Ultrasensitive and multiplexed Gastric cancer biomarkers detection with an integrated electrochemical immunosensing platform

Developing immunosensing platforms capable of simultaneously detecting multiple cancer markers is crucial for clinical diagnosis and biomedical research. Here, we introduce a novel dual-mode electrochemical biosensing assay platform capable of detecting two gastric cancer biomarkers: pepsinogen I (PG I) and pepsinogen II (PG II). Methylene blue (MB) and Prussian blue (PB) were used as dual signal sources to label PG I and PG II, respectively. The platform integrates an ARM STM32F411 microcontroller and an AD5941 analog front-end, which not only facilitates cyclic voltammetry (CV) and differential pulse voltammetry (DPV) with efficacy comparable to commercial electrochemical workstations but also offers data collection and synchronous analysis capabilities, allowing simultaneous output of PG I and PGR (PG I/PG II) values. Equipped with an interactive screen for operational control and result display, the immunosensing platform provides linear detection ranges for PG I (5 pg/mL-100 ng/mL) and PG II (50 pg/mL-200 ng/mL), enabling rapid detection within 5 min. It demonstrates excellent sensitivity and selectivity when comparing serum samples from healthy individuals and gastric cancer patients. The dual-marker detection platform significantly enhances early diagnosis and screening of gastric cancer, offering substantial improvements over single-marker assays. Furthermore, this platform shows potential for detecting multiple biomarkers in various diseases, highlighting its utility for biomedical applications.

Redox probe-free electrochemical immunosensor utilizing electropolymerized melamine on reduced graphene oxide for the point-of-care diagnosis of gastric cancer

Pepsinogen I (PG I) is a biomarker that plays a crucial role in the diagnosis of gastric cancer. The development of biosensor to monitor PG I overexpression in serum is crucial for early gastric cancer diagnosis, offering a less invasive alternative to the costly and uncomfortable gastroscopy procedure. This study presents a cost-efficient, scalable and disposable label-free biosensing strategy for detecting PG I, utilizing a redox-active polymelamine electrodeposited on a reduced graphene oxide screen-printed electrode surface (PM-rGO/SPE). Under optimized conditions, the conducting polymer PM was deposited on the rGO/SPE via a potentiodynamic method. The structural and morphological features of PM-rGO/SPE were analyzed with the assistance of Raman and Scanning Electron Microscopy analysis. Specific monoclonal anti-PG I antibodies were immobilized on the in situ prepared redox-active layer via EDC/NHS chemistry to develop a novel electrochemical immunosensor. Unlike the traditional immunosensing strategies which utilizes external redox probe solution for measuring the signal, the developed configuration allowed for redox-probe free monitoring of current changes of the redox active PM resulting from the formation of the immunocomplex on the electrode surface. Utilizing this method, PG I detection spanned a clinically relevant concentration range of 0.01-200 ng/mL, with a low limit of detection at 9.1 pg/mL. The electrochemical immunosensor demonstrated specificity against other biomarkers such as PDCD1, ErBb2, and CD28 with negligible interference. The immunosensor exhibited excellent recovery capabilities for PG I detection in serum samples. These findings underscore the potential of the PM-rGO/SPE immunosensor as a point-of-care diagnostic tool for gastric cancer.

Elucidating Bacterial Spore Dynamics through Lanthanide-Enhanced Live Imaging

Identifying and distinguishing dormant and active bacterial spores are vital for biosecurity, food safety, and space exploration. Yet, there is a lack of simple, quick, and nondestructive methods to achieve this. The common Schaeffer-Fulton method is both sample-destructive and requires significant operator involvement. In this study, we employed lanthanide-beta-diketonate complexes to directly observe both dormant and germinated single spores. Staining is instantaneous and requires minimal sample processing. The complex stains areas outside the core of dormant spores, leaving the core hollow and nonfluorescent. However, upon germination, the complex enters the core, making it brightly fluorescent. This difference was noted in five bacterial species including Bacillus, Clostridium, and Clostridioides. Various lanthanides and beta-diketonates can be mixed to form a range of spore-visualizing complexes. Due to their low toxicity, these complexes allow for live imaging of single germinating spores. We demonstrate low-cost imaging using a USB microscope as well as imaging of spores in milk matrices. This method provides a valuable tool for studying bacterial spores.

Solution-Processed OLED Based on a Mixed-Ligand Europium Complex

An approach to increase the efficiency of europium-based OLEDs was proposed through the formation of a mixed-ligand complex. The design of a series of europium complexes, together with an optimization of the solution deposition, including the host selection, as well as the variation of the solvent and deposition parameters, resulted in a noticeable increase in OLED luminance. As a result, the maximum luminance of the Eu-based OLED reached up to 700 cd/m², which is one of the highest values for an Eu-based solution-processed OLED. Finally, its stability was investigated.

Painless and sensitive pepsinogen I detection: an electrochemical immunosensor based on rhombic dodecahedral Cu3Pt and MoS2 NFs

Gastric cancer (GC) is a common malignant tumour of the digestive tract with a high mortality rate worldwide. However, many patients delay treatment due to the avoidance of the costly and painful procedure of gastroscopy. Therefore, an early convenient screening method is essential to improve the survival rate of GC patients. To address this issue, we constructed an electrochemical immunosensor supported by rhombohedral Cu3Pt and MoS2 nanoflowers (MoS2 NFs) for rapid, painless and quantitative detection of the GC biomarker in vitro. Here, pepsinogen I was employed as a model protein biomarker to analyse the performance of the immunosensor. The rhombohedral dodecahedral Cu3Pt nanoparticles decorated with MoS2-NFs were further functionalized; this allowed the constructed sensor to possess more nano- or micro-structures, thereby improving the detection sensitivity. In specific applications, the corresponding bioactive molecules can be flexibly captured. Under optimal conditions, the immunoassay showed a wide linear range from 500 pg mL-1 to 400 ng mL-1 and a low detection limit of 167 pg mL-1 (S/N = 3). This covers the critical value of 70 ng mL-1, and the results obtained from the analysis of human serum samples were on par with those from the enzyme immunoassay, suggesting significant potential for this new method in daily diagnosis.

