Bioactive peptide functionalized aligned cyclodextrin nanofibers for neurite outgrowth

Peptide Biomaterials for Tissue Regeneration

Expanding the toolbox of therapeutic materials for soft tissue and organ repair has become a critical component of tissue engineering. While animal- and plant-derived proteins are the foundation for developing biomimetic tissue constructs, using peptides as either constituents or frameworks for the materials has gained increasing momentum in recent years. This mini review discusses recent advances in peptide-based biomaterials' design and application. We also discuss some of the future challenges posed and opportunities opened by peptide-based structures in the field of tissue engineering and regenerative medicine.

A Combined Conduit-Bioactive Hydrogel Approach for Regeneration of Transected Sciatic Nerves

Transected peripheral nerve injury (PNI) affects the quality of life of patients, which leads to socioeconomic burden. Despite the existence of autografts and commercially available nerve guidance conduits (NGCs), the complexity of peripheral nerve regeneration requires further research in bioengineered NGCs to improve surgical outcomes. In this work, we introduce multidomain peptide (MDP) hydrogels, as intraluminal fillers, into electrospun poly(ε-caprolactone) (PCL) conduits to bridge 10 mm rat sciatic nerve defects. The efficacy of treatment groups was evaluated by electromyography and gait analysis to determine their electrical and motor recovery. We then studied the samples' histomorphometry with immunofluorescence staining and automatic axon counting/measurement software. Comparison with negative control group shows that PCL conduits filled with an anionic MDP may improve functional recovery 16 weeks postoperation, displaying higher amplitude of compound muscle action potential, greater gastrocnemius muscle weight retention, and earlier occurrence of flexion contracture. In contrast, PCL conduits filled with a cationic MDP showed the least degree of myelination and poor functional recovery. This phenomenon may be attributed to MDPs' difference in degradation time. Electrospun PCL conduits filled with an anionic MDP may become an attractive tissue engineering strategy for treating transected PNI when supplemented with other bioactive modifications.

Peptide framework for screening the effects of amino acids on assembly

Discovery of peptide domains with unique intermolecular interactions is essential for engineering peptide-based materials. Rather than attempting a brute-force approach, we instead identify a previously unexplored strategy for discovery and study of intermolecular interactions: “co-assembly of oppositely charged peptide” (CoOP), a framework that “encourages” peptide assembly by mixing two oppositely charged hexapeptides. We used an integrated computational and experimental approach, probed the free energy of association and probability of amino acid contacts during co-assembly with atomic-resolution simulations, and correlated them to the physical properties of the aggregates. We introduce CoOP with three examples: dialanine, ditryptophan, and diisoleucine. Our results indicated that the opposite charges initiate the assembly, and the subsequent stability is enhanced by the presence of an undisturbed hydrophobic core. CoOP represents a unique, simple, and elegant framework that can be used to identify the structure-property relationships of self-assembling peptide-based materials.

Micro-scaffolds as synthetic cell niches: recent advances and challenges

Micro-fabrication and nano-fabrication provide useful approaches to address fundamental biological questions by mimicking the physiological microenvironment in which cells carry out their functions. In particular, 2D patterns and 3D scaffolds obtained via lithography, direct laser writing, and other techniques allow for shaping hydrogels, synthetic polymers and biologically derived materials to create structures for (single) cell culture. Applications of micro-scaffolds mimicking cell niches include stem cell self-renewal, differentiation, and lineage specification. This review moves from technological aspects of scaffold microfabrication for cell biological applications to a broad overview of advances in (stem) cell research: achievements for embryonic, induced pluripotent, mesenchymal, and neural stem cells are treated in detail, while a particular section is dedicated to micro-scaffolds used to study single cells in basic cell biology.

