2D Material-Based Surface-Enhanced Raman Spectroscopy Platforms (Either Alone or in Nanocomposite Form)-From a Chemical Enhancement Perspective

Surface-enhanced Raman spectroscopy (SERS) is a vibrational spectroscopic technique with molecular fingerprinting capability and high sensitivity, even down to the single-molecule level. As it is 50 years since the observation of the phenomenon, it has now become an important task to discuss the challenges in this field and determine the areas of development. Electromagnetic enhancement has a mature theoretical explanation, while a chemical mechanism which involves more complex interactions has been difficult to elucidate until recently. This article focuses on the 2D material-based platforms where chemical enhancement (CE) is a significant contributor to SERS. In the context of a diverse range (transition metal dichalcogenides, MXenes, etc.) and categories (insulating, semiconducting, semimetallic, and metallic) of 2D materials, the review aims to realize the influence of various factors on SERS response such as substrates (layer thickness, structural phase, etc.), analytes (energy levels, molecular orientation, etc.), excitation wavelengths, molecular resonances, charge-transfer transitions, dipole interactions, etc. Some examples of special treatments or approaches have been outlined for overcoming well-known limitations of SERS and include how CE benefits from the defect-induced physicochemical changes to 2D materials mostly via the charge-transport ability or surface interaction efficiency. The review may help readers understand different phenomena involved in CE and broaden the substrate-designing approaches based on a diverse set of 2D materials.

Detection of water pollutants using super-hydrophobic porous silicon-based SERS substrates

Super hydrophobic porous silicon surface is prepared using a wet chemical synthesis route. Scanning electron microscopic investigation confirms a correlation between pore size and reaction time. SERS substrates are prepared by silver nanoparticle deposition on porous silicon surface. They exhibit excellent characteristics in terms of sensitivity, reproducibility, stability, and uniformity. They could detect rhodamine 6G in femtomolar range with SERS enhancement factor of ~ 6.1 × 1012, which is best ever reported for these substrates. Molecule-specific sensing of water pollutants such as methylene blue, glyphosate, and chlorpyrifos, is demonstrated for concentrations well below their permissible limits along with excellent enhancement factors. Porous silicon substrate functionalized with Ag nanoparticles demonstrates to be a promising candidate for low-cost, long-life, reliable sensors for environmental conservation applications.

Hydrothermal Synthesis of Molybdenum Disulfide Quantum Dots for Highly Sensitive Detection of Iron Ions in Protein Succinate Oral Solution

In this paper, a molybdenum disulfide fluorescent probe with an Fe³⁺ fluorescent system was first synthesized by the hydrothermal method for the detection of iron ion concentration in oral solution of protein succinate. It was characterized by infrared, fluorescence, X-ray photoelectron spectroscopy, scanning electron microscopy, and transmission electron microscopy. The probes were found to have good stability, photobleaching, and storage stability. The effects of dilution, pH, reaction time, and iron ion concentration on the fluorescent system were also investigated. The relative fluorescence intensity [(I₀ - I)/I₀] showed a good linear relationship with the iron ion concentration in the range of 0-50 μM, with the linear equation [(I₀ - I)/I₀] = 0.0148[Fe³⁺] + 0.0833 (r² = 0.9943, n = 11) and the detection limit of 2.43 μM. The reaction mechanism was also explored, as well as its ion selectivity, reversibility, accuracy, precision, and concentration of Fe ions in the actual sample. It was found that the probe can selectively detect Fe ions with a certain degree of reversibility, accuracy, precision, and ideal recovery, and it can be used for the determination of Fe³⁺ in proteosuccinic acid oral solution.

