1
|
Ximenes-Carballo C, Rey-Viñolas S, Blanco-Fernandez B, Pérez-Amodio S, Engel E, Castano O. Combining three-dimensionality and CaP glass-PLA composites: Towards an efficient vascularization in bone tissue healing. BIOMATERIALS ADVANCES 2024; 164:213985. [PMID: 39146606 DOI: 10.1016/j.bioadv.2024.213985] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 02/27/2024] [Revised: 07/30/2024] [Accepted: 08/02/2024] [Indexed: 08/17/2024]
Abstract
Bone regeneration often fails due to implants/grafts lacking vascular supply, causing necrotic tissue and poor integration. Microsurgical techniques are used to overcome this issue, allowing the graft to anastomose. These techniques have limitations, including severe patient morbidity and current research focuses on stimulating angiogenesis in situ using growth factors, presenting limitations, such as a lack of control and increased costs. Non-biological stimuli are necessary to promote angiogenesis for successful bone constructs. Recent studies have reported that bioactive glass dissolution products, such as calcium-releasing nanoparticles, stimulate hMSCs to promote angiogenesis and new vasculature. Moreover, the effect of 3D microporosity has also been reported to be important for vascularisation in vivo. Therefore, we used room-temperature extrusion 3D printing with polylactic acid (PLA) and calcium phosphate (CaP) based glass scaffolds, focusing on geometry and solvent displacement for scaffold recovery. Combining both methods enabled reproducible control of 3D structure, porosity, and surface topography. Scaffolds maintained calcium ion release at physiological levels and supported human mesenchymal stem cell proliferation. Scaffolds stimulated the secretion of vascular endothelial growth factor (VEGF) after 3 days of culture. Subcutaneous implantation in vivo indicated good scaffold integration and blood vessel infiltration as early as one week after. PLA-CaP scaffolds showed increased vessel maturation 4 weeks after implantation without vascular regression. Results show PLA/CaP-based glass scaffolds, made via controlled 3D printing, support angiogenesis and vessel maturation, promising improved vascularization for bone regeneration.
Collapse
Affiliation(s)
- Celia Ximenes-Carballo
- Institute for Bioengineering of Catalonia (IBEC), The Barcelona Institute of Science and Technology (BIST), Barcelona, Spain
| | - Sergi Rey-Viñolas
- Institute for Bioengineering of Catalonia (IBEC), The Barcelona Institute of Science and Technology (BIST), Barcelona, Spain
| | - Barbara Blanco-Fernandez
- Institute for Bioengineering of Catalonia (IBEC), The Barcelona Institute of Science and Technology (BIST), Barcelona, Spain
| | - Soledad Pérez-Amodio
- Institute for Bioengineering of Catalonia (IBEC), The Barcelona Institute of Science and Technology (BIST), Barcelona, Spain; CIBER en Bioingeniería, Biomateriales y Nanomedicina, CIBER-BBN, Madrid, Spain; IMEM-BRT group, Materials Science and Engineering, Polytechnical University of Catalonia (UPC), Barcelona, Spain
| | - Elisabeth Engel
- Institute for Bioengineering of Catalonia (IBEC), The Barcelona Institute of Science and Technology (BIST), Barcelona, Spain; CIBER en Bioingeniería, Biomateriales y Nanomedicina, CIBER-BBN, Madrid, Spain; IMEM-BRT group, Materials Science and Engineering, Polytechnical University of Catalonia (UPC), Barcelona, Spain.
| | - Oscar Castano
- Institute for Bioengineering of Catalonia (IBEC), The Barcelona Institute of Science and Technology (BIST), Barcelona, Spain; CIBER en Bioingeniería, Biomateriales y Nanomedicina, CIBER-BBN, Madrid, Spain; Electronics and Biomedical Engineering, University of Barcelona (UB), Barcelona, Spain; Nanobioengineering and Biomaterials, Institute of Nanoscience and Nanotechnology (IN2UB), Barcelona, Spain.
| |
Collapse
|
2
|
Guimarães CCL, de Souza JR, Campos TMB, Marques TO, Kito LT, Kukulka EC, de Vasconcellos LMR, Borges ALS, Thim GP. Chlorinated-based bioceramics incorporated in polycaprolactone membranes. J Biomed Mater Res B Appl Biomater 2024; 112:e35315. [PMID: 37589245 DOI: 10.1002/jbm.b.35315] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/10/2023] [Revised: 07/15/2023] [Accepted: 07/31/2023] [Indexed: 08/18/2023]
Abstract
The development of bioactive membranes with bone repair properties is great interest in the field of tissue engineering. In this study, we aimed to fabricate and characterize a composite membrane composed of sol-gel synthesized bioceramics and electrospun polycaprolactone (PCL) fibers for bone tissue regeneration applications. The bioceramics were prepared using the sol-gel method with nitrate (N) and chloride (CL) as precursors. PCL and bioceramic solutions were electrospun to obtain ultrafine fiber mats. Raman spectroscopy, x-ray diffraction (XRD), Fourier Transform Infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), and scanning electron microscopy (SEM) were used to characterize the materials. The results showed that both chlorinated and non-chlorinated bioceramics contained NBOs (non-bridge bonds) and crystallized the α-wollastonite phase, with the chlorinated version doing so at lower temperatures. In vitro tests were performed to evaluate cytotoxicity, cell adhesion, and mineralized matrix formation on the membranes. The composite membranes showed improved cell viability and promoted mineralization nodules formation. This study presents a promising approach for the development of bioactive membranes for bone tissue engineering, with potential applications in bone regeneration therapies.
