Smart composite scaffold to synchronize magnetic hyperthermia and chemotherapy for efficient breast cancer therapy

Combination of different therapies is an attractive approach for cancer therapy. However, it is a challenge to synchronize different therapies for maximization of therapeutic effects. In this work, a smart composite scaffold that could synchronize magnetic hyperthermia and chemotherapy was prepared by hybridization of magnetic Fe3O4 nanoparticles and doxorubicin (Dox)-loaded thermosensitive liposomes with biodegradable polymers. Irradiation of alternating magnetic field (AMF) could not only increase the scaffold temperature for magnetic hyperthermia but also trigger the release of Dox for chemotherapy. The two functions of magnetic hyperthermia and chemotherapy were synchronized by switching AMF on and off. The synergistic anticancer effects of the composite scaffold were confirmed by in vitro cell culture and in vivo animal experiments. The composite scaffold could efficiently eliminate breast cancer cells under AMF irradiation. Moreover, the scaffold could support proliferation and adipogenic differentiation of mesenchymal stem cells for adipose tissue reconstruction after anticancer treatment. In vivo regeneration experiments showed that the composite scaffolds could effectively maintain their structural integrity and facilitate the infiltration and proliferation of normal cells within the scaffolds. The composite scaffold possesses multi-functions and is attractive as a novel platform for efficient breast cancer therapy.

Additively manufactured Bi-functionalized bioceramics for reconstruction of bone tumor defects

Bone tissue exhibits critical factors for metastatic cancer cells and represents an extremely pleasant spot for further growth of tumors. The number of metastatic bone lesions and primary tumors that arise directly from cells comprised in the bone milieu is constantly increasing. Bioceramics have recently received significant attention in bone tissue engineering and local drug delivery applications. Additionally, additive manufacturing of bioceramics offers unprecedented advantages including the possibilities to fill irregular voids after the resection and fabricate patient-specific implants. Herein, we investigated the recent advances in additively manufactured bioceramics and ceramic-based composites that were used in the local bone tumor treatment and reconstruction of bone tumor defects. Furthermore, it has been extensively explained how to bi-functionalize ceramics-based biomaterials and what current limitations impede their clinical application. We have also discussed the importance of further development into ceramic-based biomaterials and molecular biology of bone tumors to: (1) discover new potential therapeutic targets to enhance conventional therapies, (2) local delivering of bio-molecular agents in a customized and "smart" way, and (3) accomplish a complete elimination of tumor cells in order to prevent tumor recurrence formation. We emphasized that by developing the research focus on the introduction of novel 3D-printed bioceramics with unique properties such as stimuli responsiveness, it will be possible to fabricate smart bioceramics that promote bone regeneration while minimizing the side-effects and effectively eradicate bone tumors while promoting bone regeneration. In fact, by combining all these therapeutic strategies and additive manufacturing, it is likely to provide personalized tumor-targeting therapies for cancer patients in the foreseeable future. STATEMENT OF SIGNIFICANCE: To increase the survival rates of cancer patients, different strategies such as surgery, reconstruction, chemotherapy, radiotherapy, etc have proven to be essential. Nonetheless, these therapeutic protocols have reached a plateau in their effectiveness due to limitations including drug resistance, tumor recurrence after surgery, toxic side-effects, and impaired bone regeneration following tumor resection. Hence, novel approaches to specifically and locally attack cancer cells, while also regenerating the damaged bony tissue, have being developed in the past years. This review sheds light to the novel approaches that enhance local bone tumor therapy and reconstruction procedures by combining additive manufacturing of ceramic biomaterials and other polymers, bioactive molecules, nanoparticles to affect bone tumor functions, metabolism, and microenvironment.

Composite Scaffolds of Gelatin and Fe3 O4 Nanoparticles for Magnetic Hyperthermia-Based Breast Cancer Treatment and Adipose Tissue Regeneration

Postsurgical treatment of breast cancer remains a challenge with regard to killing residual cancer cells and regenerating breast defects. To prepare composite scaffolds for postoperative use, gelatin is chemically modified with folic acid (FA) and used for hybridization with citrate-modified Fe₃ O₄ nanoparticles (Fe₃ O₄ -citrate NPs) to fabricate Fe₃ O₄ /gelatin composite scaffolds which pore structures are controlled by free ice microparticles. The composite scaffolds have large spherical pores that are interconnected to facilitate cell entry and exit. The FA-functionalized composite scaffolds have the ability to capture breast cancer cells. The Fe₃ O₄ /gelatin composite scaffolds possess a high capacity for magnetic-thermal conversion to ablate breast cancer cells during alternating magnetic field (AMF) irradiation. In addition, the composite scaffolds facilitate the growth and adipogenesis of mesenchymal stem cells. The composite scaffolds have multiple functions for eradication of residual cancer cells under AMF irradiation and for regeneration of resected adipose tissue when AMF is off.

