Bromine radical release from a nickel-complex facilitates the activation of alkyl boronic acids: a boron selective Suzuki-Miyaura cross coupling

In this study, without utilizing any exogenous activator or strong oxidants, we successfully employed inactivated and easily accessible alkyl boronic acids (BAs) as coupling partners in a photocatalyzed Suzuki-Miyaura reaction under batch and continuous-flow conditions. Detailed mechanistic studies suggest a unique BA activation pathway, via a plausible radical transfer event between a bromine radical (formed in situ via a photo-induced homolysis of the Ni-Br bond) and the empty p-orbital on the boron atom. Subsequently, the necessity to tune the BA oxidation potential by means of hydrogen-bonding interaction with solvents or Lewis acid-base type interactions is replaced by a novel halogen radical transfer (XRT) mechanism. The mechanistic hypothesis has been supported by both control experiments and DFT calculations.

BODIPYs α-appended with distyryl-linked aryl bisboronic acids: single-step cell staining and turn-on fluorescence binding with D-glucose

Small-molecule sensors that are selective for particular sugars are rare. The synthesis of BODIPYs appended with two boronic acid units is reported, alongside cellular staining/labelling and turn-on fluorescence binding data for carbohydrates. The structural frameworks were designed using computational methods, leaning on the chelation characteristics of bis(boronic acids) and the photophysical properties of BODIPYs. Selective binding to glucose is demonstrated via emission and absorption methods, and the challenges of using NMR data for studying carbohydrate binding are discussed. Furthermore, crystal structures, cell permeability and imaging properties of the BODIPYs appended with two boronic acid units are described. This work presents boronic-acid-appended BODIPYs as a potential framework for tunable carbohydrate sensing and chemical biology staining.

19F NMR Probes: Molecular Logic Material Implications for the Anion Discrimination and Chemodosimetric Approach for Selective Detection of H2O2

Detection and discrimination of similar solvation energies of bioanalytes are vital in medical and practical applications. Currently, various advanced techniques are equipped to recognize these crucial bioanalytes. Each strategy has its own benefits and limitations. One-dimensional response, lack of discrimination power for anions, and reactive oxygen species (ROS) generally limit the utilized fluorescent probe. Therefore, a cutting-edge, refined method is expected to conquer these limitations. The use of 19F NMR spectroscopy for detecting and discriminating essential analytes in practical applications is an emerging technique. As an alternative strategy, we report two fluorinated boronic acid-appended pyridinium salts 5-F-o-BBBpy (1) and 5-CF3-o-BBBpy (2). Probe (1) acts as a chemosensor for identifying and discriminating inorganic anions with similar solvation energies with strong bidirectional 19F shifts in the lower ppm range. Probe (2) turns as a chemo dosimeter for the selective detection and precise quantification of hydrogen peroxide (H2O2) among other competing ROS. To demonstrate real-life applicability, we successfully quantified H2O2 via probe (2) in different pharmaceutical, dental, and cosmetic samples. We found that tuning the -F/-CF3 moiety to the arene boronic acid enables the π-conjugation, a crucial prerequisite for the discrimination of anions and H2O2. Characteristic 19F NMR fingerprints in the presence of anions revealed a complementary implication (IMP)/not implication (NIMP) logic function. Finally, the 16 distinct binary Boolean operations on two logic values are defined for "functional completeness" using the special property of the IMP gate. Boolean logic's ability to handle information by utilizing characteristic 19F NMR fingerprints has not been seen previously in a single chemical platform for detecting and differentiating such anions.

CdSe/ZnS Quantum Rods (QRs) and Phenyl Boronic Acid BODIPY as Efficient Förster Resonance Energy Transfer (FRET) Donor-Acceptor Pair

The reversibility of the covalent interaction between boronic acids and 1,2- or 1,3-diols has put the spotlight on this reaction for its potential in the development of sensors and for the fishing of bioactive glycoconjugates. In this work, we describe the investigation of this reaction for the reversible functionalization of the surface of CdSe/ZnS Quantum Rods (QRs). With this in mind, we have designed a turn-off Förster resonance energy transfer (FRET) system that ensures monitoring the extent of the reaction between the phenyl boronic residue at the meso position of a BODIPY probe and the solvent-exposed 1,2-diols on QRs' surface. The reversibility of the corresponding boronate ester under oxidant conditions has also been assessed, thus envisioning the potential sensing ability of this system.

Advancing Glucose Sensing Through Auto-Fluorescent Polymer Brushes: From Surface Design to Nano-Arrays

Designing smart (bio)interfaces with the capability to sense and react to changes in local environments offers intriguing possibilities for new surface-based sensing devices and technologies. Polymer brushes make ideal materials to design such adaptive and responsive interfaces given their large variety of functional and structural possibilities as well as their outstanding abilities to respond to physical, chemical, and biological stimuli. Herein, a practical sensory interface for glucose detection based on auto-fluorescent polymer brushes decorated with phenylboronic acid (PBA) receptors is presented. The glucose-responsive luminescent surfaces, which are capable of translating conformational transitions triggered by pH variations and binding events into fluorescent readouts without the need for fluorescent dyes, are grown from both nanopatterned and non-patterned substrates. Two-photon laser scanning confocal microscopy and atomic force microscopy (AFM) analyses reveal the relationship between the brush conformation and glucose concentration and confirm that the phenylboronic acid functionalized brushes can bind glucose over a range of physiologically relevant concentrations in a reversible manner. The combination of auto-fluorescent polymer brushes with synthetic receptors presents a promising avenue for designing innovative and robust sensing systems, which are essential for various biomedical applications, among other uses.