Collapse
Affiliation(s)
| | - Joyce Rodrigues de Souza
- Department of Dental Materials and Prosthodontics, Institute of Science and Technology of São José dos Campos, São Paulo State University (UNESP), São Paulo, Brazil
| | - Tiago Moreira Bastos Campos
- Department of Materials Manufacture and Automation, Technological Institute of Aeronautics (ITA), São Paulo, Brazil
| | - Thays Oliveira Marques
- Department of Bioscience and Oral Diagnosis, Institute of Science and Technology of São José dos Campos, São Paulo State University (UNESP), São Paulo, Brazil
| | - Letícia Terumi Kito
- Department of Materials Manufacture and Automation, Technological Institute of Aeronautics (ITA), São Paulo, Brazil
| | - Elisa Camargo Kukulka
- Department of Dental Materials and Prosthodontics, Institute of Science and Technology of São José dos Campos, São Paulo State University (UNESP), São Paulo, Brazil
| | - Luana Marotta Reis de Vasconcellos
- Department of Bioscience and Oral Diagnosis, Institute of Science and Technology of São José dos Campos, São Paulo State University (UNESP), São Paulo, Brazil
| | - Alexandre Luiz Souto Borges
- Department of Dental Materials and Prosthodontics, Institute of Science and Technology of São José dos Campos, São Paulo State University (UNESP), São Paulo, Brazil
| | - Gilmar Patrocínio Thim
- Department of Materials Manufacture and Automation, Technological Institute of Aeronautics (ITA), São Paulo, Brazil
| |
Collapse
|
3
|
de Souza JR, Kukulka EC, Araújo JCR, Campos TMB, do Prado RF, de Vasconcellos LMR, Thin GP, Borges ALS. Electrospun polylactic acid scaffolds with strontium- and cobalt-doped bioglass for potential use in bone tissue engineering applications. J Biomed Mater Res B Appl Biomater 2023; 111:151-160. [PMID: 35950464 DOI: 10.1002/jbm.b.35141] [Citation(s) in RCA: 3] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/18/2022] [Revised: 06/13/2022] [Accepted: 06/17/2022] [Indexed: 11/11/2022]
Abstract
The development of nanoscale biomaterials associated with polymers has been growing over the years, due to their important structural characteristics for applications in biological systems. The present study aimed to produce and test polymeric scaffolds composed of polylactic acid (PLA) fibers associated with a 58S bioglass doped with therapeutic ions for use in tissue engineering. Three 58S Bioglass was obtained by the sol-gel route, pure and doped with 5% strontium and cobalt ions. Solutions of 7% PLA was used as control and added the three different bioglass, 4% of 58S bioglass (PLA-BG), 4% bioglass-doped strontium (PLA-BGSr) and 4% bioglass-doped cobalt (PLA-BGCo). Scaffolds were produced through electrospinning process, and was characterized chemical and morphologically. The in vitro tests were performed using mesenchymal cells cultures from femurs of nine rats, grown in osteogenic supplemented total culture medium. After osteoblastic differentiation induction cell viability, alkaline phosphatase activity, total protein content quantification, and visualization of mineralization nodule tests were performed. Analysis of normal distribution used the Shapiro-Wilk test (nanofibers diameter and biological assay). Data were compared using the Kruskal-Wallis nonparametric test (p = 0.05). The bioglasses produced proved to be free of nitrate, chlorinated and nano-sized, with effective incorporation of therapeutic ions in their structure. All materials showed cell viability (>70%), total protein production, and alkaline phosphatase activity. It was possible to develop polylactic acid scaffolds associated with 58S bioglass doped with therapeutic ions without cytotoxicity. Scaffolds characteristics appear to sustain its application in bone tissue engineering.
