Recent Advancements and Future Prospects in NBD-Based Fluorescent Chemosensors: Design Strategy, Sensing Mechanism, and Biological Applications

In recent years, the field of Supramolecular Chemistry has witnessed tremendous progress owing to the development of versatile optical sensors for the detection of harmful biological analytes. Nitrobenzoxadiazole (NBD) is one such scaffold that has been exploited as fluorescent probes for selective recognition of harmful analytes and their optical imaging in various cell lines including HeLa, PC3, A549, SMMC-7721, MDA-MB-231, HepG2, MFC-7, etc. The NBD-derived molecular probes are majorly synthesized from the chloro derivative of NBD via nucleophilic aromatic substitution. This general NBD moiety ligation method to nucleophiles has been leveraged to develop various derivatives for sensing analytes. NBD-derived probes are extensively used as optical sensors because of remarkable properties like excellent stability, large Stoke's shift, high efficiency and stability, visible excitation, easy use, low cost, and high quantum yield. This article reviewed NBD-based probes for the years 2017-2023 according to the sensing of analyte(s), including cations, anions, thiols, and small molecules like hydrogen sulfide. The sensing mechanism, designing of the probe, plausible binding mechanism, and biological application of chemosensors are summarized. The real-time application of optical sensors has been discussed by various methods, such as paper strips, molecular logic gates, smartphone detection, development of test kits, etc. This article will update the researchers with the in vivo and in vitro biological applicability of NBD-based molecular probes and challenges the research fraternity to design, propose, and develop better chemosensors in the future possessing commercial utility.

Selective and Sensitive Detection of Hg2+ and Ag+ by a Fluorescent and Colorimetric Probe with Large Stokes Shift

Development of fluorescent sensors with large Stokes shift for selective detection of heavy metals is of great importance. A novel fluorescent probe with extremely large Stokes shift (212 nm) was synthesized for selective and simultaneous detection of Hg2+ and Ag+ ions. The deep yellow probe turned colorless or pale yellow after addition of Hg2+ or Ag+. The new probe could be utilized for absorption spectral detection of Hg2+ and Ag+ both in ethanol and aqueous solution. Addition of Hg2+ and Ag+ ions caused significant decrease in the fluorescence intensity of the new probe and the selective recognition of Hg2+ and Ag+ was not interfered by common competitive metal ions including Li+, Na+, K+, Cu2+, Fe2+, Zn2+, Co2+, Ni2+, Mn2+, Sr2+, Ca2+, Mg2+, Al3+, Cr3+ and Fe3+. The detection limit for Hg2+ and Ag+ was calculated to be 4.68 μM and 4.29 μM, respectively. Application of the new probe for quantitative determination of Hg2+ and Ag+ concentrations in real water samples was accomplished.

Fluorescent RET-Based Chemosensor Bearing 1,8-Naphthalimide and Styrylpyridine Chromophores for Ratiometric Detection of Hg2+ and Its Bio-Application

Dyad compound NI-SP bearing 1,8-naphthalimide (NI) and styrylpyridine (SP) photoactive units, in which the N-phenylazadithia-15-crown-5 ether receptor is linked with the energy donor naphthalimide chromophore, has been evaluated as a ratiometric fluorescent chemosensor for mercury (II) ions in living cells. In an aqueous solution, NI-SP selectively responds to the presence of Hg²⁺ via the enhancement in the emission intensity of NI due to the inhibition of the photoinduced electron transfer from the receptor to the NI fragment. At the same time, the long wavelength fluorescence band of SP, arising as a result of resonance energy transfer from the excited NI unit, appears to be virtually unchanged upon Hg²⁺ binding. This allows self-calibration of the optical response. The observed spectral behavior is consistent with the formation of the (NI-SP)·Hg²⁺ complex (dissociation constant 0.13 ± 0.04 µM). Bio-imaging studies showed that the ratio of fluorescence intensity in the 440–510 nm spectral region to that in the 590–650 nm region increases from 1.1 to 2.8 when cells are exposed to an increasing concentration of mercury (II) ions, thus enabling the detection of intracellular Hg²⁺ ions and their quantitative analysis in the 0.04–1.65 μM concentration range.

