Mechanism for the seleikctive adsorption of uranium from seawater using carboxymethyl-enhanced polysaccharide-based amidoxime adsorbent

Land-based uranium resources are becoming scarce because of the widespread development and use of nuclear energy. Therefore, to make up for the shortage of uranium resources, a new chitosan/carboxymethyl-β-cyclodextrin/quaternary ammonium salt-functionalized amidoxime carbon adsorbent (CSAOCF) was designed and synthesized for extracting uranium from seawater. Experimental studies show that the adsorption of uranium by CSAOCF is a spontaneous endothermic reaction and chemical adsorption. The theoretical maximum adsorption capacity of uranium can reach 726 mg/g at 308 K and pH = 6. Moreover, the adsorption efficiency and selectivity of CSAOCF for uranium were significantly improved after the introduction of the carboxymethyl group, and the selection and partition coefficient of CSAOCF for uranium and vanadium increased from 16-fold to 30-fold under the same conditions. This indicates that there is a synergistic effect between carboxyl and amidoxime groups, which can promote the adsorption of uranium by CSAOCF. Furthermore, CSAOCF exhibits good oil resistance and can be reused more than five times. Therefore, CSAOCF containing carboxymethyl and amidoxime functional groups can considerably improve the selective adsorption of uranium and has great potential in the extraction of uranium from seawater.

Evaluation of Adsorptive Capture and Release Efficiency of MNPs-SA@Cu MOF Composite Beads Toward U(VI) and Th(IV) Ions from an Aqueous Media

Effluent from nuclear power plants, rocks, and minerals contains hazardous radionuclides that adversely affect human health and seriously threaten the environment. To address this issue, simple, economic, and sustainable magnetite nanoparticle loaded sodium alginate copper metal-organic framework composite beads (MNPs-SA@Cu MOF composite beads) have been designed, and their performance has been evaluated under varying conditions of pH, time, adsorbent dose, and initial concentration and have been studied by batch adsorption studies for optimizing the adsorption conditions. In this work, MNPs-SA@Cu MOF composite beads have been prepared in situ for the adsorptive removal of uranium [U(VI)] and thorium [Th(IV)] ions from an aqueous solution. The synthesized MNPs-SA@Cu MOF composite beads were characterized by model analytical techniques like Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, field emission scanning electron microscopy, Brunauer-Emmett-Teller, and thermal gravimetric analysis. Here, 6 mg of adsorbent with 10 mL of 50 mg/L uranium and thorium ion solution at pH 5 was capable of removing the U(VI) and Th(IV) ions with 99.9 and 97.7% removal efficiencies, respectively. The obtained results showed that the adsorption behavior of the adsorbent for U(VI) and Th(IV) follows pseudo-second-order kinetics, and Langmuir isotherm fitted well with a maximum adsorption capacity of 454.54 and 434.78 mg/g, respectively. The adsorption mechanism indicated that electrostatic interaction and hydrogen bonding are the main driving forces for removing the U(VI) and Th(IV) ions. It can be reused for up to 10 adsorption-desorption cycles with minimal loss of removal efficiency. The easy synthesis method of MNPs-SA@Cu MOF composite beads and the high removal efficiency of U(VI) and Th(IV) ions reveal that they can potentially treat radionuclide waste effectively.

Theoretical and experimental investigations of enhanced uranium(VI) adsorption by nitrogen doping strategy

With the ongoing development and utilization of nuclear energy, uranium pollution has become an increasingly serious issue. Although many adsorbents are able to remove hexavalent uranium (U(VI)) from aqueous solution,...

Sustainable Fenton-like degradation of methylene blue over MnO2-loaded poly(amidoxime-hydroxamic acid) cellulose microrods

Catalysts based on cellulose/metal oxide hybrids are considered effective for the remediation of dye wastewater. However, the difficult recovery of commonly used nanocellulose and the weak binding strength of metal oxide nanoparticles restrict their wide application. Herein, MnO₂ nanoparticle-loaded poly(amidoxime-hydroxamic acid) modified microcrystalline cellulose (pAHA-MCC@MnO₂) catalysts were synthesized via an oximation reaction followed by in-situ growth. Morphology, crystallinity and textural characteristics of pAHA-MCC before and after deposition of MnO₂ nanoparticles were characterized by SEM, EDS, FTIR, XRD and XPS analyses. The main results indicated the formation of hierarchical porous structured cellulose microrods with uniform distribution of hydrangea flower-like MnO₂ nanoparticles. In the presence of H₂O₂, pAHA-MCC@MnO₂ displayed good catalytic performance toward the degradation of methylene blue (MB) over a wide pH range of 3-10, due to the advanced Fenton-like catalysis. Reaction conditions, such as amount of H₂O₂ used, the initial MB concentration and catalyst dosage were also investigated. The optimized system showed 97.6% removal of MB in 25 min for 100 mg/L MB solution, with very little decrease in performance after 5 cycles. This work provides a facile and promising strategy for the development of biodegradable and sustainable architectures capable of efficiently degrading dye wastewater.