Collapse
Affiliation(s)
- Joyce Rodrigues de Souza
- Department of Dental Materials and Prosthodontics, Institute of Science and Technology of São José dos Campos, São Paulo State University (UNESP), Institute of Science and Technology of São José dos Campos, São Paulo State University (UNESP), São José dos Campos, São Paulo, Brazil
| | - Elisa Camargo Kukulka
- Department of Dental Materials and Prosthodontics, Institute of Science and Technology of São José dos Campos, São Paulo State University (UNESP), Institute of Science and Technology of São José dos Campos, São Paulo State University (UNESP), São José dos Campos, São Paulo, Brazil
| | - Juliani Caroline Ribeiro Araújo
- Department of Bioscience and Oral Diagnosis, Institute of Science and Technology of São José dos Campos, São Paulo State University (UNESP), São José dos Campos, São Paulo, Brazil
| | - Tiago Moreira Bastos Campos
- Technological Institute of Aeronautics (ITA), Praça Marechal Eduardo Gomes, São José dos Campos, São Paulo, Brazil
| | - Renata Falchete do Prado
- Department of Social Dentistry and Children's Clinic, Institute of Science and Technology of São José dos Campos, São Paulo State University (UNESP), São José dos Campos, São Paulo, Brazil
| | - Luana Marotta Reis de Vasconcellos
- Department of Bioscience and Oral Diagnosis, Institute of Science and Technology of São José dos Campos, São Paulo State University (UNESP), São José dos Campos, São Paulo, Brazil
| | - Gilmar Patrocínio Thin
- Technological Institute of Aeronautics (ITA), Praça Marechal Eduardo Gomes, São José dos Campos, São Paulo, Brazil
| | - Alexandre Luiz Souto Borges
- Department of Dental Materials and Prosthodontics, Institute of Science and Technology of São José dos Campos, São Paulo State University (UNESP), Institute of Science and Technology of São José dos Campos, São Paulo State University (UNESP), São José dos Campos, São Paulo, Brazil
| |
Collapse
|
4
|
Lu HT, Huang GY, Chang WJ, Lu TW, Huang TW, Ho MH, Mi FL. Modification of chitosan nanofibers with CuS and fucoidan for antibacterial and bone tissue engineering applications. Carbohydr Polym 2022; 281:119035. [DOI: 10.1016/j.carbpol.2021.119035] [Citation(s) in RCA: 6] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/29/2021] [Revised: 12/17/2021] [Accepted: 12/18/2021] [Indexed: 01/02/2023]
|
5
|
López-Canosa A, Perez-Amodio S, Yanac-Huertas E, Ordoño J, Rodriguez-Trujillo R, Samitier J, Castaño O, Engel E. A microphysiological system combining electrospun fibers and electrical stimulation for the maturation of highly anisotropic cardiac tissue. Biofabrication 2021; 13. [PMID: 33962409 DOI: 10.1088/1758-5090/abff12] [Citation(s) in RCA: 12] [Impact Index Per Article: 4.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/17/2020] [Accepted: 05/07/2021] [Indexed: 12/28/2022]
Abstract
The creation of cardiac tissue models for preclinical testing is still a non-solved problem in drug discovery, due to the limitations related to thein vitroreplication of cardiac tissue complexity. Among these limitations, the difficulty of mimicking the functional properties of the myocardium due to the immaturity of the used cells hampers the obtention of reliable results that could be translated into human patients.In vivomodels are the current gold standard to test new treatments, although it is widely acknowledged that the used animals are unable to fully recapitulate human physiology, which often leads to failures during clinical trials. In the present work, we present a microfluidic platform that aims to provide a range of signaling cues to immature cardiac cells to drive them towards an adult phenotype. The device combines topographical electrospun nanofibers with electrical stimulation in a microfabricated system. We validated our platform using a co-culture of neonatal mouse cardiomyocytes and cardiac fibroblasts, showing that it allows us to control the degree of anisotropy of the cardiac tissue inside the microdevice in a cost-effective way. Moreover, a 3D computational model of the electrical field was created and validated to demonstrate that our platform is able to closely match the distribution obtained with the gold standard (planar electrode technology) using inexpensive rod-shaped biocompatible stainless-steel electrodes. The functionality of the electrical stimulation was shown to induce a higher expression of the tight junction protein Cx-43, as well as the upregulation of several key genes involved in conductive and structural cardiac properties. These results validate our platform as a powerful tool for the tissue engineering community due to its low cost, high imaging compatibility, versatility, and high-throughput configuration capabilities.
Collapse
Affiliation(s)
- Adrián López-Canosa
- Biomaterials for Regenerative Therapies, Institute for Bioengineering of Catalonia (IBEC), The Barcelona Institute of Science and Technology (BIST), Baldiri i Reixac 10-12, 08028 Barcelona, Spain.,CIBER en Bioingeniería, Biomateriales y Nanomedicina (CIBER-BBN), 28029 Madrid, Spain.,Electronics and Biomedical Engineering, Universitat de Barcelona (UB), 08028 Barcelona, Spain
| | - Soledad Perez-Amodio