3D Electrospun Nanofiber-Based Scaffolds: From Preparations and Properties to Tissue Regeneration Applications

Electrospun nanofibers have been frequently used for tissue engineering due to their morphological similarities with the extracellular matrix (ECM) and tunable chemical and physical properties for regulating cell behaviors and functions. However, most of the existing electrospun nanofibers have a closely packed two-dimensional (2D) membrane with the intrinsic shortcomings of limited cellular infiltration, restricted nutrition diffusion, and unsatisfied thickness. Three-dimensional (3D) electrospun nanofiber-based scaffolds can provide stem cells with 3D microenvironments and biomimetic fibrous structures. Thus, they have been demonstrated to be good candidates for in vivo repair of different tissues. This review summarizes the recent developments in 3D electrospun nanofiber-based scaffolds (ENF-S) for tissue engineering. Three types of 3D ENF-S fabricated using different approaches classified into electrospun nanofiber 3D scaffolds, electrospun nanofiber/hydrogel composite 3D scaffolds, and electrospun nanofiber/porous matrix composite 3D scaffolds are discussed. New functions for these 3D ENF-S and properties, such as facilitated cell infiltration, 3D fibrous architecture, enhanced mechanical properties, and tunable degradability, meeting the requirements of tissue engineering scaffolds were discovered. The applications of 3D ENF-S in cartilage, bone, tendon, ligament, skeletal muscle, nerve, and cardiac tissue regeneration are then presented with a discussion of current challenges and future directions. Finally, we give summaries and future perspectives of 3D ENF-S in tissue engineering and clinical transformation.

Polymer-free cyclodextrin and natural polymer-cyclodextrin electrospun nanofibers: A comprehensive review on current applications and future perspectives

The present review discusses the use of cyclodextrins and their derivatives to prepare electrospun nanofibers with specific features. Cyclodextrins, owing to their unique capability to form inclusion complexes with hydrophobic and volatile molecules, can indeed facilitate the encapsulation of bioactive compounds in electrospun nanofibers allowing fast-dissolving products for food, biomedical, and pharmaceutical purposes, filtering materials for wastewater and air purification, as well as a variety of other technological applications. Additionally, cyclodextrins can improve the processability of naturally occurring biopolymers helping the fabrication of "green" materials with a strong industrial relevance. Hence, this review provides a comprehensive state-of-the-art of different cyclodextrins-based nanofibers including those made of pure cyclodextrins, of polycyclodextrins, and those made of natural biopolymer functionalized with cyclodextrins. To this end, the advantages and disadvantages of such approaches and their possible applications are investigated along with the current limitations in the exploitation of electrospinning at the industrial level.

Superstructured Biomaterials Formed by Exchange Dynamics and Host-Guest Interactions in Supramolecular Polymers

Dynamic and reversible assembly of molecules is ubiquitous in the hierarchical superstructures of living systems and plays a key role in cellular functions. Recent work from the laboratory reported on the reversible formation of such superstructures in systems of peptide amphiphiles conjugated to oligonucleotides and electrostatically complimentary peptide sequences. Here, a supramolecular system is reported upon where exchange dynamics and host-guest interactions between β-cyclodextrin and adamantane on peptide amphiphiles lead to superstructure formation. Superstructure formation with bundled nanoribbons generates a mechanically robust hydrogel with a highly porous architecture that can be 3D printed. Functionalization of the porous superstructured material with a biological signal results in a matrix with significant in vitro bioactivity toward neurons that could be used as a supramolecular model to design novel biomaterials.

Natural and Synthetic Biomaterials for Engineering Multicellular Tumor Spheroids

The lack of in vitro models that represent the native tumor microenvironment is a significant challenge for cancer research. Two-dimensional (2D) monolayer culture has long been the standard for in vitro cell-based studies. However, differences between 2D culture and the in vivo environment have led to poor translation of cancer research from in vitro to in vivo models, slowing the progress of the field. Recent advances in three-dimensional (3D) culture have improved the ability of in vitro culture to replicate in vivo conditions. Although 3D cultures still cannot achieve the complexity of the in vivo environment, they can still better replicate the cell-cell and cell-matrix interactions of solid tumors. Multicellular tumor spheroids (MCTS) are three-dimensional (3D) clusters of cells with tumor-like features such as oxygen gradients and drug resistance, and represent an important translational tool for cancer research. Accordingly, natural and synthetic polymers, including collagen, hyaluronic acid, Matrigel^®, polyethylene glycol (PEG), alginate and chitosan, have been used to form and study MCTS for improved clinical translatability. This review evaluates the current state of biomaterial-based MCTS formation, including advantages and disadvantages of the different biomaterials and their recent applications to the field of cancer research, with a focus on the past five years.

