On-Chip Photonic Detection Techniques for Non-Invasive In Situ Characterizations at the Microfluidic Scale

Microfluidics has emerged as a robust technology for diverse applications, ranging from bio-medical diagnostics to chemical analysis. Among the different characterization techniques that can be used to analyze samples at the microfluidic scale, the coupling of photonic detection techniques and on-chip configurations is particularly advantageous due to its non-invasive nature, which permits sensitive, real-time, high throughput, and rapid analyses, taking advantage of the microfluidic special environments and reduced sample volumes. Putting a special emphasis on integrated detection schemes, this review article explores the most relevant advances in the on-chip implementation of UV-vis, near-infrared, terahertz, and X-ray-based techniques for different characterizations, ranging from punctual spectroscopic or scattering-based measurements to different types of mapping/imaging. The principles of the techniques and their interest are discussed through their application to different systems.

Melt-Encoded-Tags for Expanded Optical Readout in Digital PCR (METEOR-dPCR) Enables Highly Multiplexed Quantitative Gene Panel Profiling

Digital PCR (dPCR) is an important tool for precise nucleic acid quantification in clinical setting, but the limited multiplexing capability restricts its applications for quantitative gene panel profiling. Here, this work describes melt-encoded-tags for expanded optical readout in digital PCR (METEOR-dPCR), a simple two-step assay that enables simultaneous quantification of a large panel of arbitrary genes in a dPCR platform. Target genes are quantitatively converted into DNA tags with unique melting temperatures through a ligation approach. These tags are then counted and distinguished by their melt-curve profiles on a dPCR platform. A multiplexing capacity of M^N, where M is the number of resolvable melting temperature and N is the number of fluorescence channel, can be achieved. This work validates METEOR-dPCR with simultaneous DNA copy number profiling of 60 targets using dPCR in cancer cells, and demonstrates its sensitivity for estimating tumor fraction in mixed tumor and normal DNA samples. The rapid, quantitative, and highly multiplexed METEOR-dPCR assay will have wide appeal for many clinical applications.

One-shot high-resolution melting curve analysis for KRAS point-mutation discrimination on a digital microfluidics platform

Single-nucleotide polymorphism (SNP) plays a critical role in personalized medicine, forensics, pharmacogenetics, and disease diagnostics. Among different existing SNP genotyping techniques, melting curve analysis (MCA) becomes increasingly popular due to its high accuracy and straightforward procedures in extracting the melting temperature (T_m). Yet, its study on existing digital microfluidic (DMF) platforms has intrinsic limitations due to the temperature inhomogeneity within a thickened droplet during the on-chip rapid heating process. Although the utilization of an on-chip thermostat can regulate and monitor the dynamic melting process in real time, the limited T_m accuracy resulting from the insufficient system response time to accommodate the fast-melting evolution still poses a great challenge for precise MCA with high throughput. This work proposes a one-shot MCA on a DMF platform. The tailoring of a functional substrate with hierarchical micro/nano structure enables high-resolution patterning of pL-scale droplets. Specifically, the hydrothermal and photocatalysis treatment allows the functional substrate to exhibit a superwettability contrast of >170°, facilitating passive isolation of the pL-scale DNA sample into highly-resolved pL droplets above the 200 μm superhydrophilic patterns. This high-resolution MCA technique can successfully discriminate KRAS gene targets with single-nucleotide mutations in 3 seconds. The high accuracy and consistency in the acquired T_m when compared with off-chip results demonstrate its opportunities for near-patient diagnostics, precision medicines, genetic counseling, and prevention strategies on DMF platforms.

Evaluation of simple sequence repeats (SSR) and single nucleotide polymorphism (SNP)-based methods in olive varieties from the Northwest of Spain and potential for miniaturization

•

SSR- and SNP-based methods were evaluated for the identification of olive varieties.

•

SNP identification was performed for the first time for two autochthonous varieties.

•

The potential for future miniaturization of the genotyping methods was evaluated.

•

Allele-specific PCR provided the best results for the tested olive varieties.

