The self-assembly structure and the CO2-philicity of a hybrid surfactant in supercritical CO2: effects of hydrocarbon chain length

Geometry transformation of ionic surfactants and adsorption behavior on water/n-decane-interface: calculation by molecular dynamics simulation and DFT study

Understanding the effect of surfactant structure on their ability to modify interfacial properties is of great scientific and industrial interest. In this work, we have synthesized four amide based ionic surfactants under acidic or basic conditions, including CTHA·HCl, CTEA·HCl, CTHA⁻Na⁺ and CTEA⁻Na⁺. Experiments have proved that the anionic surfactant with polyethylene oxide groups (CTEA⁻Na⁺) had the lowest surface tension on the water/n-decane interface. Molecular dynamics simulations have been applied to investigate the structural effect on the adsorption behavior of four different surfactants. The surface tension, interface thickness, interface formation energy, density profiles, order parameters, radial distribution function on the water/n-decane interfaces were calculated and compared. During the equilibrium states, we found that the interface configuration of two cationic surfactants are almost linear while the two anionic surfactants are changed to bending shapes due to the different positions of the hydrophilic head groups. Further DFT study and wavefunction analysis of surfactants have shown that CTEA⁻Na⁺ can form stronger vdW interactions with n-decane molecules due to a more neutral electrostatic potential distribution. Meanwhile, the introduction of polyethylene oxide groups has offered more H-bonding sites and resulted in more concentrated H-bonding interactions with water molecules. The difference of weak interactions may contribute to the conformational change and finally affect the interface properties of these ionic surfactants.

The difference of weak interactions may contribute to the conformational change and finally affect the interface properties of these ionic surfactants.

Quantum Chemical Study of the Carbon Dioxide-Philicity of Surfactants: Effects of Tail Functionalization

Carbon dioxide (CO₂)-philic surfactants have broad application prospects in organic synthesis, fracture-enhanced oil recovery, polymerization, extraction, and other fields and can be used to enhance the viscosity of supercritical CO₂ (scCO₂). In this work, the relationship between the functional group of the surfactant tail and CO₂-philicity is studied from a new perspective using density functional theory. Three common functional group types (fluorinated, oxidative, and methyl groups) were investigated. The analysis of binding energy demonstrates that all three types of functional groups can improve the CO₂-philicity of the surfactant. Among these three kinds of functional groups, the strongest interaction with CO₂ molecules is observed for oxidative functional groups followed by semifluorinated, fluorinated, and methyl groups. However, the CO₂ molecules tend to be adsorbed onto the middle segment of the oxidative group, and the intrusion of the CO₂ molecules results in the low solubility of oxidative surfactants. In contrast, fluorinated and methyl groups interact with CO₂ at the end of the surfactant tail. As a result, the fluorinated surfactants show the best solubility in CO₂. Therefore, the solubility of a surfactant in CO₂ is not only related to the interaction strength between the surfactant and CO₂, it also depends on the interaction structure. The results of this study provide a new strategy for evaluating surfactant CO₂-philicity and provide guidance for the design of surfactants with high solubility in scCO₂.

Computer simulation study of fluorocarbon phosphate surfactant based aqueous reverse micelle in supercritical CO2: roles of surfactant functional groups, ionic strength, and phase changes in CO2

Structural and dynamic properties of an aqueous micelle organized from fluorocarbon phosphate surfactant molecules in supercritical carbon dioxide (CO₂) are investigated via molecular dynamics computer simulations. The roles of the functional groups and ionic strength of the surfactants on the formation of reverse micelles in supercritical CO₂, and related water dynamics characterized as translational and reorientational dynamics, are systematically demonstrated by employing three different phosphate-based surfactants paired with sodium cations. The strong electrostatic interactions between the phosphate head groups and sodium cations result in formation of an aqueous core inside the surfactant aggregates, where water molecules are bonded together with loss of the tetrahedral hydrogen bonded network found in bulk water. It is found that all the three surfactants with CO₂-philic fluorocarbon double tails build up well-stabilized reverse micelles in supercritical CO₂, avoiding direct contacts between CO₂ and water molecules. Despite this, the surfactant with a carboxylic ester linkage between the phosphate head and fluorocarbon tail group tends to coordinate water molecules toward sustaining the inter-water hydrogen bonds, indicating better efficiency at covering the aqueous core with hydrophobic groups compared to one without a carboxylic ester group. As for water molecules confined in the reverse micelle, their translational and reorientational motions, and fluctuating dynamics of the inter-water hydrogen bonds, significantly slow down compared to bulk water at ambient temperature. The water dynamics become more restricted with an increase in ionic strength of the anionic surfactant; this is attributed to divalent surfactant heads and sodium cations being more tightly bound together with bonding to water compared to monovalent ones. Lastly, the structural and dynamic changes of the reverse micelle caused by a phase change in CO₂ are monitored with gradually decreasing temperature and pressure from the supercritical to gaseous state for CO₂. The average reverse micelle structure equilibrated in supercritical CO₂ is found to remain stable over a time period of 0.2 ms through a depressurization process to gaseous CO₂. We note that the diverse pathways of surfactant self-aggregation in gaseous CO₂ could be controlled by the preceding solvation procedure in the supercritical regime which governs the final aggregated structures in gaseous CO₂.

