Surface Modification of Nano-Hydroxyapatite/Polymer Composite for Bone Tissue Repair Applications: A Review

Nano-hydroxyapatite (n-HA) is the main inorganic component of natural bone, which has been widely used as a reinforcing filler for polymers in bone materials, and it can promote cell adhesion, proliferation, and differentiation. It can also produce interactions between cells and material surfaces through selective protein adsorption and has therefore always been a research hotspot in orthopedic materials. However, n-HA nano-particles are inherently easy to agglomerate and difficult to disperse evenly in the polymer. In addition, there are differences in trace elements between n-HA nano-particles and biological apatite, so the biological activity needs to be improved, and the slow degradation in vivo, which has seriously hindered the application of n-HA in bone fields, is unacceptable. Therefore, the modification of n-HA has been extensively reported in the literature. This article reviewed the physical modification and various chemical modification methods of n-HA in recent years, as well as their modification effects. In particular, various chemical modification methods and their modification effects were reviewed in detail. Finally, a summary and suggestions for the modification of n-HA were proposed, which would provide significant reference for achieving high-performance n-HA in biomedical applications.

A Closed Loop Stimuli-Responsive Concanavalin A-Loaded Chitosan-Pluronic Hydrogel for Glucose-Responsive Delivery of Short-Acting Insulin Prototyped in RIN-5F Pancreatic Cells

The optimal treatment of diabetes (in particular, type 1 diabetes-T1D) remains a challenge. Closed-loop systems (implants/inserts) provide significant advantages for glucose responsivity and providing real-time sustained release of rapid-acting insulin. Concanavalin A (ConA), a glucose affinity agent, has been used to design closed-loop insulin delivery systems but not without significant risk of leakage of ConA from the matrices and poor mechanical strength of the hydrogels impacting longevity and control of insulin release. Therefore, this work focused on employing a thermoresponsive co-forming matrix between Pluronic F-127 (PL) and structurally robust chitosan (CHT) via EDC/NHS coupling (i.e., covalent linkage of -NH2 from CHT and ConA to the -COOH of PL). The system was characterized for its chemical structure stability and integrity (FTIR, XRD and TGA), injectability, rheological parameters and hydrogel morphology (Texture Analysis, Elastosens TM Bio2 and SEM). The prepared hydrogels demonstrated shear-thinning for injectability with a maximum force of 4.9 ± 8.3 N in a 26G needle with sol-gel transitioning from 25 to 38 °C. The apparent yield stress value of the hydrogel was determined to be 67.47 Pa. The insulin loading efficiency within the hydrogel matrix was calculated to be 46.8%. Insulin release studies revealed glucose responsiveness in simulated glycemic media (4 and 10 mg/mL) over 7 days (97%) (305 nm via fluorescence spectrophotometry). The MTT studies were performed over 72 h on RIN-5F pancreatic cells with viability results >80%. Results revealed that the thermoresponsive hydrogel is a promising alternative to current closed-loop insulin delivery systems.

Hydrothermal Synthesis and In Vivo Fluorescent Bioimaging Application of Eu3+/Gd3+ Co-Doped Fluoroapatite Nanocrystals

In this study, Eu3+/Gd3+ co-doped fluoroapatitååe (Eu/Gd:FAP) nanocrystals were synthesized by the hydrothermal method as a fluorescent bioimaging agent. The phase composition, morphology, fluorescence, and biosafety of the resulting samples were characterized. Moreover, the in vivo fluorescent bioimaging application of Eu/Gd:FAP nanocrystals was evaluated in mice with subcutaneously transplanted tumors. The results showed that the Eu/Gd:FAP nanocrystals were short rod-like particles with a size of 59.27 ± 13.34 nm × 18.69 ± 3.32 nm. With an increasing F substitution content, the Eu/Gd:FAP nanocrystals displayed a decreased size and enhanced fluorescence emission. Eu/Gd:FAP nanocrystals did not show hemolysis and cytotoxicity, indicating good biocompatibility. In vivo fluorescent bioimaging study demonstrated that Eu/Gd:FAP nanocrystals could be used as a bioimaging agent and displayed stable fluorescence emitting in tumors, indicating an accumulation in tumor tissue due to the passive targeting ability. In addition, any adverse effects of Eu/Gd:FAP nanocrystals on major organs were not observed. This study shows that biocompatible rare earth co-doped FAP nanocrystals have the potential to be used as a bioimaging agent in vivo.

Thermally induced silane dehydrocoupling on porous silicon nanoparticles for ultra-long-acting drug release

Here, we report an ultra-long-acting drug release nano-formulation based on porous silicon nanoparticles (pSiNPs) that are prepared by thermally induced silane dehydrocoupling and lipid-coating. This robust formulation offers the ability to release an anticancer drug, for up to 2 weeks, in various biological environments; pH 7.4 buffer, cancer cells, and tumor xenograft model.