Rhodanine-based fluorometric sequential monitoring of silver (I) and iodide ions: Experiment, DFT calculation and multifarious applications

A simple rhodanine derived fluorophoric unit has been designed for selective detection of Ag⁺ and I^- ions in DMSO-H₂O medium. The sensor R1 showed an obvious "turn-on" fluorescence response toward Ag⁺ due to the inhibition of both C-N single bond free rotation, internal charge transfer (ICT) and the formation of chelation enhanced fluorescence (CHEF) effects. The fluorescence quantum yield (Φ) was increased from 0.0013 to 0.032 for receptor R1 upon the Ag⁺-complexation. In addition, the 1:1 complexing stoichiometry was employed based on Job's plot analysis with detection limit of 24.23 × 10^-7 M. Conversely, receptor R1+Ag⁺ particularly detects I^- ion over other co-existing anions by the "turn-off" fluorescence response due to the formation of AgI, displacing the receptor R1 with the quantum yield of 0.0014. The detection limit was calculated to be 22.83 × 10^-7 M. The sensing behaviour of receptor R1 toward Ag⁺ was also supported by density functional theory (DFT) calculations. Moreover, the sensing ability of reported receptor R1 could be exercised in multifarious applications like paper strip, silica-supported analysis, staining test for latent finger print, logical behaviour, smartphone-assisted quantitative detection and real water samples studies.

A naphthyl thiourea-based effective chemosensor for fluorescence detection of Ag+ and Zn2

A naphthyl thiourea-based effective chemosensor HNC, (E)-2-(2-hydroxy-3-methoxybenzylidene)-N-(naphthalen-1-yl)hydrazine-1-carbothioamide, was synthesized. HNC showed quick responses toward Ag⁺ and Zn²⁺ through marked fluorescence turn-on in different solvent conditions, respectively. Binding proportions of HNC to Ag⁺ and Zn²⁺ were found to be 2:1 and 1:1, respectively. Detection limits of HNC for Ag⁺ and Zn²⁺ were calculated as 3.82 and 0.21 μM. Binding processes of HNC for Ag⁺ and Zn²⁺ were represented using Job's plot, DFT, ¹ H NMR titration, and ESI-MS.

Bis-BODIPY linked-triazole based on catechol core for selective dual detection of Ag+ and Hg2

Herein, we introduced a new chemosensor, bis-BODIPY linked-triazole based on catechol (BODIPY-OO) prepared by bridging two units of BODIPY fluorophore/triazole binding group with a catechol unit. A solution of this compound displayed 4- and 2-fold enhancements in fluorescence intensity after adding a mole equivalent amount of Ag⁺ and Hg²⁺ ions in methanol media, respectively. ¹H NMR titrations of BODIPY-OO with Ag⁺ and Hg²⁺ suggested that the triazole was involved in the recognition process. BODIPY-OO showed high sensitivity toward Ag⁺ and Hg²⁺ over other metal ions with detection limits of 0.45 μM and 1 μM, respectively. It can also distinguish Hg²⁺ from Ag⁺ by addition of an EDTA. This compound can therefore be employed as practical fluorescent probe for monitoring the presence of Ag⁺ and Hg²⁺ ions.

BODIPY–triazole–catechol combination serves as a “turn-on” fluorescent probe for dual detection and differentiation of Hg²⁺ and Ag⁺ ions.