Enantiomer Recognition Based on Chirality Transfer from Chiral Amines to Ternary Dynamic Covalent Systems

Enantiomer recognition is usually required in organic synthesis and materials and life sciences. This paper describes an enantiomer recognition method based on ternary dynamic covalent systems constructed via the complexation of chiral amines with a chiral boronate derived from 1,4-phenylenediboric acid and an L-DOPA-modified naphthalenediimide. The ternary systems aggregate into chiral assemblies driven by π-π interactions, and the chirality is transferred from the chiral amines to assemblies with high stereospecificity. Consequently, the enantiomer composition of chiral amines and the absolute configuration of the major enantiomer can be determined according to the sign of the Cotton effect of the ternary system by using circular dichroism (CD) spectroscopy. This method offers the advantage of using the long wavelength CD signals of the boronate at around 520 nm, thereby avoiding interference with those of the carbon skeleton. This ternary system provides a novel approach to the design of enantiomer recognition systems.

Stimuli-Responsive Boronate Formation to Control Nucleic Acid-Based Functional Architectures

Boronate esters, formed by the reaction of an oligonucleotide bearing a 5'-boronic acid moiety with the 3'-terminal cis-diol of another oligonucleotide, support the assembly of functional nucleic acid architectures. Reversible formation of boronate esters occurs in templated fashion and has been shown to restore the activity of split DNA and RNA enzymes as well as a split fluorescent light-up aptamer. Apart from their suitability for the design and application of split nucleic acid enzymes and aptamers in the field of biosensing, boronate esters may have played an important role in early life as surrogates of the natural phosphodiester bond. Their formation is reversible and thus fulfills an important requirement for biological self-assembly. Here we discuss the general concept of stimuli-dependent boronate formation and its application in biomolecules with implications for future research.

Water-soluble fluorescent chemosensor for sorbitol based on a dicationic diboronic receptor. Crystal structure and spectroscopic studies

Selective recognition of saccharides by phenylboronic dyes capable of functioning in aqueous conditions is a central topic of modern supramolecular chemistry that impacts analytical sciences and biological chemistry. Herein, a new dicationic diboronic acid structure 11 was synthesized, structurally described by single-crystal X-ray diffraction, and studied in-depth as fluorescent receptor for six saccharides in pure water at pH = 7.4. This dicationic receptor 11 has been designed particularly to respond to sorbitol and involves two convergent and strongly acidified phenyl boronic acids, with a pKa of 6.6, that operate as binding sites. The addition of sorbitol in the micromolar concentration range to receptor 11 induces strong fluorescence change, but in the presence of fructose, mannitol, glucose, lactose and sucrose, only moderate optical changes are observed. This change in emission is attributed to a static complexation photoinduced electron transfer mechanism as evidenced by lifetime experiments and different spectroscopic tools. The diboronic receptor has a high affinity/selectivity to sorbitol (K = 31 800 M-1) over other saccharides including common interfering species such as mannitol and fructose. The results based on 1H, 11B NMR spectroscopy, high-resolution mass spectrometry and density functional theory calculations, support that sorbitol is efficiently bound to 11 in a 1 : 1 mode involving a chelating diboronate-sorbitol complexation. Since the experimental B⋯B distance (5.3 Å) in 11 is very close to the calculated distance from the DFT-optimized complex with sorbitol, the efficient binding is attributed to strong acidification and preorganization of boronic acids. These results highlight the usefulness of a new diboronic acid receptor with a strong ability for fluorescent recognition of sorbitol in physiological conditions.

Electrochemical detection of glycoproteins using boronic acid-modified metal-organic frameworks as dual-functional signal reporters

The sensitive analysis of glycoproteins is of great importance for early diagnosis and prognosis of diseases. In this work, a sandwich-type electrochemical aptasensor was developed for the detection of glycoproteins using 4-formylphenylboric acid (FPBA)-modified Cu-based metal-organic frameworks (FPBA-Cu-MOFs) as dual-functional signal probes. The target captured by the aptamer-modified electrode allowed the attachment of FPBA-Cu-MOFs based on the interaction between boronic acid and glycan on glycoproteins. Large numbers of Cu2+ ions in FPBA-Cu-MOFs produced an amplified signal for the direct voltammetric detection of glycoproteins. The electrochemical aptasensor showed a detection limit as low as 6.5 pg mL-1 for prostate specific antigen detection. The method obviates the use of antibody and enzymes for molecular recognition and signal output. The dual-functional MOFs can be extended to the design of other biosensors for the determination of diol-containing biomolecules in clinical diagnosis.

Biosensors with Boronic Acid-Based Materials as the Recognition Elements and Signal Labels

It is of great importance to have sensitive and accurate detection of cis-diol-containing biologically related substances because of their important functions in the research fields of metabolomics, glycomics, and proteomics. Boronic acids can specifically and reversibly interact with 1,2- or 1,3-diols to form five or six cyclic esters. Based on this unique property, boronic acid-based materials have been used as synthetic receptors for the specific recognition and detection of cis-diol-containing species. This review critically summarizes the recent advances with boronic acid-based materials as recognition elements and signal labels for the detection of cis-diol-containing biological species, including ribonucleic acids, glycans, glycoproteins, bacteria, exosomes, and tumor cells. We also address the challenges and future perspectives for developing versatile boronic acid-based materials with various promising applications.

Alternative boronic acids in the detection of Mycolactone A/B using the thin layer chromatography (f-TLC) method for diagnosis of Buruli ulcer

BACKGROUND

Mycobacterium ulcerans is the causative agent of Buruli ulcer. The pathology of M. ulcerans disease has been attributed to the secretion of a potent macrolide cytotoxin known as mycolactone which plays an important role in the virulence of the disease. Mycolactone is a biomarker for the diagnosis of BU that can be detected using the fluorescent-thin layer chromatography (f-TLC) technique. The technique relies on the chemical derivatization of mycolactone A/B with 2-naphthylboronic acid (BA) which acts as a fluorogenic chemosensor. However, background interferences due to co-extracted human tissue lipids, especially with clinical samples coupled with the subjectivity of the method call for an investigation to find an alternative to BA.

METHODS

Twenty-six commercially available arylboronic acids were initially screened as alternatives to BA using the f-TLC experiment. UV-vis measurements were also conducted to determine the absorption maximum spectra of mycolactone A/B and myco-boronic acid adducts followed by an investigation of the fluorescence-enhancing ability of the boronate ester formation between mycolactone A/B and our three most promising boronic acids (BA15, BA18, and BA21). LC-MS technique was employed to confirm the adduct formation between mycolactone and boronic acids. Furthermore, a comparative study was conducted between BA18 and BA using 6 Polymerase Chain Reaction (PCR) confirmed BU patient samples.