Annealing Temperature-Dependent Surface-Enhanced Raman spectroscopy on MoS2-Covered silver nanoparticle array

Surface-enhanced Raman spectroscopy (SERS) is an ultra-sensitive analytical tool that can effectively detect and identify molecules by their unique vibrational fingerprints. Development of SERS substrates with good stability, high sensitivity and reproducibility is still a big challenge in practical applications. Recently, 2D materials/metallic hybrid SERS substrates provide a new prospect to improve the SERS performance. Here, we obtain a monolayer MoS₂ covered silver nanoparticle (AgNP) array as a high-performance SERS substrate. Annealing temperature-dependent SERS signals on the hybrid substrate have been explored. The optimum SERS performance was obtained at 290 ℃ (the detection limit of 10^-13 M for Rhodamine 6G and the corresponding SERS enhancement factor of 8.3 × 10⁹), which is attributed to the better contact between AgNPs and MoS₂ and the uniform AgNPs with appropriate particle sizes. The prepared MoS₂/AgNPs hybrid substrates also have been utilized to detect various molecules, which demonstrates a great potential for applications in food safety and biochemical environmental detection.

Hybrid Enhancement of Surface-Enhanced Raman Scattering Using Few-Layer MoS2 Decorated with Au Nanoparticles on Si Nanosquare Holes

By combining the excellent biocompatibility of molybdenum disulfide (MoS₂), excellent surface-enhanced Raman scattering (SERS) activity of Au nanoparticles (Au NPs), and large surface area of Si nanosquare holes (NSHs), a structure in which MoS₂ is decorated with Au NPs on Si NSHs, was proposed for SERS applications. The NSH structure fabricated by e-beam lithography possessed 500 nm of squares and a depth of approximately 90 nm. Consequently, a few-layer MoS₂ thin films (2–4 layers) were grown by the sulfurization of the MoO₃ thin film deposited on Si NSHs. SERS measurements indicated that MoS₂ decorated with Au NPs/Si NSHs provided an extremely low limit of detection (ca. 10⁻¹¹ M) for R6G, with a high enhancement factor (4.54 × 10⁹) relative to normal Raman spectroscopy. Our results revealed that a large surface area of the NSH structure would probably absorb more R6G molecules and generate more excitons through charge transfer, further leading to the improvement of the chemical mechanism (CM) effect between MoS₂ and R6G. Meanwhile, the electromagnetic mechanism (EM) produced by Au NPs effectively enhances SERS signals. The mechanism of the SERS enhancement in the structure is described and discussed in detail. By combining the hybrid effects of both CM and EM to obtain a highly efficient SERS performance, MoS₂ decorated with Au NPs/Si NSHs is expected to become a new type of SERS substrate for biomedical detection.

MoS2/graphene van der Waals heterojunctions combined with two-layered Au NP for SERS and catalysis analyse

MoS₂-plasmonic hybrid platforms have attracted significant interest in surface-enhanced Raman scattering (SERS) and plasmon-driven photocatalysis. However, direct contact between the metal and MoS₂ creates strain that deteriorates the electron transport across the metal/ MoS₂ interfaces, which would affect the SERS effect and the catalytic performance. Here, the MoS₂/graphene van der Waals heterojunctions (vdWHs) were fabricated and combined with two-layered gold nanoparticles (Au NP) for SERS and plasmon-driven photocatalysis analyse. The graphene film is introduced to provide an effective buffer layer between Au NP and MoS₂, which not only eliminates the inhomogeneous contact on MoS₂ but also benefits the electron transfer. The substrate exhibits excellent SERS capability realizing ultra-sensitive detection for 4-pyridinethiol molecules. Also, the surface catalytic reaction of p-nitrothiophenol (PNTP) to p,p-dimercaptobenzene (DMAB) conversion was in situ monitored, demonstrating that the vdWHs-plasmonic hybrid could effectively accelerate reaction process. The mechanism of the SERS and catalytic behaviors are investigated via experiments combined with theoretical simulations (finite element method and quantum chemical calculations).