Ratiometric Detection of Mercury (II) Ions in Living Cells Using Fluorescent Probe Based on Bis(styryl) Dye and Azadithia-15-Crown-5 Ether Receptor

Bis(styryl) dye 1 bearing N-phenylazadithia-15-crown-5 ether receptor has been evaluated as a ratiometric fluorescent chemosensor for mercury (II) ions in living cells. In aqueous solution, probe 1 selectively responds to the presence of Hg²⁺ via the changes in the emission intensity as well as in the emission band shape, which is a result of formation of the complex with 1:1 metal to ligand ratio (dissociation constant 0.56 ± 0.15 µM). The sensing mechanism is based on the interplay between the RET (resonance energy transfer) and ICT (intramolecular charge transfer) interactions occurring upon the UV/Vis (380 or 405 nm) photoexcitation of both styryl chromophores in probe 1. Bio-imaging studies revealed that the yellow (500-600 nm) to red (600-730 nm) fluorescence intensity ratio decreased from 4.4 ± 0.2 to 1.43 ± 0.10 when cells were exposed to increasing concentration of mercury (II) ions enabling ratiometric quantification of intracellular Hg²⁺ concentration in the 37 nM-1 μM range.

Zn2+ detection of a benzimidazole 8-aminoquinoline fluorescent sensor by inhibited tautomerization

The sensor shows a high selectivity and sensitivity toward zinc cations, accompanied by a distinct green fluorescence emission.

New colorimetric and fluorometric chemosensor for selective Hg2+ sensing in a near-perfect aqueous solution and bio-imaging

We report a new 7-nitrobenzo-2-oxa-1, 3-diazolyl (NBD)-based chemosensor containing a piperazine derivative, NBDP, for detection of mercury ions in almost 100% aqueous medium. The chemosensor shows sensing exclusively toward Hg²⁺ with a switch-on fluorescence response at 543 nm, which could be attributed to the blocking of PET (photo-induced electron transfer) process upon complexation with mercury ions. The molar ratio of Hg(Ⅱ) to NBDP in the complex is 1:1 based on the Job's plot and HRMS studies. Optimized configurations of NBDP and NBDP-Hg²⁺ complexes were simulated by means of DFT calculations. The reversible fluorescence response with low detection limit (19.2 nM) in the pH range of 6.0-7.5 renders NBDP a promising candidate for Hg²⁺ detection in neutral aqueous environments. For the practical application of the chemosensor, test strips were successfully fabricated for rapid detection of Hg²⁺ ions. Moreover, the utility of NBDP showing the mercury recognition in Human liver cancer cells (SMMC-7721) and zebrafish as well as in live tissues of Arabidopsis thaliana has been demonstrated as monitored by fluorescence imaging.

Detection of Al3+ and Fe3+ ions by nitrobenzoxadiazole bearing pyridine-2,6-dicarboxamide based chemosensors: effect of solvents on detection

Hybrid chemosensors, based on a pyridine-2,6-dicarboxamide fragment while containing a 4-nitrobenzoxadiazole group, are used for the sensing of Al³⁺ and Fe³⁺ ions where detection was significantly controlled by the selection of a solvent.

A novel dithiourea-appended naphthalimide "on-off" fluorescent probe for detecting Hg2+ and Ag+ and its application in cell imaging

An effective dithiourea-appended 1,8-naphthalimide fluorescent probe was designed and synthesized. This probe could recognize Hg²⁺ and Ag⁺ sensitively and selectively in neutral and alkaline conditions. Moreover, the probe detected Hg²⁺ alone at pH between 2 and 6. The sensing ability of the probe was explored by UV-vis, fluorescence, FTIR and ¹H NMR spectroscopy. The probe was quenched by Hg²⁺ and Ag⁺ with 1:1 binding ratios in MeCN/H₂O (4/1, v/v) mixed solution with binding constants of 3.76 × 10⁴ L mol^-1 and 2.47 × 10⁴ L mol^-1, respectively. The linear concentration ranges for Hg²⁺ and Ag⁺ were 0-17 μmol L^-1 and 0-24 μmol L^-1 with detection limits of 0.83 μmol L^-1 and 1.20 μmol L^-1, respectively, which allowed for the quantitative determination of Hg²⁺ and Ag⁺. The new probe, 3a, was successfully applied to the fluorescence imaging of Hg²⁺ and Ag⁺ in HepG2 cells, demonstrating its potential application in biological science. Moreover, 3a was used to measure Hg²⁺ and Ag⁺ in tap water, drinking water and ultrapure water samples. The recoveries of Hg²⁺ and Ag⁺ in water samples were 96-99% and 98-103%, respectively. Therefore, the proposed method showed promising perspectives for its application, aimed at detecting Hg²⁺ and Ag⁺ in fluorescence imaging and real water samples.