- Biomaterials for Regenerative Therapies, Institute for Bioengineering of Catalonia (IBEC), The Barcelona Institute of Science and Technology (BIST), Baldiri i Reixac 10-12, 08028 Barcelona, Spain.,CIBER en Bioingeniería, Biomateriales y Nanomedicina (CIBER-BBN), 28029 Madrid, Spain.,IMEM-BRT Group, Department Materials Science and Engineering, EEBE, Technical University of Catalonia (UPC), 08019 Barcelona, Spain
| | - Eduardo Yanac-Huertas
- Biomaterials for Regenerative Therapies, Institute for Bioengineering of Catalonia (IBEC), The Barcelona Institute of Science and Technology (BIST), Baldiri i Reixac 10-12, 08028 Barcelona, Spain.,CIBER en Bioingeniería, Biomateriales y Nanomedicina (CIBER-BBN), 28029 Madrid, Spain
| | - Jesús Ordoño
- Biomaterials for Regenerative Therapies, Institute for Bioengineering of Catalonia (IBEC), The Barcelona Institute of Science and Technology (BIST), Baldiri i Reixac 10-12, 08028 Barcelona, Spain.,CIBER en Bioingeniería, Biomateriales y Nanomedicina (CIBER-BBN), 28029 Madrid, Spain
| | - Romen Rodriguez-Trujillo
- Electronics and Biomedical Engineering, Universitat de Barcelona (UB), 08028 Barcelona, Spain.,Nanobioengineering group, Institute for Bioengineering of Catalonia (IBEC) Barcelona Institute of Science and Technology (BIST), 12 Baldiri i Reixac 15-21, 08028 Barcelona, Spain.,Institute of Nanoscience and Nanotechnology, Universitat de Barcelona (UB), 08028 Barcelona, Spain
| | - Josep Samitier
- CIBER en Bioingeniería, Biomateriales y Nanomedicina (CIBER-BBN), 28029 Madrid, Spain.,Electronics and Biomedical Engineering, Universitat de Barcelona (UB), 08028 Barcelona, Spain.,Nanobioengineering group, Institute for Bioengineering of Catalonia (IBEC) Barcelona Institute of Science and Technology (BIST), 12 Baldiri i Reixac 15-21, 08028 Barcelona, Spain.,Institute of Nanoscience and Nanotechnology, Universitat de Barcelona (UB), 08028 Barcelona, Spain
| | - Oscar Castaño
- Biomaterials for Regenerative Therapies, Institute for Bioengineering of Catalonia (IBEC), The Barcelona Institute of Science and Technology (BIST), Baldiri i Reixac 10-12, 08028 Barcelona, Spain.,CIBER en Bioingeniería, Biomateriales y Nanomedicina (CIBER-BBN), 28029 Madrid, Spain.,Electronics and Biomedical Engineering, Universitat de Barcelona (UB), 08028 Barcelona, Spain.,Institute of Nanoscience and Nanotechnology, Universitat de Barcelona (UB), 08028 Barcelona, Spain
| | - Elisabeth Engel
- Biomaterials for Regenerative Therapies, Institute for Bioengineering of Catalonia (IBEC), The Barcelona Institute of Science and Technology (BIST), Baldiri i Reixac 10-12, 08028 Barcelona, Spain.,CIBER en Bioingeniería, Biomateriales y Nanomedicina (CIBER-BBN), 28029 Madrid, Spain.,IMEM-BRT Group, Department Materials Science and Engineering, EEBE, Technical University of Catalonia (UPC), 08019 Barcelona, Spain
| |
Collapse
|
6
|
Perez-Amodio S, Rubio N, Vila OF, Navarro-Requena C, Castaño O, Sanchez-Ferrero A, Marti-Munoz J, Alsina-Giber M, Blanco J, Engel E. Polymeric Composite Dressings Containing Calcium-Releasing Nanoparticles Accelerate Wound Healing in Diabetic Mice. Adv Wound Care (New Rochelle) 2021; 10:301-316. [PMID: 32602814 DOI: 10.1089/wound.2020.1206] [Citation(s) in RCA: 5] [Impact Index Per Article: 1.7] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/03/2023] Open
Abstract
Objective: Wound healing is a complex process that involves the interaction between different cell types and bioactive factors. Impaired wound healing is characterized by a loss in synchronization of these interactions, resulting in nonhealing chronic wounds. Chronic wounds are a socioeconomic burden, one of the most prominent clinical manifestations of diabetes, however, they lack satisfactory treatment options. The objective of this study was to develop polymeric composites that deliver ions having wound healing properties and evaluate its performance using a pressure ulcer model in diabetic mice. Approach: To develop a polymeric composite wound dressing containing ion-releasing nanoparticles for chronic wound healing. This composite was chemically and physically characterized and evaluated using a pressure ulcer wound model in diabetic (db/db) mice to explore their potential as novel wound dressing. Results: This dressing exhibits a controlled ion release and a good in vitro bioactivity. The polymeric composite dressing treatment stimulates angiogenesis, collagen synthesis, granulation tissue formation, and accelerates wound closure of ischemic wounds created in diabetic mice. In addition, the performance of the newly designed composite is remarkably better than a commercially available dressing frequently used for the treatment of low-exuding chronic wounds. Innovation: The developed nanoplatforms are cell- and growth factor free and control the host microenvironment resulting in enhanced wound healing. These nanoplatforms are available by cost-effective synthesis with a defined composition, offering an additional advantage in potential clinical application. Conclusion: Based on the obtained results, these polymeric composites offer an optimum approach for chronic wound healing without adding cells or external biological factors.