Surfactant-assisted adsorption of uranyl ions in aqueous solution on TiO2/polythiophene nanocomposite

In this work, hexadecyltrimethylammonium-bromide (HTAB)-modified polythiophene (PTh)/TiO₂ nanocomposite (HTAB/PTh/TiO₂) was applied to remove uranyl ions (UO₂²⁺). FT-IR, XRD, ζ potential, TGA, SEM, and XPS were utilized to obtain the chemical and physical properties of HTAB/PTh/TiO₂. The effects of HTAB content, preparation temperature, and adsorption conditions on UO₂²⁺ removal were investigated comprehensively. And the UO₂²⁺ adsorption process on HTAB/PTh/TiO₂ was fitted to the Sips model with a saturated adsorption capacity of 234.74 mg/g, which was 6 times over TiO₂. The results suggested that the surfactant of HTAB can significantly improve the adsorption ability of TiO₂ for UO₂²⁺ ions. This work provides a strategy of surfactant modification for enhancing the separation and recovery ability of adsorbent toward UO₂²⁺ in the radioactive wastewater.

Role of surface functional groups of hydrogels in metal adsorption: From performance to mechanism

Hydrogels have been studied quite intensively in recent decades regarding whether their metal adsorption abilities may be modified or even enhanced via functionalization (i.e., functionalizing the surfaces of hydrogels with specific functional groups). Studies have found that functionalizing hydrogels can in fact give them higher adsorptive power. This enhanced adsorptive performance is articulated in this paper through critically reviewing more than 120 research articles in such terms as the various techniques of synthesizing functionalized hydrogels, the roles that specific functional groups play on adsorption performance, selectivity, reusability, as well as on adsorption mechanism. Moreover, this critical review offers insight into future designs of functionalized hydrogels with specific metal adsorption capabilities.

A new route for manufacturing poly(aminophosphonic)-functionalized poly(glycidyl methacrylate)-magnetic nanocomposite - Application to uranium sorption from ore leachate

A high-energy ball milling of magnetite nanoparticles with amino-phosphonic functionalized poly(glycidyl methacrylate) polymer is used for manufacturing a highly efficient magnetic sorbent for U(VI) sorption from aqueous solutions. The Uranyl ions were adsorbed through the binding with amine and phosphonic groups as confirmed by Fourier Transform infrared (FTIR) and X-ray photoelectron spectroscopy (XPS) analyses. The maximum sorption capacity (up to 270 mg U g^-1) occurred at pH = 3-4; Langmuir isotherm well describes the sorption process. Small-size particles allow achieving fast uptake (within ≈90 min of contact); and the kinetic profiles are modeled by the pseudo-second order rate equation. Uranium is successfully desorbed from loaded sorbent using 0.25 M NaHCO₃ solution: Sorbent can be recycled with minimal decrease in sorption and desorption efficiency for at least 6 cycles. The sorbent is efficiently used for U(VI) recovery from the acidic leachates of U-bearing ores (after precipitation pre-treatment). Sorption capacity approaches 190 mg U g^-1 despite the presence of high concentrations of Fe and Si: the sorbent has a marked preference for U(VI) (confirmed by distribution ratios and selectivity coefficients).

Carboxylate-functionalized organic nanocrystals for high-capacity uranium sorbents

Carboxylate-functionalized organic nanocrystals (ONCs) derived from perylene diimide or naphthalene diimide were synthesized and carefully characterized as novel high-capacity uranium (U(VI)) sorbents. Adsorption studies using uranyl ions demonstrated that the carboxyl and hydroxyl groups on the surface of the ONCs play pivotal roles in U(VI) adsorption. ONCs formed from the condensation of perylene dianhydride and aminoisophthalic acid exhibit very high U(VI) adsorption capacities of 1393 mg g^-1 comparable to the highest capacity ever reported. The adsorption kinetics of the ONCs were found to obey the second-order model, indicating that chemisorption is the rate-determining step for U(VI) adsorption by these materials. Furthermore, the perylene-based ONC containing imidazole exhibited no pH dependency upon the U(VI) adsorption and the naphthalene-based ONC was able to remove up to 97.5% U(VI) from simulated nuclear industrial effluent containing many competing elements. These findings will facilitate the development of high-performance organic U(VI) sorbents with high densities of adsorption sites.

Polypyrrole modified Fe0-loaded graphene oxide for the enrichment of uranium(vi) from simulated seawater

A high selectivity uranium (vi) adsorbent was synthesized and used for removal of uranium (vi). The idiographic adsorption capacity is attributed to coordination and chemical reduction of uranium (vi) ions with rGO-PPy-Fe⁰.

Role of porosity and polarity of nanoporous carbon spheres in adsorption applications

Structure-properties (i.e., porosity and polarity) of carbons are judiciously considered for the specific adsorption applications.