RESULTS

Three of the boronic acids (BA15, BA18, and BA21) produced fluorescent band intensities superior to BA. Complexation studies conducted on thin layer chromatography (TLC) using 0.1 M solution of the three boronic acids and various volumes of 10 ng/µL of synthetic mycolactone ranging from 1 µL - 9 µL corresponding to 10 ng - 90 ng gave similar results with myco-BA18 adduct emerging with the most visibly intense fluorescence bands. UV-vis absorption maxima (λ_max) for the free mycolactone A/B was observed at 362 nm, and the values for the adducts myco-BA15, myco-BA18, and myco-BA21 were at 272 nm, 270 nm, and 286 nm respectively. The comparable experimental λ_max of 362 nm for mycolactone A/B to the calculated Woodward-Fieser value of 367 nm for the fatty acid side chain of mycolactone A/B demonstrate that even though 2 cyclic boronates were formed, only the boronate of the southern side chain with the chromophore was excited by irradiation at 365 nm. Fluorescence experiments have demonstrated that coupling BA18 to mycolactone A/B along the 1,3-diols remarkably enhanced the fluorescence intensity at 537 nm. High-Resolution Mass Spectrometer (HR-MS) was used to confirm the formation of the myco-BA15 adduct. Finally, f-TLC analysis of patient samples with BA18 gave improved BA18-adduct intensities compared to the original BA-adduct.

CONCLUSION

Twenty-six commercially available boronic acids were investigated as alternatives to BA, used in the f-TLC analysis for the diagnosis of BU. Three (3) of them BA15, BA18, and BA21 gave superior fluorescence band intensity profiles. They gave profiles that were easier to interpret after the myco-boronic acid adduct formation and in experiments with clinical samples from patients with BA18 the best. BA18, therefore, has been identified as a potential alternative to BA and could provide a solution to the challenge of background interference of co-extracted human tissue lipids from clinical samples currently associated with the use of BA.

Enlightening the Path to Protein Engineering: Chemoselective Turn-On Probes for High-Throughput Screening of Enzymatic Activity

Many successful stories in enzyme engineering are based on the creation of randomized diversity in large mutant libraries, containing millions to billions of enzyme variants. Methods that enabled their evaluation with high throughput are dominated by spectroscopic techniques due to their high speed and sensitivity. A large proportion of studies relies on fluorogenic substrates that mimic the chemical properties of the target or coupled enzymatic assays with an optical read-out that assesses the desired catalytic efficiency indirectly. The most reliable hits, however, are achieved by screening for conversions of the starting material to the desired product. For this purpose, functional group assays offer a general approach to achieve a fast, optical read-out. They use the chemoselectivity, differences in electronic and steric properties of various functional groups, to reduce the number of false-positive results and the analytical noise stemming from enzymatic background activities. This review summarizes the developments and use of functional group probes for chemoselective derivatizations, with a clear focus on screening for enzymatic activity in protein engineering.

Fluorescence Sensing of Monosaccharides by Bis-boronic Acids Derived from Quinolinium Dicarboxamides: Structural and Spectroscopic Studies

Three new diboronic acid-substituted bisquinolinium salts were synthesized, structurally described by single-crystal X-ray diffraction, and studied in-depth as fluorescent receptors for six monosaccharides and two open-chain polyols in water at physiological pH. The dicationic pyridine-2,6-dicarboxamide-based receptors contain two N-quinolinium rings as the fluorescent units covalently linked to three different isomers of phenylboronic acid (ortho, 2; meta, 3; and para, 4) as chelating binding sites for polyols. Additions of glucose/fructose in the micromolar concentration range to receptors 2 and 3 induce significant fluorescence changes, but in the presence of arabinose, galactose, mannose, and xylose, only modest optical changes are observed. This optical change is attributed to a static photoinduced electron transfer mechanism. The meta-diboronic receptor 3 exhibited a high affinity/selectivity toward glucose (K = 3800 M^-1) over other monosaccharides including common interfering species such as fructose and mannitol. Based on multiple spectroscopic tools, electrospray ionization high-resolution mass spectrometry, crystal structures, and density functional theory calculations, the binding mode between 3 and glucose is proposed as a 1:1 complex with the glucofuranose form involving a cooperative chelating diboronate binding. These results demonstrate the usefulness of a new set of cationic fluorescent diboronic acid receptors with a strong ability for optical recognition of glucose in the sub-millimolar concentration range.

Marcus model-based analysis of the photo-quenching mechanism of a boronic acid fluorophore: water concentration dependence of electron transfer rate

The photo-quenching mechanism of 2-(4-phenylboronic acid)-1-pyrenemethamide (C1-APB), which has potential application as a saccharide-recognition sensor, was investigated. By performing temperature-dependent time-resolved photoluminescence measurements, we determined the mechanism responsible for the photo-quenching properties of C1-APB to be a photoinduced electron transfer (PET). Moreover, the dependence of the electron transfer rate (k_PET) on the solvent water concentration was explored in detail, and it was found that k_PET increased by many orders of magnitude with increasing water concentrations. This phenomenon was analyzed using the Marcus model, in which the electron transfer can be represented by a potential diagram involving the potential barrier (ΔG_a) and frequency factor (A). With the aid of temperature-dependent measurements, the contribution of ΔG_a and A to the increase in k_PET was successfully analyzed independently, which allowed us to discuss the effect of water molecule orientation and change in molecular structure of C1-APB. The temperature-dependence measurements performed in this study offer a powerful research tool for investigating the PET process, and will contribute to the development of molecular recognition fluorescent sensors.

