Strong metal oxide-zeolite interactions during selective catalytic reduction of nitrogen oxides

In response to the stricter EU VII emission standards and the "150 ℃ challenge", selective catalytic reduction by ammonia (NH3-SCR) catalysts for motor vehicles are required to achieve high NO conversion below 200 °C. Compounding metal oxides with zeolites is an important strategy to design the low-temperature SCR catalysts. Here, we original prepared Cu-SSZ-13 @ MnGdOx (Cu-Z @ MGO), which achieved over 90% NO conversion and 95% N2 selectivity at 150 ℃. It has been demonstrated that a uniform mesoporous loaded layer of MGO grows on Cu-Z, and a recrystallization zone appears at the MGO-Cu-Z interface. We discover that the excellent low-temperature SCR activity derives from the strong metal oxide-zeolite interaction (SMZI) effects. The SMZI effects cause the anchor and high dispersion of MGO on the surface of Cu-Z. Driven by the SMZI effects, the Mn3+/Mn4+ redox cycle ensures the low and medium temperature-SCR activity and the Cu2+/Cu+ redox cycle guarantees the medium and high temperature-SCR activity. The introduction of MGO improves the reaction activity of -NH2 species adsorbed at Mn sites at 150 ℃, achieving a cycle of reduction and oxidation reactions at low temperatures. This strategy of inducing SMZI effects of metal oxides and zeolites paves a way for development of high-performance catalysts.

Recent progress of low-temperature selective catalytic reduction of NOx with NH3 over manganese oxide-based catalysts

Selective catalytic reduction with NH3 (NH3−SCR) was the most efficient approach to mitigate the emission of nitrogen oxides (NOx). Although the conventional manganese oxide-based catalyst had gradually become a kind...

A review of Mn-based catalysts for low-temperature NH3-SCR: NOx removal and H2O/SO2 resistance

The development of high-efficiency catalysts is the key to the low-temperature NH₃-SCR technology. The introduction of SO₂ and H₂O will lead to poisoning and deactivation of the catalysts, which severely limits the development and application of NH₃-SCR technology. This review introduces the necessity of NO_x removal, explains the mechanisms of H₂O and SO₂ poisoning on NH₃-SCR catalysts, highlights the Mn-based catalysts of different active metals and supports and their resistance to H₂O and SO₂, and analyses the relationship between metal modification, selection of support and preparation method, morphology and structure design and SO₂/H₂O resistance. Given the current problems, this review points out the future research focus of Mn-based catalysts and also puts forward corresponding countermeasures to solve the existing problems.

Synergistic effect of VOx and MnOx surface species for improved performance of V2O5/Ce0.5Ti0.5−xMnxO2−δ catalysts in low-temperature NH3-SCR of NO

Inserting adjacent Mn³⁺/Mn²⁺ and VO³⁺/VO²⁺ redox couples in Ce_1−xTi_xO₂ improves catalytic performance.

The enhanced resistance to P species of an Mn–Ti catalyst for selective catalytic reduction of NOx with NH3 by the modification with Mo

The modification of Mn–Ti catalyst by Mo could enhance its resistance to P species.