Soft hydrated sliding interfaces as complex fluids

Hydrogel-Based Therapy for Age-Related Macular Degeneration: Current Innovations, Impediments, and Future Perspectives

Age-related macular degeneration (AMD) is an ocular disease that leads to progressive photoreceptor death and visual impairment. Currently, the most common therapeutic strategy is to deliver anti-vascular endothelial growth factor (anti-VEGF) agents into the eyes of patients with wet AMD. However, this treatment method requires repeated injections, which potentially results in surgical complications and unwanted side effects for patients. An effective therapeutic approach for dry AMD also remains elusive. Therefore, there is a surge of enthusiasm for the developing the biodegradable drug delivery systems with sustained release capability and develop a promising therapeutic strategy. Notably, the strides made in hydrogels which possess intricate three-dimensional polymer networks have profoundly facilitated the treatments of AMD. Researchers have established diverse hydrogel-based delivery systems with marvelous biocompatibility and efficacy. Advantageously, these hydrogel-based transplantation therapies provide promising opportunities for vision restoration. Herein, we provide an overview of the properties and potential of hydrogels for ocular delivery. We introduce recent advances in the utilization of hydrogels for the delivery of anti-VEGF and in cell implantation. Further refinements of these findings would lay the basis for developing more rational and curative therapies for AMD.

Fewer polymer chains but higher adhesion: How gradient-stiffness hydrogel layers mediate adhesion through network stretch

The presence of gradient softer outer layers, commonly observed in biological systems (such as cartilage and ocular tissues), as well as synthetic crosslinked hydrogels, profoundly influences their interactions with opposing surfaces. Our prior research demonstrated that gradient-stiffness hydrogel layers, characterized by increasing elasticity with depth, control contact mechanics, particularly in proximity to the layer thickness. We postulate that the distribution of polymers within these gradient layers imparts extraordinary stretch and adhesion characteristics due to network adaptability and stress-induced reorganization. To investigate this phenomenon, we utilized Atomic Force Microscopy nanoindentation to assess the depth-dependent adhesion behavior of polyacrylamide hydrogels with varying gradient layer thicknesses. Two gradient layer thicknesses were achieved by employing different molding materials: glass and polyoxymethylene (POM). Glass-molded hydrogels exhibited a thinner gradient layer alongside a stiffer bulk layer compared to their POM-molded counterparts. In indentation experiments, the POM-molded hydrogel had larger adhesion compared to glass-molded hydrogel. We find that indenting within the gradient layer engenders increased load-unload hysteresis due to heightened fluid transport in the sparse outer polymer network. Consequently, this led to augmented adhesion and work of separation at shallow depths. We suggest that the prominent stretching capability of the sparse outer polymer network during probe retraction contributes to enhanced adhesion. The Maugis-Dugdale adhesive model only fits well to indentations on the thin layer or indentations which engage significantly with the bulk. These results facilitate a comprehensive characterization of adhesion mechanics in gradient-stiffness hydrogels, which could foster their application across emerging contexts in health science and environmental domains.

Tribological Evaluation of Silica Nanoparticle Enhanced Bilayer Hydrogels as A Candidate for Cartilage Replacement

Polymeric hydrogels can be used as artificial replacement for lesioned cartilage. However, modulating the hydrogel formulation that mimics articular cartilage tissue with respect to mechanical and tribological properties has remained a challenge. This study encompasses the tribological evaluation of a silica nanoparticle (SNP) loaded bilayer nanocomposite hydrogel (NCH), synthesized using acrylamide, acrylic acid, and alginate via modulated free-radical polymerization. Multi-factor pin-on-plate sliding wear experiments were carried out with a steel ball counterface using a linear reciprocating tribometer. Tribological properties of NCHs with 0.6 wt% SNPs showed a significant improvement in the wear resistance of the lubricious layer and a low coefficient of friction (CoF). CoF of both non-reinforced hydrogel (NRH) and NCH at maximum contact pressure ranged from 0.006 to 0.008, which is in the order of the CoF of healthy articular cartilage. Interfacial surface energy was analysed according to Johnson, Kendall, and Robert’s theory, and NCHs showed superior mechanical properties and surface energy compared to NRHs. Lubrication regimes’ models were drawn based on the Stribeck chart parameters, and CoF results were highlighted in the elastoviscous transition regime.

Advances in Understanding Hydrogel Lubrication

Since their inception, hydrogels have gained popularity among multiple fields, most significantly in biomedical research and industry. Due to their resemblance to biological tribosystems, a significant amount of research has been conducted on hydrogels to elucidate biolubrication mechanisms and their possible applications as replacement materials. This review is focused on lubrication mechanisms and covers friction models that have attempted to quantify the complex frictional characteristics of hydrogels. From models developed on the basis of polymer physics to the concept of hydration lubrication, assumptions and conditions for their applicability are discussed. Based on previous models and our own experimental findings, we propose the viscous-adhesive model for hydrogel friction. This model accounts for the effects of confinement of the polymer network provided by a solid surface and poroelastic relaxation as well as the (non) Newtonian shear of a complex fluid on the frictional force and quantifies the frictional response of hydrogels-solid interfaces. Finally, the review delineates potential areas of future research based on the current knowledge.