A dual-response sensor based on NBD for the highly selective determination of sulfide in living cells and zebrafish

A dual chemosensor, 1-NO₂, showing fluorogenic and colorimetric responses was developed for the detection of sulfide in vitro and in vivo.

A Highly Selective Fluorescent Chemosensor for Detecting Indium(III) with a Low Detection Limit and its Application

A highly selective chemosensor BHC ((E)-N-benzhydryl-2-((2-hydroxynaphthalen-1-yl)methylene)hydrazine-1-carbothioamide) for detecting indium(III) was synthesized. Sensor BHC can detect In(III) by a fluorescence turn-on method. The detection limit was analyzed to be 0.89 μM. Importantly, this value is the lowest among those previously known for fluorescent turn-on In(III) chemosensors. Based on the analytical methods like ESI-mass, Job plot, and theoretical calculations, the detection mechanism for In(III) was illustrated to be chelation-enhanced fluorescence (CHEF) effect. Additionally, sensor BHC was successfully applied to test strips.

A multi-functional chemosensor for highly selective ratiometric fluorescent detection of silver(I) ion and dual turn-on fluorescent and colorimetric detection of sulfide

A multi-functional chemosensor 1 as silver and sulfide detector was synthesized by the combination of octopamine and 4-dimethylaminocinnamaldehyde. Sensor 1 exhibited a ratiometric fluorescence emission for Ag+ from blue to sky. The binding mode of 1 and Ag+ turned out to be a 1 : 1 ratio as determined using Job plot and electrospray ionization (ESI) mass spectral analyses. The sensing mechanism of 1 with silver ion was unravelled by 1H NMR titrations and theoretical calculations. Sensor 1 also discerned sulfide by enhancing fluorescence intensity and changing colour from yellow to colourless in aqueous solution. The sensing properties of 1 toward S2- were investigated by using ESI-mass analysis, Job plot and 1H NMR titrations. Moreover, 1 could be used as a detector for sulfide in a wide pH range.

A highly selective TPE-based AIE fluorescent probe is developed for the detection of Ag+

The detection of Ag⁺ in the environment is very important to determine the level of pollution from silver complexes, which have caused various human health problems. Herein, an aggregation-induced emission (AIE) chromophore (tetraphenylethane, TPE) attached to a benzimidazole group (tetra-benzimidazole, TBI–TPE) is synthesized and utilized to detect Ag⁺ in the environment. The strong chelating effect between the benzimidazole group and Ag⁺ leads to the formation of aggregates, and strong yellow fluorescence signals were observed after adding Ag⁺ into a TBI–TPE solution. The stoichiometry of the complex of TBI–TPE and Ag⁺ was established to be 1 : 2 using photochemical and mass spectra measurements. The detection limit of the Ag⁺ assay is 90 nM with a linear range from 100 nM to 6 μM. This study provides a facile method to determine Ag⁺ in real environmental samples with satisfactory results.

We develop a highly selective TPE-based AIE fluorescent probe containing a benzimidazole group for the detection of Ag⁺.

Triple detection modes for Hg2+ sensing based on a NBD-fluorescent and colorimetric sensor and its potential in cell imaging

The sensor provides highly Hg²⁺-sensitivity and can enhance the emission in live cell.