Understanding the Uptake Mechanism and Interaction Potential of the Designed Peptide and Preparation of Composite Fiber Matrix for Fungal Keratitis

The conventional use of antibiotics for the treatment of infectious keratitis currently faces two major challenges: poor drug penetration and the emergence of antibiotic resistance in microbial strains. Cell-penetrating peptides (CPPs) with antimicrobial properties have the potential to address these challenges. However, their mode of action, mechanism of uptake, and interaction potential have not been explored in detail. In this study, we probed the mechanism of uptake and interaction potential of our previously designed peptides (VRF005 and VRF007). Our results showed that VRF005 undergoes direct translocation and induces a rough membrane surface, whereas VRF007 undergoes clathrin-mediated endocytic uptake. The gel shift assay showed that VRF005 is bound to genomic DNA, whereas VRF007 is bound to chitin and β-d-glucan. Gene expression studies revealed the effect of peptide VRF005 on Candida albicans transcription. Molecular docking and simulations showed that VRF005 forms noncovalent interactions (such as H-bonding and water bridges) with natamycin. It exhibited synergistic antifungal activity in the colony-forming assay. VRF005, functionalized in the polycaprolactone fiber matrix, showed sustained delivery and antifungal activity.

Controlling Neuronal Cell Growth through Composite Laminin Supramolecular Hydrogels

Designing an extracellular matrix mimic by biofunctionalization of polymeric scaffolds is a popular strategy and extremely crucial for facilitating the interactions between cells and the matrix. To this direction, supramolecular gels are gaining exponential attention over the last few years, owing to their potential biocompatibility and biodegradability. In spite of diverse biological roles of native laminin, the bioactivities of self-assembling laminin-derived short peptides were less explored. In this work, we have explored the minimalist design to develop hydrogel scaffolds based on IKVAV and YIGSR peptides individually and their composite matrix, which can provide structurally and functionally relevant materials for tissue engineering. Till date, composite supramolecular gels solely made up of self-assembling IKVAV and YIGSR peptides have never been reported. Such composite gels can be a closer mimic of natural laminin protein, which could mimic the essential functions of the short peptide fragments present on different chains of the extracellular matrix protein, laminin. Interestingly, we used a unique strategy of simple mixing of the two laminin mimetic peptides, which tend to induce coassembly with a self-sorted nanofibrous network with relatively enhanced mechanical strength. The physicochemical properties of the biofunctional hydrogels were studied using different microscopic, spectroscopic, and rheology techniques. To assess the bioactivity of laminin-derived scaffolds in controlling neuronal cell growth, its biocompatibility, cellular growth, and proliferation were quantified using C6 glial cells and SHSY5Y neuroblastoma cells. The live/dead staining further confirmed the adhesion and proliferation of the cells. A significant increase in neurite length provides clear evidence on mimicking the neurite extension function of native laminin protein by its short derivatives. Interestingly, similar β-III tubulin expression and cell cycle phases were observed, in comparison to control, which indicated normal cellular functioning of the cells cultured over short laminin hydrogel scaffolds. All bioassays suggested that Fmoc YIGSR promotes growth of neural cells to a greater extent and maintains healthier morphology, in comparison to hydrophobic Fmoc IKVAV, owing to the entangled longer fibrous network formed by YIGSR peptide. It is expected that thinner long fibers provide a more uniform surface and are more supportive for cell adhesion in comparison to hydrophobic, shorter fibers IKVAV peptide. However, in composite gels, the detrimental effect of hydrophobic IKVAV peptide could be reduced and better adhesion and proliferation could be achieved along with enhanced cell survival. These observations demonstrate the high potential of the laminin-derived hydrogels in tissue engineering and neuronal stem cell differentiation in future.