Electrospun vancomycin-loaded nanofibers for management of methicillin-resistant Staphylococcus aureus-induced skin infections

Skin damage exposes the underlying layers to bacterial invasion, leading to skin and soft tissue infections. Several pathogens have developed resistance against conventional topical antimicrobial treatments and rendered them less effective. Recently, several nanomedical strategies have emerged as a potential approach to improve therapeutic outcomes of treating bacterial skin infections. In the current study, nanofibers were utilized for topical delivery of the antimicrobial drug vancomycin and evaluated as a promising tool for treatment of topical skin infections. Vancomycin-loaded nanofibers were prepared via electrospinning technique, and vancomycin-loaded nanofibers of the optimal composition exhibited nanosized uniform smooth fibers (ca. 200 nm diameter), high drug entrapment efficiency and sustained drug release patterns over 48 h. In vitro cytotoxicity assays, using several cell lines, revealed the biocompatibility of the drug-loaded nanofibers. In vitro antibacterial studies showed sustained antibacterial activity of the vancomycin-loaded nanofibers against methicillin-resistant Staphylococcus aureus (MRSA), in comparison to the free drug. The nanofibers were then tested in animal model of superficial MRSA skin infection and demonstrated a superior antibacterial efficiency, as compared to animals treated with the free vancomycin solution. Hence, nanofibers might provide an efficient nanodevice to overcome MRSA-induced skin infections and a promising topical delivery vehicle for antimicrobial drugs.

Comparative Study on Factors Governing Binding Mechanisms in Polylactic Acid-Hydroxyapatite and Polyethylene-Hydroxyapatite Systems via Molecular Dynamics Simulations

Binding mechanisms in polylactic acid-hydroxyapatite (PLA-HAp) and polyethylene-hydroxyapatite (PE-HAp) systems are comparatively elucidated on HAp (110) surfaces in unprecedented detail using molecular dynamics simulations conducted with the systematically varying number of monomers (N) between 10 and 400 at 310 K (NVT). Although PE seems to gradually cover the HAp surface more effectively compared to PLA, evident from the corresponding radius of gyration and occupied area values, the interface density and total binding energy in PLA-HAp systems is higher compared to those of PE-HAp systems. It is shown that a linear relationship between the binding energy and the surface area occupied by the monomer exists, consistent with our finding that binding energy converges to a limiting value with respect to monomer size on a constant surface area. The major constituent of the total binding energy is, rather surprisingly, shown to be the energy change in the bulk structure in HAp upon interaction; the next most important contributor is found to be the energy corresponding to surface-polymer interactions. The interplay between mainly these two contributors, acting in different fashions in two systems investigated here, seems to control the total binding energies. Increasing monomer size N initially results in enhanced densification of the interface in the HAp-PLA system up until N ≈ 200 with the positioning of mainly ═O units of PLA onto the HAp surface, consistent with the increasing Ca-O coordination numbers. Further increases in PLA size (N > 200) result in decreasing intensities of the peaks in the concentration profile consistent with the decreasing surface-polymer interaction energies while increased stabilization of the energy of the bulk is pronounced in this region. On the other hand, increasing N leads to a constantly increasing concentration at the interface in PE-HAp systems; -H atoms of the PE chain are positioned closer to the HAp surface than are -C atoms. These changes are coupled with increasing surface-polymer interaction energies in PE-HAp complexes, while slight destabilization in the energy of the bulk is observed for N > 100. A detailed examination of binding mechanisms in these technologically important systems as presented here is essential in material discovery; this valuable information, that will not be available from experiments can be attained through molecular simulations. The current study, to the best of our knowledge, comprises one of the first steps in achieving this goal for PLA/PE-HAp systems.

Inkjet-printed co-continuous mesoporous oxides for high-current power transistors

Limited printing resolution has always been a major hindrance for printed electronics; irrespective of the high mobility demonstrated by solution-processed semiconductors, long-channel printed field-effect transistors (FETs) have demonstrated low On-state conductance and switching speeds. Although various concepts have been proposed to obtain narrow-channel printed FETs, the actual demonstration of high On-currents/channel conductance has been rare. In this context, herein, we report a general recipe to print co-continuous mesoporous structures with high surface-to-volume ratios for the first time for a large range of metallic and semiconducting oxides, both n- and p-type; next, by exploiting an innovative transistor architecture by printing an additional silver layer on top of the printed porous channel, we reduced the necessary length of electronic transport through the semiconductor material to a short vertical distance of the order of a few tens of nanometres. Basically, when a composite solid polymer electrolyte was used as a gate insulator, we essentially obtained channel length-independent transport with the unprecedented On-current of 67 μA μm^-1 and transconductance of 143 μS μm^-1 at the supply voltage of only 0.5 V. Among others, one may foresee the usage of these devices in high power switches and for drawing power from batteries in all-printed electronic circuits.