Optimal aggregation number of reverse micelles in supercritical carbon dioxide: a theoretical perspective

The aggregation number is one of the most fundamental and important structural parameters for the micelle or reverse micelle (RM) system. In this work, a simple, reliable method for the determination of the aggregation number of RMs in supercritical CO2 (scCO2) was presented through a molecular dynamics simulation. The process of pulling surfactants out of the RMs one by one was performed to calculate the aggregation number. The free energies of RMs with different numbers of surfactants were calculated through this process. We found an RM with the lowest free energy, which was considered to have the optimal number of surfactants. Therefore, the optimal aggregation number of RMs was acquired. In order to explain the existence of an optimal aggregation number, detailed analyses of surfactant accumulation were conducted by combining molecular dynamics with quantum chemistry methods. The results indicated that in the RMs with the lowest free energy, the head-group and tail-terminal of the surfactants accumulated on an equipotential surface. In this case, the surfactant film could effectively separate water and CO2; thus, the lowest free energy was expected. This method determined the aggregation number of RMs by theoretical calculations that did not depend on experimental measurements. This presented approach facilitates the evaluation of the characteristics of RMs in scCO2 and can be further applied in the RM system of organic solvents or even in the micellar system.

Dissipative Particle Dynamics Simulation on Vesicles Self-Assembly Controlled by Terminal Groups

Block copolymer vesicles have been widely used in the field of drug delivery, microreactors, and cell membrane mimetics. Introducing terminal groups to the block copolymer can control the structures of vesicles, which is important for improving the application of vesicles. In this paper, the effects of terminal groups on the structure of vesicles were studied by dissipative particle dynamics simulation. We considered different locations, hydrophobicity, and numbers of terminal groups. When the terminal group located at the end of a hydrophobic block, the increase of wall thickness and the decrease of cavity size of vesicles were observed with the hydrophobicity of the terminal group increasing. In contrast, when the terminal group located at the end of the hydrophilic block, with the hydrophobicity of terminal groups increasing, the vesicular cavity size increased but the wall thickness of vesicles remained nearly unchanged. Finally, increasing the number of terminal groups lead to a decrease of cavity size and an increase of wall thickness of vesicles. The hydrophobic changes of polymer molecules are regarded as the origin of the structural changes of vesicles. This simulation study supplies a potential approach that controls the structures of vesicles and is expected to facilitate its further applications.

Shape transition of water-in-CO2 reverse micelles controlled by the surfactant midpiece

Designing CO₂-philic surfactants for generating wormlike reverse micelles (RMs) is an effective approach to enhance the viscosity of supercritical CO₂ (scCO₂), however this remains challenging.

Aggregation response of triglyceride hydrolysis products in cyclohexane and triolein

Aggregation mechanism and the existence of cmc depend on apolar solvent quality and surfactant head group polarity.

Molecular-Scale Design of Hydrocarbon Surfactant Self-Assembly in Supercritical CO2

Forming wormlike reverse micelles (RMs) by hydrocarbon surfactant self-assembly is an economic and environmental strategy to improve the physicochemical properties of supercritical carbon dioxide (scCO₂), but it remains challenging. Introducing cosurfactant in hydrocarbon surfactant self-assembly system is a potential method to generate wormlike RMs. Here, adopting molecular dynamics simulations, we performed hydrocarbon surfactant (TC14) self-assembly with introducing cosurfactants (C₈Benz). It is found that adding the C₈Benz molecules will induce the spherical RMs to a short rodlike form. In this case, the microstructure of the short rodlike RMs shows a dumbbell-like form that is composed by three parts including a middle part of C₈Benz and two parts of TC14 aggregation at both ends of rodlike RMs, which is regarded as the origin of RMs shape transition. Further, the analysis of free energy for RMs fusion indicates that the high fusion ability of C₈Benz aggregation drives the formation of the dumbbell-like RMs. Accordingly, enhancing the affinity of the C₈Benz is found to be effective strategy to further fusion of rodlike RMs in end-to-end manner, yielding a wormlike RMs with a beads-on-a-string structure. It is expected that this work will provide a valuable information for design the hydrocarbon wormlike RMs and facilitate the potential application of scCO₂.