Progress in electrospun composite nanofibers: composition, performance and applications for tissue engineering

The discovery of novel methods to fabricate optimal scaffolds that mimic both mechanical and functional properties of the extracellular matrix (ECM) has always been the "holy grail" in tissue engineering. In recent years, electrospinning has emerged as an attractive material fabrication method and has been widely applied in tissue engineering due to its capability of producing non-woven and nanoscale fibers. However, from the perspective of biomimicry, it is difficult for single-component electrospun fiber membranes to achieve the biomimetic purposes of the multi-component extracellular matrix. Based on electrospinning, various functional components can be efficiently and expediently introduced into the membranes, and through the complementation and correlation of the properties of each component, composite materials with comprehensive and superior properties are obtained while maintaining the primitive merits of each component. In this review, we will provide an overview of the attempts made to fabricate electrospinning-based composite tissue engineering materials in the past few decades, which have been divided into organic additives, inorganic additives and organic-inorganic additives.

Peptide nanostructures on nanofibers for peripheral nerve regeneration

Self-assembled peptide nanofibrous scaffolds with designer sequences, similar to neurite growth promoting molecules enhance the differentiation of neural stem cells. However, self-assembled peptide nanofibrous scaffolds lack the required mechanical strength to suffice to bridge long critical-sized peripheral nerve defects. Hence, there is a demand for a potential neural substrate, which could be biomimetic coupled with bioactive nanostructures to regrow the denuded axons towards the distal end. In the present study, we developed designer self-assembling peptide-based aligned poly(lactic-co-glycolic acid) (PLGA) nanofibrous scaffolds by simple surface coating of peptides or coelectrospinning. Retention of secondary structures of peptides in peptide-coated and cospun fibers was confirmed by circular dichroism spectroscopy. The rod-like peptide nanostructures enhance the typical bipolar morphology of Schwann cells. Although the peptide-coated PLGA scaffolds exhibited significant increase in Schwann cell proliferation than pristine PLGA and PLGA-peptide cospun scaffolds (p < .05), peptide cospun scaffolds demonstrated better cellular infiltration and significantly higher gene expression of neural cell adhesion molecule, glial fibrillary acidic protein, and peripheral myelin protein22 compared to the pristine PLGA and PLGA-peptide-coated scaffolds. Our results demonstrate the positive effects of aligned peptide coelectrospun scaffolds with biomimetic cell recognition motifs towards functional proliferation of Schwann cells. These scaffolds could subsequently repair peripheral nerve defects by augmenting axonal regeneration and functional nerve recovery.

Multi-dimensional bioinspired tactics using an engineered mussel protein glue-based nanofiber conduit for accelerated functional nerve regeneration

Limited regenerative capacity of the nervous system makes treating traumatic nerve injuries with conventional polymer-based nerve grafting a challenging task. Consequently, utilizing natural polymers and biomimetic topologies became obvious strategies for nerve conduit designs. As a bioinspired natural polymer from a marine organism, mussel adhesive proteins (MAPs) fused with biofunctional peptides from extracellular matrix (ECM) were engineered for accelerated nerve regeneration by enhancing cell adhesion, proliferation, neural differentiation, and neurite formation. To physically promote contact guidance of neural and Schwann cells and to achieve guided nerve regeneration, MAP was fabricated into an electrospun aligned nanofiber conduit by introducing synthetic polymer poly(lactic-co-glycolic acid) (PLGA) to control solubility and mechanical property. In vitro and in vivo experiments demonstrated that the multi-dimensional tactics of combining adhesiveness from MAP, integrin-mediated interaction from ECM peptides (in particular, IKVAV derived from laminin α1 chain), and contact guidance from aligned nanofibers synergistically accelerated functional nerve regeneration. Thus, MAP-based multi-dimensional approach provides new opportunities for neural regenerative applications including nerve grafting. STATEMENT OF SIGNIFICANCE: Findings in neural regeneration indicate that a bioinspired polymer-based nerve conduit design should harmoniously constitute various factors, such as biocompatibility, neurotrophic molecule, biodegradability, and contact guidance. Here, we engineered three fusion proteins of mussel-derived adhesive protein with ECM-derived biofunctional peptides to simultaneously provide biocompatibility and integrin-based interactions. In addition, a fabrication of robust aligned nanofiber conduits containing the fusion proteins realized suitable biodegradability and contact guidance. Thus, our multi-dimensional strategy on conduit design provided outstanding biocompatibility, biodegradability, integrin-interaction, and contact guidance to achieve an accelerated functional nerve regeneration. We believe that our bioengineered mussel adhesive protein-based multi-dimensional strategy would offer new insights into the design of nerve tissue engineering biomaterials.

