An ultrasensitive label-free colorimetric biosensor for the detection of glucose based on glucose oxidase-like activity of nanolayered manganese-calcium oxide

During the last years, enzyme-based biosensors have gained much more attention among the researchers and have had great success in the determination of different biological macromolecules. Nanomaterials with intrinsic enzyme-mimic activity are widely used in biomedicine as artificial enzymes. Here, we report glucose oxidase-mimic activity of nanolayered manganese-calcium (Mn-Ca) oxide nanoparticles (NL-MnCaO₂). In this work, NL-MnCaO₂nanoparticles were synthesized and characterized using different techniques including transmission electron microscopy (TEM), scanning electron microscopy (SEM), fourier-transform infrared spectroscopy (FTIR) and powder X-ray diffraction (XRD). Also, the ability of these compounds for the glucose and hydrogen peroxide (H₂O₂) determination was investigated. A non-enzymatic strategy for the colorimetric detection of glucose and H₂O₂ was reported which can be utilized not only for the rapid detection and analysis of glucose by the naked eye but also the quantitative assay of glucose by spectrophotometry. The in situ generated H₂O₂ and gluconic acid (GA) from the oxidation of glucose through the glucose oxidase-mimicking activity of NL-MnCaO₂ was detected using a colorimetric method. Also, the results confirmed the application of these compounds for the detection of glucose in human serum samples with a detection limit (LOD) of 6.12 × 10^-6 M. The results showed that NL-MnCaO₂ can be used as an alternative for the natural enzymes and act as a simple, sensitive and enzyme-free biosensor for the detection of glucose in real samples. The proposed strategy shows some advantages including sensitivity, short detection time and low detection limit.

Electrodeposition of nickel nanostructures using silica nanochannels as confinement for low-fouling enzyme-free glucose detection

This work reports an enzyme-free glucose sensor based on nickel nanostructures electrodeposited on a fluorine-doped tin oxide (FTO) electrode modified with a silica nanochannel membrane (SNM).

Electrochemical Deposition of Nanomaterials for Electrochemical Sensing

The most commonly used methods to electrodeposit nanomaterials on conductive supports or to obtain electrosynthesis nanomaterials are described. Au, layered double hydroxides (LDHs), metal oxides, and polymers are the classes of compounds taken into account. The electrochemical approach for the synthesis allows one to obtain nanostructures with well-defined morphologies, even without the use of a template, and of variable sizes simply by controlling the experimental synthesis conditions. In fact, parameters such as current density, applied potential (constant, pulsed or ramp) and duration of the synthesis play a key role in determining the shape and size of the resulting nanostructures. This review aims to describe the most recent applications in the field of electrochemical sensors of the considered nanomaterials and special attention is devoted to the analytical figures of merit of the devices.

Development of Highly Active Bifunctional Electrocatalyst Using Co3O4 on Carbon Nanotubes for Oxygen Reduction and Oxygen Evolution

Replacement of precious platinum catalyst with efficient and cheap bifunctional alternatives would be significantly beneficial for electrocatalytic oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) and the application of these catalysts in fuel cells is highly crucial. Despite numerous studies on electrocatalysts, the development of bifunctional electrocatalysts with comparatively better activity and low cost remains a big challenge. In this paper, we report a nanomaterial consisting of nanocactus-shaped Co3O4 grown on carbon nanotubes (Co3O4/CNTs) and employed as a bifunctional electrocatalyst for the simultaneous catalysis on ORR, and OER. The Co3O4/CNTs exhibit superior catalytic activity toward ORR and OER with the smallest potential difference (0.72 V) between the [Formula: see text] (1.55 V) for OER and E1/2 (0.83 V) for ORR. Thus, Co3O4/CNTs are promising high-performance and cost-effective bifunctional catalysts for ORR and OER because of their overall superior catalytic activity and stability compared with 20 wt% Pt/C and RuO2, respectively. The superior catalytic activity arises from the unique nanocactus-like structure of Co3O4 and the synergetic effects of Co3O4 and CNTs.

Ni-MOF nanosheet arrays: efficient non-noble-metal electrocatalysts for non-enzymatic monosaccharide sensing

A Ni-based metal–organic framework nanosheet array as an ordered 3D material shows high electrocatalytic activity toward glucose oxidation in alkaline medium.

Highly Efficient Dual Active Palladium Nanonetwork Electrocatalyst for Ethanol Oxidation and Hydrogen Evolution

Tunable palladium nanonetwork (PdNN) has been developed for catalyzing ethanol oxidation reaction (EOR) and hydrogen evolution reaction (HER) in alkaline electrolyte. 3D PdNN is regarded as a dual active electrocatalyst for both EOR and HER for energy conversion application. The PdNN has been synthesized by the simple chemical route with the assistance of zinc precursor and a surfactant (i.e., cetyltrimethylammonium bromide, CTAB). The thickness of the network can be tuned by simply adjusting the concentration of CTAB. Both EOR and HER have been performed in an alkaline electrolyte, and characterized by different voltammetric methods. The 3D PdNN has shown 2.2-fold higher electrochemical surface area than the commercially available Pt/C including other tested catalysts with minimal Pd loading. As a result, it provides a higher density of EOR and HER active sites and facilitated the electron transport. For example, it shows 2.6-fold higher mass activity with significantly lower CO₂ production for EOR and the similar overpotential (110 mV @ 10 mA cm^-2) for HER compared to Pt/C with better reaction kinetics for both reactions. Thus, the PdNN is proved as an efficient electrocatalyst with better electrocatalytic activity and stability than state-of-the-art Pt/C for both EOR and HER because of the crystalline, monodispersed, and support-free porous nanonetwork.

New Approach for Porous Chitosan-Graphene Matrix Preparation through Enhanced Amidation for Synergic Detection of Dopamine and Uric Acid

Amide-functionalized materials have emerged as promising nonprecious catalysts for electrochemical sensing and catalysis. The covalent immobilization of chitosan (CS) onto graphene sheet (GS) (denoted as CS-GS) has been done via higher degree of amidation reaction to develop an electrochemical sensing matrix for simultaneous determination of dopamine (DA) and uric acid (UA). The enhanced amidation between CS and GS has not been reported previously. However, electrochemical results have revealed that the CS-GS enhances the electrocatalytic performance in terms of the oxidation potential and peak current due to the higher degree of amide functionalization compared to that of CS/GS, which has a lower amidation. Differential pulse voltammetry-based studies have indicated that the CS-GS matrix works at a lower detection limit (0.14 and 0.17 μM) (S/N = 3) and over a longer linear range (1-700 and 1-800 μM), with a comparatively higher sensitivity (2.5 and 2.0 μA μM^-1 cm^-2), for DA and UA, respectively. In addition, the CS-GS matrix demonstrates good selectivity toward the detection of DA and UA in the presence of a 10-fold higher concentration of AA and glucose. The as-prepared three-dimensional porous CS-GS also endows selective determination toward DA and UA in various real samples.