Precise Correlation of Contact Area and Forces in the Unstable Friction between a Rough Fluoroelastomer Surface and Borosilicate Glass

Stick-slip friction of elastomers arises due to adhesion, high local strains, surface features, and viscous dissipation. In situ techniques connecting the real contact area to interfacial forces can reveal the contact evolution of a rough elastomer surface leading up to gross slip, as well as provide high-resolution dynamic contact areas for improving current slip models. Samples with rough surfaces were produced by the same manufacturing processes as machined seals. In this work, a machined fluoroelastomer (FKM) hemisphere was slid against glass, and the stick-slip behavior was captured optically in situ. The influence of sliding velocity on sliding behavior was studied over a range of speeds from 1 µm/s to 100 µm/s. The real contact area was measured from image sequences thresholded using Otsu’s method. The motion of the pinned region was delineated with a machine learning scheme. The first result is that, within the macroscale sticking, or pinned phase, local pinned and partial slip regions were observed and modeled as a combined contact with contributions to friction by both regions. As a second result, we identified a critical velocity below which the stick-slip motion converted from high frequency with low amplitude to low frequency with high amplitude. This study on the sliding behavior of a viscoelastic machined elastomer demonstrates a multi-technique approach which reveals precise changes in contact area before and during pinning and slip.

Pore-size dependence and slow relaxation of hydrogel friction on smooth surfaces

Hydrogels consist of a cross-linked polymer matrix imbibed with a solvent such as water at volume fractions that can exceed 90%. They are important in many scientific and engineering applications due to their tunable physiochemical properties, biocompatibility, and ultralow friction. Their multiphase structure leads to a complex interfacial rheology, yet a detailed, microscopic understanding of hydrogel friction is still emerging. Using a custom-built tribometer, here we identify three distinct regimes of frictional behavior for polyacrylic acid (PAA), polyacrylamide (PAAm), and agarose hydrogel spheres on smooth surfaces. We find that at low velocities, friction is controlled by hydrodynamic flow through the porous hydrogel network and is inversely proportional to the characteristic pore size. At high velocities, a mesoscopic, lubricating liquid film forms between the gel and surface that obeys elastohydrodynamic theory. Between these regimes, the frictional force decreases by an order of magnitude and displays slow relaxation over several minutes. Our results can be interpreted as an interfacial shear thinning of the polymers with an increasing relaxation time due to the confinement of entanglements. This transition can be tuned by varying the solvent salt concentration, solvent viscosity, and sliding geometry at the interface.

Self-regenerating compliance and lubrication of polyacrylamide hydrogels

Pristine hydrogel surfaces typically have low friction, which is controlled by composition, slip speeds, and immediate slip history. The stiffness of such samples is typically measured with bulk techniques, and is assumed to be homogeneous at the surface. While the surface properties of homogeneous hydrogel samples are generally controlled by composition, the surface also interfaces with the open bath, which distinguishes it from the bulk. In this work, we disrupt as-molded polyacrylamide surfaces with abrasive wear and connect the effects on the surface stiffness and lubrication to the wear events. At both the nanoscale and the microscale, quasistatic indentations reveal a stiffer surface by up to two times following wear events, even considering roughness. Longitudinal experiments with a series of wear episodes interposed with periods of re-equilibration show that increased stiffness is reversible: more compliant surfaces regenerate within 24 hours. The timescale suggests an osmotic swelling mechanism, and we postulate that abrasive wear removes a swollen surface layer, revealing the stiffer bulk. The newly-revealed bulk becomes the surface, which re-swells over time. We quantify the effects on the self-lubricating ability of these surfaces following abrasive wear using micro-tribometry. The lubrication curve shows that robust low friction is maintained, and that the friction becomes less dependent upon the sliding speed. The unique ability of these materials to regenerate swollen surfaces and maintain robust low friction following abrasive wear is promising for designing their slip behavior into aqueous soft robotics components or biomedicine applications.

Microwave induced mechanical activation of hydrogel dimers

When grape-sized aqueous dimers are irradiated in a microwave oven, an intense electromagnetic hotspot forms at their point of contact, often igniting a plasma. Here we show that this irradiation can result in the injection of mechanical energy. By examining irradiated hydrogel dimers through high-speed imaging, we find that they repeatedly bounce off of each other while irradiated. We determine that an average of 1 μJ of mechanical energy is injected into the pair during each collision. Furthermore, a characteristic high-pitched audio signal is found to accompany each collision. We show that both the audio signal and the energy injection arise via an interplay between vaporization and elastic deformations in the region of contact, the so-called 'elastic Liedenfrost effect'. Our results establish a novel, non-contact method of injecting mechanical energy into soft matter systems, suggesting application in fields such as soft robotics.