Strategic design of peptide-decorated aligned nanofibers impregnated with triiodothyronine for neural regeneration

Nerve injuries are often debilitating as its regeneration occurs in a slow and laborious manner. Remediation of nerve injury is a colossal task as functional restoration in larger gaps seldom occurs due to the complex nerve regeneration mechanism. A nanofiber-based graft material has been fabricated to provide topographical and biochemical cues to encourage neural differentiation. Laminin plays a crucial role in supporting peripheral nerve regeneration and hence aligned polyvinyl cinnamate nanofibers surface-conjugated with laminin-derived cell-adhesion peptides have been fabricated to improve selective neural adhesion and regeneration. Further, triiodothyronine has been encapsulated within the nanofibers enabling its sustained release so as to bolster regeneration and reinstate the lost functionality to the damaged nerve. The fabricated nanofibers were characterized for its physicochemical, morphological, and topographical properties. Nanofibers were biocompatible, improved cell adhesion rate, and illustrated favourable interaction with cells. Gene expression (showed 9.5 and 4.1 fold increase in β-tubulin and MAP 2 expression, respectively) and protein expression (immunofluorescence, flow cytometry, and western blot) studies confirmed the positive influence of the scaffold over cell differentiation. The studies were extrapolated to adult zebrafish model with a surgical incision in posterior lateral line. The biocomposite treated group showed earlier functional restoration of the nerve compared with control groups detected by touch-evoked response. Thus, the combination of aligned nanofibers providing topographical cue, along with the peptides and triiodothyronine serving as biochemical cues, has a robust potential to restore functionality to the injured nerve, thereby opening avenues for fabrication of regenerative nerve grafts.

Self-assembling peptides cross-linked with genipin: resilient hydrogels and self-standing electrospun scaffolds for tissue engineering applications

Self-assembling peptides (SAPs) are synthetic bioinspired biomaterials that can be feasibly multi-functionalized for applications in surgery, drug delivery, optics and tissue engineering (TE). Despite their promising biocompatibility and biomimetic properties, they have never been considered real competitors of polymers and/or cross-linked extracellular matrix (ECM) natural proteins. Indeed, synthetic SAP-made hydrogels usually feature modest mechanical properties, limiting their potential applications, due to the transient non-covalent interactions involved in the self-assembling phenomenon. Cross-linked SAP-hydrogels have been recently introduced to bridge this gap, but several questions remain open. New strategies leading to stiffer gels of SAPs may allow for a full exploitation of the SAP technology in TE and beyond. We have developed and characterized a genipin cross-linking strategy significantly increasing the stiffness and resiliency of FAQ(LDLK)3, a functionalized SAP already used for nervous cell cultures. We characterized different protocols of cross-linking, analyzing their dose and time-dependent efficiency, influencing stiffness, bioabsorption time and molecular arrangements. We choose the best developed protocol to electrospin into nanofibers, for the first time, self-standing, water-stable and flexible fibrous mats and micro-channels entirely made of SAPs. This work may open the door to the development and tailoring of bioprostheses entirely made of SAPs for different TE applications.