Ultrasensitive Detection of COVID-19 Virus N Protein Based on p-Toluenesulfonyl Modified Fluorescent Microspheres Immunoassay

The pandemic of new coronary pneumonia caused by the COVID-19 virus continues to ravage the world. Large-scale population testing is the key to controlling infection and related mortality worldwide. Lateral flow immunochromatographic assay (LFIA) is fast, inexpensive, simple to operate, and easy to carry, very suitable for detection sites. This study developed a COVID-19 N protein detect strip based on p-toluenesulfonyl modified rare earth fluorescent microspheres. The p-toluenesulfonyl-activated nanomaterials provide reactive sulfonyl esters to covalently attach antibodies or other ligands containing primary amino or sulfhydryl groups to the nanomaterial surface. Antibodies are immobilized on these nanomaterials through the Fc region, which ensures optimal orientation of the antibody, thereby increasing the capture rate of the target analyte. The use of buffers with high ionic strength can promote hydrophobic binding; in addition, higher pH could promote the reactivity of the tosyl group. The detection limit of the prepared COVID-19 N protein strips can reach 0.01 ng/mL, so it has great application potential in large-scale population screening.

Eu(tta)3DPPZ-based organic light-emitting diodes: spin-coating vs. vacuum-deposition

The effect of the emission layer deposition method on the characteristics of OLEDs was studied on the example of the europium mixed-ligand complex Eu(tta)3DPPZ (tta: 2-thenoyltrifluoroacetone, DPPZ: dipyrido[3,2-a:2'c,3'c-c]phenazine). The maximum brightnesses of both OLEDs almost coincided, though OLED based on the spin-coated layer operated at lower voltages. The reason for that was the higher density and smoothness of the solution-processed layer.

A smartphone-based biomedical sensory system

Disease diagnostics, food safety monitoring and environmental quality monitoring are the key means to safeguard human health. However, conventional detection devices for health care are costly, bulky and complex, restricting their applications in resource-limited areas of the world. With the rapid development of biosensors and the popularization of smartphones, smartphone-based sensing systems have emerged as novel detection devices that combine the sensitivity of biosensors and diverse functions of smartphones to provide a rapid, low-cost and convenient detection method. In these systems, a smartphone is used as a microscope to observe and count cells, as a camera to record fluorescence images, as an analytical platform to analyze experimental data, and as an effective tool to connect detection devices and online doctors. These systems are widely used for cell analysis, biochemical analysis, immunoassays, and molecular diagnosis, which are applied in the fields of disease diagnostics, food safety monitoring and environmental quality monitoring. Therefore, we discuss four types of smartphone-based sensing systems in this review paper, specifically in terms of the structure, performance and efficiency of these systems. Finally, we give some suggestions for improvement and future prospective trends.

Multiplexed detection of biomarkers in lateral-flow immunoassays

Multiplexed detection of biomarkers, i.e., simultaneous detection of multiple biomarkers in a single assay, can enhance diagnostic precision, improve diagnostic efficiency, reduce diagnostic cost, and alleviate pain of patients.

Label-free detection of pepsinogen 1 and 2 by polyethylene coating Lamb microfluidic device

Early screening of gastric cancer is a critical importance for the improvement of patients' survival rate. Here, a polyethylene coating Lamb (PE-Lamb) microfluidic device with immune layer for gastric cancer label-free detection was constructed. Two serum pepsinogen 1 (PG1) and pepsinogen 2 (PG2) biomarkers were applied to screen and predict the appearance of gastric cancer. Compared with enzyme-linked immunosorbent assay (ELISA), this method achieved a higher sensitivity and less time (40 min vs 120 min). The limit of detections (LOD) were reached 60 pg/mL for PG1 and 30 pg/mL for PG2, which have two orders of magnitude lower than traditional ELISA. The linearity coefficient indexes (R²) for PG1 and PG2 were 0.992 and 0.953 respectively, which is similar to that of ELISA. In addition, PG1 and PG2 mixed antigens sample with human serum was detected by PE-Lamb approach, and the frequency response showed high reproducibility and specificity. The results indicate that PE-lamb diagnostic technique is a novel and promising method for high-throughput screening and early diagnosis of gastric cancer.

Sensitive detection of free bilirubin in blood serum using β-diketone modified europium-doped yttrium oxide nanosheets as a luminescent sensor

Free bilirubin, when present in excess in the human body, can cause a multitude of diseases and disorders and even be fatal; hence, detecting it is of paramount importance. Herein, we report a luminescence quenching-based non-enzymatic method for the convenient, reliable, and rapid detection of free bilirubin in blood serum samples using sensing films (nanosheets/PS, nanosheets-tta/PS, and nanosheets-dbt/PS) as luminescent sensors. The luminescence intensity of the sensing films is linearly related to the free bilirubin concentration. Nanosheets-tta/PS demonstrated excellent sensing properties for the sensitive and reliable detection of free bilirubin in the range of 0.0-60.0 μM with a correlation coefficient of 0.9915, as compared to nanosheets/PS or nanosheets-dbt/PS. The limit of detection for the determination of free bilirubin was 41 nM. This method can be used to design a sensor-based test spot as a medical detection device for the visual detection of free bilirubin.