Carbon Nanofibers-Sheathed Graphite Rod Anode and Hydrophobic Cathode for Improved Performance Industrial Wastewater-Driven Microbial Fuel Cells

Carbon nanofiber-decorated graphite rods are introduced as effective and low-cost anodes for industrial wastewater-driven microbial fuel cells. Carbon nanofiber deposition on the surface of the graphite rods could be performed by the electrospinning of polyacrylonitrile/N,N-Dimethylformamide solution using the rod as nanofiber collector, which was calcined under inert atmosphere. The experimental results indicated that at 10 min electrospinning time, the proposed graphite anode demonstrates very good performance compared to the commercial anodes. Typically, the generated power density from sugarcane industry wastewater-driven air cathode microbial fuel cells were 13 ± 0.3, 23 ± 0.7, 43 ± 1.3, and 185 ± 7.4 mW/m² using carbon paper, carbon felt, carbon cloth, and graphite rod coated by 10-min electrospinning time carbon nanofibers anodes, respectively. The distinct performance of the proposed anode came from creating 3D carbon nanofiber layer filled with the biocatalyst. Moreover, to annihilate the internal cell resistance, a membrane-less cell was assembled by utilizing a poly(vinylidene fluoride) electrospun nanofiber layer-coated cathode. This novel strategy inspired a highly hydrophobic layer on the cathode surface, preventing water leakage to avoid utilizing the membrane. However, in both anode and cathode modifications, the electrospinning time should be optimized. The best results were obtained at 5 and 10 min for the cathode and anode, respectively.

An approach to the photocatalytic mechanism in the TiO2-nanomaterials microorganism interface for the control of infectious processes

The approach of this timely review considers the current literature that is focused on the interface nanostructure/cell-wall microorganism to understand the annihilation mechanism. Morphological studies use optical and electronic microscopes to determine the physical damage on the cell-wall and the possible cell lysis that confirms the viability and microorganism death. The key parameters of the tailoring the surface of the photoactive nanostructures such as the metal functionalization with bacteriostatic properties, hydrophilicity, textural porosity, morphology and the formation of heterojunction systems, can achieve the effective eradication of the microorganisms under natural conditions, ranging from practical to applications in environment, agriculture, and so on. However, to our knowledge, a comprehensive review of the microorganism/nanomaterial interface approach has rarely been conducted. The final remarks point the ideal photocatalytic way for the effective prevention/eradication of microorganisms, considering the resistance that the microorganism could develop without the appropriate regulatory aspects for human and ecosystem safety.

Effective strategies for anode surface modification for power harvesting and industrial wastewater treatment using microbial fuel cells

This study investigates three different strategies for anode surface treatment by doping superficial nitrogen groups on the anode surfaces of carbon cloth (CC) and carbon paper (CP). The chosen anodes were hydrothermally treated in the presence of an ammonia solution (AST), a mixture of nitric acid and sulfuric acid (AHT), and solid urea (UT) at 180 °C for 3 h. The utilized characterization techniques confirmed doping of nitrogen on the anode surfaces and a decrease in the oxygen-bonded carbon content. Furthermore, the results showed that the power and current densities were significantly affected by the surface modification techniques. Interestingly, the AST strategy achieved the highest power density of 159.3 mW^-2 and 91.6 mWm^-2, which revealed an increase in power of 115% and 56.8% for CC-AST and CP-AST, respectively. Additionally, the maximum coulombic efficiencies were 63.9% and 27.5% for the CC-AST and CP-AST anodes, respectively. Overall, these results highlight the significance of anode surface modification for enhancing MFC performance to generate electricity and treat actual wastewater.