Nanostructure-Based Surface-Enhanced Raman Spectroscopy Techniques for Pesticide and Veterinary Drug Residues Screening

Pesticide and veterinary drug residues in food and environment pose a threat to human health, and a rapid, super-sensitive, accurate and cost-effective analysis technique is therefore highly required to overcome the disadvantages of conventional techniques based on mass spectrometry. Recently, the surface-enhanced Raman spectroscopy (SERS) technique emerges as a potential promising analytical tool for rapid, sensitive and selective detections of environmental pollutants, mostly owing to its possible simplified sample pretreatment, gigantic detectable signal amplification and quick target analyte identification via finger-printing SERS spectra. So theoretically the SERS detection technology has inherent advantages over other competitors especially in complex environmental matrices. The progress in nanostructure SERS substrates and portable Raman appliances will promote this novel detection technology to play an important role in future rapid on-site assay. This paper reviews the advances in nanostructure-based SERS substrates, sensors and relevant portable integrated systems for environmental analysis, highlights the potential applications in the detections of synthetic chemicals such as pesticide and veterinary drug residues, and also discusses the challenges of SERS detection technique for actual environmental monitoring in the future.

Fabrication and Applications of 3D Nanoarchitectures for Advanced Electrocatalysts and Sensors

For the last few decades, nanoscale materials and structures have been extensively studied and developed, making a huge impact on human sustainability. For example, the introduction of nanostructures has brought substantial development in electrocatalysts and optical sensing applications. However, there are still remaining challenges that need to be resolved to further improve their performance, reliability, and cost-effectiveness. Herein, long-range ordered 3D nanostructures and their design principles are introduced with an emphasis on electrocatalysts for energy conversion and plasmonic nanostructures for optical sensing. Among the various fabrication techniques, sequential solvent-injection-assisted nanotransfer printing is suggested as a practical fabrication platform for tunable long-range ordered 3D nanostructures composed of ultrahigh-resolution building blocks. Furthermore, the importance of understanding and controlling the 3D design parameters is discussed to realize more efficient energy conversion as well as effective surface-enhanced Raman spectroscopy analyses, suggesting new solutions for clean energy and healthcare issues.

Optimization and performance analysis of SERS-active suspended core photonic crystal fibers

Recently, surface enhanced Raman spectroscopy (SERS)-active photonic crystal fiber (PCFs) probes have gained great interest for biosensing applications due to the tremendous advantages it has over the conventional planar substrate based SERS measurements, with improvements on the detection sensitivity and reliability in measurements. So far, two main approaches were employed to get the analyte molecule in the vicinity of nanoparticles (NPs) inside PCFs in order to achieve the SERS effect. In the first case, analyte and NPs are pre-mixed and injected inside the holes of the PCF prior to the measurement. In the second approach, controlled anchoring of the NPs inside the inner walls of the PCF was achieved prior to the incorporation of the analyte. Although many studies have been conducted using one configuration or the other, no clear trend is emerging on which one would be the best suited for optimizing the biosensing properties offered by SERS active-PCF. In this paper, we investigate the performances of both configurations along with their interplays with the core size of the PCF probe. We have fabricated several samples of a standard PCF design with different core sizes, and SERS measurements of a standard Raman-active molecule are realized in the same conditions for enabling direct comparisons of the SERS intensity and measurement reliabilities between each configuration, yielding clear directions on the optimization of the SERS-active PCF probe. We envision that this study will pave the way for next-generation clinical biosensors for body fluid analysis, as it exhibits high sensitivity and excellent reliability.

Interaction of two guided-mode resonances in an all-dielectric photonic crystal for uniform SERS

For sensing and imaging applications of surface-enhanced Raman scattering (SERS), one needs a substrate with the capability of generating a consistent and uniform response and increased signal enhancement. To this goal, we propose a photonic-crystal (PC) structure capable of supporting large field enhancement due to its high quality-factor resonance. Moreover, we demonstrate that the interaction of two modes of this all-dielectric PC can provide an almost uniform field enhancement across the unit cell of the PC. This is of practical importance for SERS applications. The designed structure can support a maximum field enhancement of 70 and 97 percent of uniformity.