Collapse
Affiliation(s)
- Soledad Perez-Amodio
- Biomedical Research Networking Center in Bioengineering, Biomaterials, and Nanomedicine (CIBER-BBN), Madrid, Spain
- Institute for Bioengineering of Catalonia (IBEC), The Barcelona Institute of Science and Technology, Barcelona, Spain
- Materials Science and Metallurgical Engineering, Polytechnic University of Catalonia (UPC), Barcelona, Spain
| | - Nuria Rubio
- Biomedical Research Networking Center in Bioengineering, Biomaterials, and Nanomedicine (CIBER-BBN), Madrid, Spain
- Catalonian Institute for Advanced Chemistry (IQAC-CSIC), Barcelona, Spain
| | - Olaia F Vila
- Biomedical Research Networking Center in Bioengineering, Biomaterials, and Nanomedicine (CIBER-BBN), Madrid, Spain
- Catalonian Institute for Advanced Chemistry (IQAC-CSIC), Barcelona, Spain
| | - Claudia Navarro-Requena
- Biomedical Research Networking Center in Bioengineering, Biomaterials, and Nanomedicine (CIBER-BBN), Madrid, Spain
- Institute for Bioengineering of Catalonia (IBEC), The Barcelona Institute of Science and Technology, Barcelona, Spain
| | - Oscar Castaño
- Biomedical Research Networking Center in Bioengineering, Biomaterials, and Nanomedicine (CIBER-BBN), Madrid, Spain
- Institute for Bioengineering of Catalonia (IBEC), The Barcelona Institute of Science and Technology, Barcelona, Spain
- Electronics and Biomedical Engineering, Universitat de Barcelona (UB), Barcelona, Spain
- Bioelectronics Unit and Nanobioengineering Lab., Institute for Nanoscience and Nanotechnology of the University of Barcelona (IN2UB), Barcelona, Spain
| | - Aitor Sanchez-Ferrero
- Biomedical Research Networking Center in Bioengineering, Biomaterials, and Nanomedicine (CIBER-BBN), Madrid, Spain
- Institute for Bioengineering of Catalonia (IBEC), The Barcelona Institute of Science and Technology, Barcelona, Spain
| | - Joan Marti-Munoz
- Biomedical Research Networking Center in Bioengineering, Biomaterials, and Nanomedicine (CIBER-BBN), Madrid, Spain
- Institute for Bioengineering of Catalonia (IBEC), The Barcelona Institute of Science and Technology, Barcelona, Spain
| | - Mercè Alsina-Giber
- Department of Dermatology, Hospital Clinic de Barcelona, Universitat de Barcelona, Barcelona, Spain
| | - Jeronimo Blanco
- Biomedical Research Networking Center in Bioengineering, Biomaterials, and Nanomedicine (CIBER-BBN), Madrid, Spain
- Catalonian Institute for Advanced Chemistry (IQAC-CSIC), Barcelona, Spain
| | - Elisabeth Engel
- Biomedical Research Networking Center in Bioengineering, Biomaterials, and Nanomedicine (CIBER-BBN), Madrid, Spain
- Institute for Bioengineering of Catalonia (IBEC), The Barcelona Institute of Science and Technology, Barcelona, Spain
- Materials Science and Metallurgical Engineering, Polytechnic University of Catalonia (UPC), Barcelona, Spain
| |
Collapse
|
7
|
Castaño O, López-Mengual A, Reginensi D, Matamoros-Angles A, Engel E, Del Rio JA. Chemotactic TEG3 Cells' Guiding Platforms Based on PLA Fibers Functionalized With the SDF-1α/CXCL12 Chemokine for Neural Regeneration Therapy. Front Bioeng Biotechnol 2021; 9:627805. [PMID: 33829009 PMCID: PMC8019790 DOI: 10.3389/fbioe.2021.627805] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.7] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/10/2020] [Accepted: 03/01/2021] [Indexed: 12/14/2022] Open
Abstract
(Following spinal cord injury, olfactory ensheathing cell (OEC) transplantation is a promising therapeutic approach in promoting functional improvement. Some studies report that the migratory properties of OECs are compromised by inhibitory molecules and potentiated by chemical concentration differences. Here we compare the attachment, morphology, and directionality of an OEC-derived cell line, TEG3 cells, seeded on functionalized nanoscale meshes of Poly(l/dl-lactic acid; PLA) nanofibers. The size of the nanofibers has a strong effect on TEG3 cell adhesion and migration, with the PLA nanofibers having a 950 nm diameter being the ones that show the best results. TEG3 cells are capable of adopting a bipolar morphology on 950 nm fiber surfaces, as well as a highly dynamic behavior in migratory terms. Finally, we observe that functionalized nanofibers, with a chemical concentration increment of SDF-1α/CXCL12, strongly enhance the migratory characteristics of TEG3 cells over inhibitory substrates.
