the hybrid supercapacitors, this review describes the insights of the recent electrode materials (including, carbon-based materials, metal oxide/hydroxide-based materials, and conducting polymer-based materials, 2D materials). The nanocomposites offer larger SSA, shorter ion/electron diffusion paths, thus improving the specific capacitance of supercapacitors (SCs). Besides, the incorporation of the redox-active small molecules and bio-derived functional groups displayed a significant effect on the electrochemical properties of electrode materials. These advanced properties provide a vast range of potential for the electrode materials to be utilized in different applications such as in wearable/portable/electronic devices such as all-solid-state supercapacitors, transparent/flexible supercapacitors, and asymmetric hybrid supercapacitors.

Anion-induced morphological regulation of cupric oxide nanostructures and their application as co-catalysts for solar water splitting

Morphological control of nanomaterials is essential for their properties and potential applications, and many strategies have been developed. In this work, a new strategy for simultaneously preparing and modulating the morphological structure evolution of copper layered hydroxyl salts and oxides is introduced. By changing the nature of the anions in the electroplating solution, significant variations in the size and porosity of nanosheets are achieved. Porous CuO nanosheets with a higher surface area were obtained by the use of copper nitrate as a copper source, while CuO nanoflakes were produced from copper sulfate. Photoanodes combining these porous CuO nanomaterials and a typical light absorber (BiVO₄) exhibited good morphology-dependent activities for photoelectrochemical water splitting. The composite electrode displays a negative shift of 180 mV for the onset potential and an approximately 2-fold enhancement in the photocurrent compared to the bare BiVO₄. The charge recombination rate in the photoelectrode with the porous CuO nanosheets was significantly lower than the bare photoanode due to the favorable electron diffusion path and effective charge collection. This research offers an effective method for constructing a highly active photoelectrocatalytic system for overall water splitting.

Normal-pulse-voltage-assisted in situ fabrication of graphene-wrapped MOF-derived CuO nanoflowers for water oxidation

Herein, a normal-pulse-voltage-assisted method is proposed for preparation of high quality graphene-wrapped CuO nanoflowers on CF. The as-obtained CuO NF@G/CF electrode exhibits a competitive OER catalytic performance in 1.0 M KOH solution.

Engineering Metal-Organic Framework Catalysts for C-C and C-X Coupling Reactions: Advances in Reticular Approaches from 2014-2018

Metal-organic frameworks (MOFs) are a class of crystalline porous materials that have been actively used for several industrial and synthetic applications. MOFs are spatially and geometrically extrapolated coordination polymers with intriguing properties such as tunable porosity and dimensionality. In terms of their catalytic efficiency, MOFs combine the easy recoverability of heterogeneous catalysts with the increased selectivity of biological catalysts. It is therefore not surprising that a lot of work on optimizing MOF catalysts for organic transformations has been carried out over the past decade. In this review, recent developments in MOF catalysis are summarized, with special attention being paid to C-C, C-N, and C-O coupling reactions. The influence of pore size, pore environment, and load on catalytic activity is described. Post-synthetic stabilization techniques and host-guest interactions in caged MOF scaffolds are detailed. Mechanistic aspects pertaining to the use of MOFs in asymmetric heterogeneous catalysis are highlighted and categorized.

Synthesis of core–shell ZIF-67@Co-MOF-74 catalyst with controllable shell thickness and enhanced photocatalytic activity for visible light-driven water oxidation

Core–shell ZIF-67@Co-MOF-74 catalysts with improved photocatalytic properties were synthesized via the ligand exchange method.

MOF-templated syntheses of porous Co3O4 hollow spheres and micro-flowers for enhanced performance in supercapacitors

In this work, two kinds of MOF micro-precursors (Co-BTB-I, micro-spheres; Co-BTB-II, micro-flowers) have been synthesized with/without surfactant. After the direct pyrolysis, the hollow spherical Co-BTB-I-450 exhibits a better supercapacitor performance.

Metal-Organic Framework-Derived Nanoporous Metal Oxides toward Supercapacitor Applications: Progress and Prospects

Transition metal oxides (TMOs) have attracted significant attention for energy storage applications such as supercapacitors due to their good electrical conductivity, high electrochemical response (by providing Faradaic reactions), low manufacturing costs, and easy processability. Despite exhibiting these attractive characteristics, the practical applications of TMOs for supercapacitors are still relatively limited. This is largely due to their continuous Faradaic reactions, which can lead to major changes or destruction of their structure as well phase changes (in some cases) during cycling, leading to the degradation in their capacitive performance over time. Hence, there is an immediate need to develop new synthesis methods, which will readily provide stable porous architectures, controlled phase, as well as useful control over dimensions (1-D, 2-D, and 3-D) of the metal oxides for improving their performance in supercapacitor applications. Since its discovery in late 1990s, metal-organic frameworks (MOFs) have influenced many fields of material science. In recent years, they have gained significant attention as precursors or templates for the derivation of porous metal oxide nanostructures and nanocomposites for next-generation supercapacitor applications. Even though these materials have widespread applications and have been widely studied in terms of their structural features and synthesis, it is still not clear how these materials will play an important role in the development of the supercapacitor field. In this review, we will summarize the recent developments in the field of MOF-derived porous metal oxide nanostructures and nanocomposites for supercapacitor applications. Furthermore, the current challenges along with the future trends and prospects in the application of these materials for supercapacitors will also be discussed.

A new preparation of a bifunctional crystalline heterogeneous copper electrocatalyst by electrodeposition using a Robson-type macrocyclic dinuclear copper complex for efficient hydrogen and oxygen evolution from water

Electro-deposited Cu(OH)₂/Cu₂O-based thin film on FTO with the macrocyclic dicopper complex shows excellent water splitting activity in excellent Faradaic efficiency.

Sorption and photodegradation under visible light irradiation of an organic pollutant by a heterogeneous UiO-67–Ru–Ti MOF obtained by post-synthetic exchange

By exchanging metals in a photoactive MOF, it has been possible to obtain a material for the photodegradation of methylene blue.

A pyrene-modified cobalt salophen complex immobilized on multiwalled carbon nanotubes acting as a precursor for efficient electrocatalytic water oxidation

Highly efficient electrocatalytic water oxidation with an immobilized pyrene-modified cobalt salophen complex: molecular catalysis or heterogeneous catalysis?