Reduced Ice Adhesion Using Amphiphilic Poly(Ionic Liquid)-Based Surfaces

Ice build-up on solid surfaces causes significant economic losses for a range of industries. One solution to this problem is the development of coatings with low ice adhesion strength. Amphiphilic poly(ionic liquid) (PIL)-based surfaces have been recently reported for antifogging/antifrosting applications. However, they have possible anti-icing properties through lowering the ice adhesion strength that have yet to be reported. Herein, we designed well-defined triblock copolymers composed of a polydimethylsiloxane component coupled with PIL segments of poly([2 (methacryloyloxy)ethyl] trimethylammonium chloride) (PMETAC), which were subsequently UV-cured with an oligo(ethylene glycol) dimethacrylate (OEGDMA) cross-linker. The structure-property relationships of the resultant semi-interpenetrating polymer networks (SIPNs) were investigated by varying the counterion (i.e., trimethylammonium bis(trifluoromethanesulfonyl)imide (TFSI^-)) and the content of the PIL segments and cross-linker. An ice adhesion strength as low as 13.3 ± 8.6 kPa was observed for the coating containing 12.5 wt % of PMETAC segment and 5 wt % of OEGDMA, which is one of the lowest values reported so far for the amphiphilic coatings. Characterization of the coatings in terms of surface features, wettability, and hydration states have enabled the elucidation of different deicing mechanisms. Self-lubrication due to the existence of nonfreezable bound water led to the obtained low ice adhesion strength. This work offers a new approach for the exploration of PIL-based icephobic coatings for practical applications.

Enhanced Surface Icephobicity on an Elastic Substrate

Ice accumulation on exposed surfaces is unavoidable as time elapses and the temperature decreases sufficiently. To mitigate icing problems, various types of icephobic substrates have been rationally designed, including superhydrophobic substrates (SHSs), aqueous lubricating layers, organic lubricating layers, organogels, polyelectrolyte brush layers, electrolyte-based hydrogels, elastic substrates, and multicrack initiator-promoted surfaces. Among these surfaces, elastic substrates show excellent enhanced surface icephobicity during dynamic processes (i.e., water-impacting and de-icing tests). Herein, we summarize recent progress in elastic icephobic substrates and discuss the reasons that surface icephobicity can be enhanced on elastic substrates in terms of enhanced water repellency and further lowering the ice adhesion strength. For enhanced water repellency, we focus on reducing the contact time of water impacting such that water droplets can be easily shed from an elastic substrate before ice occurs. Reducing the contact time of water impacting various substrates (i.e., micro/nanostructured rigid SHSs, macrotextured rigid SHSs, and elastic SHSs) is discussed, followed by exploring their mechanisms. We argue that the ice adhesion strength can be further lowered on an elastic substrate by rationally tuning the elastic modulus and surface textures (i.e., surface textured and hollow subsurface textured) and combining elastic substrate with other passive anti-icing strategies (or functioning passive icephobic substrates with an electrothermal or photothermal stimulus). In short, the introduction of an elastic substrate into a passive or active icephobicity surface opens an avenue toward designing a versatile icephobic surface, providing great potential for outdoor anti-icing applications.

Design of Icephobic Surfaces by Lowering Ice Adhesion Strength: A Mini Review

Ice accretion can lead to severe consequences in daily life and sometimes catastrophic events. To mitigate the hazard of icing, passive icephobic surfaces have drawn widespread attentions because of their abilities in repelling incoming water droplets, suppressing ice nucleation and/or lowering ice adhesion strength. As time elapses and temperature lowers sufficiently, ice accretion becomes inevitable, and a realistic roadmap to surface icephobicity for various outdoor anti-icing applications is to live with ice but with the lowest ice adhesion strength. In this review, surfaces with icephobicity are critically categorized into smooth surfaces, textured surfaces, slippery surfaces and sub-surface textured surfaces, and discussed in terms of theoretical limit, current status and perspectives. Particular attention is paid to multiple passive anti-icing strategies combined approaches as proposed on the basis of icephobic surfaces. Correlating the current strategies with one another will promote understanding of the key parameters in lowering ice adhesion strength. Finally, we provide remarks on the rational design of state-of-the-art icephobic surfaces with low ice adhesion strength.