MIL-53 and its OH-bonded variants for bio-polyol adsorption from aqueous solution

The adsorption of bio-polyols from dilute aqueous solution is important but faces challenges in the sustainable bio-refinery process. One solution to increase adsorption efficiency is to leverage host–guest interactions between the polyols and materials to grant a preference for polyols. In this study, we synthesized MIL-53 and diverse OH-bonded variants, and studied their adsorption properties towards ethanediol, 1,3-propanediol and glycerol in water. Among the four materials, OH–MIL-53 exhibited fast adsorption kinetics and high capacity, and could be completely regenerated through ethanol elution. Hydrophobic interactions between the alkyl chains of the polyols and the organic linkers of OH–MIL-53 and hydrogen bonding interactions between their OH groups were identified. The synergistic effect of the host–guest interactions is responsible for the unique adsorption performances of OH–MIL-53 towards polyols, and particularly for 1,3-propanediol.

Delicate host–guest interaction drives OH-bonded MOF to capture bio-polyols from diluted aqueous solution, with high capacity, fast kinetics and recyclability.

Anion Recognition by Benzoxaborole

The binding types (H-bonding or coordinate) and stability constants for complexes of 11 mono- and di-anions with benzoxaborole (1) were determined by ¹H and ¹¹B NMR titrations in DMSO or MeCN. Compared to phenylboronic acid (PBA), 1 is a stronger Lewis acid and a poorer H-bond donor with only one B-OH group, which is expected therefore to recognize anions mostly through the coordinate bonding. This is the case however only with F^-, HPO₄^2-, and PhPO₃^2- anions, which are coordinately bonded to 1, and partially with SO₄^2-, which forms only the H-bonded complex with PBA, but both H-bonded and coordinate complexes with 1. The majority of tested anions (AcO^-, PhPO₃H^-, (PhO)₂PO₂^-, Cl^-, and Br^-) form H-bonded complexes with both 1 and PBA, whereas H₂PO₄^- changes the binding mode from coordinate for PBA to H-bonded for 1. The preferable binding type for each anion is confirmed by calculations of DFT-optimized structures of the anion complexes of 1. The preferable binding type can be rationalized considering the effects of the steric hindrance, more significant for the coordinate bonding, and of increased anion basicity, which is favorable for both binding types, but enhances the strength of coordinate bonding more significantly than the strength of H-bonding.

Hydrogen Peroxide-Triggered Conversion of Boronic Acid-Appended Insulin into Insulin and Its Application as a Glucose-Responsive Insulin Formulation

p-Boronophenylmethoxycarbonyl (BPmoc) is a protecting group for amines that is removable by treatment with hydrogen peroxide (H₂O₂). We prepared BPmoc-modified insulin (BPmoc-Ins) and subcutaneously injected the formulation into diabetic rats. The results demonstrated that BPmoc effectively sealed the blood glucose (Glc)-lowering effects of Ins. Conversely, coinjection of BPmoc-Ins and Glc oxidase (GOx) resulted in reduced blood Glc levels, indicating that Ins was generated from BPmoc-Ins through the following reactions: oxidation of endogenous Glc by GOx; production of H₂O₂ accompanied by Glc oxidation; removal of BPmoc residues by H₂O₂. These results show the potential of BPmoc-Ins for a Glc-responsive Ins release system.

Protodeboronation of (Hetero)Arylboronic Esters: Direct versus Prehydrolytic Pathways and Self-/Auto-Catalysis

The kinetics and mechanism of the base-catalyzed hydrolysis (ArB(OR)₂ → ArB(OH)₂) and protodeboronation (ArB(OR)₂ → ArH) of a series of boronic esters, encompassing eight different polyols and 10 polyfluoroaryl and heteroaryl moieties, have been investigated by in situ and stopped-flow NMR spectroscopy (¹⁹F, ¹H, and ¹¹B), pH-rate dependence, isotope entrainment, ²H KIEs, and KS-DFT computations. The study reveals the phenomenological stability of boronic esters under basic aqueous-organic conditions to be highly nuanced. In contrast to common assumption, esterification does not necessarily impart greater stability compared to the corresponding boronic acid. Moreover, hydrolysis of the ester to the boronic acid can be a dominant component of the overall protodeboronation process, augmented by self-, auto-, and oxidative (phenolic) catalysis when the pH is close to the pK_a of the boronic acid/ester.

Surface Engineered PLGA Nanoparticle for Threshold Responsive Glucose Monitoring and "Self-Programmed" Insulin Delivery

We have developed a reversible, biocompatible, "self-programmed" PLGA [poly(lactic-co-glycolic acid)] nanoparticle-based optical biosensor capable of sensing and continuous monitoring of glucose above the physiologically relevant threshold value (100-125 mg/dL) as well as "on-demand" insulin delivery via an "On-Off" technique. We have carefully surface engineered the PLGA nanoparticle using amino dextran-fluorescein (A-DexFl) and amino-phenyl boronic acid (A-PBA) to exploit the binding affinity of boronic acids with that of cis-1,2 diols of dextran/glucose. Initially, the dextran chains wrap the nanoparticle surface due to its high affinity toward A-PBA (K_b = 6.1 × 10⁶ M^-1). The close proximity of the fluorophores with that of A-PBA quenches the fluorescence, resulting in an "Off" state. On the addition of glucose, it competes with A-DexFl to bind with A-PBA. Above a certain threshold concentration of glucose, the binding affinity overcomes (K_b = 6.3 × 10⁷ M^-1) the dextran-A-PBA binding. This opens-up the wrapped A-DexFl chains from the nanoparticle surface and results in an increased distance between the fluorophore and A-PBA, triggering the "On" state. The activation of the On-Off state can be finely tuned in the desired range of physiologically relevant glucose concentrations by varying the ligand ratios on the PLGA surface. The nanoparticle core has also been used as an insulin reservoir to trigger the drug release in the "On" state. We have obtained ∼53% encapsulation efficiency and ∼20% loading efficiency for insulin loading. Once the glucose concentration falls beyond the detection range, the dextran chains collapse on the nanoparticle surface with a suspension in drug release. The process is solely controlled by the competition and multivalent binding affinity between glucose, A-DexFl, and A-PBA, which allows it to be "self-programmed" and "self-regulated" with continuous monitoring up to 8-10 cycles over a 72 h time period. A sustained drug release has been found with ∼70% of released drug over a period of 72 h, although this release is insignificant in the absence of glucose. Several control experiments have been performed to optimize the sensor design.