Collapse
Affiliation(s)
- Oscar Castaño
- Electronics and Biomedical Engineering, Universitat de Barcelona, Barcelona, Spain.,Biomaterials for Regenerative Therapies, Institute of Bioengineering of Catalonia, Parc Cientific de Barcelona, Barcelona, Spain.,CIBER en Bioingeniería, Biomateriales y Nanomedicina, CIBER-BBN, Madrid, Spain.,Bioelectronics Unit and Nanobioeneering Laboratory, Institute for Nanoscience and Nanotechnology of the University of Barcelona, Barcelona, Spain
| | - Ana López-Mengual
- Molecular and Cellular Neurobiotechnology, Institute of Bioengineering of Catalonia, Parc Cientific de Barcelona, Barcelona, Spain.,Department of Cell Biology, Physiology and Immunology, Faculty of Biology, Universitat de Barcelona, Barcelona, Spain.,Centro de Investigación Biomédica en Red sobre Enfermedades Neurodegenerativas, Barcelona, Spain.,Institute of Neurosciences, University of Barcelona, Barcelona, Spain
| | - Diego Reginensi
- School of Medicine, Universidad de Panamá, Panama City, Panama.,Biomedical Engineering Program, Universidad Latina de Panamá, Panama City, Panama
| | - Andreu Matamoros-Angles
- Molecular and Cellular Neurobiotechnology, Institute of Bioengineering of Catalonia, Parc Cientific de Barcelona, Barcelona, Spain.,Department of Cell Biology, Physiology and Immunology, Faculty of Biology, Universitat de Barcelona, Barcelona, Spain.,Centro de Investigación Biomédica en Red sobre Enfermedades Neurodegenerativas, Barcelona, Spain.,Institute of Neurosciences, University of Barcelona, Barcelona, Spain
| | - Elisabeth Engel
- Biomaterials for Regenerative Therapies, Institute of Bioengineering of Catalonia, Parc Cientific de Barcelona, Barcelona, Spain.,CIBER en Bioingeniería, Biomateriales y Nanomedicina, CIBER-BBN, Madrid, Spain.,IMEM-BRT Group, Department of Materials Science, EEBE, Technical University of Catalonia (UPC), Barcelona, Spain
| | - José Antonio Del Rio
- Molecular and Cellular Neurobiotechnology, Institute of Bioengineering of Catalonia, Parc Cientific de Barcelona, Barcelona, Spain.,Department of Cell Biology, Physiology and Immunology, Faculty of Biology, Universitat de Barcelona, Barcelona, Spain.,Centro de Investigación Biomédica en Red sobre Enfermedades Neurodegenerativas, Barcelona, Spain.,Institute of Neurosciences, University of Barcelona, Barcelona, Spain
| |
Collapse
|
8
|
Lepry WC, Nazhat SN. A Review of Phosphate and Borate Sol–Gel Glasses for Biomedical Applications. ADVANCED NANOBIOMED RESEARCH 2021. [DOI: 10.1002/anbr.202000055] [Citation(s) in RCA: 4] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/15/2022] Open
Affiliation(s)
- William C. Lepry
- Department of Mining and Materials Engineering McGill University 3610 Rue University Montreal QC H3A 0C5 Canada
| | - Showan N. Nazhat
- Department of Mining and Materials Engineering McGill University 3610 Rue University Montreal QC H3A 0C5 Canada
| |
Collapse
|
9
|
Xu Z, Wu H, Wang F, Kaewmanee R, Pan Y, Wang D, Qu P, Wang Z, Hu G, Zhao J, Zhao R, Wei J. A hierarchical nanostructural coating of amorphous silicon nitride on polyetheretherketone with antibacterial activity and promoting responses of rBMSCs for orthopedic applications. J Mater Chem B 2020; 7:6035-6047. [PMID: 31545329 DOI: 10.1039/c9tb01565e] [Citation(s) in RCA: 12] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/03/2023]
Abstract
Silicon nitride (SN) with good osteoconductivity has been introduced as an implantable biomaterial for joint replacement and interbody fusion devices. In this study, SN was coated on a polyetheretherketone (PEEK) surface by inductively coupled plasma-enhanced chemical vapor deposition (ICPECVD). The results showed that a dense coating (thickness of about 500 nm) of amorphous SN was closely combined with a PEEK substrate (PKSN) with a binding strength of 6.88 N. In addition, the coating surface showed hierarchical nanostructures containing many spherical bulges (sizes about 150 nm), which were composed of many small humps (sizes about 10 nm). Moreover, the roughness, hydrophilicity, surface energy, surface charge and adsorption of bovine serum albumin (BSA) of PKSN were obviously higher than those of PEEK. After immersion into simulated body fluid (SBF), the Si ions were gradually released from PKSN into SBF and a weak alkaline environment was created. Antibacterial experiments showed that PKSN exhibited a greater antibacterial activity than that of PEEK. Moreover, compared with PEEK, PKSN significantly promoted adhesion, proliferation, differentiation and expression of osteogenic related genes of the rat bone marrow stromal cells (rBMSCs). In conclusion, the SN coating of PKSN with hierarchical nanostructures exhibited excellent antibacterial activity and cytocompatibility, which would make it a great candidate for orthopedic applications.
Collapse
Affiliation(s)
- Zhiyan Xu
- Key Laboratory for Ultrafine Materials of Ministry of Education, East China University of Science and Technology, Shanghai 200237, China.
| | | | | | | | | | | | | | | | | | | | | | | |
Collapse
|
10
|
Dai Y, Chu L, Luo Z, Tang T, Wu H, Wang F, Mei S, Wei J, Wang X, Shang X. Effects of a Coating of Nano Silicon Nitride on Porous Polyetheretherketone on Behaviors of MC3T3-E1 Cells in Vitro and Vascularization and Osteogenesis in Vivo. ACS Biomater Sci Eng 2019; 5:6425-6435. [PMID: 33417795 DOI: 10.1021/acsbiomaterials.9b00605] [Citation(s) in RCA: 9] [Impact Index Per Article: 1.8] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/29/2022]
Abstract
To improve the bioperformances of porous polyetheretherketone (PPK) for bone repair, silicon nitride-coated PPK (CSNPPK) was prepared by a method of suspension coating and melt binding. The results revealed that, as compared with PPK, the surface roughness, compressive strength, and water absorption of CSNPPK increased, while the pore size and porosity of CSNPPK exhibited no obvious changes. In addition, the cellular responses (including attachment, proliferation, and differentiation as well as osteogenically related gene expressions) of the MC3T3-E1 cells to CSNPPK were remarkably promoted compared with PPK and dense polyetheretherketone in vitro. Moreover, in the model of rabbit femoral condyle defects, the results of micro computed tomography and histological and mechanical evaluation revealed that the ingrowth of new vessels and bone tissues into CSNPPK was significantly greater than that into PPK in vivo. Furthermore, the load-displacement and push-out loads for CSNPPK with bone tissues were higher than for PPK, indicating good osseointegration. In short, CSNPPK not only promoted vascularization but also enhanced osteogenesis as well as osseointegration in vivo. Therefore, it can be suggested that CSNPPK with good biocompatibility, osteogenic activity, and vascularization might be a promising candidate as an implant for bone substitute and repair.