Alignment and bioactive molecule enrichment of bio-composite scaffolds towards peripheral nerve tissue engineering

Providing topographical cues along with chemical and biological factors is essential for biomimetic scaffolds applied in nerve tissue engineering.

Laminin-1 acts as an adhesive for odontoblast-like cells and promotes their differentiation toward a hard tissue-forming phenotype

The present study was designed to investigate the effect of laminin-1 (LN-1 or LN-111) on an odontoblast-like cell line, MDPC-23. Wells of non-treated polystyrene plates were coated with various concentrations of LN-1 (0.1, 1, 10, and 100 µg/mL) and left to dry for 2 days. Water-coated surfaces were used as controls. MDPC-23 cell proliferation, differentiation and mineralization were evaluated in terms of the CCK-8 assay, ALP activity, real-time RT-PCR and Alizarin red staining. The data indicated that LN-1 promoted the proliferation of MDPC-23 cells in a concentration-dependent manner. Moreover, it enhanced ALP activity and expression of key odontogenic genes (DMP-1 and DSPP) upon addition of mineralization reagents, leading to significant promotion of calcification by the cells. These results demonstrate that LN-1 acts as an adhesive for odontoblast-like cells, allowing up-regulation of odontogenic genes and accelerating matrix mineralization. In the context of the present study, the optimal LN-1 coating concentration for MDPC-23 cells was suggested to be 100 µg/mL.

Cyclodextrins as versatile building blocks for regenerative medicine

Cyclodextrins (CDs) are one of the most versatile substances produced by nature, and it is in the aqueous biological environment where the multifaceted potential of CDs can be completely unveiled. CDs form inclusion complexes with a variety of guest molecules, including polymers, producing very diverse biocompatible supramolecular structures. Additionally, CDs themselves can trigger cell differentiation to distinct lineages depending on the substituent groups and also promote salt nucleation. These features together with the affinity-driven regulated release of therapeutic molecules, growth factors and gene vectors explain the rising interest for CDs as building blocks in regenerative medicine. Supramolecular poly(pseudo)rotaxane structures and zipper-like assemblies exhibit outstanding viscoelastic properties, performing as syringeable implants. The sharp shear-responsiveness of the supramolecular assemblies is opening new avenues for the design of bioinks for 3D printing and also of electrospun fibers. CDs can also be transformed into polymerizable monomers to prepare alternative nanostructured materials. The aim of this review is to analyze the role that CDs may play in regenerative medicine through the analysis of the last decade research. Most applications of CD-based scaffolds are focussed on non-healing bone fractures, cartilage reparation and skin recovery, but also on even more challenging demands such as neural grafts. For the sake of clarity, main sections of this review are organized according to the architecture of the CD-based scaffolds, mainly syringeable supramolecular hydrogels, 3D printed scaffolds, electrospun fibers, and composites, since the same scaffold type may find application in different tissues.

Hierarchical Self-Assembly of Histidine-Functionalized Peptide Amphiphiles into Supramolecular Chiral Nanostructures

Controlling the hierarchical organization of self-assembling peptide amphiphiles into supramolecular nanostructures opens up the possibility of developing biocompatible functional supramolecular materials for various applications. In this study, we show that the hierarchical self-assembly of histidine- (His-) functionalized PAs containing d- or l-amino acids can be controlled by both solution pH and molecular chirality of the building blocks. An increase in solution pH resulted in the structural transition of the His-functionalized chiral PA assemblies from nanosheets to completely closed nanotubes through an enhanced hydrogen-bonding capacity and π-π stacking of imidazole ring. The effects of the stereochemistry and amino acid sequence of the PA backbone on the supramolecular organization were also analyzed by CD, TEM, SAXS, and molecular dynamics simulations. In addition, an investigation of chiral mixtures revealed the differences between the hydrogen-bonding capacities and noncovalent interactions of PAs with d- and l-amino acids.