Preparation of composite scaffolds composed of gelatin and Au nanostar-deposited black phosphorus nanosheets for the photothermal ablation of cancer cells and adipogenic differentiation of stem cells

Photothermal nanoparticles are important in photothermal therapy. Combining different nanoparticles can achieve a high photothermal capacity. In this study, composite nanoparticles composed of black phosphorus nanosheets (BPNSs) and gold nanostars (BP-AuNSs) were synthesized by using BPNSs as the reductant. AuNSs were deposited on the BPNSs. The BP-AuNSs were further hybridized with porous gelatin scaffolds to prepare gelatin-BP-AuNS composite scaffolds. The gelatin-BP-AuNS composite scaffolds promoted cell migration and distribution. The synergistic effects of the BPNSs and AuNSs endowed the gelatin-BP-AuNS composite scaffolds with excellent photothermal properties. The gelatin-BP-AuNS composite scaffolds eliminated cancer cells after near infrared laser exposure and supported the adipogenic differentiation of human mesenchymal stem cells. Thus, this gelatin-BP-AuNS composite scaffold holds promise for breast cancer therapy.

Doxorubicin-encapsulated thermosensitive liposome-functionalized photothermal composite scaffolds for synergistic photothermal therapy and chemotherapy

Synergistic therapy, especially the combination of photothermal therapy and chemotherapy, has been proposed as an effective therapeutic approach for breast cancer treatment. In this study, a smart platform for synergistic photothermal therapy and chemotherapy was developed by hybridizing doxorubicin-encapsulated thermosensitive liposomes and gold nanorods into porous scaffolds of gelatin and polyglutamic acid (Dox-lipo/AuNR/Gel/PGA). The Dox-lipo/AuNR/Gel/PGA composite scaffolds had good photothermal conversion and temperature-dependent doxorubicin release properties. Under near-infrared laser irradiation, the composite scaffolds increased the local temperature to not only kill the breast cancer cells in the scaffolds but also accelerate the release of doxorubicin to eliminate the breast cancer cells surrounding the scaffolds. In vitro cell culture and in vivo mouse experiments demonstrated that the synergistic effects of photothermal ablation combined with doxorubicin-induced inhibition of the breast cancer cells in and surrounding the composite scaffolds under near-infrared laser irradiation. Moreover, after drug release was complete, the composite scaffolds fostered human bone marrow-derived mesenchymal stem cell proliferation. These results suggested that the composite scaffolds provided synergistic photothermal therapy and chemotherapy for breast cancer cell elimination at the early stage and promoted stem cell activities at the late stage. Therefore, this composite scaffold holds great potential as a synergistic therapy platform for breast cancer treatment.

Photothermal scaffolds/surfaces for regulation of cell behaviors

Regulation of cell behaviors and even cell fates is of great significance in diverse biomedical applications such as cancer treatment, cell-based therapy, and tissue engineering. During the past decades, diverse methods have been developed to regulate cell behaviors such as applying external stimuli, delivering exogenous molecules into cell interior and changing the physicochemical properties of the substrates where cells adhere. Photothermal scaffolds/surfaces refer to a kind of materials embedded or coated with photothermal agents that can absorb light with proper wavelength (usually in near infrared region) and convert light energy to heat; the generated heat shows great potential for regulation of cell behaviors in different ways. In the current review, we summarize the recent research progress, especially over the past decade, of using photothermal scaffolds/surfaces to regulate cell behaviors, which could be further categorized into three types: (i) killing the tumor cells via hyperthermia or thermal ablation, (ii) engineering cells by intracellular delivery of exogenous molecules via photothermal poration of cell membranes, and (iii) releasing a single cell or an intact cell sheet via modulation of surface physicochemical properties in response to heat. In the end, challenges and perspectives in these areas are commented.