Development of highly reliable SERS-active photonic crystal fiber probe and its application in the detection of ovarian cancer biomarker in cyst fluid

Conventionally Surface-enhanced Raman spectroscopy (SERS) is realized by adsorbing analytes onto nano-roughened planar substrate coated with noble metals (silver or gold) or their colloidal nanoparticles (NPs). Nanoscale irregularities in such substrates/NPs could lead to SERS sensors with poor reproducibility and repeatability. Herein, we demonstrate a suspended core photonic crystal fiber (PCF) based SERS sensor with extremely high reproducibility and repeatability in measurement with a relative SD of only 1.5% and 4.6%, respectively, which makes it more reliable than any existing SERS sensor platforms. In addition, our platform could improve the detection sensitivity owing to the increased interaction area between the guided light and the analyte, which is incorporated into the holes that runs along the length of the PCF. Numerical calculation established the significance of the interplay between light coupling efficiency and evanescent field distribution, which could eventually determine the sensitivity and reliability of the developed SERS active-PCF sensor. As a proof of concept, using this sensor, we demonstrated the detection of haptoglobin, a biomarker for ovarian cancer, contained within the ovarian cyst fluid, which facilitated in differentiating the stages of cancer. We envision that with necessary refinements, this platform could potentially be translated as a next-generation highly sensitive SERS-active opto-fluidic biopsy needle for the detection of biomarkers in body fluids.

TopUp SERS Substrates with Integrated Internal Standard

Surface-enhanced Raman spectroscopy (SERS) is known as a molecular-specific and highly sensitive method. In order to enable the routine application of SERS, powerful SERS substrates are of great importance. Within this manuscript, a TopUp SERS substrate is introduced which is fabricated by a top-down process based on microstructuring as well as a bottom-up generation of silver nanostructures. The Raman signal of the support material acts as an internal standard in order to improve the quantification capabilities. The analyte molecule coverage of sulfamethoxazole on the surface of the nanostructures is characterized by the SERS signal evolution fitted by a Langmuir-Freundlich isotherm.

Ag Nanorods-Oxide Hybrid Array Substrates: Synthesis, Characterization, and Applications in Surface-Enhanced Raman Scattering

Over the last few decades, benefitting from the sufficient sensitivity, high specificity, nondestructive, and rapid detection capability of the surface-enhanced Raman scattering (SERS) technique, numerous nanostructures have been elaborately designed and successfully synthesized as high-performance SERS substrates, which have been extensively exploited for the identification of chemical and biological analytes. Among these, Ag nanorods coated with thin metal oxide layers (AgNRs-oxide hybrid array substrates) featuring many outstanding advantages have been proposed as fascinating SERS substrates, and are of particular research interest. The present review provides a systematic overview towards the representative achievements of AgNRs-oxide hybrid array substrates for SERS applications from diverse perspectives, so as to promote the realization of real-world SERS sensors. First, various fabrication approaches of AgNRs-oxide nanostructures are introduced, which are followed by a discussion on the novel merits of AgNRs-oxide arrays, such as superior SERS sensitivity and reproducibility, high thermal stability, long-term activity in air, corrosion resistivity, and intense chemisorption of target molecules. Next, we present recent advances of AgNRs-oxide substrates in terms of practical applications. Intriguingly, the recyclability, qualitative and quantitative analyses, as well as vapor-phase molecule sensing have been achieved on these nanocomposites. We further discuss the major challenges and prospects of AgNRs-oxide substrates for future SERS developments, aiming to expand the versatility of SERS technique.

Dense AuNP/MoS2 hybrid fabrication on fiber membranes for molecule separation and SERS detection

Synthesis of uniform and dense metal nanostructures on the whole exposed fiber, instead of simply on the membrane surface, is necessary for controllable separation and sensitive SERS detection.