Dynamic Anti-Icing Surfaces (DAIS)

Remarkable progress has been made in surface icephobicity in the recent years. The mainstream standpoint of the reported antiicing surfaces yet only considers the ice-substrate interface and its adjacent regions being of static nature. In reality, the local structures and the overall properties of ice-substrate interfaces evolve with time, temperature and various external stimuli. Understanding the dynamic properties of the icing interface is crucial for shedding new light on the design of new anti-icing surfaces to meet challenges of harsh conditions including extremely low temperature and/or long working time. This article surveys the state-of-the-art anti-icing surfaces and dissects their dynamic changes of the chemical/physical states at icing interface. According to the focused critical ice-substrate contacting locations, namely the most important ice-substrate interface and the adjacent regions in the substrate and in the ice, the available anti-icing surfaces are for the first time re-assessed by taking the dynamic evolution into account. Subsequently, the recent works in the preparation of dynamic anti-icing surfaces (DAIS) that consider time-evolving properties, with their potentials in practical applications, and the challenges confronted are summarized and discussed, aiming for providing a thorough review of the promising concept of DAIS for guiding the future icephobic materials designs.

Design and applications of surfaces that control the accretion of matter

Surfaces that provide control over liquid, solid, or vapor accretion provide an evolutionary advantage to numerous plants, insects, and animals. Synthetic surfaces inspired by these natural surfaces can have a substantial impact on diverse commercial applications. Engineered liquid and solid repellent surfaces are often designed to impart control over a single state of matter, phase, or fouling length scale. However, surfaces used in diverse real-world applications need to effectively control the accrual of matter across multiple phases and fouling length scales. We discuss the surface design strategies aimed at controlling the accretion of different states of matter, particularly those that work across multiple length scales and different foulants. We also highlight notable applications, as well as challenges associated with these designer surfaces' scale-up and commercialization.

Adhesion behaviors on four special wettable surfaces: natural sources, mechanisms, fabrications and applications

The study of adhesion behaviors on solid-liquid surfaces plays an important role in scientific research and development in various fields, such as medicine, biology and agriculture. The contact angle and sliding angle of the liquid on the solid surface are commonly used to characterize and measure the wettability of a particular surface. They have a wide range of values, which results in different wettability. It boils down to the adhesion of solid surfaces to liquids. This feature article is aimed at revealing the essence of the adhesion behavior from the aspects of controlling the chemical composition or changing the geometrical microstructure of the surface, and reviewing the natural sources, wetting models, preparation methods and applications of four kinds of typical solid-liquid surfaces (low-adhesion superhydrophobic surfaces, high-adhesion superhydrophobic surfaces, slippery liquid-infused porous surfaces (SLIPS) and hydrophilic/superhydrophilic surfaces). Last, a summary and outlook on this field are given to point out the current challenges and the potential research directions of surface adhesion in the coming future.

Multivalent Surface Cations Enhance Heterogeneous Freezing of Water on Muscovite Mica

Heterogeneous ice nucleation is a crucial phenomenon in various fields of fundamental and applied science. We investigate the effect of surface cations on freezing of water on muscovite mica. Mica is unique in that the exposed ion on its surface can be readily and easily exchanged without affecting other properties such as surface roughness. We investigate freezing on natural (K⁺) mica and mica in which we have exchanged K⁺ for Al³⁺, Mg²⁺, Ca²⁺, and Sr²⁺. We find that liquid water freezes at higher temperatures when ions of higher valency are present on the surface, thus exposing more of the underlying silica layer. Our data also show that the size of the ion affects the characteristic freezing temperature. Using molecular dynamics simulations, we investigate the effects that the ion valency and exposed silica layer have on the behavior of water on the surface. The results indicate that multivalent cations enhance the probability of forming large clusters of hydrogen bonded water molecules that are anchored by the hydration shells of the cations. These clusters also have a large fraction of free water that can reorient to take ice-like configurations, which are promoted by the regions on mica devoid of the ions. Thus, these clusters could serve as seedbeds for ice nuclei. The combined experimental and simulation studies shed new light on the influence of surface ions on heterogeneous ice nucleation.

Self-Deicing Electrolyte Hydrogel Surfaces with Pa-level Ice Adhesion and Durable Antifreezing/Antifrost Performance

Despite the remarkable advances in mitigating ice formation and accretion, however, no engineered anti-icing surfaces today can durably prevent frost formation, droplet freezing, and ice accretion in an economical and ecofriendly way. Herein, sustainable and low-cost electrolyte hydrogel (EH) surfaces are developed by infusing salted water into a hydrogel matrix for avoiding icing. The EH surfaces can both prevent ice/frost formation for an extremely long time and reduce ice adhesion strength to ultralow value (Pa-level) at a tunable temperature window down to -48.4 °C. Furthermore, ice can self-remove from the tilted EH surface within 10 s at -10 °C by self-gravity. As demonstrated by both molecular dynamic simulations and experiments, these extreme performances are attributed to the diffusion of ions to the interface between EH and ice. The sustainable anti-icing properties of EH can be maintained by replenishing in real-time with available ion sources, indicating the promising applications in offshore platforms and ships.