Collapse
Affiliation(s)
- Yong Dai
- Shandong University, No. 44 West Wenhua Road, Jinan 250012, China.,Department of Orthopaedics, The Third People's Hospital of Hefei, No. 204, East Wangjiang Road, Hefei 230022, China
| | - Linyang Chu
- Shanghai Key Laboratory of Orthopaedic Implants, Department of Orthopaedic Surgery, Shanghai Ninth People's Hospital, Shanghai Jiao Tong University School of Medicine, No. 115 Jinzun Road, Shanghai 200125, China.,Department of Orthopaedic Surgery, First Affiliated Hospital of USTC, Division of Life Sciences and Medicine, University of Science and Technology of China, No. 17 Lujiang Road, Hefei 230001, China
| | - Zhengliang Luo
- Shandong University, No. 44 West Wenhua Road, Jinan 250012, China
| | - Tingting Tang
- Shanghai Key Laboratory of Orthopaedic Implants, Department of Orthopaedic Surgery, Shanghai Ninth People's Hospital, Shanghai Jiao Tong University School of Medicine, No. 115 Jinzun Road, Shanghai 200125, China
| | - Han Wu
- Key Laboratory for Ultrafine Materials of Ministry of Education, East China University of Science and Technology, No. 130 Meilong Road, Shanghai 200237, China
| | - Fan Wang
- Key Laboratory for Ultrafine Materials of Ministry of Education, East China University of Science and Technology, No. 130 Meilong Road, Shanghai 200237, China
| | - Shiqi Mei
- Key Laboratory for Ultrafine Materials of Ministry of Education, East China University of Science and Technology, No. 130 Meilong Road, Shanghai 200237, China
| | - Jie Wei
- Key Laboratory for Ultrafine Materials of Ministry of Education, East China University of Science and Technology, No. 130 Meilong Road, Shanghai 200237, China
| | - Xuehong Wang
- Key Laboratory for Ultrafine Materials of Ministry of Education, East China University of Science and Technology, No. 130 Meilong Road, Shanghai 200237, China
| | - Xifu Shang
- Department of Orthopaedic Surgery, First Affiliated Hospital of USTC, Division of Life Sciences and Medicine, University of Science and Technology of China, No. 17 Lujiang Road, Hefei 230001, China
| |
Collapse
|
11
|
Marti-Muñoz J, Xuriguera E, Layton JW, Planell JA, Rankin SE, Engel E, Castaño O. Feasible and pure P 2O 5-CaO nanoglasses: An in-depth NMR study of synthesis for the modulation of the bioactive ion release. Acta Biomater 2019; 94:574-584. [PMID: 31141734 DOI: 10.1016/j.actbio.2019.05.065] [Citation(s) in RCA: 4] [Impact Index Per Article: 0.8] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/18/2019] [Revised: 05/19/2019] [Accepted: 05/24/2019] [Indexed: 12/12/2022]
Abstract
The use of bioactive glasses (e.g. silicates, phosphates, borates) has demonstrated to be an effective therapy for the restoration of bone fractures, wound healing and vascularization. Their partial dissolution towards the surrounding tissue has shown to trigger positive bioactive responses, without the necessity of using growth factors or cell therapy, which reduces money-costs, side effects and increases their translation to the clinics. However, bioactive glasses often need from stabilizers (e.g. SiO44-, Ti4+, Co2+, etc.) that are not highly abundant in the body and which metabolization is not fully understood. In this study, we were focused on synthesizing pure calcium phosphate glasses without the presence of such stabilizers. We combined a mixture of ethylphosphate and calcium 2-methoxyethoxide to synthesize nanoparticles with different compositions and degradability. Synthesis was followed by an in-depth nuclear magnetic resonance characterization, complemented with other techniques that helped us to correlate the chemical structure of the glasses with their physiochemical properties and reaction mechanism. After synthesis, the organically modified xerogel (i.e. calcium monoethylphosphate) was treated at 200 or 350 °C and its solubility was maintained and controlled due to the elimination of organics, increase of phosphate-calcium interactions and phosphate polycondensation. To the best of our knowledge, we are reporting the first sol-gel synthesis of binary (P2O5-CaO) calcium phosphate glass nanoparticles in terms of continuous polycondensated phosphate chains structure without the addition of extra ions. The main goal is to straightforward the synthesis, to get a safer metabolization and to modulate the bioactive ion release. Additionally, we shed light on the chemical structure, reaction mechanism and properties of calcium phosphate glasses with high calcium contents, which nowadays are poorly understood. STATEMENT OF SIGNIFICANCE: The use of bioactive inorganic materials (i.e. bioactive ceramics, glass-ceramics and glasses) for biomedical applications is attractive due to their good integration with the host tissue without the necessity of adding exogenous cells or growth factors. In particular, degradable calcium phosphate glasses are completely resorbable, avoiding the retention in the body of the highly stable silica network of silicate glasses, and inducing a more controllable degradability than bioactive ceramics. However, most calcium phosphate glasses include the presence of stabilizers (e.g. Ti4+, Na+, Co2+), which metabolization is not fully understood and complicates their synthesis. The development of binary calcium phosphate glasses with controlled degradability reduces these limitations, offering a simple and completely metabolizable material with higher transfer to the clinics.