Dithiane Based Boronic Acid as a Carbohydrate Sensor in an Aqueous Solution at pH 7.5: Theoretical and Experimental Approach

Carbohydrate sensing in an aqueous solution remains a very challenging area of interest. Using the idea of covalent reversible interaction between boronic acids and the diol groups in carbohydrates enable us to design a carbohydrate sensor 1-thianthrenylboronic acid (1T), which has high selectivity towards fructose. To elucidate the sensing and binding properties of 1T with sugars, we have incorporated theoretical (DFT and TD-DFT) and spectroscopic techniques. For an optimized geometry, the complete vibrational assignments were done with FT-IR and FT-Raman spectra. Physiochemical parameters were obtained by implementing frontier molecular orbital (FMO) analysis. Further, excited state properties were determined by performing TD-DFT calculations in solvent and these properties were in good agreement with the experiment. The steady state fluorescence measurements with varying concentration of sugars, revealed that the fluorescence intensity of boronic acid is enhanced by studied sugars due to the structural modification. We also noticed remarkable changes in fluorescence lifetimes and quantum yield after adding sugars. The article also reports influence of pH on boronic acid's fluorescence intensity with and without sugars. The fluorescence of boronic acid increases with the increase in pH. These changes are due to acid-base equilibrium of boronic acid and led us to estimate the pKa value of 7.6. All the theoretical and experimental evidences suggested that 1T can be used as a possible fluorescent sensor for fructose. In addition, 1T showed very good affinity for Cu²⁺ ion with K_a = 150 × 10² M^-1, which suggests that 1T can also be used as a chemosensor for Cu²⁺ ions.

Synthesis of Fluorinated Aminoalkylboronic Acids from Amphoteric α-Boryl Aldehydes

Our ongoing search for underdeveloped functional group combinations has brought to light α-fluorinated aminoalkylboronic acids, a new class of molecules featuring the B-CF linkage. These compounds can now be generated from secondary amines and α-boryl aldehydes through electrophilic fluorination of boryl enamines or enamides. Fluorinated β-aminoalkylboronic acids show no signs of degradation under ambient conditions. We present evidence for the involvement of chair-like motifs, favored over the acyclic forms by up to 1.7±0.1 kcal mol^-1 in water and held together by an amine-boronate hydrogen bond. Fluorinated β-aminoalkylboronic acids are stable over a wide pH range and are characterized by a pK_a of 3.4, which is the lowest of any alkylboronic acid.

Effect of Spacer Length in Pyrene-Modified-Phenylboronic Acid Probe/CyD Complexes on Fluorescence-based Recognition of Monosaccharides in Aqueous Solution

The chemical sensing of saccharides is of importance for the diagnosis of diabetes. Various enzymatic sensors have been developed, but their heat and pH instability issues need to be resolved. In this regard, the development of artificial saccharide sensors with high stability is attracting attention. We have designed a heat- and pH-stable supramolecular inclusion complex system composed of cyclodextrin (CyD) as a host and a phenylboronic acid (PB) probe possessing pyrene as a fluorescent guest. Several probes possessing alkyl spacers having various lengths between the PB and the pyrene moiety, Cn-APB (n = 1 - 4), were newly synthesized and evaluated with respect to their monosaccharide recognition ability on the basis of the fluorescence response through the cyclic esterification of monosaccharide and PB. These Cn-APB/CyD supramolecular inclusion complexes have exhibited a selective fluorescence response towards fructose in aqueous solution based on the photo-induced electron transfer mechanism. The spacer length of the alkyl group in Cn-APB significantly affects the affinity for saccharides. With respect to the complex between C4-APB and PB-modified CyD (3-PB-γ-CyD), it was found that the supramolecular inclusion complexes had high selectivity for glucose with significant fluorescence enhancement. These results indicate that the lengths of the alkyl spacers in the probe molecules are important to control the recognition of saccharides in aqueous solution.

Boronate-appended polymers with diol-functionalized ferrocene: an effective and selective method for voltammetric glucose sensing

In this research, three types of poly(amidoamine) dendrimers doped with a phenylboronic derivative at different ratios of -B(OH)₂ groups to amino groups (-NH₂) and one polyethyleneimine (PEI) polymer doped with a phenylboronic acid derivative were used as molecular receptors. The voltammetric glucose detection was based on the difference in the affinity of the tested systems in relation to 2-((ferrocenylmethyl)amino)propane-1,3-diol (Fc-1,3-diol) and glucose. Polymeric phenylboronic compounds were introduced to the electrode surface through an electrodeposition process at a constant potential. The obtained calibration curves were characterized by a wide range of linearity (0.005-100 μM) and low values of the limit of detection reaching even 0.0012 μM. Moreover, the influence of interferents (ascorbic acid, uric acid and fructose) was investigated at two different concentrations. Only fructose had a significant influence on the oxidation signal of ferrocene units, but solely in the case of R-Ph-B(OH)₂ (where R = PEI or PAMAM; Ph - phenyl ring) systems with a low content of boron groups, and these systems form complexes with glucose in a stoichiometric ratio of 1 : 1. The reliability of the results was confirmed by determining the percentage of recovery (added glucose vs. labeled glucose). Most of the results met the acceptance criteria (95%-105%), allowing the developed electrochemical sensors to be successfully used for the analysis of real-life samples.

Anion recognition by anthracene appended ortho-aminomethylphenylboronic acid: a new PET-based sensing mechanism

Carboxylate, phosphate and sulphate anions form hydrogen bonded complexes with the B(OH)2 group of the receptor 1 producing a turn-off fluorescence response, while the malonate monoanion induces the opposite turn-on effect.