Ionic effects on synthetic polymers: from solutions to brushes and gels

The ionic effects on synthetic polymers have attracted extensive attention due to the crucial role of ions in the determination of the properties of synthetic polymers. This review places the focus on specific ion effects, multivalent ion effects, and ionic hydrophilicity/hydrophobicity effects in synthetic polymer systems from solutions to brushes and gels. The specific ion effects on neutral polymers are determined by both the direct and indirect specific ion-polymer interactions, whereas the ion specificities of charged polymers are mainly dominated by the specific ion-pairing interactions. The ionic cross-linking effect exerted by the multivalent ions is widely used to tune the properties of polyelectrolytes, while the reentrant behavior of polyelectrolytes in the presence of multivalent ions still remains poorly understood. The ionic hydrophilicity/hydrophobicity effects not only can be applied to make strong polyelectrolytes thermosensitive, but also can be used to prepare polymeric nano-objects and to control the wettability of polyelectrolyte brush-modified surfaces. The not well-studied ionic hydrogen bond effects are also discussed in the last section of this review.

Inhibiting Condensation Freezing on Patterned Polyelectrolyte Coatings

Condensation freezing inhibition is of great practical importance for anti-icing applications; however, no coatings with this performance have been reported. Here, we report the inhibition of condensation freezing on patterned polyelectrolyte coatings, including polyelectrolyte brush (PB), polyelectrolyte multilayer (PEM), and polyelectrolyte hydrogel (PH) surfaces, benefiting from their feature in regulating ice nucleation and propagation via changing counterions. On the reported surfaces, ice nucleation can be initiated exclusively at the domains with the polyelectrolytes; moreover, spontaneous ice propagation can be achieved atop the patterned polyelectrolyte surface. Consequently, condensed water surrounding the frozen drops on the patterned polyelectrolyte surface evaporates due to the instantaneously released latent heat in the course of ice propagation. Afterward, ice grows specifically on polyelectrolyte surfaces via desublimation as the saturated vapor pressure of ice is smaller than that of condensed water drops. As such, an ice-free region up to 96% of the entire surface area can be accomplished. We demonstrate that various polyelectrolyte coatings can be easily introduced on almost all surfaces, revealing great promise for anti-icing applications.

A New Measuring System for the Determination of the Ice Adhesion Strength on Smooth Surfaces

To gain knowledge about cause-effect relationships for the adhesion of ice on surfaces with different chemical groups, we wanted to study the effect of thin polymer layers on the ice adhesion strength. To minimize the effect of roughness, smooth substrates that have generally relatively low ice adhesion strengths were chosen. To be able to obtain highly reproducible values for the region of low ice adhesion and to measure small differences of ice adhesion at surfaces with different chemical compositions, a new measuring system for the determination of the ice adhesion strength which is based on a modified spin-coater was developed. We show its technical potential on the basis of first results on pure silicon wafers and selected hydrophilic polymer layers. Furthermore, we investigated the effect of the water quality on the ice adhesion strength. The obtained data are discussed in the context of physicochemical properties of the layers and of the chemical characteristics of the used polymers.

Understanding the role of hollow sub-surface structures in reducing ice adhesion strength

The accretion of ice on exposed surfaces results in detrimental effects in many aspects of life and technology. Passive icephobic coatings, designed by strategies towards lowering ice adhesion to mitigate icing problems, have recently received great attention. In our previous studies, incorporation of hollow sub-surface structures which act as macro-scale crack initiators has been shown to drastically lower the ice adhesion on PDMS surfaces. In this study, the effects of hollow sub-surface structure geometry, such as the heights, shapes, and distributions, as well as the directions of the applied shear force, are experimentally investigated. Our results show that the number of potential macro-scale crack initiation sites dictates ice adhesion strength. The directions of the applied shear force also influence the ice adhesion strength when the potential crack length is dependent on the applied shear force direction. The inter-locking effect between ice and the coating, caused by the pre-deformation, needs to be considered if one of the dimensions of the hollow sub-surface structures approaches the millimeter scale. These results improve the understanding of the role of hollow sub-surface structures in reducing ice adhesion, providing new insights into the design principles for multi-scale crack initiator-promoted icephobic surfaces.