Miniaturization of DNA-based techniques can bring interesting advantages for food analysis, such as portability of complex analytical procedures. In the olive oil industry, miniaturization can be particularly interesting for authenticity and traceability applications, through in situ control of raw materials before production and/or the final products. However, variety identification is challenging, and implementation on miniaturized settings must be carefully evaluated, starting from the selected analytical approach. In this work, SSR- and SNP-based genotyping strategies were investigated for the identification and differentiation of two olive varieties from the Northwest of Spain. For the selected SNPs two genotyping methods were tested: real-time allele-specific PCR and high resolution melting analysis. These methods were compared and evaluated regarding their potential for integration in a microfluidic device. Both SNP-based methods proved to be successful for identification of the selected varieties, however real-time allele-specific PCR was the one that achieved the best results when analyzing mixtures, allowing the identification of both monovarietal samples and mixtures of the varieties tested with up to 25%.

A microfluidic chip for rapid analysis of DNA melting curves for BRCA2 mutation screening

A microfluidic chip integrated with a microheater and a luminescent temperature sensor for rapid, spatial melting curve analysis was developed and applied for the screening of a breast cancer gene fragment. The method could detect genetic differences in around 3 minutes total for the whole procedure, which is much faster than established procedures. A microfabrication technique was developed to allow for bonding of a temperature sensing thin film and a Pt microheater with PDMS and the chips could be employed to generate and measure thermal gradients and the fluorescence intensity of stained DNA through multispectral optical imaging. The sensing layer consisting of poly(styrene-co-acrylonitrile) and a tris(1,10-phenanthroline)ruthenium(ii) temperature probe was generated by blade coating on a glass substrate with an attached Pt microheater. Calibration of the temperature between 20 and 90 °C yielded an overall resolution of around 0.13 K. The chip was employed for the screening of the BRCA 2 breast cancer gene; BRCA2 exon 5 was differentiated by its mutant rs80359463 by a 1.1 K difference in melting temperature and two fragments of BRCA2 exon 11 were differentiated by their mutants rs276174826 and rs876660311 by 0.7 K and 2.0 K, respectively. The standard deviations were between 0.1 and 0.5 K. Capable of detecting fluorescence in the DNA and temperature simultaneously and being imaged in a customized assembly, this microchip can be used to screen for mutations in a variety of DNA samples in disease diagnosis and prognosis.

A multiplex SNP genotyping by allele-specificspecific PCR based on stem-loop and universal fluorescent primers of Chr1daxin mice

Single nucleotide polymorphisms (SNPs) are one of the most common markers in mammals. Rapid, accurate, and multiplex typing of SNPs is critical for subsequent biological and genetic research. In this study, we have developed a novel method for multiplex genotyping SNPs in mice. The method involves allele-specific PCR amplification of genomic DNA with two stem-loop primers accompanied by two different universal fluorescent primers. Blue and green fluorescent signals were conveniently detected on a DNA sequencer. We verified four SNPs of 65 mice based on the novel method, and it is well suited for multiplex genotyping as it requires only one reaction per sample in a single tube with multiplex PCR. The use of universal fluorescent primers greatly reduces the cost of designing different fluorescent probes for each SNP. Therefore, this method can be applied to many biological and genetic studies, such as multiple candidate gene testing, genome-wide association study, pharmacogenetics, and medical diagnostics.

DNA methylation assay using droplet-based DNA melting curve analysis

DNA methylation is an epigenetic regulation of gene expression, which has drawn great attention in biomedical research due to its association with various diseases. A robust, inexpensive platform to detect and quantify the methylation status in a specific genomic region is necessary. In this study, an on-chip analytical technique of cytosine methylation with droplets in a microchannel is proposed. Genomic DNA samples are encapsulated into a series of droplets and transported through a detection region, where a stable temperature gradient is created. As the temperature is elevated from 60 °C to 85 °C, the DNA samples denature and the associated fluorescence signals decay, with the relationship being acquired as the melting curve. The droplets serve as discrete reactors for conducting DNA melting curve analysis in the liquid phase, thereby eliminating the need for immobilization of reagents. Due to a high heating rate and greater enhanced thermal stability, this microchip allows larger melting temperature differences for the samples at different percentages of methylated DNA. It has an enhanced discrimination ability and lower volume consumption, compared to the commercial qPCR machine. This chip enables quantification of the methylation levels of the pluripotent stem cell factor Oct-4 in its distal enhancer (DE) region, with a designed probe after bisulfite treatment and asymmetric PCR.