Chemical amination of immobilized enzymes for enzyme coimmobilization: Reuse of the most stable immobilized and modified enzyme

Although Lecitase and the lipase from Thermomyces lanuginosus (TLL) could be coimmobilized on octyl-agarose, the stability of Lecitase was lower than that of TLL causing the user to discard active immobilized TLL when Lecitase was inactivated. Here, we propose the chemical amination of immobilized TLL to ionically exchange Lecitase on immobilized TLL, which should be released to the medium after its inactivation by incubation at high ionic strength. Using conditions where Lecitase was only adsorbed on immobilized TLL after its amination, the combibiocatalyst was produced. Unfortunately, the release of Lecitase was not possible using just high ionic strength solutions, and if detergent was added, TLL was also released from the support. This occurred when using 0.25 M ammonium sulfate, Lecitase did not immobilize on aminated TLL. That makes the use octyl-vinylsulfone supports necessary to irreversibly immobilize TLL, and after blocking with ethylendiamine, the immobilized TLL was aminated. Lecitase immobilized and released from this biocatalyst using 0.25 M ammonium sulfate and 0.1% Triton X-100. That way, a coimmobilized TLL and Lecitase biocatalyst could be produced, and after Lecitase inactivation, it could be released and the immobilized, aminated, and fully active TLL could be utilized to build a new combibiocatalyst.

Developments of biobased plasticizers for compostable polymers in the green packaging applications: A review

The demand for biobased materials for various end-uses in the bioplastic industry is substantially growing due to increasing awareness of health and environmental concerns, along with the toxicity of synthetic plasticizers such as phthalates. This fact has stimulated new regulations requiring the replacement of synthetic conventional plasticizers, particularly for packaging applications. Biobased plasticizers have recently been considered as essential additives, which may be used during the processing of compostable polymers to enormously boost biobased packaging applications. The development and utilization of biobased plasticizers derived from epoxidized soybean oil, castor oil, cardanol, citrate, and isosorbide have been broadly investigated. The synthesis of biobased plasticizers derived from renewable feedstocks and their impact on packaging material performance have been emphasized. Moreover, the effect of biobased plasticizer concentration, interaction, and compatibility on the polymer properties has been examined. Recent developments have resulted in the replacement of synthetic plasticizers by biobased counterparts. Particularly, this has been the case for some biodegradable thermoplastics-based packaging applications.

Synthesis and properties of a bio-based PVC plasticizer derived from lactic acid

A green plasticizer ALHD is synthesized from the corn fermentation product, lactic acid, which is non-toxic and renewable.

One Pot Use of Combilipases for Full Modification of Oils and Fats: Multifunctional and Heterogeneous Substrates

Lipases are among the most utilized enzymes in biocatalysis. In many instances, the main reason for their use is their high specificity or selectivity. However, when full modification of a multifunctional and heterogeneous substrate is pursued, enzyme selectivity and specificity become a problem. This is the case of hydrolysis of oils and fats to produce free fatty acids or their alcoholysis to produce biodiesel, which can be considered cascade reactions. In these cases, to the original heterogeneity of the substrate, the presence of intermediate products, such as diglycerides or monoglycerides, can be an additional drawback. Using these heterogeneous substrates, enzyme specificity can promote that some substrates (initial substrates or intermediate products) may not be recognized as such (in the worst case scenario they may be acting as inhibitors) by the enzyme, causing yields and reaction rates to drop. To solve this situation, a mixture of lipases with different specificity, selectivity and differently affected by the reaction conditions can offer much better results than the use of a single lipase exhibiting a very high initial activity or even the best global reaction course. This mixture of lipases from different sources has been called “combilipases” and is becoming increasingly popular. They include the use of liquid lipase formulations or immobilized lipases. In some instances, the lipases have been coimmobilized. Some discussion is offered regarding the problems that this coimmobilization may give rise to, and some strategies to solve some of these problems are proposed. The use of combilipases in the future may be extended to other processes and enzymes.

Improvement of lipase activity by synergistic immobilization on polyurethane and its application for large-scale synthesizing vitamin A palmitate

We have developed an improved and effective method to immobilize lipase on hydrophobic polyurethane foam (PUF) with different modifications. PUF was treated with hydrochloric acid to increase the active sites and then the active carboxyl groups and amino groups were exposed. Enzyme activity of lipase immobilized on PUF-HCL (8000 U/g) was 50% higher than that of lipase immobilized on PUF (5300 U/g). There is an increase in the activity of the immobilized lipase on AA/PEI-modified support (115,000 U/g), a 2.17-fold increase compared to lipase immobilized on the native support was observed. The activity of immobilized lipases was dependent on the PEI molecular weight, with best results from enzyme immobilized on PUF-HCL-AA/PEI (MW 70,000 Da, 12,800 U/g)), which was 2.41 times higher compared to that of the same enzyme immobilized on PUF. These results suggest that the activity of immobilized lipase is influenced by the support surface properties, and a moderate support surface micro-environment is crucial for improving enzyme activity. Finally, the immobilized lipase was used for the production of vitamin A palmitate. The immobilized lipase can be reused for up to 18 times with a conversion rate above 90% for 12 h in a 3 L bioreactor. Research highlights An efficient immobilization protocol on polyurethane foam was developed Polyethyleneimine and acetic acid were used to regulate the micro-environment concurrently The activity of lipase immobilized on PUF-HCL-AA/PEI was improved by 2.41 times Immobilized lipase exhibited excellent operational stability for vitamin A palmitate synthesis.

Novozym 435: the “perfect” lipase immobilized biocatalyst?

Novozym 435 (N435) is a commercially available immobilized lipase produced by Novozymes with its advantages and drawbacks.

Lipase immobilization on high water adsorbing capacity bagasse: applications in bio-based plasticizer synthesis

This study investigates the structure and water adsorbing capacity of bagasse and of sodium hydroxide pretreated bagasse. The structures of bagasse and bagasse-NaOH were compared by SEM and XRD. Candida antarctica lipase B was then immobilized on bagasse, bagasse-NaOH and DPA@bagasse-NaOH. The expressed activity and immobilization yield of lipase immobilized on bagasse-NaOH (1.0%) was 36% and 45% higher than that on bagasse. When dopamine (DPA) was used as cationic polymer monomer via self-polymerization for mediating immobilization, the protein loading amounts and activity of lipase immobilized on DPA@bagasse-NaOH were higher than that of bagasse-NaOH. When the DPA concentration was 100 mg/ml, the immobilized lipase expressed activity reached its highest value (800 U/g), where the immobilization yield achieved 96.8%, which was 3.93-fold of lipase immobilized on native bagasse (24.6%). Then the immobilized lipases were used to synthesize a bio-based plasticizer. Lipase immobilized on DPA@bagasse-NaOH exhibited a significantly improved operational stability. Even after 12 batches, a high ester yield (84.2%) was maintained. Additionally, poly (vinyl chloride) PVC blends plasticized with methyl oleate as a secondary plasticizer were investigated. It was discovered that methyl oleate can be used as an effective bio-based plasticizer for PVC. These results indicate that bagasse with high water adsorbing capacity and self-polymerized DPA layer could create a favorable microenvironment for bio-based plasticizer synthesis in esterification reactions.

Plasticization and thermal behavior of hydroxyl and nitrogen rich group-containing tung-oil-based ester plasticizers for PVC

Multifunctional tung-oil-based ester plasticizers were successfully synthesized. These plasticizers exhibit superior plasticization and thermal stability for PVC.