H2O2/HOCl-based fluorescent probes for dynamically monitoring pathophysiological processes

Serving as representative reactive oxygen species (ROS), H2O2 and HOCl play crucial roles in biological metabolism and intercellular oxidation-reduction dynamic equilibrium. The overexpression of H2O2/HOCl may cause a variety of diseases, such as acute and chronic inflammation, cancer and neurodegenerative disorders. A major question in H2O2/HOCl-based pathological diagnosis is knowing how H2O2/HOCl concentrations can be accurately regulated to initiate a diagnosis and subsequently guarantee therapeutic effects in the course of medical advances. Fluorescent probes, with their great spatial and temporal resolutions, have been used in diverse pathophysiological processes and developed rapidly in the last five years. We summarise in this review the optical properties of H2O2/HOCl-responsive fluorescent probes and focus on effective distribution and dynamic monitoring by using pathophysiological models.

Balancing interactions in proline-based receptors for chiral recognition of l-/d-DOPA

Proline based receptors (1-14) attached with phenylboronic acid and benzaldehyde binding groups at the N-/C- or C-/N-termini of the proline residue were created for chiral recognition of l-/d-DOPA, in an attempt to examine if balancing the two binding events would influence the recognition. By changing the positions of boronic acid and aldehyde groups substituted on the phenyl rings (1-4, 5-8) and the site at which phenylboronic acid and benzaldehyde moieties attached respectively to the N- and C-termini or C- and N-termini of the proline residue (1-4vs.5-8), and by introducing an electron-withdrawing fluorine atom in the phenyl ring of the weaker binder the benzaldehyde moiety (11vs.1, 14vs.5), we were able to show that a better balance of the two binding events does improve the chiral recognition. This finding can only be made with the current version of receptors that were equipped with two different binding groups. Together with the finding that the chiral recognition performance in mixed organic-aqueous solutions is tunable by varying the solvent composition, we have now arrived at a protocol for designing proline based receptors for extended applications in chiral recognition.

Fluorescence Anion Chemosensor Array Based on Pyrenylboronic Acid

A novel fluorescence chemosensor array composed of pyrenylboronic acid-based probes for multi- anion detection has been developed. The pyrenylboronic acid derivatives showed fluorescence quenching or enhancement due to photoinduced electron transfer originating from anion binding. The recognition ability was assessed by fluorescence titrations and electrospray ionization mass spectrometry. Because the array is constructed with cross-reactive probes, the combination of differential binding affinities for anions (i.e., fluoride, acetate, oxalate, malonate, citrate, dihydrogen phosphate, and pyrophosphate) and pattern recognitions, such as linear discriminant analysis, offered a successful simultaneous anion detection with a classification rate of 100%. Furthermore, the chemosensor array allowed for quantitative prediction of oxalate, malonate, and citrate in mixtures using a support vector machine. Importantly, the array system employs low-cost and commercially available reagents as probes. Thus, this study could lead to the development of user-friendly and high-throughput methods to detect a variety of analytes in complicated systems.

Boronic acid sensors with double recognition sites: a review

Boronic acids reversibly and covalently bind to Lewis bases and polyols, which facilitated the development of a large number of chemical sensors to recognize carbohydrates, catecholamines, ions, hydrogen peroxide, and so on. However, as the binding mechanism of boronic acids and analytes is not very clear, it is still a challenge to discover sensors with high affinity and selectivity. In this review, boronic acid sensors with two recognition sites, including diboronic acid sensors, and monoboronic acid sensors having another group or binding moiety, are summarized. Owing to double recognition sites working synergistically, the binding affinity and selectivity of sensors can be improved significantly. This review may help researchers to sort out the binding rules and develop ideal boronic acid-based sensors.

Shedding light on the mitochondrial matrix through a functional membrane transporter

The first fluorescent probes that are actively channeled into the mitochondrial matrix by a specific mitochondrial membrane transporter in living cells have been developed. The new functional probes (BCT) have a minimalist structural design based on the highly efficient and photostable BODIPY chromophore and carnitine as a biotargeting element. Both units are orthogonally bonded through the common boron atom, thus avoiding the use of complex polyatomic connectors. In contrast to known mitochondria-specific dyes, BCTs selectively label these organelles regardless of their transmembrane potential and in an enantioselective way. The obtained experimental evidence supports carnitine–acylcarnitine translocase (CACT) as the key transporter protein for BCTs, which behave therefore as acylcarnitine biomimetics. This simple structural design can be readily extended to other structurally diverse starting F-BODIPYs to obtain BCTs with varied emission wavelengths along the visible and NIR spectral regions and with multifunctional capabilities. BCTs are the first fluorescent derivatives of carnitine to be used in cell microscopy and stand as promising research tools to explore the role of the carnitine shuttle system in cancer and metabolic diseases. Extension of this approach to other small-molecule mitochondrial transporters is envisaged.

A BODIPY derivative of carnitine enters mitochondria regardless of their membrane potential and in an enantioselective way through a specific mitochondrial membrane transporter in living cells.

Selective Sugar Recognition by Anthracene-Type Boronic Acid Fluorophore/Cyclodextrin Supramolecular Complex Under Physiological pH Condition

We synthesized novel PET (photoinduced electron transfer)-type fluorescence glucose probe 1 [(4-(anthracen-2-yl-carbamoyl)-3-fluorophenyl)boronic acid], which has a phenylboronic acid (PBA) moiety as the recognition site and anthracene as the fluorescent part. Although the PBA derivatives dissociate and bind with sugar in the basic condition, our new fluorescent probe can recognize sugars in the physiological pH by introducing an electron-withdrawing fluorine group into the PBA moiety. As a result, the pK _a value of this fluorescent probe was lowered and the probe was able to recognize sugars at the physiological pH of 7.4. The sensor was found to produce two types of fluorescent signals, monomer fluorescence and dimer fluorescence, by forming a supramolecular 2:1 complex of 1 with glucose inside a γ-cyclodextrin (γ-CyD) cavity. Selective ratiometric sensing of glucose by the 1/γ-CyD complex was achieved in water at physiological pH.