Folic Acid-Functionalized Composite Scaffolds of Gelatin and Gold Nanoparticles for Photothermal Ablation of Breast Cancer Cells

Photothermal therapy (PTT) has been developed as a useful therapeutic method for cancer treatment. Localization of PTT agents in cancer sites and targeting capacity are required to further increase therapeutic efficacy. In this study, gold nanoparticles (AuNPs) and gelatin were functionalized with folic acid (FA) and hybridized to prepare FA-functionalized gelatin-AuNPs composite scaffolds. AuNPs with rod and star shapes of three sizes (40, 70, and 110 nm) were used for the hybridization to investigate the influence of AuNPs shape and size. The composite scaffolds showed porous structures with good interconnectivity. Modification with FA increased capture capacity of the composite scaffolds. Hybridization with AuNPs rendered the composite scaffold a good photothermal conversion property under near-infrared (NIR) laser irradiation. Temperature change during laser irradiation increased with the laser power intensity and irradiation time. The shape and size of AuNPs also affected their photothermal conversion property. The composite scaffold of gold nanorods 70 (FA-G/R70) had the highest photothermal conversion capacity. Breast cancer cells cultured in the FA-G/R70 composite scaffold were killed under NIR laser irradiation. Mouse subcutaneous implantation further demonstrated the excellent photothermal ablation capability of FA-G/R70 composite scaffold to breast cancer cells. The FA-functionalized composite scaffolds were demonstrated a high potential for local PPT of breast cancer.

Targeted polyethylenimine/(p53 plasmid) nanocomplexes for potential antitumor applications

The development of the tumor-targeting ability of nanocarriers is of paramount importance for gene delivery into tumor lesions as well as to avoid biotoxicity. Here we report the synthesis of the polyethyleneimine-fluorescein isothiocyanate-folic acid (PEI-FITC-FA) polymer, which could condense the tumor suppressor pp53 to form nanocomplexes. These targeted nanocomplexes exhibited favorable physical properties including a small size of <100 nm, exploiting the enhanced permeability and retention effect and tumor-targeting ability by binding to the overexpressed FA receptors on tumor cell surfaces. In addition, once the nanocomplexes are accumulating in the tumor tissue, the target functional ligand, FA, can selectively recognize the over-expressed FA receptor and subsequently remain on the tumor cell surface, which can significantly promote the tumor cell uptake because of the time- and concentration-dependent internalization caused by the enhanced interaction between nanocomplex and tumor cell. Our results indicated that PEI-FITC-FA/pp53 nanocomplexes could be efficiently delivered into tumor cells, and subsequently induce tumor cell apoptosis. Thus, the targeted cationic polymer PEI-FITC-FA could be used as an advanced nanocarrier for gene delivery.

Preparation of PGA-PAE-Micelles for Enhanced Antitumor Efficacy of Cisplatin

Poly-γ-l-glutamic acid (PGA) is an outstanding drug carrier candidate owning to its excellent biodegradability and biocompatibility. The PGA carrier may shield toxic drugs from the body and enable the delivery of poorly soluble or unstable drugs and thereby minimize the side effects and improve drug efficacy. However, the limitation of PGA as a drug carrier is low drug loading efficiency (DLE), which is usually below 30%. In this study, we reported a chemical modification method using l-phenylalanine ethyl ester (PAE). PGA-PAE construct was amphiphilic, which could form micelles in aqueous solution. Cisplatin (CDDP), a commonly used chemotherapy drug whose side effect is well-known, was used as a model molecule to test the drug-loading efficiency of PGA-PAE. In this paper, two sizes of CDDP-loaded PGA-PAE micelles (M(Pt)-1 and M(Pt)-2) were prepared, the average diameter of M(Pt)-1 was 106 ± 6 nm and M(Pt)-2 was 210 ± 9 nm. The DLE of M(Pt)-1 and M(Pt)-2 was 52.8 ± 2.2 and 55.8 ± 1.2%, respectively. Both exhibited excellent biocompatibility, stability, and drug-retaining capability in physiological condition. The in vitro accumulative drug-releasing profile, IC₅₀ for different tumor cell lines HeLa, A549, and HCCC9810, and in vivo pharmacokinetics were similar between these two micelles; however, M(Pt)-1 showed higher tumor tissue retention and longer efficient cancer cell internalization time (up to 20 d). Our results suggested PGA-PAE micelle carriers reduced the toxicity of CDDP and its size at around 100 nm was the better for CDDP high-efficacy.