Tuning the Properties of Charged Polymers at the Solid/Liquid Interface with Ions

In conventional theories, where ions are treated as point charges, the properties of charged polymers can be tuned using ions via the ionic strength. However, this article will show that the properties of charged polymers at the solid/liquid interface, including charged polymer brushes and polyelectrolyte multilayers, can be tuned by ions beyond ionic strength effects. Ion specificity, multivalency, ionic hydrogen bonding, and ionic hydrophobicity/hydrophilicity are used to tune a range of properties of charged polymers at the solid/liquid interface such as hydration, conformation, stiffness, surface wettability, lubricity, adhesion, and protein adsorption. The ionic effects demonstrated here greatly broaden our understanding of the use of ions to tune the interfacial properties of charged polymers. It is anticipated that these ionic effects can be further expanded by incorporating new types of important ion-charged polymer interactions and can also be extended to neutral polymer systems.

Superhydrophilic Anti-Icing Coatings Based on Polyzwitterion Brushes

In this work, an anti-icing coating based on superhydrophilic polyzwitterion brushes is reported. Poly(sulfobetaine methacrylate) (PSBMA) brushes were synthesized by surface-initiated atom-transferred radical polymerization to create superhydrophilic films on silicon wafers. The thickness of the PSBMA brushes film increased linearly with the polymerization time, and the film remained superhydrophilic in a nonassociated state when the thickness was less than ∼100 nm. DSC and FTIR analyses revealed that PSBMA contains more nonfreezable bound water than typical polyelectrolytes such as poly(sodium styrenesulfonate) and poly(2-(methacryloyloxy)ethyltrimethylammonium chloride), leading to lower ice adhesion strength than the latter two. At -20 °C, the PSBMA brushes coating demonstrated low ice adhesion strength of 60 kPa, showing a significant reduction in ice adhesion by up to ∼75% compared to uncoated silicon wafer. The optimum PSBMA layer thickness for low ice adhesion was ∼100 nm. These findings suggest that polyzwitterions are excellent candidates for anti-icing coating application.

Metal-catechol complexes mediate ice nucleation

The capability of mediating ice nucleation is pertinent to a broad range of fields. Herein, inspired by metal-catechol coordination found in adhesive proteins in which catechol moieties can construct strong complexes with a diverse array of metal ions, we develop a platform for mediating ice nucleation based on metal-catechol complexes and demonstrate that ice nucleation can be successively mediated by varying the characteristics and valence of the metal in metal-catechol complexes.

Icephobic Strategies and Materials with Superwettability: Design Principles and Mechanism

Ice formation and accretion on surfaces is a serious economic issue in energy supply and transportation. Recent strategies for developing icephobic surfaces are intimately associated with superwettability. Commonly, the superwettability of icephobic materials depends on their surface roughness and chemical composition. This article critically categorizes the possible strategies to mitigate icing problems from daily life. The wettability and classical nucleation theories are used to characterize the icephobic surfaces. Thermodynamically, the advantages/disadvantages of superhydrophobic surfaces are discussed to explain icephobic behavior. The importance of elasticity, slippery liquid-infused porous surfaces (SLIPSs), amphiphilicity, antifreezing protein, organogels, and stimuli-responsive materials has been highlighted to induce icephobic performance. In addition, the design principles and mechanism to fabricate icephobic surfaces with superwettability are explored and summarized.

Tuning Ice Nucleation and Propagation with Counterions on Multilayer Hydrogels

Ice formation on solid surfaces includes heterogeneous ice nucleation and ice propagation processes. However, no study has been focused on tuning of both ice nucleation and ice propagation via a simple anti-icing coating method. In this work, we have prepared multilayer hydrogels based on simple layer-by-layer (LBL) deposition approach and discover the ion-specific effect on both ice nucleation and ice propagation. A large ice nucleation temperature window of 11 °C is controlled via changing different counterions; meanwhile, the differences in ice propagation time can be tuned up to 4 orders of magnitude. Through synergistically controlling of ice nucleation and propagation delay times, we can tune the freezing delay time of water droplets on multilayer hydrogel surfaces up to 3 orders of magnitude via changing various counterions. Considering the application requirements, these multilayer hydrogels are stable under different conditions and can be coated on various materials without destroying the existing surface. This new insight can inspire the design of anti-icing surfaces based on regulating both ice nucleation and ice propagation.