Dual Interactions of Amphiphilic Gelatin Copolymer and Nanocurcumin Improving the Delivery Efficiency of the Nanogels

Herein, a new process to manufacture multicore micelles nanoparticles reinforced with co-assembly via hydrophobic interaction and electrostatic interaction under the help of ultrasonication was developed. The precise co-assembly between negative/hydrophobic drug and positive charged amphiphilic copolymer based pluronic platform allows the formation of complex micelles structures as the multicore motif with predefined functions. In this study, curcumin was selected as a drug model while positively charged copolymer was based on a pluronic-conjugated gelatin with different hydrophobicity length of Pluronic F87 and Pluronic F127. Under impact of dual hydrophobic and electrostatic interactions, the nCur-encapsulated core-shell micelles formed ranging from 40 nm to 70 nm and 40-100 nm by transmission electron microscopy (TEM) and Dynamic Light Scattering (DLS), respectively. It is found that the structures emerged depended on the relative lengths of the hydrophobic blocks in pluronic. Regarding g2(τ) behavior from DLS measurement, the nanogels showed a high stability in spherical form. Surprisingly, the release profiles showed a sustainable behavior of Cur from this system for drug delivery approaches. In vitro study exhibited that nCur-encapsulated complex micelles increased inhibitory activity against cancer cells growth with IC50 is 4.02 ± 0.11 mg/L (10.92 ± 0.3 µM) which is higher than of free curcumin at 9.40 ± 0.17 mg/L (25.54 ± 0.18 µM). The results obtained can provide the new method to generate the hierarchical assembly of copolymers with incorporated loading with the same property.

Eggshell Based Nano-Engineered Hydroxyapatite and Poly(lactic) Acid Electrospun Fibers as Potential Tissue Scaffold

Nanocomposite electrospun fibers were fabricated from poly(lactic) acid (PLA) and needle-like hydroxyapatite nanoparticles made from eggshells. The X-ray diffraction spectrum and the scanning electron micrograph showed that the hydroxyapatite particles are highly crystalline and are needle-liked in shape with diameters between 10 and 20 nm and lengths ranging from 100 to 200 nm. The microstructural, thermal, and mechanical properties of the electrospun fibers were characterized using scanning electron microscope (SEM), thermogravimetric analysis (TGA), dynamic scanning calorimetry (DSC), and tensile testing techniques. The SEM study showed that both pristine and PLA/EnHA fibers surfaces exhibited numerous pores and rough edges suitable for cell attachment. The presence of the rod-liked EnHA particles was found to increase thermal and mechanical properties of PLA fibers relative to pristine PLA fibers. The confocal optical images showed that osteoblast cells were found to attach on dense pristine PLA and PLA/HA-10 wt% fibers after 48 hours of incubation. The stained confocal optical images indicated the secretion of cytoplasmic extension linking adjoining nuclei after 96 hours of incubation. These findings showed that eggshell based nanohydroxyapatite and poly(lactic acid) fibers could be potential scaffold for tissue regeneration.

Physicochemical evaluation and in vitro hemocompatibility study on nanoporous hydroxyapatite

Hydroxyapatite is an ideal biomaterial for bone tissue engineering due to its biocompatibility and hemocompatibility which have been widely studied by many researchers. The incorporation of nanoporosity into hydroxyapatite could transform the biomaterial into an effective adsorbent for uremic toxins removal especially in artificial kidney system. However, the effect of nanoporosity incorporation on the hemocompatibility of hydroxyapatite has yet to be answered. In this study, nanoporous hydroxyapatite was synthesized using hydrothermal technique and its hemocompatibility was determined. Non-ionic surfactants were used as soft templates to create porosity in the hydroxyapatite. The presence of pure hydroxyapatite phase in the synthesized samples is validated by X-ray diffraction analysis and Fourier transform infrared spectroscopy. The TEM images show that the hydroxyapatite formed rod-like particles with the length of 21-90 nm and diameter of 11-70 nm. The hydroxyapatite samples exhibit BET surface area of 33-45 m² g^-1 and pore volume of 0.35-0.44 cm³ g^-1. The hemocompatibility of the hydroxyapatite was determined via hemolysis test, platelet adhesion, platelet activation and blood clotting time measurement. The nanoporous hydroxyapatite shows less than 5% hemolysis, suggesting that the sample is highly hemocompatible. There is no activation and morphological change observed on the platelets adhered onto the hydroxyapatite. The blood clotting time demonstrates that the blood incubated with the hydroxyapatite did not coagulate. This study summarizes that the synthesized nanoporous hydroxyapatite is a highly hemocompatible biomaterial and could potentially be utilized in biomedical applications.