The development of novel ionic liquid-based solid catalysts and the conversion of 5-hydroxymethylfurfural from lignocellulosic biomass

Ionic liquids have attracted attention due to their excellent properties and potential for use as co-solvents, solvents, co-catalysts, catalysts, and as other chemical reagents. This mini-review focuses on the properties and structures of ionic liquids, the pretreatment of lignocellulosic biomass, and the development of novel ionic liquid-based solid catalysts for cellulose and hemicellulose derived HMF production.

Advances of Ionic Liquids and Deep Eutectic Solvents in Green Processes of Biomass-Derived 5-Hydroxymethylfurfural

5-Hydroxymethylfurfural (HMF) is identified as an important bio-based platform chemical to bridge petroleum-based and biomass-based resources. It can be obtained through dehydration of various carbohydrates as well as converted to value-added fuels and chemicals. As designer solvents, ionic liquids (ILs) and deep eutectic solvents (DESs) have been widely used in catalytic transformation of biomass derivatives to various chemicals. This Review summarizes recent progress in experimental and theoretical studies on dehydration of carbohydrates such as fructose, glucose, sucrose, cellobiose, chitosan, cellulose, inulin, and even raw biomass to generate HMF using ILs and DESs as catalysts/cocatalysts and/or solvents/cosolvents. It also gives an overview of IL and DES-involved catalytic transformation of HMF to downstream products via oxidation, reduction, esterification, decarboxylation, and so forth. Challenges and prospects of ILs and DESs are also proposed for further production of HMF and HMF derivatives from biomass in green and sustainable processes.

Intriguing role of novel ionic liquids in stochastic degradation of chitosan

Green technique for hydrolysis of chitosan was developed using novel Brønsted Acidic Ionic Liquids (BAILs) as homogenous reusable catalysts. Efficiency of BAILs in controlling stochastic and irregular breakdown of chitosan was compared with that of mineral acids. Structural elucidation of the novel BAILs was performed using H¹-NMR evaluation and supplemented using mass spectroscopy. Additionally, thermal characterization was conducted using TGA-DTA analysis, while acidity was estimated by deriving the Hammet acidity function. BAILs investigated in this work enabled consistent production of LMWCS variants, with minimum formation of residual impurities. Around 80 % reduction in molecular weight was noted as compared to original under extreme conditions employed. Further, Box-Behnken Design (BBD) was implemented to optimize effect of processing parameters for conversion of chitosan to low molecular weight congeners.

Efficient conversion of N-acetyl-D-glucosamine into nitrogen-containing compound 3-acetamido-5-acetylfuran using amino acid ionic liquid as the recyclable catalyst

Chitin is the most widely distributed oceanic biomass resources. Its monomer unit, N-acetyl-_D-glucosamine (NAG), contains precious atomic nitrogen and represents a potential feedstock for the manufacture of regenerative organic nitrogen chemicals. Herein, the conversion of NAG to the platform chemical, 3-acetamido-5-acetylfuran (3A5AF), catalyzed by amino acid ionic liquids, was investigated. The reaction, catalyzed by a very small amount of glycine chloride ionic liquid without any additives, could yield 43.22% 3A5AF in 10 min. By adding CaCl₂, a higher yield up to 52.61% was obtained. This work demonstrated the conversion of chitin biomass to 3A5AF in higher yield without using a boron-based catalyst for the first time. Moreover, the ionic liquid catalyst exhibited excellent recyclability, and afforded 43.22-36.59% yield over during eight cycles. This research provides new and green procedures to convert shellfish fishery waste into value-added platform chemicals.

Production of 5-Hydroxymethylfurfural from Chitin Biomass: A Review

Chitin biomass, a rich renewable resource, is the second most abundant natural polysaccharide after cellulose. Conversion of chitin biomass to high value-added chemicals can play a significant role in alleviating the global energy crisis and environmental pollution. In this review, the recent achievements in converting chitin biomass to high-value chemicals, such as 5-hydroxymethylfurfural (HMF), under different conditions using chitin, chitosan, glucosamine, and N-acetylglucosamine as raw materials are summarized. Related research on pretreatment technology of chitin biomass is also discussed. New approaches for transformation of chitin biomass to HMF are also proposed. This review promotes the development of industrial technologies for degradation of chitin biomass and preparation of HMF. It also provides insight into a sustainable future in terms of renewable resources.

Efficient conversion of glucosamine to levulinic acid in a sulfamic acid-catalyzed hydrothermal reaction

Glucosamine is a monomer of chitosan, which is a biopolymer derived from the exoskeletons of crustaceans. This work investigated the conversion of glucosamine into the platform chemical levulinic acid (LA), in a sulfamic acid-catalyzed hydrothermal reaction. The optimized results of LA production showed that the conditions of 200 °C, 125 g L-1 glucosamine, 0.3 M sulfamic acid, and 15 min produced a 33.76 ± 0.19 mol% LA yield. The same conditions produced only 0.14 mol% 5-HMF yield. These results show that glucosamine is a potential bioresource to produce platform chemicals. Also, in the field of biofuels and chemical synthesis processes, the catalytic system using sulfamic acid is significant.

Direct Production of Furfural in One-pot Fashion from Raw Biomass Using Brønsted Acidic Ionic Liquids

The conversion of raw biomass into C5-sugars and furfural was demonstrated with the one-pot method using Brønsted acidic ionic liquids (BAILs) without any mineral acids or metal halides. Various BAILs were synthesized and characterized using NMR, FT-IR, TGA, and CHNS microanalysis and were used as the catalyst for raw biomass conversion. The remarkably high yield (i.e. 88%) of C5 sugars from bagasse can be obtained using 1-methyl-3(3-sulfopropyl)-imidazolium hydrogen sulfate ([C₃SO₃HMIM][HSO₄]) BAIL catalyst in a water medium. Similarly, the [C₃SO₃HMIM][HSO₄] BAIL also converts the bagasse into furfural with very high yield (73%) in one-pot method using a water/toluene biphasic solvent system.