Reusable Silicon-Based SERS Chip for Ratiometric Analysis of Fluoride Ion in Aqueous Solutions

An innovative ratiometric surface-enhanced Raman scattering (SERS) sensor using a 4-mercaptoboric acid (4-MPBA)-modified silver nanoparticle-decorated silicon wafer (Si@Ag NPs chip) was proposed for the ultrasensitive determination of F^- ions in aqueous solutions. The principle of sensing strategy is based on fluoride-induced structural symmetry breaking and charge redistribution of phenylboronic acid, leading to a band shift of the C-C stretching mode of 4-MPBA from 1589 to 1576 cm^-1. Accordingly, a ratiometric signal of the area ratio (A₁₅₇₆/A₁₅₈₉) between the fluoride-bond MPBA molecules and unoccupied MPBA molecules can be used for the quantitative response of F^- ions. In comparison with other SERS-based sensing methods, this ratiometric method can avoid a large error resulting from the inhomogeneity of substrates. Under the optimized analytical conditions, the proposed SERS sensor possesses a quick response to F^- ions within 2 min and exhibits high selectivity for F^- ions with the determination limit of 10^-8 M, which is over 3 orders of magnitude lower than the World Health Organization (WHO) guideline value for F^- ions in drinking water. Of particular significance, the present sensor features favorable recyclability, which preserves suitable reproducibility during 6-time cyclic determination of F^- ions. The practical utility of this sensing system for the determination of F^- ions was tested with real water and toothpaste samples, and the results demonstrate that this sensor shows high recoveries (90-110%). Given its simple principle and easy operation, the present silicon-based SERS sensor could serve as a promising sensor for various practical applications.

Cell Adhesive Character of Phenylboronic Acid-Modified Insulin and Its Potential as Long-Acting Insulin

Phenylboronic acid (PBA) derivatives have attracted substantial attention owing to their unique character of forming dynamic covalent bonds with polyol compounds. Recent studies have shown interactions between PBA and sugar chains on the cell surface; they have interesting applications for sensors and drug delivery systems. In this study, we prepared phenylboronic acid-modified insulin (PBA-Ins) to evaluate its glucose-lowering activity and cell adhesiveness. In the case of intravenous injection, PBA-Ins showed longer glucose-lowering activity than native insulin. We hypothesized that this prolonged effect was the result of the interaction between the PBA moiety and sugar chains on the cell surface. Red blood cells (RBCs) were used as a cell model, and we confirmed PBA-Ins's affinity for RBCs, which induced RBC agglutination. Interestingly, using an alternative PBA-Ins administration route markedly changed its glucose-lowering activity. Unlike the intravenous injection of PBA-Ins, the subcutaneous injection showed a small effect on glucose level, which indicated that a small amount of PBA-Ins was absorbed into the bloodstream. This suggested the importance of investigating the interaction between the PBA moiety and many types of cells, such as adipocytes, in subcutaneous tissues.

Construction and Evaluation of a Self-Calibrating Multiresponse and Multifunctional Graphene Biosensor

Recently, many studies have been focused on the development of graphene-based biosensors. However, they rely on one type of signal and need to be calibrated by other techniques. In this study, a nonenzymatic graphene-based biosensor has been designed and constructed. Its ability to detect glucose and Escherichia coli by three different types of signals has been investigated. For its preparation, dopamine-functionalized polyethylene glycol and 2,5-thiophenediylbisboronic acid were conjugated onto the surface of graphene sheets by nitrene [2 + 1] cycloaddition and condensation reactions, respectively. Multivalent interactions between boronic acid segments and biosystems consequently increased the quantifiable fluorescence emission and UV absorption of dopamine segments. Additionally, changing the electrochemical behavior of the functionalized graphene sheets was possible and resulted in a measurable output signal. Conjugation of mannose onto the surface of the biosensor improved its magnitude of signals and specificity for sensing E. coli in a complex medium. The efficiency and accuracy of each signal was monitored by others, which resulted in a real-time self-calibrating biosensor. Taking advantage of the versatility of the three different indicators, including florescence, UV, and electrochemistry, the functionalized graphene sheets have been used as self-regulating biosensors to detect a variety of biosystems with a high accuracy and specificity in a short time.

Layered Double Hydroxides as Bifunctional Catalysts for the Aryl Borylation under Ligand-Free Conditions

Organic derivatives of boron, such as boronic esters and acids, are important precursors for a wide range of environmental, energy, and health applications. Several catalytic methods for their synthesis have been reported, even though with the use of toxic and structurally complex ligands. Herein, we demonstrate preliminary studies envisaging the synthesis of boronic esters from an inexpensive catalytic system based on Cu/Al layered double hydroxides (LDH) in the presence of Na2PdCl4. The Cu/ Al LDHs were prepared according to coprecipitation method and characterized by X-ray diffraction (XRD) (with Rietveld refinement) to evaluate the contamination with malachite and other phases. Preliminary catalytic results suggest that pure Cu/Al LDH has potential for the borylation of aryl iodides/ bromides in the absence of base. Indeed, a synergic effect between copper and palladium is possibly related to the catalytic efficiency.

Rapid and Selective Discrimination of Gram-Positive and Gram-Negative Bacteria by Boronic Acid-Modified Poly(amidoamine) Dendrimer

There is an urgent need to develop a rapid and selective method for the detection of bacteria because delayed diagnosis and the overuse of antibiotics have triggered drug resistance in bacteria. To this end, we prepared boronic acid-modified poly(amidoamine) generation 4 (B-PAMAM(G4)) dendrimer as cross-linking molecules that form aggregates with bacteria. Within 5 min of adding B-PAMAM(G4) dendrimer solution to a bacterial suspension, large aggregates were observed. Interestingly, the aggregate formation with various bacteria was pH-dependent. In basic pH, both Gram-positive and Gram-negative bacteria formed aggregates, but in neutral pH, only Gram-positive bacteria formed aggregates. We revealed that this bacteria-selective aggregation involved the bacterial surface recognition of the phenylboronic acid moiety of B-PAMAM(G4) dendrimer. In addition, we demonstrated that the spherical structure of B-PAMAM(G4) was one of the important factors for the formation of large aggregates. The aggregation was also observed in the presence of ≤10 mM fructose. B-PAMAM(G4) dendrimer is expected to be a powerful tool for the rapid and selective discrimination between Gram-positive and Gram-negative bacteria.