Collapse
Affiliation(s)
- Joan Marti-Muñoz
- Biomaterials for Regenerative Therapies, Institute for Bioengineering of Catalonia (IBEC), The Barcelona Institute of Science and Technology (BIST), 08028 Barcelona, Spain; CIBER en Bioingeniería, Biomateriales y Nanomedicina (CIBER-BBN), 28029 Madrid, Spain
| | - Elena Xuriguera
- Materials Science and Physical Chemistry Department, University of Barcelona (UB), 08028 Barcelona, Spain
| | - John W Layton
- Department of Chemistry, University of Kentucky (UKY), Lexington, KY 40506-0053, USA
| | - Josep A Planell
- Biomaterials for Regenerative Therapies, Institute for Bioengineering of Catalonia (IBEC), The Barcelona Institute of Science and Technology (BIST), 08028 Barcelona, Spain; CIBER en Bioingeniería, Biomateriales y Nanomedicina (CIBER-BBN), 28029 Madrid, Spain
| | - Stephen E Rankin
- Chemical and Materials Engineering Department, University of Kentucky (UKY), Lexington, KY 40506-0053, USA
| | - Elisabeth Engel
- Biomaterials for Regenerative Therapies, Institute for Bioengineering of Catalonia (IBEC), The Barcelona Institute of Science and Technology (BIST), 08028 Barcelona, Spain; CIBER en Bioingeniería, Biomateriales y Nanomedicina (CIBER-BBN), 28029 Madrid, Spain; Materials Science and Metallurgy Department (EEBE), Technical University of Catalonia (UPC), 08019 Barcelona, Spain.
| | - Oscar Castaño
- Serra Hunter Fellow, Electronics and Biomedical Engineering Department, University of Barcelona (UB), 08028 Barcelona, Spain; Biomaterials for Regenerative Therapies, Institute for Bioengineering of Catalonia (IBEC), The Barcelona Institute of Science and Technology (BIST), 08028 Barcelona, Spain; CIBER en Bioingeniería, Biomateriales y Nanomedicina (CIBER-BBN), 28029 Madrid, Spain; Institute of Nanoscience and Nanotechnology Department, University of Barcelona (UB), 08028 Barcelona, Spain.
| |
Collapse
|
12
|
Navarro-Requena C, Pérez-Amodio S, Castaño O, Engel E. Wound healing-promoting effects stimulated by extracellular calcium and calcium-releasing nanoparticles on dermal fibroblasts. NANOTECHNOLOGY 2018; 29:395102. [PMID: 30039802 DOI: 10.1088/1361-6528/aad01f] [Citation(s) in RCA: 24] [Impact Index Per Article: 4.0] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/08/2023]
Abstract
Extracellular calcium has been proved to influence the healing process of injuries and could be used as a novel therapy for skin wound healing. However, a better understanding of its effect, together with a system to obtain a controlled release is needed. In this study, we examined whether the ionic dissolution of the calcium-phosphate-based ormoglass nanoparticles coded SG5 may produce a similar stimulating effect as extracellular calcium (from CaCl2) on rat dermal fibroblast in vitro. Cells were cultured in the presence of medium containing different calcium concentrations, normally ranging from 0.1 to 3.5 mM Ca2+. A concentration of 3.5 mM of CaCl2 increased metabolic activity, in vitro wound closure, matrix metalloproteinases (MMP) activity, collagen synthesis and cytokine expression, and reduced cell contraction capacity. Interestingly, the levels of migration and contraction capacity measured followed a dose-dependent behavior. In addition, media conditioned with SG5 stimulated the same activities as media conditioned with CaCl2, but undesired effects in chronic wound healing such as inflammatory factor expression and MMP activity were reduced compared to the equivalent CaCl2 concentration. In summary, calcium-releasing particles such as SG5 are potential biological-free biostimulators to be applied in dressings for chronic wound healing.
Collapse
Affiliation(s)
- Claudia Navarro-Requena
- Biomaterials for Regenerative Therapies. Institute for Bioengineering of Catalonia (IBEC), The Barcelona Institute of Science and Technology, Baldiri Reixac 10-12, E-08028 Barcelona Spain. Centro de Investigación Biomédica en Red en Bioingeniería Biomateriales y Nanomedicina (CIBER-BBN) E-28029 Madrid, Spain. Materials Science and Metallurgical Engineering, EEBE, Universitat Politècnica de Catalunya (UPC), C/ Eduard Maristany 10-14, 08019 Barcelona, Spain
| | | | | | | |
Collapse
|