Covalent Grafting of BPin functions on Carbon Nanotubes and Chan-Lam-Evans Post-Functionalization

The chemical functionalization of carbon nanotubes is often a prerequisite prior to their use in various applications. The covalent grafting of 4,4,5,5-tetramethyl-1,3,2-dioxaborolane (BPin) functional groups directly on the surface of multi- and single-walled carbon nanotubes, activated by nucleophilic addition of nBuLi, was carried out. Thermogravimetric analysis (TGA) coupled with mass spectrometry, Raman spectroscopy, X-ray photoelectron spectroscopy (XPS) and time-of-flight secondary ions mass spectrometry (ToF-SIMS) confirmed the efficiency of this methodology and proved the integrity and covalent grafting of the BPin functional groups. These groups were further reacted with various nucleophiles in the presence of a copper(II) source in the conditions of the aerobic Chan-Lam-Evans coupling. The resulting materials were characterized by TGA, XPS and ToF-SIMS. This route is efficient, reliable and among the scarce reactions that enable the direct grafting of heteroatoms at carbonaceous material surfaces.

A straightforward synthesis of phenyl boronic acid (PBA) containing BODIPY dyes: new functional and modular fluorescent tools for the tethering of the glycan domain of antibodies

We report here on the efficient and straightforward synthesis of a series of modular and functional PBA-BODIPY dyes 1–4. They are an outstanding example of the efficient merge of the versatility of the 3,5-dichloro-BODIPY derivatives and the receptor-like ability of the PBA moiety. The potential bioanalytical applicability of these tools was assessed by measuring the binding to glycan chains of antibodies by a Quartz Crystal Microbalance (QCM).

PBA-BODIPY dyes as functional and modular fluorescent probes for the tethering of the glycan domain of mAbs.

Boronic acids as building blocks for the construction of therapeutically useful bioconjugates

This review summarizes boronic acid's contribution to the development of bioconjugates with a particular focus on the molecular mechanisms underlying its role in the construction and function of the bioconjugate, namely as a bioconjugation warhead, as a payload and as part of a bioconjugate linker.

Gold nanoparticle-mediated signal amplification of liquid crystal biosensors for dopamine

A new design was developed for detection of dopamine using a boronic acid based amphiphile at aqueous–liquid crystal interface. The detection was highly enhanced in presence of gold nanoparticles.

Recent development of boronic acid-based fluorescent sensors

As Lewis acids, boronic acids can bind with 1,2- or 1,3-diols in aqueous solution reversibly and covalently to form five or six cyclic esters, thus resulting in significant fluorescence changes. Based on this phenomenon, boronic acid compounds have been well developed as sensors to recognize carbohydrates or other substances. Several reviews in this area have been reported before, however, novel boronic acid-based fluorescent sensors have emerged in large numbers in recent years. This paper reviews new boron-based sensors from the last five years that can detect carbohydrates such as glucose, ribose and sialyl Lewis A/X, and other substances including catecholamines, reactive oxygen species, and ionic compounds. And emerging electrochemically related fluorescent sensors and functionalized boronic acid as new materials including nanoparticles, smart polymer gels, and quantum dots were also involved. By summarizing and discussing these newly developed sensors, we expect new inspiration in the design of boronic acid-based fluorescent sensors.

Label-Free Graphene Oxide-Based Surface Plasmon Resonance Immunosensor for the Quantification of Galectin-3, a Novel Cardiac Biomarker

We report the first optical biosensor for the novel and important cardiac biomarker, galectin-3 (Gal3), using the anti-Gal3 antibody as a biorecognition element and surface plasmon resonance (SPR) for transducing the bioaffinity event. The immunosensing platform was built at a thiolated Au surface modified by self-assembling four bilayers of poly(diallyldimethylammonium chloride) and graphene oxide (GO), followed by the covalent attachment of 3-aminephenylboronic acid (3ABA). The importance of GO, both as the anchoring point of the antibody and as a field enhancer for improving the biosensor sensitivity, was critically discussed. The advantages of using 3ABA to orientate the anti-Gal3 antibody through the selective link to the Fc region were also demonstrated. The new platform represents an interesting alternative for the label-free biosensing of Gal3 in the whole range of clinically relevant concentrations (linear range between 10.0 and 50.0 ng mL^-1, detection limit of 2.0 ng mL^-1) with successful application for Gal3 biosensing in enriched human serum samples.

Ground-State Charge-Density Distribution in a Crystal of the Luminescent ortho-Phenylenediboronic Acid Complex with 8-Hydroxyquinoline

This contribution is devoted to the first electron density studies of a luminescent oxyquinolinato boron complex in the solid state. ortho-Phenylenediboronic acid mixed with 8-hydroxyquinoline in dioxane forms high-quality single crystals via slow solvent evaporation, which allows successful high resolution data collection (sin θ/λ = 1.2 Å^-1) and charge density distribution modeling. Particular attention has been paid to the boron-oxygen fragment connecting the two parts of the complex, and to the solvent species exhibiting anharmonic thermal motion. The experiment and theory compared rather well in terms of atomic charges and volumes, except for the boron centers. Boron atoms, as expected, constitute the most electron-deficient species in the complex molecule, whereas the neighboring oxygen and carbon atoms are the most significantly negatively charged ones. This part of the molecule appears to be very much involved in the charge transfer occurring between the acid fragment and oxyquinoline moiety leading to the observed fluorescence, as supported by the time-dependent density functional theory (TDDFT) results and the generated transition density maps. TDDFT calculations indicated that p-type atomic orbitals contributing to the HOMO-1, HOMO, and LUMO play the major role in the lowest energy transitions, and enabled further comparison with the charge density features, which is discussed in details. Furthermore, the results confirmed the known fact the Q ligand character is most important for the spectroscopic properties of this class of complexes.